B08_Attachment_4_-_Balclutha_International_Inspections_UT_Report_2017_0001.pdf
PDF 1 MB Posted
- Attached to
- GOGA - NHL BALCLUTHA HAUL OUT
- Solicitation number
- 140P8526Q0019
About this file
This document is Attachment 4 containing Ultrasonic Thickness (UT) Inspection Reports for the vessel BALCLUTHA conducted by International Inspection, Inc. in 2017.
The inspection reports document three separate ultrasonic thickness measurement surveys conducted on the BALCLUTHA during 2017. The first survey in August 2017 inspected hull plating from the keel through G strakes along the full length of the vessel while dry-docked at Bay Ship and Yacht in Alameda, California. The second survey in October 2017 examined forward, mid, and aft mast and band plating. The third survey, also conducted in October 2017, inspected spar plating on seven different sections identified as A-C, B-C, C-C, A-A, B-A, A-B, and B-B. All surveys were conducted by International Inspection personnel with Mr. Jim Hayes representing the vessel owners. The technician conducting all surveys was Mr. Maxwell Smith (credentials A1495 and A1516). The reports include detailed technical drawings and measurement data presented in graphical format, with thickness readings documented at multiple points across each inspected component. Percent wastage calculations were based on historic American engineering records from the vessel's original construction specifications. Areas of heavily pitted sections and pitted areas with remaining wall thickness ranges are specifically noted on the spar plating inspection drawings.
View the file
Other files
Show all 32
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 4
BALCLUTHA 2017 INTERNATIONAL
INSPECTIONS UT READINGS
Specialists in Nondestructive Examination
Seattle: 3229 S. 148 th
Street, SeaTac, WA 98168 Phone: 206/766-8180 Fax: 206/766-8186 Portland: 10521 N. Lombard Street, Portland, OR 97203 Phone: 503/283-2668 Fax: 503/283-7656
Oakland: 1813 Clement Ave., Bldg 24, Alameda, CA 94501 Phone: 510/748-0964 Fax: 510/748-9874 Los Angeles: 10600 Pioneer Blvd., Unit A, Santa Fe Springs, CA 90670 Phone: 562/944-3166 Fax: 562/944-3114 San Diego: 2704 Transportation Ave., Unit C, National City, CA 94501 Phone: 619/512-5858 Fax: 619/512-5859 www.iinspect.com Balclutha CVR – Page 1 of 2
All drawings, specifications, and copies thereof furnished by International Inspection, Inc. (hereafter, “the Work Product”) are and shall remain the property of International Inspection, Inc. The Work Product is to be used only with respect to work on the vessel/project listed above (hereafter, “The Project”) and is not to be used on any other project or delivered to any person or entity not directly involved with The Project. Submission or distribution of the Work Product to meet official regulatory requirements for other purposes in connection with The Project is not to be construed as publication in derogation of International Inspection, Inc.’s common law copyright or other reserved rights to Work Product.
Copyright (c) 2017 International Inspection, Inc.
BALCLUTHA
Hull Plating
Ultrasonic Thickness Inspection
AUGUST 2017
Seat t le Por t land Oak land Los Ange les San Diego www.iinspect.com Balclutha CVR – Page 2 of 2
Ultrasonic thickness measurements were obtained for BAY SHIP AND YACHT on the vessel BALCLUTHA in August 2017 while on dry dock at Bay Ship and Yacht in Alameda, CA. The owners were represented by Mr. Jim Hayes. The survey was conducted by International Inspection personnel.
EXTENT OF SURVEY
The following items were inspected:
Hull Plating – Full Length o Keel through G Strakes.
RESULTS OF SURVEY
The results are shown within the following report.
Respectfully submitted, Mr. Maxwell Smith Technician A1495
EXPANSION PLAN
HULL PLATING - FORWARD SECTION
BALCLUTHA
EXPANSION PLAN
HULL PLATING - AFT SECTION
th
Street, SeaTac, WA 98168 Phone: 206/766-8180 Fax: 206/766-8186 Portland: 10521 N. Lombard Street, Portland, OR 97203 Phone: 503/283-2668 Fax: 503/283-7656
Oakland: 1813 Clement Ave., Bldg 24, Alameda, CA 94501 Phone: 510/748-0964 Fax: 510/748-9874 Los Angeles: 10600 Pioneer Blvd., Unit A, Santa Fe Springs, CA 90670 Phone: 562/944-3166 Fax: 562/944-3114 San Diego: 2704 Transportation Ave., Unit C, National City, CA 94501 Phone: 619/512-5858 Fax: 619/512-5859 www.iinspect.com BALCLUTHA CVR – Page 1 of 2
All drawings, specifications, and copies thereof furnished by International Inspection, Inc. (hereafter, “the Work Product”) are and shall remain the property of International Inspection, Inc. The Work Product is to be used only with respect to work on the vessel/project listed above (hereafter, “The Project”) and is not to be used on any other project or delivered to any person or entity not directly involved with The Project. Submission or distribution of the Work Product to meet official regulatory requirements for other purposes in connection with The Project is not to be construed as publication in derogation of International Inspection, Inc.’s common law copyright or other reserved rights to Work Product.
Copyright (c) 2017 International Inspection, Inc.
BALCLUTHA
MAST & BAND PLATING
October 2017 www.iinspect.com BALCLUTHA CVR – Page 2 of 2
Ultrasonic thickness measurements were obtained for Bay Ship and Yacht on the vessel “Balclutha” on October 17TH, 2017 at Bay Ship and Yacht in Alameda, CA. The owners were represented by Mr. Jim Hayes. The survey was conducted by International Inspection personnel.
EXTENT OF SURVEY
The following items were inspected:
o Mast Plating:
Forward Mast and Band Plating.
Mid Mast and Band Plating.
Aft Mast and Band Plating.
RESULTS OF SURVEY
The results are shown within the following report.
Respectfully submitted, Mr. Maxwell Smith
A1516
V
IE
W E
D L
O O
K
IN
G T
O S
T A
R B
O A
R D
S
ID
E F
O R
W A
R D
M A
S T
P L
A T
IN
G
A N
D S
U P
P O
R T
B A
N D
S B
A L
C L
U T
H A
W E
D L
O O
K
IN
G T
O S
T A
R B
O A
R D
S
ID
E M
ID
M
A S
T P
L A
T
IN
G A
N D
S U
P P
O R
T B
A N
D S
B A
L C
L U
T
W E
D L
O O
K
IN
G T
O S
T A
R B
O A
R D
S
ID
E A
F T
M A
S T
P L
A T
IN
G
A N
D S
U P
P O
R T
B A
N D
S B
A L
C L
U T th
Street, SeaTac, WA 98168 Phone: 206/766-8180 Fax: 206/766-8186 Portland: 10521 N. Lombard Street, Portland, OR 97203 Phone: 503/283-2668 Fax: 503/283-7656
Oakland: 1813 Clement Ave., Bldg 24, Alameda, CA 94501 Phone: 510/748-0964 Fax: 510/748-9874 Los Angeles: 10600 Pioneer Blvd., Unit A, Santa Fe Springs, CA 90670 Phone: 562/944-3166 Fax: 562/944-3114 San Diego: 2704 Transportation Ave., Unit C, National City, CA 94501 Phone: 619/512-5858 Fax: 619/512-5859 www.iinspect.com BALCLUTHA CVR – Page 1 of 2
All drawings, specifications, and copies thereof furnished by International Inspection, Inc. (hereafter, “the Work Product”) are and shall remain the property of International Inspection, Inc. The Work Product is to be used only with respect to work on the vessel/project listed above (hereafter, “The Project”) and is not to be used on any other project or delivered to any person or entity not directly involved with The Project. Submission or distribution of the Work Product to meet official regulatory requirements for other purposes in connection with The Project is not to be construed as publication in derogation of International Inspection, Inc.’s common law copyright or other reserved rights to Work Product.
Copyright (c) 2017 International Inspection, Inc.
BALCLUTHA
SPAR PLATING
October 2017 www.iinspect.com BALCLUTHA CVR – Page 2 of 2
Ultrasonic thickness measurements were obtained for Bay Ship and Yacht on the vessel “Balclutha” on October 12th and 13th, 2017 at Bay Ship and Yacht in Alameda, CA. The owners were represented by Mr. Jim Hayes. The survey was conducted by International Inspection personnel.
EXTENT OF SURVEY
The following items were inspected:
Spar Plating:
o A-C o B-C o C-C o A-A o B-A o A-B o B-B
RESULTS OF SURVEY
The results are shown within the following report.
Respectfully submitted, Mr. Maxwell Smith
A1516
LOOKING FORWARD
TYPE A & B SPAR PLATING - UT INSPECTION
LOOKING FORWARD
TYPE C SPAR PLATING - UT INSPECTION
File details come from the government source that posted it. Updated .