AMD 0008 21R1334.pdf

972483

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1. CONTRACT ID CODE PAGE OF PAGES

1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 18-Mar-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N6274221R1334

X 9B. DATED (SEE ITEM 11)

17-Dec-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

N62742-21-R-1334, Amendment 0008

See Next Page

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION

NO. 0008

5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

4. 22 Mar-2021

CODE

HAND DELIVER

NAVFAC PACIFIC

CONSTRUCTION CONTRACTS BR (ACQ33)

4256 RADFORD DR, BLDG 62

HONOLULU HI 96818-3296

N62742 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6274221R1334

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

This amendment is issued to revise the following:

This amendment is issued to revise the following:

1. Section 08 14 00, paragraph 2.1.3, 1st sentence is deleted in its entirety and replaced with the following:

Provide hardboard grade flush doors conforming to ANSI/WDMA I.S.1A, with 35mm thickness.

2. Section 14 21 23, revised as the following:

a. Part 1.1. References, U.S. DEPARTMENT OF DEFENSE (DOD) add the following before UFC 3-560-01:

UFC 3-490-06 (2018, with Change 1, 2021) Elevators

b. Paragraph 1.2.3.3, add the following before the first sentence:

Provide emergency power to both elevators.

c. Part 2.1, first paragraph is revised to add the following after the last sentence:

System shall also comply with UFC 3-490-06 which takes precedence over A17.1/CSA B44.

d. Paragraph 2.1.1.1. add the following sentence at the end of the paragraph:

Code Blue operation is not required.

e. Paragraph 2.3.7, is deleted in its entirety and replaced with the following:

2.3.7 NAVFAC VTE Key Protocol:

Provide all elevator keys to be industry standard barrel keys and keyed as followed:

a. Fan speed, cab and work lighting must be a toggle switch for each located behind a locked service panels located on the COP and the service panel door shall be designed with elevator certificate window that will accommodate a 101 mm x 152 mm operating certificate ITR with cert window in door.

b. EX511 Key should operate Buzzer reset / Loss of communication (located at the fire recall level)

c. EX512 Key should open the locked service panel door on the Car Operating Panel (COP) and the Stop / Parking (located inside the locked service panel door on the COP).

d. EX513 Key should operate Independent service (located on the COP available to the public (not behind the locked service panel door).

e. EX514 Key should operate Inspection / Access Enable (located inside the locked service panel and at the top and bottom terminal landings. Locate switch in the lobby wall, 1800mm above floor level and within 300 mm of elevator hoistway entrance frame.

f. Paragraph 2.6.1 is revised to add the following after the last sentence:

Provide signage engraved on Hall call stations per ASME A17.1-2019/CSA B44 Figure 2.27.9 Elevator Corridor Call Station Pictograph.

N6274221R1334

g. Subparagraph 2.6.2.1 f. is deleted in its entirety.

h. Paragraph 2.10.5 is deleted in its entirety and replaced with the following:

Provide continuous horizontal non slip rungs for the full height of the pit ladder.

i. Add Paragraph 2.10.6 Pit Entrapment Protection after Paragraph 2.10.5 as follows:

2.10.6. Provide 508 mm x 915 mm space in pit per UFC 3-490-06, and as indicated.

3. Revised Drawings: The following previously issued drawings are amended by sketches.

NO.

SKETCH

NO.

SHEET NO. NAVFAC NO. DESCRIPTION

1 SKA-001 A-601 17255418 Revised Doors Thickness

2 SKA-002 A-605 17255420 Revised Door type

3 SKA-003 A-401 17255391 Added Louver

4 SKA-004 A-402 17255392 Added Louver

5 SKA-005 A-403 17255393 Added Louver

6 SKA-006 A-611 17255421 Added Louver A1 at all units

4. All other terms and conditions remain unchanged.

End of Amendment

NAVAL FACILITIES ENGINEERING COMMAND - PACIFIC

J-023 BACHELOR OFFICER QUARTERS-A

PREPARED BY:

APPROVED BY:

DATE:

SCALE:

AMENDMENT NO.

SHEET NO.

SKETCH NO.

EPROJECT NO. 972483

DH

MH

AMD 0008

BOQ A - DOOR SCHEDULE & GATE SCHEDULE

SKA-00103/22/21

A-601

BOQ A - DOOR SCHEDULE - STANDARD AND UTILITY UNITS

DOOR

NUMBER ROOM NAME

TYPE

(NOTE

2)

DOOR FRAME

GLAZING

TYPE

(NOTE 6)

FIRE

RATING

(NOTE

7)

HARDW

(NOTE

SIZE MAT.

(NOTE

4)

FIN.

(NOTE

5)

MAT.

(NOTE

4)

FIN.

(NOTE

5)WIDTH HEIGHT

THICKNESS

(NOTE 3)

A1 BEDROOM A 914 2134 44 SC PT HM HMF 17.0

A2 BATHROOM A 914 2134 44 SC PT HM HMF 17.0

A3 CLOSET A 914 2134 44 SC PT HM HMF 18.0

A4 LAUNDRY C 762 2134 35 SC PT HM HMF 19.0

BOQ A - DOOR SCHEDULE - ACCESSIBLE UNITS

DOOR

NUMBER ROOM NAME

TYPE

(NOTE

2)

DOOR FRAME

GLAZING

TYPE

(NOTE 6)

FIRE

RATING

(NOTE

7)

HARDW

(NOTE

SIZE MAT.

(NOTE

4)

FIN.

(NOTE

5)

MAT.

(NOTE

4)

FIN.

(NOTE

5)

WIDT

H HEIGHT

THICKNESS

(NOTE 3)

A1 BEDROOM A 914 2134 44 SC PT HM HMF 17.0

A2 BATHROOM A 914 2134 44 SC PT HM HMF 17.0

A3 CLOSET A 914 2134 44 SC PT HM HMF 18.0

A5 LAUNDRY D 1829 2134 35 SC PT HM HMF 20.0

H

W

H

W

DOOR TYPES

D

TWO PANEL BI-FOLD

PAIR DOORC

TWO PANEL BI-FOLD

SINGLE DOOR F

STOREFRONT PAIR

DOOR WITH GLASS

H

W

M

IN

T Y

P

NAVAL FACILITIES ENGINEERING COMMAND - PACIFIC

J-023 BACHELOR OFFICER QUARTERS-A

PREPARED BY:

APPROVED BY:

DATE:

SCALE:

AMENDMENT NO.

SHEET NO.

SKETCH NO.

EPROJECT NO. 972483

DH

MH

AMD 0008

1 : 50

DOOR & GATES TYPES AND NOTES

SKA-00203/22/21

A-605

L/A1

788 1412 870 743

LAUNDRY/

ENTRY

REF

W/D

LINEN

D/A4

8A8A

A-531

L/A1

NAVAL FACILITIES ENGINEERING COMMAND - PACIFIC

J-023 BACHELOR OFFICER QUARTERS-A

PREPARED BY:

APPROVED BY:

DATE:

SCALE:

AMENDMENT NO.

SHEET NO.

SKETCH NO.

EPROJECT NO. 972483

DH

MH

AMD 0008

1 : 50

UNIT PLANS/RCP - STANDARD

SKA-00303/22/21

A-401

D TYPICAL UNIT FLOOR PLAN

LAUNDRY/ENTRY

1412 870 743

LAUNDRY/

ENTRY

D/A4

PANTRY

REF

LINEN

W/D

8A

8A

10A

L/A1

NAVAL FACILITIES ENGINEERING COMMAND - PACIFIC

J-023 BACHELOR OFFICER QUARTERS-A

PREPARED BY:

APPROVED BY:

DATE:

SCALE:

AMENDMENT NO.

SHEET NO.

SKETCH NO.

EPROJECT NO. 972483

DH

MH

AMD 0008

1 : 50

UNIT PLANS/RCP - STANDARD W UTILITY

SKA-00403/22/21

A-402

D

TYPICAL UNIT AT UTILITY

6252334431

D/A5

LAUNDRY/

ENTRY

RANGE

LINEN

W

D

8A

MW

L/A1

NAVAL FACILITIES ENGINEERING COMMAND - PACIFIC

J-023 BACHELOR OFFICER QUARTERS-A

PREPARED BY:

APPROVED BY:

DATE:

SCALE:

AMENDMENT NO.

SHEET NO.

SKETCH NO.

EPROJECT NO. 972483

DH

MH

AMD 0008

1 : 50

UNIT PLANS/RCP - ACCESSIBLE

SKA-00503/22/21

A-403

D

ACCESSIBLE UNIT FLOOR PLAN

NAVAL FACILITIES ENGINEERING COMMAND - PACIFIC

J-023 BACHELOR OFFICER QUARTERS-A

PREPARED BY:

APPROVED BY:

DATE:

SCALE:

AMENDMENT NO.

SHEET NO.

SKETCH NO.

EPROJECT NO. 972483

DH

MH

AMD 0008

WINDOW AND WINDOW WALL TYPES, BOQ A - LOUVER SCHEDULE

SKA-00603/22/21

A-611

BOQ A - LOUVER SCHEDULE - STANDARD, UTILITY, ACCESSIBLE UNITS

LOUVER

NO.

ROOM

NAME

LOUVER

TYPE HEIGHT WIDTH SILL HEIGHT

FRAME

MATERIAL

FRAME

FINISH

FIRE

RATING

A1 LAUNDRY AA 203 864 2438 AL AF -