J-1602000 Electrical.pdf

Section J – 1602000 Electrical

Attachment Number Attachment Title J-1602000-01 Definitions and Acronyms J-1602000-02 References and Technical Documents J-1602000-03 Stand-by Electrical Power Generators Inventory J-1602000-04 Electrical Transmission and Distribution System Inventory

Attachment J-1602000-01 Definitions and Acronyms

Equipment, Collateral Encompasses built-in and large substantially affixed equipment/property that is normally acquired and installed as part of a facility project.

Equipment, Installed Encompasses building-type equipment, built-in equipment, and large, substantially affixed equipment/property, and is normally acquired and installed as part of a facility project. Installed equipment is normally required to make a facility useful and operable.

Removing such equipment would impair the usefulness, safety, or environment of the facility or the facility restoration work required after its removal, is substantial.

Equipment, Personal Property

Personal property equipment includes all equipment other than collateral equipment.

Such equipment, when acquired and used in a facility or a test apparatus, can be severed and removed after erection or installation without substantial loss of value or damage thereto or to the premises where installed.

Facilities Life Cycle A facilities life cycle is divided into four stages, requirements (planning and design), acquisition (construction and acceptance), stewardship (operations, maintenance and repair), and disposal.

Facilities Maintenance Management

The planning, prioritizing, organizing, controlling, reporting, evaluating, and adjusting of facilities maintenance operations to support the CNO/NAVFAC facilities policy and objectives and satisfy customers’ facility needs. Defined by the International Facility Management Association as “the practice of coordinating the physical workplace with the people and work of the organization.”

High Voltage Transmission

Transmission of electrical loads greater than 69 kilovolts (KV).

Integrated Maintenance Plan

IMP is a recurring state-of-the-art, reliability-centered inspection, testing, maintenance and repair program that determines best practices for managing the functions and consequences of failures of facilities equipment and system components. IMP encompasses accepted commercial practices, including reactive, preventive, predictive and proactive maintenance, into one optimal program. The IMP approach gives the Contractor full responsibility to maintain systems and equipment and perform repairs whenever necessary to ensure equipment and systems are operational and remain in a constant state of readiness.

Life-Cycle Costs A form of economic analysis that considers the total cost of owning, operating, and maintaining a building or system over its useful life.

Low Voltage Distribution

Distribution of electrical loads less than or equal to 600 volts (V).

Medium Voltage Distribution

Distribution of electrical loads ranging from greater than 600 V up to and including 69

KV.

NEC National Electrical Code NFPA National Fire Protection Association Repair Repair is the restoration of facilities or equipment to such a condition that it may be effectively utilized for its designated purposes by overhaul, reconstruction, or replacement of constituent parts or materials which have deteriorated by action of the elements or usage, and which have not been corrected through maintenance. This term also applies to replacement of the entire unit or system if beyond economical repair. The intent of repair is to have the equipment at normal working condition.

Replacement Replacement, as a distinct work element, is confined to a program of planned replacement of a facility or its components. It may be further limited to major components such as air conditioning compressors, furnaces or hot water heaters.

Replacement is performed when the equipment has reached the end of its useful life;

when it no longer can perform due to degradation of its internal components and repair is no longer cost effective. Included under the replacement would be the major rebuilding of any component, since rebuilding also restores performance.

Restoration Restoration of real property to such a condition that it can be used for its intended purpose. Includes repair or replacement work to restore facilities damaged by inadequate sustainment, excessive age, natural disaster, fire, accident or other causes.

Attachment J-1602000-01 Definitions and Acronyms

Sustainment Maintenance and repair activities necessary to keep a typical inventory of facilities in “normal working condition”. Sustainment includes regularly scheduled maintenance as well as cyclical major repairs or replacement of components that occur periodically over the expected service life of the facilities.

Acronym Title AC Alternating Current (electricity) ANSI American National Standards Institute ASME American Society of Mechanical Engineers IMP Integrated Maintenance Program SRM Sustainment, Restoration and Modernization UFC Unified Facilities Criteria

Attachment J-1602000-02 References and Technical Documents

Reference Title MO-209 Engineering Criteria UFC 3-501-01 Electrical Engineering UFC 3-550-01 Exterior Electrical Power Distribution UFC 3-560-01 Electrical Safety. O&M

Non-Government Publications.

American National Standards Institute, Inc. (ANSI)

Attachment J-1602000-03 Stand-by Electrical Power Generators Inventory

Technical Description

Qty Use Provided by Purpose Required Date

Annex / Spec

Item Ref

CUMMINS 2000

kW, 50Hz, DIESEL ENGINE

/GENERATOR

2 Back-up Government To power the mission support side of the installation

Contract start date

1602000/ 3.1

Attachment J-1602000-04 Electrical Transmission and Distribution System/Equipment Inventory

ELECTRICAL DISTRIBUTION PANELS

Facility Frequency Voltage BUS AIC MCB DS Enclosure

Type Hz VOLT AC AMP kA AMP AMP

Missile Storage Facility 50 400/230 250 15 100 IP56

Secure Warehouse 50 400/230 250 15 100 IP30

Secure Warehouse 50 400/230 125 15 50 IP30

Entry Control Facility 50 400/230 250 25 60 IP30

Entry Control Facility 50 400/230 125 15 125 IP30

Entry Control Facility 50 400/230 125 25 125 IP30

Security Control facility 50 400/230 400 15 400 IP30

Security Control facility 50 400/230 125 15 100 IP30

Security Control facility 50 400/230 250 15 250 IP30

Security Control facility 50 400/230 125 15 100 IP30

Security Control facility 50 400/230 125 15 100 IP30

Security Control facility 50 400/230 125 15 100 IP30

Fire Station 50 400/230 400 15 315 IP30

Fire Station 50 400/230 250 15 160 IP30

Water Supply Building 50 400/230 400 35 320 IP30

Water Supply Building 50 400/230 125 15 125 IP30

Water Supply Building 50 400/230 125 15 125 IP30

Water Supply Building 50 400/230 125 15 125 IP30

Access Control facility 50 400/230 250 25 250 IP30

Access Control facility 50 400/230 125 25 125 IP30

Access Control facility 50 400/230 125 25 63 IP54

Multipurpose facility 50 400/230 400 35 320 IP30

Multipurpose facility 50 400/230 250 25 250 IP30

Multipurpose facility 50 230 100 15 32 IP30

Multipurpose facility 50 400/230 125 25 125 IP30

Multipurpose facility 50 400/230 800 50 800 IP30

Multipurpose facility 50 400/230 250 25 160 IP30

Multipurpose facility 50 400/230 125 25 125 IP30

Multipurpose facility 50 400/230 250 25 250 IP30

Multipurpose facility 50 400/230 250 25 250 IP30

Multipurpose facility 50 400/230 400 35 320 IP30

Multipurpose facility 50 400/230 400 35 320 IP30

Multipurpose facility 50 400/230 250 25 250 IP30

Multipurpose facility 50 400/230 250 25 160 IP30

Multipurpose facility 50 400/230 125 25 125 IP30

GP Warehouse #2 / Post Office 50 400/230 250 25 125 IP30

GP Warehouse #2 / Post Office 50 400/230 250 25 125 IP30

GP Warehouse #2 / Post Office 50 400/230 125 25 125 IP30

GP Warehouse #2 / Post Office 50 400/230 630 25 450 IP30

PW building 50 400/230 250 25 160 IP30

PW building 50 400/230 250 25 160 IP30

PW building 50 400/230 125 25 125 IP30

ELECTRICAL DISTRIBUTION EQUIPMENT

Facility Equipment Description Service

Attachment J-1602000-04 Electrical Transmission and Distribution System/Equipment Inventory

Site Switch Gear 10 KV Breaker USG Substation

Site Switch Gear 10 KV Breaker USG Substation

Site Transformer USG Substation

Site Transformer USG Substation

Site Transformer USG Substation

Site Transformer USG Substation

Site Switch Gear Mission Support Power

Site Transformer Mission Support Power

Site Transformer Mission Support Power

Site 10 KV Switch Gear Mission Support Power

Site Load Bank Transformer Mission Support Power

GP Warehouse #2 / PW GP Warehouse 2/PW Transformer Mission Support Power

Multipurpose facility Medical Transformer Mission Support Power

Multipurpose facility Housing/Dining Transformer Mission Support Power

Access Control facility Access Control Facility Transformer Mission Support Power

Site Wastewater Lift Station Transformer Mission Support Power