FA852316R0001_0009,_rev13.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

JSU

2. AMENDMENT/MODIFICATION NO.

FA8523-16-R-0001-0009

3. EFFECTIVE DATE

4. REQUISITION/PURCHASE REQ. NO.

FD20601430523

5. PROJECT NO (If applicable)

6. ISSUED BY CODE

ELECTRONIC WARFARE/EW, AFLCMC/WNKD

235 BYRON ST STE 19A

BLDG 301 CML PHN 478 926 7212

ROBINS AFB GA 31098-1670

BUYER: Chutney W. Guyton/WNKE chutney.guyton@us.af.mil Phone: (478) 926- 7000 No Collect Calls

7. ADMINISTERED BY (If other than item 6) CODEFA8540

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA852316R0001

9B. DATED (SEE ITEM 11)

6-MAR-2017

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified. 27-MAR-2017 5:00 PM

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

ROUTINE

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this amendment is to restate the Government’s requirement in its entirety. In doing so, the following changes have been made to the solicitation document:

1) Incorporated Performance Work Statement (PWS) revision, dated 2 February 2017, as shown in Section J of the solicitation. This PWS revision shall supersede all other PWS versions.

2) The Contract Line Item Number (CLIN) structure has changed as follows:

FROM:

CLIN

# CLIN Name Contract Type Unit of Measurement

X001 Program Management FFP 12 months

X002 Government Furnished Property FFP 12 months

X003 Maintenance Concept FFP 12 months

X004 Help Desk Support FFP 1-5 each

X005 Scheduled Maintenance FFP 12 months

X006 Unscheduled Maintenance CPFF 12 months

X007 Travel CRNF 1 Lot

X008 Cybersecurity CRNF 1 Lot

X009 Over and Above CPFF 1 Lot

X010 DATA FFP NSP

X011 Block Cycle Upgrade/Tech Refresh Requirements FFP 1 Lot

X012 Training (1 week) FFP 1 Lot

X013 Engineering Support FFP 12 months

X014 Repair CPFF 1 Ea

X015 GFE Replenishment CRNF 1 Lot

X016 Software FFP 1 Lot

TO:

CLIN

# CLIN Name Contract Type Unit of Measurement

X001 Program Management FFP 12 months

X002 Maintenance Support FFP 12 months

X003 Over and Above CPFF 1 Lot TBN

X004 Training (1 week) FFP 1-5 each

X005 Block Cycle and Software Upgrades FFP 1 lot

X006 Cyber Security FFP 1 lot

X007 GFE/GFP Management FFP 1 lot

X008 Repair: Minor FFP 1-50 Each

X009 Repair: Major FFP 1-50 Each

X010 Travel CRNF 1 Lot

Amendment/Modification FA8523-16-R-0001-0009

X011 Contractor Furnished Material CRNF 1 Lot

X012 DATA FFP NSP

3) Section L, Instructions, Conditions, and Notices to Offerors, has been changed as follows:

a. Added Volume III – PRICING PROPOSAL, which will include a pricing proposal spreadsheet and instructions on how to complete the spreadsheet.

b. The Pricing Proposal Spreadsheet will calculate the Total Evaluated Price (TEP) for all offerors.

4) Incorporated the Pricing Proposal Spreadsheet, dated 14 February 2017, as shown in Section J of the solicitation.

5) Section M, Evaluation Factors for Award, has been changed as follows:

FROM: The Travel CLINs (0007, 1007, 2007, 3007, and 4007) will be excluded in the TEP.

TO: CLINs X003 – Over and Above, X010 – Travel, and X011 – Contractor Furnished Equipment will be excluded from the TEP.

6) Revised all clauses from the Basic solicitation as shown in Section I of this solicitation.

7) Revised Preamble Language in its entirety, as shown in Section B.

8) This amendment serves as the conformed copy for the Basic soliciation and all corresponding amendments and attachments.

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

B.1 NOTICE TO OFFERORS: Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

B.2 GENERAL: This Request for Proposals (RFP) is issued with the intent to establish a contract for the Pocket J System. The Contractor (independently and not as an agent of the Government) shall furnish all necessary personnel, labor, supplies, materials and travel (except as otherwise authorized by the Contracting Officer) as required to perform the Pocket J requirements described herein, and as required under each line item. Performance shall be in accordance with all provisions and specifications as stipulated herein.

B.3 CONTRACT TYPE: This is an Indefinite Delivery, Indefinite Quantity (IDIQ) type contract as contemplated at FAR 16.504. This contract utilizes a mix of Contract Line Item (CLIN) types, specifically Firm-Fixed-Price (FFP), Cost-Plus-Fixed-Fee (CPFF), Cost Reimbursable-No Fee (CRNF). Each CLIN indicates the type used for each particular requirement.

B.4 OPTION PERIODS: This contract will include four 12 month option periods that will be awarded with the basic contract, but not exercised at the time of award. In accordance with the clauses in Section I of this contract, FAR 52.217-9, Option to Extend the Term of the Contract, the Government may extend the term of this contract by written notice to the Contractor within a stated period of time within which the Contracting Officer may exercise the option. In accordance with FAR 52.217-8, Option to Extend Services, the Government may require continued performance of any services within the limits at the specified rates in the contract. The option provision may be exercised more than once, but shall not exceed six months. The Contracting Officer may exercise the option by written notice to the Contractor within a stated period of time. The inclusion of the options will not obligate the Government to exercise them. The option periods associated with each CLIN series are defined as follows:

000X – Contract Award thru 365 calendar days after contract award 100X – 366 calendar days after contract award thru 730 calendar days after contract award 200X – 731 calendar days after contract award thru 1,095 calendar days after contract award 300X – 1,096 calendar days after contract award thru 1,460 calendar days after contract award 400X – 1,461 calendar days after contract award thru 1,825 calendar days after contract award

Note: An option is considered to have been exercised at the time the Government deposits written notification to the Contractor via mail or other electronic means of notification.

B.5 PLACE OF PERFORMANCE: Performance of options issued hereunder shall be in accordance with t h e e x e r c i s e o f e a c h individual option.

B.6 MINIMUM/MAXIMUM VALUE: The contractor shall furnish to the Government, when and if ordered, the items of supplies or services specified in this Schedule up to and including the “Maximum" amount $XX,XXX,XXX for all orders issued hereunder. The Government shall order at least the “Minimum” amount $2,000,000 in conjunction with award of the basic contract. The quantities of supplies or services specified in this Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government’s requirements do not result in orders in the quantities described as ”estimated” or “maximum” in the schedule, that fact shall not constitute the basis for an e q u i t a b le price adjustment.

Program Management

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

12 MO

Program Management Program Management IAW PWS dated 2 Feb 2017, para. 4.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Maintenance Support

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

12 MO

Maintenance Support Maintenance Support IAW PWS dated 2 Feb 2017, para. 4.4.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Maintenance Support

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Over and Above

Item No.

Cost Plus Fixed Fee Quantity U/I Unit Price Fixed Fee Est Total Cost 1 LO To be Negotiated To be Negotiated

Over and Above Over and Above IAW PWS dated 2 Feb 2017, para. 4.6.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

Over and Above

IAW PWS 1 LO

Training (1 Week Course)

Item No.

Firm Fixed Price From Quantity

U/I To Quantity U/I Unit Price Amount

1 EA 5 EA

Training (1 Week Course) Training (1 Week Course) IAW PWS dated 2 Feb 2017, para. 9.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBC

Proposed Period of Performance

IAW PWS 1 EA

Pricing for CLIN X003 for the Base Year and Option Year II will be included as a part of the Total Evaluated Price (TEP). However, this CLIN will be negotiated in Option Years III, IV, and V.

Block Cycle & Software Upgrades

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Block Cycle & Software Upgrades Block Cycle & Software Upgrades IAW PWS dated 2 Feb 2017, all paras in section 8.0.

Block Cycle & Software Upgrades

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

IAW PWS 1 LO

Cybersecurity

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Cybersecurity Cybersecurity IAW PWS dated 2 Feb 2017, all paras in section 6.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Cybersecurity

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

GFE Management

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

GFE Management GFE Management IAW PWS dated 2 Feb 2017, para 4.3.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Repair (Minor)

Item No.

Firm Fixed Price From Quantity

U/I To Quantity U/I Amount

1 EA 50 EA

Repair (Minor)

Repair (Minor) Minor Repairs IAW PWS dated 2 Feb 2017, para. 4.5.1.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Proposed Period of Performance

IAW PWS 1 EA

Repair (Major)

Item No.

Firm Fixed Price From Quantity

U/I To Quantity U/I Unit Price Amount

1 EA 50 EA

R408 Repair (Major) Major Repairs IAW PWS dated 2 Feb 2017, para. 4.5.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Repair (Major)

Proposed Period of Performance

IAW PWS 1 EA

Travel

Item No.

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost

1 LO

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER

Travel IAW PWS dated 2 Feb 2017, para. 4.9. All Travel shall be IAW Joint Travel Regulations (JTR) and FAR 31.2.

Priority: R ROUTINE

Contractor Furnished Material (CFM)

Item No.

Cost Reimbursement - No Fee Quantity U/I Estimated Unit Price Total Estimated Cost

1 LO $200,000.0000 $200,000.00

Contractor Furnished Material (CFM) Consumable/Expendable GFE Items PWS dated 2 Feb 2017, para. 4.3.1.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

DATA

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

DATA

Data IAW PWS dated 2 Feb 2017, para 7.0. See attached DD1423s.

ELIN Title Data Acq Doc #

A001 Presentation Material DI-ADMN-81373

A002 Conference Minutes DI-ADMN-81249, 81250B

A003 Diminishing Source of Supply and Material Shortage (DMSMS) DI-MGMT-81948

A004 Configuration Management Plan DI-MGMT-81875

A005 Status Reports DI-MGMT-80368A

A006 Parts Approval Reuest DI-MISC-80071E

A007 Acceptance Test Plan DI-QCIC-80553A

A008 Technical Manual Contract Requirement (TMCR) TM-86-01P

A009 Product Drawings/Models and Associated Lists DI-SESS-81000E

A010 Provisioning DI-SESS-81758A, -81759A, -81874

A011 Accident/Incident Report DI-SAFT-81563

A012 Gov't Industry Data Exchange Program (GIDEP) Alert Response DI-QCIC-80126B

A013 Gov't Industry Data Exchange Program (GIDEP) Alert/Safe-Alert Report DI-QCIC-80125B

A014 Engineering Change Proposal DI-SESS-80639D

A015 Software Development Plan DI-IPSC-81427A

A016 Software Version Description DI-IPSC-81442A

A017 Software Design Description DI-IPSC-81435A

A018 Interface Control Document DI-CMAN-81248B

A019 Software Requirements Specification DI-IPSC-81433A

A020 Interface Requirements Specification DI-IPSC-81434A

A021 Specification Change Notice DI-CMAN-80643D

A022 System/Subsystem Design Description DI-IPSC-81432A

A023 Interface Design Descriptions DI-IPSC-81436A

A024 Item Unique Identification Marking Plan DI-MGMT-80803

A025 Phase-Out Transition Plan DI-MGMT-81945

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A

Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ IAW1423 1 LO TBC

Proposed Period of Performance

+ IAW1423 1 LO

Program Management

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

12 MO

Program Management Program Management IAW PWS dated 2 Feb 2017, para. 4.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of

IAW PWS 12 MO

Maintenance Support

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

12 MO

Maintenance Support Maintenance Support IAW PWS dated 2 Feb 2017, para. 4.4.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Over and Above

Item No.

Cost Plus Fixed Fee Quantity U/I Unit Price Fixed Fee Est Total Cost 1 LO To be Negotiated To be Negotiated

Over and Above Over and Above IAW PWS dated 2 Feb 2017, para. 4.6.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Over and Above

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Training (1 Week Course)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Unit Price Amount

1 EA 5 EA

Training (1 Week Course) Training (1 Week Course) IAW PWS dated 2 Feb 2017, para. 9.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBC

Proposed Period of Performance

IAW PWS 1 EA

Pricing for CLIN X003 for the Base Year and Option Year II will be included as a part of the Total Evaluated Price (TEP). However, this CLIN will be negotiated in Option Years III, IV, and V.

Block Cycle & Software Upgrades

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Block Cycle & Software Upgrades Block Cycle & Software Upgrades IAW PWS dated 2 Feb 2017, all paras in section 8.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Cybersecurity

Cybersecurity IAW PWS dated 2 Feb 2017, all paras in section 6.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

GFE Management

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

GFE Management GFE Management IAW PWS dated 2 Feb 2017, para 4.3.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

GFE Management

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Repair (Minor)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Amount

1 EA 50 EA

Repair (Minor) Minor Repairs IAW PWS dated 2 Feb 2017, para. 4.5.1.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Proposed Period of Performance

IAW PWS 1 EA

Repair (Major)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Unit Price Amount

Repair (Major)

1 EA 50 EA

R408 Repair (Major) Major Repairs IAW PWS dated 2 Feb 2017, para. 4.5.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Proposed Period of Performance

IAW PWS 1 EA

Travel

Item No.

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost

1 LO

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER

Travel IAW PWS dated 2 Feb 2017, para. 4.9. All Travel shall be IAW Joint Travel Regulations (JTR) and FAR 31.2.

Priority: R ROUTINE

Contractor Furnished Material (CFM)

Item No.

Cost Reimbursement - No Fee Quantity U/I Estimated Unit Price Total Estimated Cost

1 LO

Contractor Furnished Material (CFM) Consumable/Expendable GFE Items PWS dated 2 Feb 2017, para. 4.3.1.

Contractor Furnished Material (CFM)

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

DATA

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

DATA

Data IAW PWS dated 2 Feb 2017, para 7.0. See attached DD1423s.

ELIN Title Data Acq Doc #

A001 Presentation Material DI-ADMN-81373

A002 Conference Minutes DI-ADMN-81249, 81250B

A003 Diminishing Source of Supply and Material Shortage (DMSMS) DI-MGMT-81948

A004 Configuration Management Plan DI-MGMT-81875

A005 Status Reports DI-MGMT-80368A

A006 Parts Approval Reuest DI-MISC-80071E

A007 Acceptance Test Plan DI-QCIC-80553A

A008 Technical Manual Contract Requirement (TMCR) TM-86-01P

A009 Product Drawings/Models and Associated Lists DI-SESS-81000E

A010 Provisioning DI-SESS-81758A, -81759A, -81874

A011 Accident/Incident Report DI-SAFT-81563

DATA

A012 Gov't Industry Data Exchange Program (GIDEP) Alert Response DI-QCIC-80126B

A013 Gov't Industry Data Exchange Program (GIDEP) Alert/Safe-Alert Report DI-QCIC-80125B

A014 Engineering Change Proposal DI-SESS-80639D

A015 Software Development Plan DI-IPSC-81427A

A016 Software Version Description DI-IPSC-81442A

A017 Software Design Description DI-IPSC-81435A

A018 Interface Control Document DI-CMAN-81248B

A019 Software Requirements Specification DI-IPSC-81433A

A020 Interface Requirements Specification DI-IPSC-81434A

A021 Specification Change Notice DI-CMAN-80643D

A022 System/Subsystem Design Description DI-IPSC-81432A

A023 Interface Design Descriptions DI-IPSC-81436A

A024 Item Unique Identification Marking Plan DI-MGMT-80803

A025 Phase-Out Transition Plan DI-MGMT-81945

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ IAW1423 1 LO TBC

Proposed Period of Performance

+ IAW1423 1 LO

Program Management

Item No.

Quantity U/I Unit Price Amount

Program Management

12 MO

Program Management Program Management IAW PWS dated 2 Feb 2017, para. 4.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Maintenance Support

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

12 MO

Maintenance Support Maintenance Support IAW PWS dated 2 Feb 2017, para. 4.4.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None

Maintenance Support

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Over and Above

Item No.

Cost Plus Fixed Fee Quantity U/I Unit Price Fixed Fee Est Total Cost 1 LO To be Negotiated To be Negotiated

Over and Above Over and Above IAW PWS dated 2 Feb 2017, para. 4.6.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

Training (1 Week Course)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Unit Price Amount

1 EA 5 EA

Training (1 Week Course) Training (1 Week Course) IAW PWS dated 2 Feb 2017, para. 9.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBC

Proposed Period of Performance

IAW PWS 1 EA

Pricing for CLIN X003 for the Base Year and Option Year II will be included as a part of the Total Evaluated Price (TEP). However, this CLIN will be negotiated in Option Years III, IV, and V.

Block Cycle & Software Upgrades

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Block Cycle & Software Upgrades Block Cycle & Software Upgrades IAW PWS dated 2 Feb 2017, all paras in section 8.0.

Block Cycle & Software Upgrades

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Cybersecurity Cybersecurity IAW PWS dated 2 Feb 2017, all paras in section 6.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

None

Cybersecurity

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

GFE Management

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

GFE Management GFE Management IAW PWS dated 2 Feb 2017, para 4.3.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of

Repair (Minor)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Amount

1 EA 50 EA

Repair (Minor) Minor Repairs IAW PWS dated 2 Feb 2017, para. 4.5.1.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Proposed Period of Performance

IAW PWS 1 EA

Repair (Major)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Unit Price Amount

1 EA 50 EA

R408 Repair (Major) Major Repairs IAW PWS dated 2 Feb 2017, para. 4.5.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

Repair (Major)

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity

None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Proposed Period of Performance

IAW PWS 1 EA

Travel

Item No.

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost

1 LO

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER

Travel IAW PWS dated 2 Feb 2017, para. 4.9. All Travel shall be IAW Joint Travel Regulations (JTR) and FAR 31.2.

Priority: R ROUTINE

Contractor Furnished Material (CFM)

Item No.

Cost Reimbursement - No Fee Quantity U/I Estimated Unit Price Total Estimated Cost

1 LO

Contractor Furnished Material (CFM) Consumable/Expendable GFE Items PWS dated 2 Feb 2017, para. 4.3.1.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

Contractor Furnished Material (CFM)

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

DATA

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

DATA

Data IAW PWS dated 2 Feb 2017, para 7.0. See attached DD1423s.

ELIN Title Data Acq Doc #

A001 Presentation Material DI-ADMN-81373

A002 Conference Minutes DI-ADMN-81249, 81250B

A003 Diminishing Source of Supply and Material Shortage (DMSMS) DI-MGMT-81948

A004 Configuration Management Plan DI-MGMT-81875

A005 Status Reports DI-MGMT-80368A

A006 Parts Approval Reuest DI-MISC-80071E

A007 Acceptance Test Plan DI-QCIC-80553A

A008 Technical Manual Contract Requirement (TMCR) TM-86-01P

A009 Product Drawings/Models and Associated Lists DI-SESS-81000E

A010 Provisioning DI-SESS-81758A, -81759A, -81874

A011 Accident/Incident Report DI-SAFT-81563

A012 Gov't Industry Data Exchange Program (GIDEP) Alert Response DI-QCIC-80126B

A013 Gov't Industry Data Exchange Program (GIDEP) Alert/Safe-Alert Report DI-QCIC-80125B

A014 Engineering Change Proposal DI-SESS-80639D

A015 Software Development Plan DI-IPSC-81427A

A016 Software Version Description DI-IPSC-81442A

A017 Software Design Description DI-IPSC-81435A

A018 Interface Control Document DI-CMAN-81248B

A019 Software Requirements Specification DI-IPSC-81433A

A020 Interface Requirements Specification DI-IPSC-81434A

A021 Specification Change Notice DI-CMAN-80643D

A022 System/Subsystem Design Description DI-IPSC-81432A

DATA

A023 Interface Design Descriptions DI-IPSC-81436A

A024 Item Unique Identification Marking Plan DI-MGMT-80803

A025 Phase-Out Transition Plan DI-MGMT-81945

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

+ IAW1423 1 LO TBC

Proposed Period of Performance

+ IAW1423 1 LO

Program Management

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

12 MO

Program Management Program Management IAW PWS dated 2 Feb 2017, para. 4.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Program Management

None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of Performance

IAW PWS 12 MO

Maintenance Support

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

12 MO

Maintenance Support Maintenance Support IAW PWS dated 2 Feb 2017, para. 4.4.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 12 MO TBC

Proposed Period of

IAW PWS 12 MO

Over and Above

Item No.

Cost Plus Fixed Fee Quantity U/I Unit Price Fixed Fee Est Total Cost 1 LO To be Negotiated To be Negotiated

Over and Above Over and Above IAW PWS dated 2 Feb 2017, para. 4.6.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Training (1 Week Course)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Unit Price Amount

1 EA 5 EA

Training (1 Week Course) Training (1 Week Course) IAW PWS dated 2 Feb 2017, para. 9.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Training (1 Week Course)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBC

Proposed Period of Performance

IAW PWS 1 EA

Pricing for CLIN X003 for the Base Year and Option Year II will be included as a part of the Total Evaluated Price (TEP). However, this CLIN will be negotiated in Option Years III, IV, and V.

Block Cycle & Software Upgrades

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Block Cycle & Software Upgrades Block Cycle & Software Upgrades IAW PWS dated 2 Feb 2017, all paras in section 8.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of

IAW PWS 1 LO TBC

Block Cycle & Software Upgrades

Proposed Period of

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Cybersecurity Cybersecurity IAW PWS dated 2 Feb 2017, all paras in section 6.0.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

GFE Management

Item No.

GFE Management

Quantity U/I Unit Price Amount

1 LO

GFE Management GFE Management IAW PWS dated 2 Feb 2017, para 4.3.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

Repair (Minor)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Amount

1 EA 50 EA

Repair (Minor) Minor Repairs IAW PWS dated 2 Feb 2017, para. 4.5.1.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

Repair (Minor)

None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Proposed Period of Performance

IAW PWS 1 EA

Repair (Major)

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Unit Price Amount

1 EA 50 EA

R408 Repair (Major) Major Repairs IAW PWS dated 2 Feb 2017, para. 4.5.2.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be determined _ Req No / Pri

Required Period of Performance

IAW PWS 1 EA

TBD

Proposed Period of Performance

IAW PWS 1 EA

Travel

Travel

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost

1 LO

TRAVEL AS APPROVED IN ADVANCE BY CONTRACTING OFFICER

Travel IAW PWS dated 2 Feb 2017, para. 4.9. All Travel shall be IAW Joint Travel Regulations (JTR) and FAR 31.2.

Priority: R ROUTINE

Contractor Furnished Material (CFM)

Item No.

Cost Reimbursement - No Fee Quantity U/I Estimated Unit Price Total Estimated Cost

1 LO

Contractor Furnished Material (CFM) Consumable/Expendable GFE Items PWS dated 2 Feb 2017, para. 4.3.1.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Class I ODS Substance Application/Use Quantity None Place of Perf Quantity (U/I) To be cited on individual orders issued hereunder

_ Req No / Pri

Required Period of Performance

IAW PWS 1 LO TBC

Proposed Period of Performance

IAW PWS 1 LO

DATA

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

DATA

DATA

Data IAW PWS dated 2 Feb 2017, para 7.0. See attached DD1423s.

ELIN Title Data Acq Doc #

A001 Presentation Material DI-ADMN-81373

A002 Conference Minutes DI-ADMN-81249, 81250B

A003 Diminishing Source of Supply and Material Shortage (DMSMS) DI-MGMT-81948

A004 Configuration Management Plan DI-MGMT-81875

A005 Status Reports DI-MGMT-80368A

A006 Parts Approval Reuest DI-MISC-80071E

A007 Acceptance Test Plan DI-QCIC-80553A

A008…