EXHIBIT_X_-_Portable_HSAT_Specifications.pdf

This document is an appendix containing portable H-SAT (Hydra Support Ammunition Target) specification requirements from a federal contract solicitation (TC 25-8, dated 02 November 2021).

The H-SAT system must meet the following capability requirements: minimum load lift capacity of 300 pounds with lift and lower times of 12 seconds and 10 seconds respectively in zero wind conditions, maintaining the same times in 35 mph wind conditions. The target arm must weigh 400 pounds and be capable of accepting 4"x4" standard lumber target legs. The presentation requirement specifies that a minimum of 90 percent of the target shall be exposed above the berm with no part of the lifting arm exposed for direct fire. The MESH Network must support a maximum distance of 8 kilometers. Operational performance requirements include 20 cycles per hour capability with 150 cycles per 24 hours without regenerating the power supply, and a mean time between failures of 5,000 cycles. Power requirements are listed in the table but the specific details are not fully visible in the document. This specification establishes the baseline technical requirements that contractor solutions must achieve or exceed.