ATTACHMENT 17 - Montrose.EHRM.Addendum.01.B05.20260330.pdf

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD A/E:

CONSULTANT

321 4 5 6 7 8 9 10

TRIPLE C - The A/E Group 201 E. Jefferson Street, Suite 200 Syracuse, NY 13202

MAT PERKINS

(315) 484-5958

STAMP

Au to de sk

D oc s:

//6

-2

2-

M on tro se V

AM

C

E H

R M

IU

/6

-2

2-

0.

M on tro se .E

H R

M .M

EP

.B

.rv t 3/

/2

:5

7:

P M

05G-001

DRAWING INDEX 620-22-700

06/27/2025 M. PERKINS K.

MCDERMOTT

ISSUED FOR

CONSTRUCTION

(EHRM) INFRASTRUCTURE

UPGRADES

2094 Albany Post Road, Montrose, NY 10548

- DRAWING INDEX -

SHEET

NUMBER SHEET NAME INCLUDED IN 35% SD INCLUDED IN 65% DD INCLUDED IN 95% CD ISSUED FOR CONSTRUCTION

GENERAL

05G-000 COVER SHEET Yes Yes Yes Yes 05G-001 DRAWING INDEX Yes Yes Yes Yes 05G-010 GENERAL PROJECT NOTES Yes Yes Yes Yes 05G-012 GENERAL INDOOR AIR QUALITY NOTES Yes Yes Yes Yes

ICRA & LIFE SAFETY

05GI301 INFECTION CONTROL PLAN & INTERIM LIFE SAFETY - FIRST LEVEL No Yes Yes Yes 05GI302 INFECTION CONTROL & INTERIM LIFE SAFETY DETAILS No Yes Yes Yes

HAZARDOUS

05H-101 HAZARDOUS MATERIAL ABATEMENT PLAN - FIRST LEVEL No Yes Yes Yes

ARCHITECTURAL

05A-001 ARCHITECTURAL SYMBOLS, & GENERAL NOTES No Yes Yes Yes 05A-400 ARCHITECTURAL ENLARGED VIEWS - FIRST LEVEL No Yes Yes Yes 05A-401 ARCHITECTURAL EXTERIOR ELEVATIONS No No Yes Yes 05A-501 ARCHITECTURAL ROOF PLAN & DETAILS No Yes Yes Yes 05A-511 ARCHITECTURAL PARTITION AND FRAMING DETAILS No Yes Yes Yes 05A-512 ARCHITECTURAL PARTITION HEAD DETAILS No Yes Yes Yes 05A-531 ARCHITECTURAL CEILING DETAILS No Yes Yes Yes

INTERIORS

05IN101 INTERIOR FINISH PLAN, SIGNAGE & SCHEDULES No Yes Yes Yes

FIRE PROTECTION

05FX001 FIRE PROTECTION ABBREVIATIONS, SYMBOLS, AND DETAILS No Yes Yes Yes 05FX101 FIRE PROTECTION PLAN - FIRST LEVEL No Yes Yes Yes 05FX401 FIRE PROTECTION ENLARGED PLANS No Yes Yes Yes 05FX901 FIRE PROTECTION CUTSHEETS & BASIS OF DESIGN No Yes Yes Yes

MECHANICAL

05M-001 MECHANICAL ABBREVIATIONS AND SYMBOLS No Yes Yes Yes 05M-101 MECHANICAL PLAN - FIRST LEVEL No Yes Yes Yes 05M-401 MECHANICAL ENLARGED PLANS - DEMO & NEW No Yes Yes Yes 05M-501 MECHANICAL DETAILS No Yes Yes Yes 05M-701 MECHANICAL SCHEDULES No Yes Yes Yes 05M-801 MECHANICAL CONTROL SYMBOL LEGEND AND ABBREVIATIONS No Yes Yes Yes 05M-802 MECHANICAL CONTROL DIAGRAMS No Yes Yes Yes 05M-901 MECHANICAL CUTSHEETS & BASIS OF DESIGN No Yes Yes Yes 05M-902 MECHANICAL CUTSHEETS & BASIS OF DESIGN No Yes Yes Yes

ELECTRICAL

05E-001 ELECTRICAL ABBREVIATIONS AND SYMBOLS Yes Yes Yes Yes 05E-101 ELECTRICAL PLAN - GROUND LEVEL No Yes Yes Yes 05E-102 ELECTRICAL PLAN - FIRST LEVEL No Yes Yes Yes 05E-401 ELECTRICAL ENLARGED PLANS No Yes Yes Yes 05E-501 ELECTRICAL DETAILS Yes Yes Yes Yes 05E-601 ELECTRICAL ONE-LINE DIAGRAMS Yes Yes Yes Yes 05E-701 ELECTRICAL SCHEDULES Yes Yes Yes Yes 05E-702 ELECTRICAL SCHEDULES Yes Yes Yes Yes 05E-901 ELECTRICAL CUTSHEETS & BASIS OF DESIGN Yes Yes Yes Yes 05E-902 ELECTRICAL CUTSHEETS & BASIS OF DESIGN No No No Yes

TELECOMMUNICATION

05T-001 TELECOMMUNICATION ABBREVIATIONS AND SYMBOLS Yes Yes Yes Yes 05T-101 TELECOMMUNICATION PLAN - GROUND LEVEL Yes Yes Yes Yes 05T-102 TELECOMMUNICATION PLAN - FIRST LEVEL Yes Yes Yes Yes 05T-401 TELECOMMUNICATION ENLARGED PLANS No Yes Yes Yes 05T-501 TELECOMMUNICATION DETAILS Yes Yes Yes Yes 05T-502 TELECOMMUNICATION ROOM OIT TEMPLATE DETAILS Yes Yes Yes Yes 05T-503 TELECOMMUNICATION ROOM OIT TEMPLATE DETAILS Yes Yes Yes Yes 05T-504 TELECOMMUNICATION ROOM OIT TEMPLATE DETAILS No Yes Yes Yes 05T-601 TELECOMMUNICATION RISER DIAGRAMS Yes Yes Yes Yes 05T-603 TELECOMMUNICATION FIBER RISER DIAGRAM - NEW No Yes Yes Yes 05T-700 TELECOMMUNICATION SCHEDULE & RACK ELEVATIONS No Yes Yes Yes 05T-901 TELECOMMUNICATION CUTSHEETS & BASIS OF DESIGN Yes Yes Yes Yes 05T-902 TELECOMMUNICATION CUTSHEETS & BASIS OF DESIGN No No Yes Yes 05T-903 TELECOMMUNICATION CUTSHEETS & BASIS OF DESIGN No No Yes Yes

REFERENCE

05R-900 PHOTO REFERENCES Yes Yes Yes Yes Grand total: 53

# Revisions: Date:

1 ADDENDUM #1 03/30/2026

05G-011 REMOVED FROM

CONSTRUCTION DOCUMENTS

Ranjan Text Box

26862 SF

EXISTING BUSINESS -

TELECOM

ROOM

110110

COOLER

111111

KITCHEN

107107

SERVICE

UNIT

117117

ELEVATOR

NO. 1

E1E1

STAIR

HALL 3

108108

ELEVATOR

NO. 2

E2E2

FOOD

STORAGE

105105

PASSAGE

107Z-E107Z-E

PASSAGE

107Z-W107Z-W

DISH

STORAGE

112112

TOILET

110A110A

COOLER

113113

STORAGE

117A117A

FEC

E1 ▬ 74.4'

5 4

DISH

WASHING

ROOM NO.

114114

D.W.R.

STAIR

HALL

121Z121Z

REST.

120B120B

STOR. CL.

120A120A

OFFICE

120C120C

OFFICE

120A120A

OFFICE

120B120B

STORAGE

104104

REST.

101B101B

STORAGE

101A101A

STAIR

HALL NO.

122Z122Z

POT

ROOM

116116

NOURISHMENT

115115

SERVICE

UNIT

102A102A

LOBBY

NO. 2

101101

CONFERENCE

119A119A

FOOD &

NUTRITION

SERVICE

119119

PATIENT

DINING

ROOM NO.

102102

DISH

WASHING

ROOM NO.

106106

PATIENT

DINING

ROOM NO.

103103

LOBBY

NO. 1

120120

MRE

STORAGE

118118

INFECTION CONTROL / DUST

CONTROL PARTITION / BARRIER

INFECTION CONTROL/DUST CONTROL

EGRESS DOOR NON-TRANSFERRING

MULTI-SHEETED ADHESIVE FLOOR PADS

PATH OF DEMOLITION/TRASH

REMOVAL TRAVEL

CONSTRUCTION LIMIT LINE

NOT IN CONTRACT AREA

DEMOLITION

LASER PARTICLE COUNT LOCATION

LIFE SAFETY SYMBOLS

PATH OF TRAVEL

(FOR CUMULATIVE DISTANCES

REFER TO SCHEDULE)

EXIT LIGHTING

TM

FIRE EXTINGUISHER CABINET (FEC)

FIRE EXTINGUISHERS (FE)

FIRE HOSE CABINETS (FHC)

HEAT DETECTOR

SMOKE DETECTOR

DIRECTION OF EGRESS

APPLICABLE BUILDING CODES

2024 NFPA 101 LIFE SAFETY CODE & 2025 NFPA 72 NATIONAL

FIRE ALARM AND SIGNALING CODE & 2025 NFPA 13 STANDARD

FOR INSTALLATION OF SPRINKLER SYSTEMS. EXCEPTION OF

NFPA 5000 AND NFPA 900

2024 INTERNATIONAL MECHANICAL CODE (IPC)

OCCUPATIONAL, SAFETY AND HEALTH ADMINISTRATION

(OSHA) STANDARDS.

VA SEISMIC DESIGN REQUIREMENTS, H-18-8

2026 NATIONAL ELECTRICAL CODE (NEC)

2024 INTERNATIONAL PLUMBING CODE (IPC)

ASME BOILER AND PRESSURE VESSEL CODE

ASME CODE FOR PRESSURE PIPING

ARCHITECTURAL BARRIERS ACT ACCESSIBILITY STANDARDS

(ABAAS) INCLUDING VA SUPPLEMENT, BARRIER FREE DESIGN

GUIDE (PG-18-13)

BUILDING CODE REQUIREMENTS FOR REINFORCED

CONCRETE, AMERICAN CONCRETE INSTITUTE AND

COMMENTARY (ACI 318)

MANUAL OF STEEL CONSTRUCTION, LOAD AND RESISTANCE

FACTOR DESIGN SPECIFICATIONS FOR STRUCTURAL STEEL

BUILDINGS, AMERICAN INSTITUTE OF STEEL CONSTRUCTION

(AISC)

ENERGY POLICY ACT OF 2005 (EPACT)

DOE INTERIM FINAL RULE: ENERGY CONSERVATION

STANDARDS FOR NEW FEDERAL, COMMERCIAL AND MULTI-

FAMILY HIGH-RISE RESIDENTIAL BUILDINGS AND NEW LOW-

RISE RESIDENTIAL BUILDINGS, 10 CFR PARTS 433, 434 AND 435

FEDERAL LEADERSHIP IN HIGH PERFORMANCE AND

SUSTAINABLE BUILDINGS: MEMORANDUM OF

UNDERSTANDING (MOU)

EXECUTIVE ORDER 13423: STRENGTHENING FEDERAL

ENVIRONMENTAL, ENERGY, AND TRANSPORTATION

MANAGEMENT

THE PROVISIONS FOR CONSTRUCTION AND SAFETY SIGNS.

STATED IN THE GENERAL REQUIREMENTS SECTION 01 00 00

AND 01 35 26 OF THE VA MASTER CONSTRUCTION

SPECIFICATION.

VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY –

ASHRAE STANDARD 62.1-2025; MEDICAL SPACES - ASHRAE

170-2025, NON-MEDICAL SPACES - ASHRAE 62.1-2025

SAFETY STANDARD FOR REFRIGERATION SYSTEMS – ASHRAE

STANDARD 15–2024

2024 INTERNATIONAL BUILDING CODE (IBC) WHERE DIRECTED

BY VA STANDARDS

UNLESS NOTED OTHERWISE, CURRENT EDITION OF APPLICABLE

STANDARD OR CODE SHALL BE USED

APPLICABLE BUILDING GUIDES

VA FIRE PROTECTION DESIGN GUIDE, 9TH EDITION (2023)

BUILDING CODE:

CONSTRUCTION TYPE:

TYPE II (222) PER NFPA 220, Chapter 4

TYPE OF BUILDING REHABILITATION: MODIFICATION, CHAPTER 43.

FIRE RESISTIVE CONSTRUCTION (NFPA 220 Table 4.1.1)

FIRE RESISTANCE RATING REQUIREMENTS FOR BUILDING

ELEMENTS:

STRUCTURAL FRAME 2 HOURS

NON-BEARING WALLS 0 HOURS

BEARING WALLS 2 HOURS

FLOORS 2 HOURS

ROOFS/ CEILINGS 1 HOURS

FIRE RESISTIVE CONSTRUCTION FOR OCCUPANCY (VA & NFPA 101)

FIRE RESISTANCE RATING REQUIREMENTS FOR SPACES BY

FUNCTION:

ELECTRICAL CLOSETS (DEPENDENT ON EQUIPMENT SIZE)

SMOKE COMPARTMENTS 1/2 HOUR

SOILED UTILITY ROOMS 1 HOUR

VERTICAL SHAFTS / STAIRS 2 HOURS

MEDICAL GAS / HAZARDOUS 1 HOUR

STORAGE

CLASSIFICATION OF OCCUPANCY:

EXISTING: BUSINESS Occupancy per Chapter 39

39.1.1.6 Where construction, alteration, or demolition operations are conducted, the provisions of 4.6.10.2 shall apply

39.1.2 Business occupancies shall include all buildings and structures or parts thereof with occupancy defined in 6.1.11

BUILDING OCCUPANCY TYPE:

EXISTING - BUSINESS OCCUPANCY

6.1.14.1.3 Where incidental to another occupant, areas used as follows shall be permitted to be considered part of the predominant occupancy and shall be subject to the provisions of the Code that apply to the predominant occupancy:

(1) Mercantile, BUSINESS, industrial, or storage use

6.1.14.3 Mixed Occupancies

6.1.14.3.2 The building shall comply with the most restrictive requirements of the occupancies involved, unless separate safeguards are approved.

Table 6.1.14.4.1 (a) - separation of occupancies - 2 Hr between Health Care and Business

6.2 Hazard of Contents.

6.2.1.3 For the purpose of this Code, where difference degrees of hazard of contents exist in different parts of a building or structure, the most hazardous shall govern the classification, unless hazardous areas are separated or protected as specified in Section 8.7 and the applicable sections of Chapters 11 through 43.

EXIT ACCESS TRAVEL DISTANCE:

39.2.6.2 The travel distance between any point in a room and an exit shall not exceed 200 ft.

39.2.6.3 The maximum travel distance...shall not exceed 300 ft in buildings protected throughout by an approved automatic sprinkler system in accordance with Section 9.7.

BUSINESS OCCUPANCY; PROTECTED = 300'-0"

OCCUPANT LOAD:

39.1.7 Occupant Load. The occupant load, in number of persons for whom means of egress and other provisions are required, shall be determined on the basis of the occupant load factors of Table 7.3.1.2 that are characteristic of the use of the space, or shall be determined as the maximum probable population of the space under consideration, whichever is greater.

MEANS OF EGRESS:

39.2.3 Capacity of Means of Egress.

39.2.3.1 The capacity of any required means of egress shall be determined in accordance with the provisions Section 7.3.

39.2.3.2 The clear width of any corridor or passageway serving an occupant load of 50 or more shall not be less than 44 in. (1120 mm).

39.2.4 Number of Means of Egress.

39.2.4.1 Means of egress shall comply with all of the following: except as permitted by 39.2.4.2-6

1) the number of means of egress shall be in accordance with section 7.4

2) not less than two separate exits shall be provided on every story.

3) Not less than two separate exits shall be accessible from every part of every story.

39.2.5.3 In building protected throughout by and approved supervised automatic sprinkler system, Dead-end corridors shall not exceed 50 ft.

PROTECTION OF VERTICAL OPENINGS:

39.3.1 Protection of Vertical Openings.

39.3.1.1 Any vertical opening shall be enclosed or protected in accordance with Section 8.6, unless otherwise permitted.

PROTECTION FROM HAZARDS:

39.3.2 Protection from Hazards.

39.3.2.1 Hazardous Areas - Any hazardous areas shall be protected in accordance with Section 8.7

39.3.2.2 The following areas shall be considered hazardous areas and shall be protected by fire barriers having a minimum 1-hour fire resistance rating in accordance with Section 8.3:

(1) Boilder and fuel-fired heater rooms

(2) Central/bulk laundries larger than 100 ft2

(3) Paint Shops

(4) Physical plant maintenance shops

(5) Rooms with soiled linen in volume exceeding 64 gal

(6) Rooms with collected trashed in volume exceeding 64 gal.

(7) Storage rooms larger than 100 ft2 and storing combustible material

The following areas shall be considered hazardous areas and shall be protected by smoke partitions in accordance with Section 8.4:

(1) Laboratories employing flammable or combustible materials in quantities less than those that would be considered a severe hazard.

(2) Storage rooms larger than 50 ft2 but not exceeding 100 ft2 and storing combustible material.

39.3.2.5 Medical Gas. Medical gas storage shall be in accordance with Section 8.7 and the provisions of NFPA 99, Health Care Facilities Code, applicable to operation, maintenance, and testing.

39.3.5 Portable fire extinguishers shall be provided in all health care occupancies facilities in accordance with Section 9.9.

PARKING SUMMARY:

NO ADDITIONAL PARKING ADDED

WIDTH PROVIDEDP: XX"

R: XX" WIDTH REQUIRED

PARTITION RATING GRAPHICS:

4 HR FIRE BARRIER

3 HR FIRE BARRIER

2 HR FIRE & SMOKE BARRIER

2 HR FIRE BARRIER

2 HR FIRE BARRIER/SHAFT

1 HR FIRE & SMOKE BARRIER

1 HR FIRE BARRIER

1 HR FIRE BARRIER/SHAFT

SMOKE PARTITION (NON RATED)

NON RATED

PARTITION RATING GRAPHIC DESIGNATION: PRIORITY

1 HIGHEST

5 LOWEST

PARTITIONS REQUIRED TO BE SMOKE RESISTANT, FIRE

RESISTANT, OR BOTH FIRE AND SMOKE RESISTANT ARE SHOWN

GRAPHICALLY ON PLANS WITH HATCH PATTERNS.

X - XX'

# ICRA SYMBOLSKEYNOTES

TN

PN

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD A/E:

STAMPCONSULTANT

321 4 5 6 7 8 9 10

TRIPLE C - The A/E Group 201 E. Jefferson Street, Suite 200 Syracuse, NY 13202

MAT PERKINS

(315) 484-5958

Au to de sk

D oc s:

//6

-2

2-

M on tro se V

AM

C

E H

R M

IU

/6

-2

2-

0.

M on tro se .E

H R

M .A

R C

H .B

.rv t

-0 3-

7:

:2

05GI301

INFECTION CONTROL PLAN & INTERIM LIFE

SAFETY - FIRST LEVEL

620-22-700

06/27/2025 M. Perkins K. McDermott

ISSUED FOR

CONSTRUCTION

(EHRM) INFRASTRUCTURE

UPGRADES

2094 Albany Post Road, Montrose, NY 10548

1" = 10'-0"F2 INFECTION CONTROL PLAN & INTERIM LIFE SAFETY - FIRST LEVEL

PATH OF TRAVEL SCHEDULE - FIRST LEVEL

Mark From Room To Room Type of Travel Path Length

LEVEL 1

(P-o-T) Distance to Exits

E1 TELECOM ROOM 110 STAIR HALL 3 108 (P-o-T) Distance to Exits 74' - 5"

1 ELEVATORS ARE TO REMAIN OPERATIONAL AT

ALL TIMES

2 ONE ELEVATOR TO BE DESIGNATED FOR

CONTRACTOR USE. CONTRACTOR TO PROTECT /

REPAIR ALL FINISHES AND FOLLOW PROPER ICRA

REMOVAL PROTOCOLS FOR ANY MATERIALS

REMOVED FROM SITE THROUGH ELEVATOR

3 DEBRIS REMOVAL PATH TO ELEVATOR

4 STAIRS ARE TO REMAIN OPERATIONAL AT ALL

TIMES FOR EMERGENCY EGRESS ONLY. THEY

ARE NOT TO BE USED FOR ANY CONSTRUCTION

ACTIVITY.

5 TEMPORARY CONSTRUCTION BARRIER

6 PROVIDE TEMPORARY DUST TIGHT BARRIER

AROUND WORK AREA DURING ANY ACTIVITIES

WHICH PRODUCE DUST - TYPICAL

7 ANTEROOM - SEE INFECTION CONTROL & INTERIM

LIFE SAFETY DETAILS

8 TEMPORARY CONSTRUCTION BARRIER DOOR

WITH CLOSER AND LATCH AND WALK OFF MATS

9 MAINTAIN EXIT PATHWAYS FOR OCCUPANTS AT

ALL TIMES

10 SOLID GRAY HATCH DENOTES LIMITED WORK

AREA - SEE MEP AND TELECOM DRAWINGS FOR

CABLING SCOPE, TYP.

AREA OCCUPANCIES

LEVEL Name Area SF

Occupancy Requirements

OL

Occupancy

(IBC) Occupancy (NFPA) OLF Fixed Seats

FIRST LEVEL EXISTING BUSINESS 26862 SF B Business 150 SF 0 179

NOTE:

DEBRIS REMOVAL:

COORDINATE REMOVAL OF MATERIALS ON THIS FLOOR WITH

ASBESTOS REPORT AND PLAN.

CONFIRM WITH COR FOR FINAL PLAN AND PROCEDURE OF

MATERIAL REMOVAL WITH ANTEROOMS, HEPA FILTRATION, ICRA

PROTOCOLS, AND ROUTE THRU OCCUPIED SPACES; PRIOR TO

REMOVAL OF ANY MATERIALS.

SECURE STAIRWELLS FROM UNAUTHORIZED ENTRY DURING

CONSTRUCTION.

LIFE SAFETY:

NEW WORK DOES NOT CHANGE EXISTING SMOKE

COMPARTMENTS, EXIT PATHWAYS, OR EXITS.

# Revisions: Date:

1 ADDENDUM #1 03/30/2026

TEMPORARY WALL TO EXTEND

AND BE SEALED TO DECK /

FLOOR ABOVE WHEN RATED

ENCLOSURE REQUIRED

FLOOR LINE

CEILING SYSTEM AS

SCHEDULED

EXISTING STRUCTURE

FI

NI

SH

ED

F

LO

OR

T O

UN

DE

RS

ID

E

OF

S

TR

UC

TU

RE

VE

RI

FY

F

LO

OR

T

O

FL

OO

R

HE

IG

HT

RENOVATED SPRINKLER

SYSTEM

WEEKLY CHANGED

OR MORE AS

NEEDED PRE-FILTER

FLEX DUCTMONTHLY CHANGED

HEPA FILTER

HEPA NEGATIVE AIR

UNIT

PROVIDE STICKY MATS (CHANGED END OF

EVERY SHIFT OR MORE IF NECESSARY TO

MAINTAIN CLEANLINESS).

PRESSURE INDICATOR SHALL BE AT

0.03 OR GREATER USING A DIGITAL

MANOMETER WITH DATA LOGGING. IF

NOT VERIFY ALL OPENING SUCH AS

DOOR ARE CLOSED AND/OR CHANGE

NEGATIVE AIR PRE-FILTER. DO NOT USE

A "BALL IN THE WALL" OR ANALOG

OTHER PRESSURE INDICATOR.

SUPPLY DUCTS EITHER

KEEP RUNNING OR

COVER WHEN NOT

RUNNING TO KEEP

DUST OUT.

A

V

OTAPE ALL SERVICES

TO PROTECT AGAINST

CONTAMINATION

E

FIRE EXTINGUISHER ON

PORTABLE FLOOR BRACKET

(SHALL REQUIRE MORE THAN

ONE.)

PUBLIC AREA

CONSTRUCTION AREA

ANTE ROOM

HARD BARRIER ALL THE WAY TO

DECK ABOVE

SIZE ANTE ROOM TO PROVIDE

SPACE FOR EQUIPMENT STAGING,

CART CLEANING, WORKERS' PPE

AND CLEANING, INCLUDING A HEPA

CLOTHING VACUUM

ROUTE DUCT TO EXTERIOR - SEE

PLANS FOR PROPOSED ROUTES -

CONFIRM ROUTE WITH ON-SITE

STAFF PRIOR TO INSTALLATION.

DISCHARGE AT A DISTANCE OF 25

FEET OR GREATER FROM

ENTRANCES, AIR INTAKES AND

OPERABLE WINDOWS. DO NOT

DIRECT EXHAUST INTO ANY

BUILDING SHARED EXHAUST

SYSTEM.

ANTE ROOM FAN

DOOR TO BE SELF-CLOSING AND

SELF-LATCHING - 45 MIN. FIRE

RATING PER NFPA

D7

05GI302

INFECTION CONTROL / DUST

CONTROL PARTITION / BARRIER

INFECTION CONTROL/DUST CONTROL

EGRESS DOOR NON-TRANSFERRING

MULTI-SHEETED ADHESIVE FLOOR PADS

PATH OF DEMOLITION/TRASH

REMOVAL TRAVEL

CONSTRUCTION LIMIT LINE

NOT IN CONTRACT AREA

DEMOLITION

LASER PARTICLE COUNT LOCATION

PATH OF TRAVEL/DISTANCE TO EXITS

1/4" = 1'-0"F7 TYPICAL CONSTRUCTION LAYOUT- CLASS IV

1/2" = 1'-0"D7 CROSS SECTION A'-A'- CLASS IV

NTSF2 TYPICAL ICRA PRODUCTS

TN

PN

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD A/E:

STAMPCONSULTANT

321 4 5 6 7 8 9 10

TRIPLE C - The A/E Group 201 E. Jefferson Street, Suite 200 Syracuse, NY 13202

MAT PERKINS

(315) 484-5958

Au to de sk

D oc s:

//6

-2

2-

M on tro se V

AM

C

E H

R M

IU

/6

-2

2-

0.

M on tro se .E

H R

M .A

R C

H .B

.rv t

-0 3-

7:

:2

05GI302

INFECTION CONTROL & INTERIM LIFE SAFETY

DETAILS

620-22-700

06/27/2025 M. Perkins K. McDermott

ISSUED FOR

CONSTRUCTION

(EHRM) INFRASTRUCTURE

UPGRADES

2094 Albany Post Road, Montrose, NY 10548

A.

B.

C.

D.

E.

F.

G.

H.

I.

J.

K.

L.

M.

N.

O.

P.

Q.

R.

IMPLEMENT INFECTION CONTROL RISK ASSESSMENT (ICRA)

PROCEDURES AS PER THE MONTROSE VA ICRA PLAN AND AS

DIRECTED BY THE CONTRACTING OFFICER REPRESENTATIVE

(COR).

COORDINATE ALL DEMOLITION/ CONSTRUCTION DEBRIS PATH

OF TRAVEL AND INTERIM LIFE SAFETY MEASURES (ILSM) WITH

THE COR. ALL INTERIOR DOORS THAT LEAD TO THE

CONSTRUCTION SITE SHALL BE POSTED AS PER THE ISLM PLAN.

OBTAIN INFECTION CONTROL PERMIT PRIOR TO BEGINNING

WORK.

THE ONE HOUR FIRE RATED CONSTRUCTION BARRIERS SHALL

BE CONSTRUCTED PRIOR TO BEGINNING OTHER WORK.

CONSTRUCT ANTEROOM AT ENTRANCES TO CONSTRUCTION

AREAS AND REQUIRE ALL CONSTRUCTION PERSONNEL TO PASS

THROUGH THIS ROOM TO BE VACUUMED WITH HEPA VACUUM

CLEANER PRIOR TO LEAVING THE SITE.

FIRE PROTECTION SYSTEMS SHALL REMAIN FUNCTIONAL FOR

OCCUPIED AREAS ON THE FLOOR.

PROVIDE FIRE EXTINGUISHERS IN CONSTRUCTION AREAS;

REVIEW WITH COR AND VA SAFETY GROUP.

MAINTAIN EXIT LIGHTS IN CONSTRUCTION AREA.

MAINTAIN NEGATIVE AIR PRESSURE IN CONSTRUCTION AREA AT

ALL TIMES (24/7). WHETHER OCCUPIED OR NOT, THROUGHOUT

DURATION OF PROJECT USING HEPA EQUIPPED AIR FILTRATION

UNITS.

CONSTRUCTION AREA SHALL REMAIN ISOLATED FROM THE

OTHER AREAS OF THE MEDICAL CENTER; NO RETURN AIR OR

EXHAUST SHALL PASS INTO THE AREAS OUTSIDE THE

CONSTRUCTION AREA. ISOLATE HVAC SYSTEM WITHIN

CONSTRUCTION AREA TO PREVENT CONTAMINATION OF

EXISTING DUCT SYSTEM.

REDIRECT ALL MEDICAL CENTER PERSONNEL. PATIENTS AND

VISITORS SO THEY DO NOT EXIT THROUGH THE CONSTRUCTION

AREA. PROVIDE SIGNS ON DOORS INTO THE CONSTRUCTION

AREA THAT READS: "CONSTRUCTION AREA-DO NOT ENTER".

GENERAL CONTRACTOR SHALL MAINTAIN DAILY LOGS AND KEEP

A CURRENT HOT WORK PERMIT ON SITE.

TACKY MATS SHALL BE PLACED AT ALL DOORS INTO THE

CONSTRUCTION AREA AND SHALL BE MONITORED TO MAKE

SURE THEY REMAIN EFFECTIVE.

MAINTAIN A CLEAN AND ORDERLY CONSTRUCTION AREA. ALL

DEBRIS REMOVAL SHALL BE IN COVERED CARTS AND/OR

CONTAINERS.

SEAL ALL HOLES, PUNCTURES, AND PENETRATIONS FROM PIPES

AND CONDUITS APPROPRIATELY AND IMMEDIATELY TO MAINTAIN

DUST PROTECTION AND NEGATIVE AIR PRESSURE.

MAINTAIN STAFFING AND EQUIPMENT INCLUDING DUST MOPS,

WET MOPS, BROOMS, BUCKETS AND CLEAN WIPING RAGS FOR

CLEANING FINE DUST FROM FLOORS AND ADJACENT OCCUPIED

AREAS. ANY DUST TRACKED OUTSIDE OF CONSTRUCTION AREA

SHALL BE CLEANED IMMEDIATELY.

AFTER COMPLETION OF WORK: VACUUM CONSTRUCTION AREA

WITH HEPA FILTERED VACUUMS, WET MOP WITH DISINFECTANT,

REMOVE CONSTRUCTION BARRIERS (UPON APPROVAL). PATCH

OR REPAIR ANY DAMAGE FROM CONSTRUCTION BARRIER

REMOVAL AND REMOVE ISOLATION OF HVAC SYSTEM.

CONSTRUCTION BARRIERS SHALL NOT BE REMOVE UNTIL

PROJECT IS COMPLETED AND INSPECTED BY VA SAFETY

PERSONNEL, INFECTION CONTROL GROUP, AND COR.

ICRA NOTES:

ICRA SYMBOL LEGENDINFECTION CONTROL RISK

ASSESSMENT:

TABLE 1: CONSTRUCTION, RENOVATION AND/OR MAINTENANCE

ACTIVITY CATEGORY

IDENTIFY THE CATEGORY OF CONSTRUCTION PROJECT

CATEGORY A: INSPECTION AND/OR FACILITY UPKEEP

CATEGORY B: GENERAL MAINTENANCE AND REPAIR WORK

CATEGORY C: SMALL-SCALE CONSTRUCTION, RENOVATION, AND/OR

MAINTENANCE

CATEGORY D: LARGE-SCALE CONSTRUCTION, RENOVATION, OR

MAINTENANCE

THIS PROJECT: CATEGORY D

TABLE 2: AFFECTED AREA ASSESSMENT

TABLE 3: PATIENT RISK CATEGORY

IDENTIFY THE PATIENT RISK CATEGORY FOR EACH AREA LISTED IN

TABLE 2. OF THE PATIENT RISK CATEGORIES IDENTIFIED, THE ONE WITH

THE GREATEST RISK SHALL BE SELECTED AS THE OVERALL PATIENT

RISK CATEGORY FOR THE ACTIVITY.

LOW RISK: NON-PATIENT CARE AREAS

MEDIUM RISK: PATIENT CARE SUPPORT AREAS

HIGH RISK: PATIENT CARE AREAS

HIGHEST RISK: PROCEDURAL, INVASIVE, STERILE SUPPORT AND HIGLY

COMPROMISED PATIENT CARE AREAS

THIS PROJECT: HIGH RISK

CL

AS

S

II

Construction Activity Category

RISK GROUP

LOW RISK

MEDIUM RISK

HIGH RISK

HIGHEST RISK

I II II III

I II III IV

I II IV IV

II III IV IV

A

STEP 1:

IDENTIFY SPECIFIC SITE OF ACTIVITY, FOR EXAMPLE, PATIENT

ROOMS, MEDICATION ROOM, AND SO ON.

STEP 2:

IDENTIFY ISSUES RELATED TO: VENTILATION, PLUMBING, AND

ELECTRICAL IN TERMS OF THE OCCURRENCE OF PROBABLE

OUTAGES.

STEP 3:

IDENTIFY CONTAINMENT MEASURES, USING PRIOR

ASSESSMENT. WHAT TYPES OF BARRIERS (FOR EXAMPLE,

SOLIDS WALLS)? WILL HEPA FILTRATION BE REQUIRED?

STEP 4:

CONSIDER POTENTIAL RISK OF WATER DAMAGE. IS THERE A

RISK DUE TO COMPROMISING STRUCTURAL INTEGRITY (FOR

EXAMPLE, WALL, CEILING, ROOF)?

NOTE: RENOVATION/CONSTRUCTION AREA SHALL BE

ISOLATED FROM THE OCCUPIED AREAS DURING

CONSTRUCTION AND SHALL BE NEGATIVE WITH RESPECT TO

SURROUNDING AREAS.

STEP 5:

WORK HOURS: CAN OR WILL THE WORK BE DONE DURING

NON-PATIENT-CARE HOURS?

STEP 6:

DO PLANS ALLOW FOR ADEQUATE NUMBER OF

ISOLATION/NEGATIVE AIRFLOW ROOMS?

STEP 7:

DO THE PLANS ALLOW FOR THE REQUIRED NUMBER AND TYPE

OF HAND-WASHING SINKS?

STEP 8:

DOES THE INFECTION PREVENTION AND CONTROL STAFF AGREE

WITH THE MINIMUM NUMBER OF SINKS FOR THIS PROJECT?

(VERIFY AGAINST FACILITY GUIDELINES INSTITUTE (FGI) DESIGN

AND CONSTRUCTION GUIDELINES FOR TYPES AND AREA.)

STEP 9:

DOES THE INFECTION PREVENTION AND CONTROL STAFF

AGREE WITH THE PLANS RELATIVE TO CLEAN AND SOILED

UTILITY ROOMS?

STEP 10:

PLAN TO DISCUSS THE FOLLOWING CONTAINMENT ISSUES WITH

THE PROJECT TEAM, FOR EXAMPLE, TRAFFIC FLOW,

HOUSEKEEPING, DEBRIS REMOVAL (HOW AND WHEN).

Affected Area Assessment

AREA

Activity Area Area Above Area Below Adjacent Area

TR

SEE PLAN

SVC TYPE POC POC CONTACT INFO

SEE PLAN

SEE PLAN

Walter Hoffman (914) 208-6275

MATCH THE OVERALL PATIENT RISK CATEGORY WITH THE PLANNED

CONSTRUCTION PROJECT CATEGORY ON THE FOLLOWING MATRIX, TO

FIND THE CLASS OF PRECAUTIONS (I, II, III OR IV) OR LEVEL OF

INFECTION CONTROL ACTIVITIES REQUIRED.

THIS PROJECT: CATEGORY IV

TABLE 4: LEVEL OF INFECTION PREVENTION AND CONTROL

PRECAUTIONS

B C D

TABLE 5: REQUIRED INFECTION PREVENTION AND CONTROL MEASURES

BY LEVEL OF PRECAUTIONS

NOTE: LIST IS CUMULATIVE FROM CLASS I THROUGH CLASS IV)

TABLE 6: MINIMUM INFECTION PREVENTION AND CONTROL MEASURES

REQUIRED UPON COMPLETION OF THE ACTIVITY

1.

2.

1.

2.

A.

B.

C.

D.

E.

1.

2.

1.

2.

3.

1.

Construction areas must be inspected by an infection preventionist and engineering representative (and others as determined by the facility) for final activity/project close out and removal of infection prevention and control measures

Work Area Cleaning:

Clean work areas including all environmental surfaces, high horizontal surfaces and flooring materials Check all supply and return air registers for dust accumulation on upper surfaces as well as air diffuser surfaces

Removal of Critical Barriers:

Critical barriers must remain in place during all work involving drywall removal, creation of dust and activities beyond simple touch-up work. The barrier may NOT be removed until a work area cleaning has been performed. Additional cleaning may be needed after removal of barrier All (plastic or hard) barrier removal activities must be completed in a manner that prevents dust release. Use the following precautions when removing hard barriers:

Carefully remove screws and painter tape.

If dust will be generated during screw removal, use hand-held HEPA vacuum.

Drywall cutting is prohibited during removal process Clean all stud tracks with HEPA vacuum before removing outer hard barrier Use a plastic barrier to enclose area if dust could be generated

Negative Air Requirements:

The use of negative air must be designated to remove contaminants from the work area Negative air devices (fans, filters, monitoring and documentation equipment) must remain operational at all times and in place for a period after completion of dust creating activities to remove contaminants from the work area and before removal of critical barriers.

HVAC Systems:

Upon removal of critical barriers, remove isolation of HVAC system in areas where work is being performed Verify that HVAC systems are clean and operational.

Verify and document through a TAB the HVAC systems meets original airflow and air exchange design specifications

Water Systems:

Until the potable water system is activated and in use, flushing shall continue at least twice per week in accordance with VHA directive 1061.

CL

AS

S

III

IV

13.

14.

15.

16.

17.

18.

Ensure availability of equipment for cleaning hands Construct and complete critical barriers meeting NFPA 241 requirements.

Barriers must extend to the ceiling or if ceiling tile is removed, to deck above All (plastic or hard) barrier construction activities must be completed in a manner that prevents dust release. Plastic barriers must be effectively affixed to floor and ceiling (or floor/roof deck above) and secure from movement or damage.

Seal all penetrations in containment barriers, including floors and ceiling, using approved materials (UL schedule firestop if applicable for barrier type) Maintain .01 inches /water gauge negative pressurization of the entire workspace by use of HEPA exhaust air systems directed outdoors, or comply with the alternative method outlined in Appendix A of this document.

These control measures must be maintained continuously 24/7 for the duration of the project. HEPA filtered exhaust if discharged directly to the outdoors must be at a istance of 25 feet or greater from entrances, air intakes and operable windows. Exhausting discharged air into shared or recirculating HVAC systems, or other shared exhaust systems (e.g., bathroom exhaust) is prohibited Install a differential pressure sensing device (e.g., magnehelic, manometer, or digital monitoring) on exterior of work containment to continually monitor and document negative pressurization. The “ball in the wall” or similar apparatus are not acceptable

4.

5.

6.

7.

8.

9.

10.

11.

12.

Provide active means to control airborne dust from dispersing into occupied areas and/or water mist surface to control dust (e.g., Mobile Dust Containment Cart or some other system)Ensure worker clothing is clean and free of visible dust before leaving the work area Remove or isolate air diffusers (supply and return) to protect the HVAC system from dust and reduce air turbulence. Rebalance system to address diffuser isolation When the work involves or impacts potable water systems including stagnation due to reduced usage, the piping shall be flushed twice a week or isolated from the main system Seal doors to prevent dust migration Contain all trash and debris in the work area. Perform daily cleaning and disposal of trash (covered) from work area using an identified exit route.

Any equipment, tools, or materials removed from the work area must be in sealed containers and/or cleaned of dust and debris prior to removal from the area Nonporous/smooth and cleanable containers (with a hard lid) must be used to transport trash and debris from the construction areas. These containers must be damp-wiped cleaned and free of visible dust/debris before leaving the contained work area Install a sticky (dust collection) mat at entrance of contained work area based on facility policy. Sticky mats just be changed routinely and when visibly soiled.

Maintain clean surroundings when area is not contained by damp mopping or HEPA vacuuming surfaces at least daily

1.

2.

3.

Perform work activity in a manner that does not create dust Immediately replace ceiling tile, close access panels, etc. upon completion.

Any materials and equipment being brought into the facility must be free of contaminants and loose material

19.

20.

21.

22.

Barriers must be hard barriers unless temporary to install final barrier.

Containment must include an anteroom to ensure pressure control.

Anteroom must be large enough for equipment staging, cart cleaning, workers’ PPE and cleaning.

Worker clothing and/or PPE must be removed or clean and free of visible dust before leaving the work area anteroom. HEPA vacuuming of clothing or use of cover suits is acceptable Workers must wear shoe covers or have a method to clean shoes in anteroom. Shoe covers must be removed prior to exiting the anteroom to the occupied space (non-work area). Damaged shoe covers must be changed immediately.

CL

AS

S I

CL

AS

S

III

CL

AS

S

IV

YES

N/A

N/A

N/A

N/A

AFTER-HOURS WORK TO BE COORDINATED WITH VA COR

COORDINATE WITH VA COR ON PATIENT CARE FLOORS

TEMPORARY WALLS TO BE 1-HR RATED - PREFABRICATED

WALLS / DOOR PREFERRED

TECHNOLOGY AND ELECTRICAL FOCUSED WORK -

MINIMAL PLUMBING OR MECHANICAL IMPACT

MINOR INTERIOR RENOVATION IN EXISTING BUSINESS

OCCUPANCY AREAS - SEE PLAN

Walter Hoffman (914) 208-6275 Walter Hoffman (914) 208-6275 Walter Hoffman (914) 208-6275

1 ADDENDUM #1 03/27/202603/30/2026

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

HAZARDOUS MATERIAL ABATEMENT GENERAL NOTES

ALL HAZARDOUS MATERIAL REMOVAL SHALL BE PERFORMED IN

ACCORDANCE WITH THE PROJECT SPECIFICATIONS AND ALL APPLICABLE

FEDERAL, STATE AND LOCAL LAWS, REGULATIONS, ORDERS AND

DIRECTIVES INCLUDING WITHOUT LIMITATIONS THOSE OF THE

RESPONSIBLE STATE OF NEW YORK AGENCIES, U.S. ENVIRONMENTAL

PROTECTION AGENCY, U.S. DEPARTMENT OF LABOR, OCCUPATIONAL

SAFETY AND HEALTH ADMINISTRATION, NATIONAL INSTITUTE OF

OCCUPATIONAL SAFETY AND HEALTH, STATE OF NEW YORK DEPARTMENT

OF PUBLIC HEALTH, AND THE STATE OF NEW YORK DEPARTMENT OF

ENVIRONMENTAL CONSERVATION

CONTRACTOR SHALL COMPLY WITH OSHA REGULATIONS FOR SILICA

DUST CONTROL 29 CFR 1926.1153, 29 CFR 1910.134

CONTRACTOR SHALL USE EXTREME CARE AND CAUTION DURING ALL

ABATEMENT PROCEDURES. CONTRACTOR SHALL CONDUCT REMOVAL OF

ALL MATERIALS FROM THE SITE WITH A MINIMUM DISTURBANCE AND

PROVIDE REGULAR MAINTENANCE AND PROTECTION OF THE BUILDING

PREMISES, STAGING AREA, TRANSPORTATION ROUTES, ETC,

THROUGHOUT THE BUILDING. REFER TO THE ICRA PLANS (SHEETS GI201-

GI203) FOR GUIDANCE ON PLANNED DEBRIS TRANSPORT PATHS.

COORDINATE PHASING OF WORK AND HAZARDOUS MATERIAL

CONTAINMENT PLANS WITH THE COR. COORDINATE USAGE OF STAIRS VS

USAGE OF CHUTE FOR DISPOSAL OF REMOVED HAZARDOUS MATERIAL

ON THE FIRST FLOOR.THE ABATEMENT CONTRACTOR SHALL PREPARE

THE WORK AREA FOR REMOVAL IN ACCORDANCE WITH APPLICABLE

REGULATIONS. WHERE OVERLAPS OCCUR, THE MOST STRINGENT

REQUIREMENTS APPLY.

THE DISTURBANCE OF ANY ACM, OR SUSPECT ACM, SHALL BE

PERFORMED BY A NYS LICENSED ASBESTOS ABATEMENT CONTRACTOR.

THE DISTURBANCE OF ANY LEAD-BASED PAINT, OR SUSPECT LBP, SHALL

BE PERFORMED BY A NYS LICENSED LEAD ABATEMENT CONTRACTOR.

LEAD CONTAINING PAINT AND CONTAMINATED MATERIALS SHALL BE

REMOVED AND DISPOSED OF IN COMPLIANCE WITH EPA AND OSHA

REGULATIONS.

CONTRACTOR TO MAINTAIN MEANS OF EGRESS PATHWAYS AT ALL TIMES.

COORDINATE ALTERNATE PROVISIONS AND OBTAIN APPROVAL FROM

OWNER AND AHJ IF EXISTING MEANS OF EGRESS MUST BE

COMPROMISED.OF MATERIAL EQUIPMENT, WASTE TRAILERS/DUMPSTERS,

AS WELL AS CONTRACTOR PARKING SHALL BE COORDINATED WITH THE

REST OF THE CONTRACT DOCUMENTS, THE GENERAL CONTRACTOR, AND

THE COR.

CONTRACTOR SHALL DEVELOP AND IMPLEMENT WRITTEN STANDARD

OPERATING PROCEDURES FOR ABATEMENT WORK TO ENSURE MAXIMUM

PROTECTION AND SAFEGUARDS FOR LEAD AND/OR ASBESTOS EXPOSURE

TO WORKERS, PATIENTS, EMPLOYEES, GENERAL PUBLIC, AND THE

ENVIRONMENT.

LOCATIONS OF SITE STORAGE SHALL BE COORDINATED WITH VA COR.

CONTRACTOR SHALL PROVIDE ALL TOOLS, SCAFFOLDING, LADDERS,

BARRIERS, AND ASSOCIATED MATERIALS AND EQUIPMENT REQUIRED TO

COMPLETE ALL WORK INDICATED IN THE CONTRACT DOCUMENTS. THE

OWNER OR THIER REPRESENTATIVE SHALL NOT BE RESPONSIBLE FOR

LOST, DAMAGED OR STOLEN ITEMS.

CONTRACTOR SHALL PROVIDE ALL SIGNS, LABELS, WARNINGS, AND

POSTED INSTRUCTIONS THAT ARE NECESSARY TO PROTECT, INFORM,

AND WARN OF THE HAZARD FROM ASBESTOS EXPOSURE.

CONTRACTOR SHALL POST IN A PROMINENT AND CONVENIENT PLACE

FOR LABORERS, A COPY OF THE LATEST APPLICABLE REGULATIONS

FROM OSHA, EPA, NIOSH, NYSDPH, AND THE NYSDEC.

CONTRACTOR SHALL COMPLETELY PROTECT ALL CONTROLS, CONDUIT,

TUBING, ELECTRICAL PANELS, EQUIPMENT, ETC, SCHEDULED TO REMAIN

WITHIN THE WORK AREAS.

ALL BUILDING FINISHES, CONSTRUCTION EQUIPMENT, OR OTHER

COMPONENTS OF THE BUILDING WHICH ARE SCHEDULED TO REMAIN,

THAT ARE DAMAGED OR ARE IN ANY WAY DISRUPTED AS A RESULT OF

THE EXECUTION OF THIS CONTRACT ARE TO BE REPLACED OR RESTORED

TO ORIGINAL CONDITIONS BY THE CONTRACTOR, WITHOUT ADDITIONAL

COST TO THE OWNER.

THE VA AND THE HAZARDOUS MATERIAL ABATEMENT CONTRACTOR

SHALL MUTUALLY AGREE ON THE NUMBER AND LOCATION OF ANY

REMOTE DECONTAMINATION UNITS DURING THE PRE-CONSTRUCTION

MEETING. TWO RECOMMENDED LOCATIONS HAVE BEEN PROVIDED ON

THE DRAWINGS.

SUBMIT DRAWINGS INDICATING THE LOCATION AND NUMBER OF HEPA

FILTER EQUIPPED NEGATIVE PRESSURE MACHINES, AIRLOCKS, AND

DECONTAMINATION CHAMBERS. SUBMIT CALCULATIONS SHOWING THE

NUMBER OF AIR CHANGES FOR EACH CONTAINMENTS AREA.

PHASE WORK AS REQUIRED BY THE GENERAL CONTRACTOR AND VA.

CONTRACTOR TO COORDINATE DEMOLITION ACTIVITIES WITH COR TO

MAINTAIN FULL FUNCTIONALITY OF ADJACENT OCCUPIED SPACES. THE

GROUND FLOOR IS INTENDED TO REMAIN OPERATIONAL DURING THIS

PROJECT. UTILIZE GLOVEBAG METHODS ON THE GROUND FLOOR TO

MINIMIZE IMPACT ON BUILDING OPERATIONS.

CONTRACTOR TO PROVIDE FIRE, SMOKE, DIRT, DUST AND NOISE

CONTAINMENT BARRIERS BETWEEN WORK AREA AND ADJACENT

OCCUPIED SPACES. COORDINATE WITH VA ICRA, ASBESTOS, AND LEAD

ABATEMENT REQUIREMENTS, AND THE COR.

CONTRACTOR TO COORDINATE ALL UTILITY SYSTEM SHUTDOWN

ACTIVITIES IN ADVANCE WITH THE COR. ALL OCCUPIED SPACES

ADJACENT TO THE AREA OF WORK ARE TO REMAIN OPERATIONAL.

WORK OUTSIDE OF NORMAL HOURS MUST BE APPROVED BY THE COR.

THE ASBESTOS ABATEMENT CONTRACTOR AND THE MECHANICAL AND

PLUMBING CONTRACTORS SHALL BE RESPONSIBLE FOR DISMANTLING

ANY HVAC EQUIPMENT AS NECESSARY TO GAIN ACCESS TO ACM ON

HVAC EQUIPMENT FOR PROPER REMOVAL AND DISPOSAL.

CONTRACTOR TO REMOVE ALL DEMOLITION AND CONSTRUCTION DEBRIS

ON A DAILY BASIS. COORDINATE MEANS, METHODS AND ROUTES WITH VA

ASBESTOS AND ICRA REQUIREMENTS, AND THE COR. ALL REMOVED

HAZARDOUS MATERIALS AND HAZARDOUS MATERIAL CONTAMINATED

WASTE SHALL BE PROPERLY PACKAGED PRIOR TO REMOVAL FROM THE

WORK AREAS. WARNING LABELS SHALL BE APPLIED TO ASBESTOS WASTE

AS APPROPRIATE. ALL ACM OR LCP REMOVED SHALL BE ACCOMPANIED

BY A WASTE SHIPMENT RECORDS. COMPLETED WASTE SHIPMENT

RECORDS SHALL BE PROVIDED TO THE OWNER AS A PART OF THE

CLOSEOUT DOCUMENTATION, ORIGINAL RECORDS SHALL BE PROVIDED

TO THE OWNER WITHIN 35 DAYS OF WASTE LEAVING THE SITE.

CONTRACTOR TO ASSUME THAT ALL UNTESTED ORIGINAL BUILDING

MATERIALS TO CONTAIN ASBESTOS OR LEAD, UNLESS SAID MATERIAL IS

TESTED AND CONFIRMED AS CONTAINING LESS THAN THE REGULATED

PERCENTAGE OF ASBESTOS AND/OR LEAD. EXISTING ACM HAS BEEN

CONFIRMED IN PIPE INSULATION AND FITTINGS, SPECIFIC ORIGINAL

FLOORING MATERIALS, AND IN TRANSITE PANELS AT RADIATORS BELOW

WINDOWS. NO ASBESTOS CONTENT HAS BEEN IDENTIFIED IN SAMPLING

OF CEILING TILES, DRYWALL, JOINT COMPOUND, SKIM COAT, FIBERBOARD,

FIRESTOP, COVE BASE, MASONRY WINDOW CAULK, BATHROOM CAULK,

TILE GROUT, TILE GLUE, CERAMIC TILES, OR SPECIFIC FLOORING

MATERIALS. LEAD CONTAINING PAINT HAS BEEN IDENTIFIED IN AT LEAST

ONE AREA IN THE FACILITY. SHOULD ANY PREVIOUSLY UNIDENTIFIED OR

OTHERWISE UNANTICIPATED SUSPECT MATERIAL BE IDENTIFIED DURING

CONSTRUCTION, STOP WORK AND NOTIFY OWNER FOR FURTHER

DIRECTION. UNDER NO CIRCUMSTANCES SHALL THE CONTRACTOR

COLLECT OR ANALYZE BULK SAMPLES OF SUSPECT MATERIALS WITHOUT

THE APPROVAL OF THE OWNER.

ALL MATERIAL MEASUREMENTS, QUANTITIES, AND LOCATIONS ARE

APPROXIMATE AND FOR GENERAL ORIENTATION ONLY. AS HIDDEN

CONDITIONS ARE UNCOVERED, ADDITIONAL HAZARDOUS MATERIAL MAY

BE UNCOVERED THAT REQUIRE ABATEMENT. REFER TO SPECIFICATIONS

FOR ADDITIONAL INFORMATION.

COORDINATE WITH INDUSTRIAL HYGENIST FOR REVIEW OF MONITORING,

AND FINAL CONFIRMATION OF ABATED AREAS, REFER TO SPEC SECTION

02 82 13.13

ABCDEFIJMNP

GO HKL

DISH

WASHING

ROOM NO.

114114

ELEVATOR

NO. 1

E1E1

D.W.R.

STAIR

HALL

121Z121Z

CLOSET

120D120D

REST.

120B120B

STOR. CL.

120A120A

OFFICE

120C120C

OFFICE

120A

226 SF

OFFICE

120B120B

STORAGE

117A117A

STORAGE

104104

REST.

101B101B

CLOSET

102B102B

CLOSET

102C102C

STORAGE

101A101A

STAIR

HALL NO.

122Z122Z

ELEVATOR

NO. 2

E2E2

POT

ROOM

116116

NOURISHMENT

115115

TOILET

110A110A

TELECOM

ROOM

110110

COOLER

111111

CLOSET

109109

STAIR

HALL 3

108108

FOOD

STORAGE

105105

COOLER

113113

CLOSET

120C120C

DISH

STORAGE

112112

SERVICE

UNIT

102A102A

LOBBY

NO. 2

101101

KITCHEN

107107

CONFERENCE

119A119A

FOOD &

NUTRITION

SERVICE

119119

PATIENT

DINING

ROOM NO.

102102

DISH

WASHING

ROOM NO.

106106

PATIENT

DINING

ROOM NO.

103103

LOBBY

NO. 1

120120

MRE

STORAGE

118118

SERVICE

UNIT

117117

PASSAGE

107Z-W107Z-W

PASSAGE

107Z-E107Z-E

SPECKLED CREAM VFT WITH

BLACK AND YELLOW MASTIC

UNDER NON-ACM VFT

TP

SAMPLE

HA 31

NOTE: REFER TO INFECTION CONTROL &

INTERIM LIFE SAFETY SHEETS FOR

PROPOSED CRITICAL BARRIER

LOCATIONS - COORDINATE FINAL

LOCATIONS WITH COR

05A-401 F1

QTYS - ACM MATERIALSLEGEND

180 SF ± TOTAL FLOOR FINISH

MATERIAL TO BE

ABATED THIS FLOOR

REMOVAL PATH

SAMPLE

HA ##

SAMPLE

LOCATION

ASBESTOS /

LEAD PAINT

NOT ALL SAMPLE LOCATIONS SHOWN

FOR CLARITY. ONLY POSITIVE OR

POSITIVE STOP SAMPLES ARE

LOCATED. SAMPLE NUMBER PER

SURVEY REPORT FROM TERRACON.

REFER TO SURVEY REPORT FOR

SPECIFIC SAMPLE INFORMATION

PATH INDICATED IS PROVIDED FOR

INTENT ONLY. COORDINATE FINAL

REMOVAL PATHWAYS, PHASING, AND

METHODS WITH GENERAL

CONTRACTOR AND COR.

SAMPLE

PNT ##

TRANSITE PANELS

TP

100 SF ± TRANSITE PANELS, MASTIC AND

CAULKING (AT WINDOWS) TO BE

ABATED THIS FLOOR.

60 LF ± PIPE FITTINGS, INSULATION AND

MASTIC TO BE COMPLETELY

ABATED AND REMOVED.

TN

PN

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD A/E:

STAMPCONSULTANT

321 4 5 6 7 8 9 10

TRIPLE C - The A/E Group 201 E. Jefferson Street, Suite 200 Syracuse, NY 13202

MAT PERKINS

(315) 484-5958

Au to de sk

D oc s:

//6

-2

2-

M on tro se V

AM

C

E H

R M

IU

/6

-2

2-

0.

M on tro se .E

H R

M .A

R C

H .B

.rv t

-0 3-

7:

:2

05H-101

HAZARDOUS MATERIAL ABATEMENT PLAN -

FIRST LEVEL

620-22-700

06/27/2025 M. Perkins C. Raynes

ISSUED FOR

CONSTRUCTION

(EHRM) INFRASTRUCTURE

UPGRADES

2094 Albany Post Road, Montrose, NY 10548

1/8" = 1'-0"F1 HAZARDOUS MATERIAL ABATEMENT PLAN - FIRST LEVEL

1 ABATE TRANSITE PANELS ON RADIATOR BELOW WINDOW.

2 ABATE SPECKLED CREAM VINYL TILE AND ASSOCIATED MASTIC IN AREAS AS

INDICATED. SEE LEGEND BELOW. TREAT ANY REMOVED NON-ACM TILE

COVERING (IN DIRECT CONTACT) WITH ACM FLOORING TO BE CONTAMINATED

FOR THE PURPOSES OF DEMOLITION AND REMOVAL REQUIREMENTS.

3 PRIOR TO DEMO PROVIDE CONTAINMENT BARRIER AND PERSONNEL

DECONTAMINATION FACILITY PER 02 82 11 DURING ABATEMENT WORK.

COORDINATE TIMING WITH COR (48 HR MAX) TO MINIMIZE DISRUPTION TO

OCCUPIED SPACES.

# KEYNOTES

1.

2.

3.

4.

A.

ABATEMENT / ICRA NOTES:

ABATEMENT SCOPE INCLUDES DEMO WORK AS REQUIRED TO ACCESS ACM.

CONTRACTOR TO FIELD VERIFY QUANTITIES.

CONTRACTOR TO AVOID DISRUPTION OF PIPE INSULATION LOCATIONS. PROVIDE COORDINATION

DRAWINGS TO LOCATE ANY ACM CONTAINING ITEMS IN CHASES OR PLENUMS THAT CANNOT BE

AVOIDED.

REFER TO ACM REPORTS IN SPECIFICATIONS.

ICRA EVALUATIONS AND REQUIREMENTS TO BE COORDINATED THRU THE COR. REFER TO

INFECTION CONTROL & INTERIM LIFE SAFETY SHEETS.

SUMMARY OF ABATEMENT & INFECTION CONTROL REQUIREMENTS

SHEET SYMBOL LEGEND

KEYNOTES

GENERAL NOTES

EXISTING CONSTRUCTION TO REMAIN

EXISTING CONSTRUCTION TO BE DEMOLISHED

NEW CONSTRUCTION, WITH PARTITION TYPE

A1

A.

B.

C.

D.

E.

F.

G.

H.

I.

SEE GENERAL NOTES AND PLANS FOR TYPICAL GENERAL PROJECT

REQUIREMENTS AND PROJECT LOCATION DRAWINGS.

SEE INTERIOR FINISH DRAWINGS FOR ADDITIONAL FINISHES

INFORMATION.

SEE MECHANICAL AND ELECTRICAL DRAWINGS FOR ADDITIONAL

SYSTEMS INFORMATION.

NEW TELECOM ROOMS SHALL COMPLY WITH THE LATEST VA

PHYSICAL SECURITY STANDARDS, AND CAMPUS STANDARDS.

SEE TYPICAL WALL FRAMING DETAILS ON SHEET A-511.

SEE TYPICAL HEAD OF WALL DETAIL ON SHEET A-512.

SEE TYPICAL CEILING DETAILS ON SHEET A-531

PROVIDE TEMPORARY AIR TIGHT BARRIER AROUND WORK AREA

DURING ANY ACTIVITIES WHICH PRODUCE DUST, TYPICAL.

MAINTAIN CLEAR EXIT PATHS AND STAIRS AT ALL TIMES.

PARTITION RATING GRAPHICS:

4 HR FIRE BARRIER

3 HR FIRE BARRIER

2 HR FIRE & SMOKE BARRIER

2 HR FIRE BARRIER

2 HR FIRE BARRIER/SHAFT

1 HR FIRE & SMOKE BARRIER

1 HR FIRE BARRIER

1 HR FIRE BARRIER/SHAFT

SMOKE PARTITION (NON RATED)

NON RATED

PARTITION RATING GRAPHIC DESIGNATION: PRIORITY

1 HIGHEST

5 LOWEST

PARTITIONS REQUIRED TO BE SMOKE RESISTANT, FIRE

RESISTANT, OR BOTH FIRE AND SMOKE RESISTANT ARE SHOWN

GRAPHICALLY ON PLANS WITH HATCH PATTERNS.

NO SCOPE

2"

1/2" 1/2"VARIES

SEE PLAN

WALL - SEE PLAN

FOR TYPE

SEALANT - EA. SIDE

& ALL AROUND,

TYP.

HOLLOW METAL

FRAME

1/ 2"

VA

R

IE

S

SE

E

PL

AN

1/ 2"

UNO

4" 2"

ADJACENT WALL

WHERE OCCURS

SEALANT - EA SIDE &

ALL AROUND, TYP.

HOLLOW METAL FRAME

WALL - SEE PLAN

FOR TYPE

D1

TYPICAL FRAME

H

EI

G H

T

2" WIDTH 2"

D3

FRAME TYPE ELEVATIONS DOOR TYPE ELEVATIONS

F

FLUSH

05A-400 D7

ELEVATOR

NO. 2

E2E2

STAIR

HALL 3

108108

STAIR

HALL

121Z121Z

STAIR

HALL NO.

122Z122Z

05A-401 F1

05A-400 F3

SERVICE

UNIT

117117

TELECOM

ROOM

179 SF

B

B

B

B

A4

B

TOILET

110A110A

B

(E

XT

G

VI

F)

'-1 0"

(EXTG VIF)

12'-7 1/4"

(EXTG VIF)

4'-3"

(EXTIG VIF)

4'-2 3/4"

B1 05A-51112

ACOUSTICAL OR RATED

FLEXIBLE SEALANT

FLOOR LINE

ADD ONE LAYER OF 5/8" GWB,

ONE-SIDE WITH APPROVED UL

SETTING COMPOUND BETWEEN

LAYERS AND FASTENED TO

WALL AS REQUIRED, AT

EXISTING GWB WALL

ASSEMBLIES

EXISTING STRUCTURAL DECK

EXISTING METAL STUDS AND

BATT INSULATION TO REMAIN

A/C GRADE, 3/4" FIRE-TREATED

PLYWOOD TO 9'-0" ABOVE FINISHED

FLOOR, ADHERED TO CONCRETE AT

EXISTING CONCRETE WALL

ASSEMBLIES

BOTTOM OF PLYWOOD

TO BE AT 12" AFF

UL DESIGN V497

1-HOUR PARTITION RATED FROM BOTH SIDES

EXISTING GWB OR

CONCRETE WALL

ASSEMBLY, WHERE OCCURS

SIDE OF

EXISTING

ROOM OR

CORRIDOR TO

REMAIN

05A-512 D5

05A-512 B5

ACOUSTICAL OR RATED

SEALANT BOTH SIDES

FLOOR LINE

5/8" GWB BOTH SIDES

SOUND ATTENUATION

BATTS (SAB) PER

SCHEDULE.

CEILING LINE

EXISTING STRUCTURAL DECK

METAL STUDS, SIZE

PER SCHEDULE

05A-512 D5

A/C GRADE, 3/4" FIRE-

TREATED PLYWOOD TO 9'-0"

ABOVE FINISHED FLOOR

05A-512 B5

AT FIRE RATED

PARTITIONS

AT SMOKE RATED

PARTITIONS

BOTTOM OF PLYWOOD TO

BE AT 12" AFF

OFFICE

110110

OFFICE

110110

TOILET

110A110A

TELECOM

ROOM

179 SF

TOILET

110A110A

TOILET

110A110A

PATH OF REMOVAL

FROM ELEVATOR

TO EXTERIOR

PROVIDE DUMPSTER 35' FROM ANY

BUILDING, 6'-0" HIGH TEMPORARY

CONSTRUCTION FENCE AND GATE. TO BE

LOCKED AT ALL TIMES, PROVIDE COR

WITH KEY. COORDINATE FINAL LOCATION

WITH COR

PROVIDE CART FOR DAILY WASTE REMOVAL

COORDINATE FINAL LOCATION WITH COR

LOADING DOCKS WILL BE IN USE

DURING CONSTRUCTION.

COORDINATE ANY CONSTRUCTION

VEHICULAR ACTIVITY TO ENSURE

ACCESS TO LOADING AREAS ARE

NOT IMPEDED.

J2

J2

J2

2'- 9"

VI

F

1'- 6"

VIF

2'-3"

PASSAGE

107Z-W107Z-W

SERVICE

UNIT

117117

TYP.

LINE OF

STRUCTURE

LINE OF

STRUCTURE

09 29 00

SOUND ATTENUATION BATTS

(SAB), WHERE OCCURS

NOTE:

IF PARTITION TYPE IS USED IN A

CHASE WALL CONDITION, PROVIDE

CROSS BRACING GUSSETS AT 48"

O.C. MAX VERTICALLY. FABRICATED

FROM 6" MTL STUDS.

6”

09 29 00

5/8" GWB

09 29 00

SAB RETAINER STRAP

WHERE SAB OCCURS

CEILING

07 92 00

SEALANT

09 22 16

METAL STUDS

A-721 B7

TN

PN

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT/ENGINEER OF RECORD A/E:

STAMPCONSULTANT

321 4 5 6 7 8 9 10

TRIPLE C - The A/E Group 201 E. Jefferson Street, Suite 200 Syracuse, NY 13202

MAT PERKINS

(315) 484-5958

Au to de sk

D oc s:

//6

-2

2-

M on tro se V

AM

C

E H

R M

IU

/6

-2

2-

0.

M on tro se .E

H R

M .A

R C

H .B

.rv t

-0 3-

7:

:3

05A-400

ARCHITECTURAL ENLARGED VIEWS - FIRST

LEVEL

620-22-700

06/27/2025 M. Perkins K. McDermott

ISSUED FOR

CONSTRUCTION

(EHRM) INFRASTRUCTURE

UPGRADES

2094 Albany Post Road, Montrose, NY 10548

3" = 1'-0"D1 HOLLOW METAL HEAD DETAIL

3" = 1'-0"D3 HOLLOW METAL JAMB DETAIL

1/4" = 1'-0"F1 DOOR AND FRAME TYPES ELEVATIONS

1 REMOVE EXISTING DOOR AND FRAME.

2 REMOVE EXISTING FLOORING AND WALL BASE.

3 EXISTING CEILING TO REMAIN.

4 PROVIDE NEW FIRE EXTINGUISHER CABINET WITH A TYPE 2A:10B:C

FIRE EXTINGUISHER LOCATED NO GREATER THAN 75 FEET AWAY

FROM THE NEW TR. CONTRACTOR TO COORDINATE THE NEW

LOCATION WITH THE COR. CONTRACTOR SHALL BID A NEW FEC FOR

EACH TR IN THE SCOPE OF WORK. SEE SPECIFICATION 10 44 13.

5 NEW INFILL AT EXTERIOR. NEW WALL TO MATCH EXISTING.

6 AT NEW WALL INSTALLATIONS, CONTRACTOR TO PAINT NEW WALL IN

ITS ENTIRETY. INSTALL NEW WALL BASE AT ENTIRE WALL SPAN

OR APPROPRIATE TRANSITION LOCATION AS APPROVED BY THE COR.

FINAL COLOR APPROVAL BY COR OR CAMPUS INTERIOR

DESIGNER.

7 TELECOM ROOM TO BE OPEN TO DECK ABOVE.

8 REMOVE EXISTING ACOUSTICAL CEILING AND LIGHTS. MODIFY

AND/OR PROVIDE ADDITIONAL SUPPORTS AS REQUIRED FOR

EXISTING CEILING ITEMS TO REMAIN.

9 REMOVE OBSERVATION WINDOW AND INFILL WALL, FINISH TO MATCH

ON BOTH SIDES

10 NEW DOOR. SEE DOOR SCHEDULE AND SPECIFICATIONS FOR

ADDITIONAL INFORMATION. COORDINATE DOOR AND FRAME WITH

ACCESS CONTROL HARDWARE.

11 REMOVE EXISTING WINDOW, AC UNIT AND METAL SUPPORT FRAME.

PROVIDE TEMPORARY INFILL.

12 ANY NEW GROUND LEVEL CHILLER PIPES ATTACHED TO EXTERIOR

WALLS SHALL BE PAINTED IN THEIR ENTIRETY TO MATCH BRICK

COLOR. REQUIREMENT OF NEW YORK STATE PARKS, RECREATION

AND HISTORIC PRESERVATION (SHPO) DOCUMENT 24PR00345

JFXVGRV7XYPA DATED DECEMBER 9,2024.

13 ACCESS DOOR PER SPECIFICATION, COR TO CONFIRM LOCATION

AND MOUNTING HEIGHT.

1/32" = 1'-0"F7 FIRST LEVEL REFERENCE PLAN

1/4" = 1'-0"D7

ARCHITECTURAL ENLARGED FLOOR PLAN -

FIRST LEVEL - ROOM 110 - NEW

NOTE: FIRE RESISTANCE TEST FOR ONE HOUR RATED WALLS: UL U465

(TYPE A) TYPICAL PARTITION

MARK STUD WIDTH PRTN WIDTH DESIGN STC

A4 4" 5 1/4" 35

NOTE: 2-HOUR PARTITION RATED WALLS: UL V438, U411

(TYPE B) TYPICAL PARTITION

MARK STUD WIDTH PRTN WIDTH DESIGN STC

B 2 1/2" 3/4" 45

DOOR AND FRAME SCHEDULE

IDENTIFICATION DIMENSIONS PANEL FRAME DETAIL

FIRE RATING

HARDWARE

NOTESLEVEL ROOM NO. ROOM NAME DOOR NO. W1 H T TYPE MATERIAL FINISH GLAZING UNDERCUT TYPE MATERIAL FINISH HEAD JAMB SILL GROUP ELECTRICAL LEVEL 1 110 TELECOM ROOM 110 3' - 6" 7' - 0" 1 3/4" F WD WD NONE 3/8" 1 HM P-2 D1/ 05A-400 D3/ 05A-400 - - HW-SH-3F SEE SPEC 1

1/4" = 1'-0"D6

ARCHITECTURAL ENLARGED FLOOR PLAN -

FIRST LEVEL - ROOM 110 - DEMO

1/4" = 1'-0"B7

ARCHITECTURAL REFLECTED CEILING PLAN -

FIRST LEVEL - ROOM 110 - NEW

1/4" = 1'-0"B6

ARCHITECTURAL REFLECTED CEILING PLAN -

FIRST LEVEL - ROOM 110 - DEMO

3/4" = 1'-0"F6 SITE DIAGRAM - BUILDING 5

1. SEE SPECIFICATION 08 71 00 FOR DOOR HARDWARE REQUIREMENTS. COORDINATE WITH ELECTRICAL.

DOOR HARDWARE LEGEND

HW-SH-3F Secured Access Door - Storeroom Locking (F07 Lockset) with Closer, Overhead Stop, Alarm Contact, Card Reader

1/2" = 1'-0"F3 FIRST LEVEL CHASE - SERVICE UNIT - ROOM 117

ACCESS DOOR SCHEDULE

LEVEL ROOM NAME ROOM NUMBER DESCRIPTION TYPE

LEVEL 1 SERVICE UNIT 117 Drywall Access Door Removable Door - Screwdriver Cam Latch 1'. 24"X24" SIZE

(TYPE J) NON-RATED PARTITION

MARK STUD WIDTH PRTN WIDTH DESIGN STC

J2 2 1/2" 3 1/8" -

25 GA MIN MTL

TRACK

CLIP ANGLE

1" X 20 GA MTL STRAP AT 3'-6"

O.C., EACH SIDE

25 GA MIN MTL TRACK AT

FLOOR

DOUBLE 20 GA MTL STUDS AT

BOTH JAMBS

TYPE A

CONT16 GA 6" WIDE

MTL BACK-UP

STRAP

MO

UN

TI

NG

H

EI

GH

TS

RE

F

TY

PI

CA

L

TYPE B

20 GA MTL RUNNER

TRACK - CLIP

FLANGES TO FIT

OVER STUDS

6" MIN, DEEPER

IF REQUIRED

MO

UN

TI

NG

H

EI

GH

TS

RE

F

TY

PI

CA

L

TYPE C

MO

UN

TI

NG

H

EI

GH

TS

RE

F

TY

PI

CA

L

8" MIN, DEEPER

IF REQUIRED

MIN 20 GA MTL STUDS

FACING OPPOSITE

DIRECTIONS TO ALLOW

MOUNTING PLATE

ATTACHMENT

14 GA STL RUNNER

TRACK-CLIP FLANGES

AND FOLD WEB TO FORM

ATTACHMENT FLANGE

PROVIDE DIAGONAL BRACING (AT 45° TYP) OF

TOP TRACK AT 48" OC MAX BETWEEN FULL

HEIGHT STUDS

DOOR

OPENING

DOOR

OPENING

DOUBLE DOOR OPENING

BELOW CEILING

OPENING

LARGE BELOW CEILING

OPENING

ABOVE CEILING OPENING

LARGE ABOVE CEILING

OPENING

MOUNTING DETAIL

TYPE B

DOUBLE STUDS

DOUBLE

STUDS

DOUBLE STUDS DOUBLE STUDS

DOUBLE STUDS

4' - 6" MAX 8' - 6" MAX 4' - 6" MAX 8' - 6" MAX

ALL STUDS ARE TO BE 20 GAUGE

IF GREATER THAN 8' - 6"

8' - 6" MAX 8' - 6" MAX

4' - 6" MAX

25 GA MIN BOTTOM TRACK (TYP)

FLOOR LINE

20 GA MTL TOP TRACK

(TYP UNO)

CEILING LINE

UNDERSIDE OF SLAB, FLOOR OR

ROOF DECK

2" WIDE 20 GA METAL

STRAP

OPENING ABOVE CEILING WHICH

INTERRUPTS LOWER OPENING JAMB

STUDS

STONE VENEER WALLS

16 GA MIN STUDS AT 20 GA MIN STUDS AT

WALL MOUNTED

ARCHITECTURAL

CABINETS/MILLWORK/

ATTACHED SHELVING

DOOR

OPENING

E8 05A-511

E8 05A-511

F8 05A-511

F8 05A-511

D8 05A-511

D8 05A-511

E8 05A-511

E8 05A-511

F8 05A-511

C8 05A-511

C8 05A-511

C8 05A-511

C8 05A-511

C8 05A-511

C8 05A-511

B8 05A-511

E8 05A-511

SEE: (D4/05A-511)

1.

2.

3.

4.

5.

6.

7.

NOTES:

ALL STUDS ARE SPACED 16"

OC MAXIMUM.

ALL STUDS SHALL BE "C"

STUDS WITH 1/4" RETURN

FLANGE MINIMUM.

INDICATES SHELVING

OR CABINETRY.

INDICATES STONE.

DOUBLE STUDS AT SIDES OF

OPENING SHALL NOT BE CUT

FOR DUCTWORK OR ANY

OTHER MECHANICAL

SYSTEMS.

REFER TO C3 / A-522 FOR

MOUNTING TYPE DETAILS.

PROVIDE PARTITION BRACING

AT ALL ASSEMBLIES OVER

15'-0" IN HEIGHT, U.N.O.

EXTERIOR

SHEATHING

SECOND LAYER OF GWB

WHERE INDICATED BY

PARTITION TYPE

RATED PARTITION AS

INDICATED ON PLAN, EXTEND

GWB TO INTERIOR FACE OF

EXTERIOR SHEATHING

INTERSECTION AT RATED

PARTITION AND EXTERIOR WALL

CONCRETE WALL

OR COLUMN

SEALANT

FURRING PARTITION

AS INDICATED ON PLAN

RATED PARTITION AS INDICATED

ON PLAN

INTERSECTION OF RATED

PARTITION AND CONCRETE

INTERSECTION AT RATED

PARTITION AND CONCRETE

LOWER PRIORITY

PARTITION

HIGHER PRIORITY

PARTITION

INTERSECTION OF CROSS

CORRIDOR DOOR IN RATED

PARTITION

MI

N3"

CONCRETE WALL OR

COLUMN

SEALANT

FURRING PARTITION

AS INDICATED ON PLAN

RATED PARTITION AS

INDICATED ON PLAN

MI

N3"

2 5/8"

SECOND LAYER OF GWB WHERE…