EXHIBIT_Q___TC25-8_Minimum_MAT_Specification_Requirements.pdf

This document is an exhibit containing minimum specification requirements for a MAT (Maintenance and Troubleshooting) system designated TC25-8.

The specification table outlines detailed technical requirements across multiple capability areas. Key MAT capacity requirements include a minimum load lift of 300 lbs, with time to lower and raise capabilities of 12 seconds each. The target weight is 400 lbs, with a minimum acceptable capacity of 90% of the target weight. Presentation requirements specify RF frequency ranges of 138-160 MHz (low) and 400-4220 MHz (high), along with bandwidth specifications of ≤ 12.5 kHz. Wire communications must support maximum distance of 8 km and maximum distance target of 8 km (RCS - Target). Cycles per hour cycles without regenerating power supply should meet 8,100 per 24 hours, with a mean time between failures standard of 2000 cycles. Power supply requirements mandate a 12V/24V AC, single-phase system with a 3.8 VAC and 100/240 VAC static design load specification. The document also references targeted liner standards of 350 with full barrel exposure of 50 wph, and includes movement speed specifications with a 0-200 km/h range and acceleration records within 10 km and 14-18 km/h distance parameters. Mean time between failures and system charging requirements are also specified.