J.007 Performance Bond - FAA Form Number FAA 4400-63.pdf

PDF 351 KB Posted

Attached to
CRITICAL POWER SYSTEMS INSTALLATION SERVICES Federal contract opportunity
Solicitation number
6973GH-24-R-00177
Issued by
Department of Transportation Federal Aviation Administration Franchise Acquisition Services

About this file

This document is a Performance Bond required for a federal contract opportunity. It outlines the terms and conditions for the performance bond, including the contractor's legal name and business address, the surety company's name and address, the penal sum of the bond, the contract date and number, and the obligations of the principal and surety.

The related federal contract opportunity is for the Federal Aviation Administration (FAA) to acquire project management, design services, and installation/construction work for power systems and power system ancillary equipment and structures supporting the FAA Facility Power Systems programs at National Airspace System (NAS) facilities located throughout the United States and its territories. The solicitation is for a firm-fixed-price, multiple award, Indefinite Delivery/Indefinite Quantity (ID/IQ) contract. Proposals are due by October 18, 2024, at 6:00 pm Central Standard Time. The contract will be awarded under the FAA's Acquisition Management System, not the Federal Acquisition Regulation.

View the file

Other files for this federal contract opportunity

Other files attached to CRITICAL POWER SYSTEMS INSTALLATION SERVICES, newest first.
File Type Posted
6973GH-24-R-00177 REVISED SIR.pdf PDF
6973GH-24-R-00177 Amendment P00001.pdf PDF
J.024 Price Proposal Critical Power Systems Cost Worksheet 10-11-24.xlsx.xlsx XLSX spreadsheet
CPS SIR 6973GH-24-R-00177 Questions and Answers 10.16.24.xlsx XLSX spreadsheet
J.001 Critical Power Systems Statement of Work (SOW) Rev 1. 10-16-2024.docx DOCX document
J.008 Payment Bond - FAA Form Number 4400-61.pdf PDF
J.014 FAA Order 1050.10D - Environmental Pollution Control and Abatement at FAA Facilities.pdf PDF
J.26 Past Performance Questionnaire 5-31-24.docx DOCX document
J.027A-1 Phase 2 Volume 2, Technical Approach - Factor 2 Category 2 CPS Design Proposal Form.pdf PDF
J.018 FAA Order JO 1050.17B - Environmental Compliance at Air Traffic Organization Facilities.pdf PDF
J.019 FAA Order JO 6950.2F Electrical Power Policy lmplementation at NationalAirspace System Facilities.pdf PDF
J.022 Contractor Release - DOT FORM 4220.4.pdf PDF
6973GH-24-R-00177 as of 9-17-2024.pdf PDF
J.004 Government Furnished Equipment (GFE).pdf PDF
J.009 Pre-Construction Installation EOSH Checklist - FAA Form 3900-18.pdf PDF
J.012 FAA-C-1391e INSTALLATION, TERMINATION, SPLICING, AND TRANSIENTSURGE PROTECTION OF UNDERGROUND ELECTRICAL DISTRIBUTION SYSTEM POWER CABLES.pdf PDF
J.016 FAA Order JO 3900.64A - Air Traffic Organization Electrical SafetyProgram.pdf PDF
J.024 Price Proposal Critical Power Systems Cost Worksheet.xlsx XLSX spreadsheet
J.025 Phase I, Volume II - Relevant Corporate Experience Form.docx DOCX document
J.027A-2 Technical Approach, Factor 3, Installation Proposal Form.pdf PDF
J.001 Critical Power Systems Statement of Work (SOW).docx DOCX document
J.002 Contract Data Requirements List (CDRL).pdf PDF
J.003 Data Item Description (DID).pdf PDF
J.005 Contractor Acceptance Inspection (CAI) FAA Form 6010-5.pdf PDF
J.006 Travel Authorization Form.xlsx XLSX spreadsheet
J.010 Pre-Construction Agenda and Checklist - DOT Form F4220.3.doc DOC document
J.011 FAA-C-1217H Construction Specification - ELECTRICAL WORK, PREMISES WIRING.pdf PDF
J.013 FAA-STD-002H Standard Engineering Drawing Preparation & Support.pdf PDF
J.015 FAA Order JO 3900.57A CHG 1 - EOSH Requirements in the Planning & Execution of Construction & Maintenance Activities at NAS Facilities.pdf PDF
J.017 FAA Order JO 6950.27B - Power System Studies.pdf PDF
J.020 Fuel Storage Tank Guidelines.pdf PDF
J.021 FST Program Specifications for Construction.pdf PDF
J.023 FAA Order 1370.121B - FAA Information Security and Privacy Policy.pdf PDF
J.028 Technical Approach Evaluation Worksheets rev2 06-04-24.docx DOCX document
J.029 FAA cleanup schedule - ACEPS support.pdf PDF
Show all 35

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CO

PERFORMANCE BOND

DATE BOND EXECUTED (Must be same or later than date of contract)

PRINCIPAL (Legal name and business address) T

S

YPE OF ORGANIZATION ("X" one)

INDIVIDUAL PARTNERSHIP

JOINT VENTURE RPORATION

TATE OF INCORPORATION

SURETY(IES) (Name(s) and business address(es))

M

C

PENAL SUM OF BOND

ILLION(S) THOUSAND(S) HUNDRED(S) CENTS

ONTRACT DATE CONTRACT NO.

OBLIGATION: We, the Principal and Surety(ies), are firmly bound to the United States of America (hereinafter called the Government) in the above penal sum.

For payment of the penal sum, we bind ourselves, our heirs, executors, administrators, and successors, jointly and severally. However, where the Sureties are corporations acting as co-sureties, we, the Sureties, bind ourselves in such sum "jointly and severally" as well as "severally" only for the purpose of allowing a joint action or actions against any or all of us. For all other purposes, each Surety binds itself, jointly and severally with the Principal, for the payment of the sum shown opposite the name of the Surety. If no limit of liability is indicated, the limit of liability is the full amount of the penal sum.

CONDITIONS: The principal has entered into the contract identified above.

THEREFORE: The above obligation is void if the Principal - (a)(1) Performs and fulfills all the undertakings, covenants, terms, conditions, and agreements of the contract during the original term of the contract and any extensions thereof that are granted by the Government, with or without notice to the Surety(ies), and during the life of any guaranty required under the contract, and (2) performs and fulfills all the undertakings, covenants, terms, conditions, and agreements of any and all duly authorized modifications of the contract that hereafter are made. Notice of those modifications to the Surety(ies) are waived.

(b) Pays to the Government the full amount of the taxes imposed by the Government, if the said contract is subject to the Miller Act, (40 U.S.C.

270a-270e), which are collected, deducted, or withheld from wages paid by the Principal in carrying out the construction contract with respect to which this bond is furnished.

WITNESS: The Principal and Surety(ies) executed this performance bond and affixed their seals on the above date.

OMB Control No. 2120-0595

PERFORMANCE BOND INSTRUCTIONS

1. This form is authorized for use in connection with Government contracts. Any deviation from this form will require the written approval of the Administrator of General Services.

2. Insert the full legal name and business address of the Principal in the space designated "Principal" on the face of the form. An authorized person shall sign the bond. Any person signing in a representative capacity (e.g., an attorney-in-fact) must furnish evidence of authority if that representative is not a member of the firm, partnership, or joint venture, or an officer of the corporation involved.

3. (a) Corporations executing the bond as sureties must appear on the Department of the Treasury's list of the approved sureties and must act within the limitation listed therein. Where more than one corporate surety is involved their names and addresses shall appear in the spaces (Surety A, Surety B, etc.) headed "CORPORATE SURETY(IES)." In the space designated "SURETY(IES)" on the face of the form insert only the letter identification of the Sureties. (b) Where individual sureties are involved, a completed Affidavit of Individual Surety (Standard Form 28), for each individual surety, shall accompany the bond. The Government may require the surety to furnish additional substantiating information concerning its financial capability.

4. Corporations executing the bond shall affix their corporate seals. Individuals shall execute the bond opposite the word "Corporate Seal", and shall affix an adhesive seal if executed in Maine, New Hampshire, or any other jurisdiction requiring adhesive seals.

5. Type the name and title of each person signing this bond in the space provided.

PRA Public Burden Statement: A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a currently valid OMB Control Number. The OMB Control Number for this information collection is 2120-0595. Public reporting for this collection of information is estimated to be approximately 25 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information.

Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to: Information Collection Clearance Officer, Federal Aviation Administration, 10101 Hillwood Parkway, Fort Worth, TX 76177-1524

Page 1 of 2FAA 4400-63 (01/23)

CORPORATE SURETY(IES) (

S Continued)

S U R E T Y

B

NAME &

ADDRESS

TATE OF INC. LIABILITY LIMIT $

Corporate Seal

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

(Typed)

S U R E T

C

STATE OF INC. LIABILITY LIMIT

NAME(S) &

TITLE(S)

(Typed)

S U R E T Y

D

NAME &

ADDRESS

STATE OF INC. LIABILITY LIMIT

1. 2. Corporate

NAME(S) &

TITLE(S)

(Typed)

S U R E T Y

E

NAME &

ADDRESS

STATE OF INC. LIABILITY LIMIT

NAME(S) &

TITLE(S)

(Typed)

S U R E T Y

F

NAME &

ADDRESS

STATE OF INC. LIABILITY LIMIT

NAME(S) &

TITLE(S)

(Typed)

S U R E T Y

G

NAME &

ADDRESS

STATE OF INC. LIABILITY LIMIT

NAME(S) &

TITLE(S)

(Typed)

BOND

PREMIUM

RATE PER THOUSAND TOTAL

PRINCIPAL

SIGNATURE(S)

1.

(Seal)

2.

(Seal)

3.

(Seal) Corporate Seal

NAME(S) &

TITLE(S)

(Typed)

1. 2. 3.

INDIVIDUAL SURETY(IES)

SIGNATURE(S)

1.

(Seal)

2.

(Seal)

NAME(S) &

TITLE(S)

(Typed)

CORPORATE SURETY(IES)

S U R E T

A

STATE OF INC. LIABILITY LIMIT

Corporate Seal

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

(Typed)

Page 2 of 2FAA 4400-63 (01/23)

OMB Control No. 2120-0595

INSTRUCTIONS

DATE BOND EXECUTED Must be same or later than date of contract:
PRINCIPAL Legal name and business address:
INDIVIDUAL: Off
JOINT VENTURE: Off
PARTNERSHIP: Off
CORPORATION: Off
STATE OF INCORPORATION:
SURETYIES Names and business addresses:
MILLIONS:
THOUSANDS:
HUNDREDS:
CENTS:
CONTRACT DATE:
CONTRACT NO:
NAME ADDRESS_2:
STATE OF INC_2:
LIABILITY LIMIT_2:
1NAMES TITLES Typed_2:
2NAMES TITLES Typed_2:
NAME ADDRESS_3:
STATE OF INC_3:
LIABILITY LIMIT_3:
1NAMES TITLES Typed_3:
2NAMES TITLES Typed_3:
NAME ADDRESS_4:
STATE OF INC_4:
LIABILITY LIMIT_4:
1NAMES TITLES Typed_4:
2NAMES TITLES Typed_4:
NAME ADDRESS_5:
STATE OF INC_5:
LIABILITY LIMIT_5:
1NAMES TITLES Typed_5:
2NAMES TITLES Typed_5:
NAME ADDRESS_6:
STATE OF INC_6:
LIABILITY LIMIT_6:
1NAMES TITLES Typed_6:
2NAMES TITLES Typed_6:
NAME ADDRESS_7:
STATE OF INC_7:
LIABILITY LIMIT_7:
1NAMES TITLES Typed_7:
2NAMES TITLES Typed_7:
RATE PER THOUSAND:
TOTAL:
1 SealNAMES TITLES Typed:
2 SealNAMES TITLES Typed:
NAME ADDRESS:
STATE OF INC:
LIABILITY LIMIT:
1NAMES TITLES Typed:
2NAMES TITLES Typed:
name and title 1:
name and title 2:
name and title 3:

File details come from the government source that posted it. Updated .