5012-850-1014B - 8' Mid-Mount Junior Wing.docx
DOCX document 18 KB Posted
- Attached to
- JPMC Dump Trucks
- Solicitation number
- 24-416CMS-BOSS4-B-41660
- Issued by
- Illinois
About this file
This document is a specification for an 8' Mid-Mount Junior Wing for the Illinois Tollway. The specification outlines the required features, including a full trip edge junior wing plow with a Kuper Tuca SX carbide insert or approved equal plow blades, a trailing link style wing post, adjustable flow control valves, and LED wing tip plow lights. The wing is to be mounted behind the cab and in front of the axle. All steel components must be shot-blasted and welding must comply with AWS procedures. The manufacturer is required to provide caution labels, decals, and any necessary warnings.
The related state and local contract opportunity is for JPMC Dump Trucks in the state of Illinois. No additional details are provided about the contract opportunity, such as response dates, award dates, or contract term.
View the file
Other files
Show all 44
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
8’ Mid-Mount Junior Wing Tollway
Specification 5012-850-1014B
All tandem Axle trucks to include a patrol wing
1. Full trip edge junior wing plow with AASHTO hole punch for cutting edge, Monroe Model MJW-8 or equivalent. This shall be a single wing mounted on the right or left side of the truck and be fully operational. Mounting location to be determined after award.
1. The wing post shall allow the toe of the wing moldboard to float freely over rough road and shoulders, thus, reducing the possibility of damage to the wing and cab/chassis. The wing post shall be a trailing link style with 12 inches of lift and designed to allow the moldboard to float up a minimum of 8-12” when in the plowing position. The post front structure shall be no more than 24” high and 14” wide.
1. Kuper Tuca SX carbide insert or Tollway approved equal plow blades, to include Kuper curb guard GX300.
1. Wing shall have locally installed adjustable flow control valve(s) to control wing lowering and raising speeds. Wing travel speed shall be adjustable from the fully raised position to the fully lowered position.
1. Hydraulic connection to wing cylinders to be JIC male/female connection, no quick couplers.
1. Wing to have 12” deflector flap to help snow roll forward.
1. Frame cross post shall be bolt on and replaceable without removing truck frame side plates.
1. The wing shall be designed to mount behind the cab and in front of the axle and be visible in the spot mirror whether it is in the raised or down position.
1. Prior to powder coating, all steel components shall be shot-blasted to prepare the steel surface.
1. All welding performed on the wing and mounting hardware must be in compliance with current AWS procedures and guidelines.
1. Manufacturer shall provide caution labels, decals, and any warnings deemed necessary.
1. L.E.D. wing tip plow lights shall be installed on the outer board end of the wing plow. Whelen amber oval LED light Model# WPLOW3AA Whelan or approved equal shall be provided and mounted in a stainless-steel enclosure.
File details come from the government source that posted it. Updated .