2D BEQ FC66-HP476-BB137 Chiller Repairs Detail.pdf
PDF 388 KB Posted
- Attached to
- BEQ Chiller Repairs FC66, HP476, BB137, etc
- Solicitation number
- N4008526R9014
About this file
This document is a mechanical details and schedule revision drawing dated 08-07-2025 for Marine Corps Base facility work, specifically depicting a chiller installation detail (Sheet M501).
The drawing illustrates a detailed cross-section of a chiller unit mounted on a concrete equipment pad with specific structural requirements and mechanical components. Key specifications include a 6-inch equipment pad with a minimum thickness of 10 inches and positioned a minimum of 6 inches above grade. The drawing labels critical mechanical components including relief valve, cleanout tee, vibration isolator, strainer, temperature gauge, isolation valves, bypass valve, and check valve. The chiller is supported on vibration isolation mounts and requires clearance for serviceability around the unit. The document notes that the equipment pad must have adequate thickness to support the chiller while maintaining proper drainage and vibration isolation. Additional callouts reference a low-point drain with a sediment collection valve and circuit setter for system operation. The drawing is marked as "PRELIMINARY" and includes standard title block information indicating project identification as M501 for Marine Corps Base, with revision tracking and drawing control information.
View the file
Other files
Show all 28
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
08-07-2025 M501
MECHANICAL DETAILS
AND SCHEDULE
REVISIONS:
FSBYPASS VALVE
ISOLATION VALVE
ISOLATION VALVE
CHECK VALVE
PRESS. / TEMP.
PORT
Low Point Drain with valve and plug Both the Supply and Return Piping must have Low-Point Drains.
CIRCUIT SETTER
STRAINER
TEMPERATURE
GAUGE, TYP.
FLOW SWITCH
VIBRATION
ELIMINATOR
CLEANOUT TEE
WITH VENT
CLEANOUT TEE
RELIEF VALVE
6"
EQUIPMENT PAD MUST HAVE A
MINIMUM THICKNESS OF 10 INCHES
AND BE A MINIMUM OF 6 INCHES
ABOVE GRADE.
GRADE
PRESSURE
GAUGE
VIBRATION ISOLATION, TYP.
NOT TO SCALE1 CHILLER DETAIL
AutoCAD SHX Text
SATISFACTORY TO: DATE
AutoCAD SHX Text
APPROVED: PWO OR OICC DATE
AutoCAD SHX Text
DESIGN DIR.
AutoCAD SHX Text
SUBMITTED BY:
AutoCAD SHX Text
DR.
AutoCAD SHX Text
CHK.
AutoCAD SHX Text
DES.
AutoCAD SHX Text
CONST. CONTR.
AutoCAD SHX Text
MARINE CORPS BASE
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text E1
AutoCAD SHX Text
SIZE
AutoCAD SHX Text 80091
AutoCAD SHX Text
SPEC.
AutoCAD SHX Text
CODE IDENT. NO
AutoCAD SHX Text
NAVFAC DRAWING NO.
AutoCAD SHX Text
SHEET OF
AutoCAD SHX Text
CAMP LEJEUNE, NORTH CAROLINA
AutoCAD SHX Text
DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND
AutoCAD SHX Text
PRELIMINARY
AutoCAD SHX Text
EXAMPLE
AutoCAD SHX Text
CHILLER DETAIL
AutoCAD SHX Text
NOTED
AutoCAD SHX Text 05-25-0078
AutoCAD SHX Text
AutoCAD SHX Text N40085-25-B-0078
AutoCAD SHX Text
J. REED, PE
AutoCAD SHX Text 60042230
AutoCAD SHX Text
AutoCAD SHX Text
CJM
AutoCAD SHX Text
CJM
AutoCAD SHX Text
CJM
AutoCAD SHX Text
CJM
| Sheets and Views |
| M501 |
File details come from the government source that posted it. Updated .