B08_Attachment_16_-_International_Paint_Specifications_0001.pdf

ATTACHMENT 16

BALCLUTHA INTERNATIONAL PAINT

TECHNICAL SPECIFICATIONS

Where legislation does not explicitly restrict or limit the use of lead containing coatings it is the responsibility of the client to inform International Paint in writing of their specific requirements

Technical Specification

2026 Drydocking (Keel to Caprail)

BALCLUTHA

National Parks Service

California- San Francisco, United States

07-Jan-2026

JCUS01-3RT8-7W4X/1

Joshua Collingwood josh.collingwood@akzonobel.com

C. 858-888-0440

INTERNATIONAL PAINT SHALL NOT BE HELD RESPONSIBLE FOR SQUARE FEET ESTIMATES IN INTERSPEC. SQUARE FEET ESTIMATES SHALL BE CONFIRMED WITH OWNER.

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

BALCLUTHA

DRAFT

Main Schemes Area Description Area (ft²)

1. Item 3.01 Preparation & Painting The Underwater Body (Keel to Waterline)

An Intertuf 264 epoxy anticorrosive scheme with an Interspeed 6400NA controlled depletion polymer antifouling system. 13,060

2. Item 3.01 Preparation & Painting The Underwater Body (Waterline to Boot- Top)

An Intertuf 264 epoxy scheme with an Interthane 990V polyurethane finish. 4,000

3. Item 3.02 Preparation & Painting Topsides (Above Waterline Hull & Bulwarks)

An Intertuf 264 epoxy scheme with an Interthane 990V polyurethane finish. 9,600

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

1. Item 3.01 Preparation & Painting The Underwater Body (Keel to Waterline) [13,060 ft²]

An Intertuf 264 epoxy anticorrosive scheme with an Interspeed 6400NA controlled depletion polymer antifouling system.

Surface Preparations Hard scrape/slice to remove all fouling and loose paint Close high pressure fresh water wash at 3,000 psi (207 bar) using a fan jet lance holding the tip 150mm from and perpendicular to the surface overlapping each pass 30% removing all dirt, dust salt, partially hydrolised antifouling layer and other surface contamination.

Full blast to ISO 8501-1 Sa2 or SSPC-SP6.

Remove all dust and surface contamination. Ensure all surfaces are clean, dry and free of contamination prior to the application of each coat of the specified paint system. Apply the first coat of the specified paint system before there is a risk of loss of surface preparation and cleanliness standards.

Product Paint Type Volume Solids (%)

Sales Code Colour Coats WFT (mil)

DFT

(mil)

% Loss factor

PSR

(ft²/G)

Volume (G)

Thinner

Intergard 264 Epoxy 80 FPL274/FPA327 Red FC 10 8 35 105.94 123.30 GTA220

Intergard 264 Epoxy 80 FPJ034/FPA327 Light Grey 15% SC 0 0 35 282.78 6.90 GTA220

Intergard 264 Epoxy 80 FPL274/FPA327 Red 15% SC 0 0 35 282.78 6.90 GTA220

Intergard 264 Epoxy 80 FPJ034/FPA327 Light Grey FC 7.5 6 35 140.98 92.60 GTA220

Interspeed 640 TBT Free Polishing Antifouling

62 BRA640 Red FC 8.1 5 35 131.20 99.50 GTA007

Interspeed 640 TBT Free Polishing Antifouling

62 BRA642 Black FC 8.1 5 35 131.20 99.50 GTA007

Interspeed 640 TBT Free Polishing Antifouling

62 BRA640 Red FC 8.1 5 35 131.20 99.50 GTA007

Micron CSC 55 Y5584 Shark White

1% TU 7.3 4 15 190.69 0.70

49.1 33 528.90

Scheme notes

*For SP6 or SP7 or a combination of SP6/SP7, IP recommends applying two full coats of AC with a stripe coat of AC.

*A stripe coat shall be applied to all seams and rivets for each anti-corrosive coat applied.

*Micron CSC, Shark White, to be applied to all underwater hull markings.

301'L x 39'L x 23'D x 14'WL

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

Added second stripe coat per your spec

2. Item 3.01 Preparation & Painting The Underwater Body (Waterline to Boot-Top) [4,000 ft²]

An Intertuf 264 epoxy scheme with an Interthane 990V polyurethane finish.

Surface Preparations Hard scrape/slice to remove all fouling and loose paint Close high pressure fresh water wash at 3,000 psi (207 bar) using a fan jet lance holding the tip 150mm from and perpendicular to the surface overlapping each pass 30% removing all dirt, dust salt, partially hydrolised antifouling layer and other surface contamination.

Full blast to ISO 8501-1 Sa2 or SSPC-SP6.

Remove all dust and surface contamination. Ensure all surfaces are clean, dry and free of contamination prior to the application of each coat of the specified paint system. Apply the first coat of the specified paint system before there is a risk of loss of surface preparation and cleanliness standards.

Product Paint Type Volume Solids (%)

Sales Code Colour Coats WFT (mil)

DFT

(mil)

% Loss factor

PSR

(ft²/G)

Volume (G)

Thinner

Intergard 264 Epoxy 80 FPL274/FPA327 Red FC 10 8 35 105.94 37.80 GTA220

Intergard 264 Epoxy 80 FPJ034/FPA327 Light Grey 15% SC 0 0 35 282.78 2.10 GTA220

Intergard 264 Epoxy 80 FPL274/FPA327 Red 15% SC 0 0 30 304.37 2.00 GTA220

Intergard 264 Epoxy 80 FPL274/FPA327 Red FC 7.5 6 35 140.98 28.40 GTA220

Interthane 990V Polyurethane Finish 71 QIA044/QIA046 Base Ultra Deep

FC 4.2 3 35 250.99 15.90 GTA056

Interthane 990V Polyurethane Finish 71 QIB000/QIA046 White 1% TU 4.2 3 30 270.14 0.20 GTA056

25.9 20 86.40

Scheme notes

*For SP6 or SP7 or a combination of SP6/SP7, IP recommends applying two full coats of AC with a stripe coat of AC.

*A stripe coat shall be applied to all seams and rivets for each anti-corrosive coat applied.

*Interthane 990V, Red, to be applied to Boot-Top. (14'D to 20'D) *Interthane 990V, White, to be applied to all above the water hull markings.

NOTE: Red topcoat color to be determined by Owner Representative.

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

BALCLUTHA

What is new boot topping line. Red currently goes up to the 20' draft mark.

Do you want an Alky topcoat or a urethane topcoat for the boot topping? Your Spec has Alky, but I listed urethane in Interspec as we typically use urethane for superior gloss and color retention. Please advise.

Drawdowns being sent to you for Reds--Signal Red (C287), Ensign Red (B295) and Red (L274). Red (L274) is closest to A/F color.

RED

3. Item 3.02 Preparation & Painting Topsides (Above Waterline Hull & Bulwarks) [9,600 ft²]

An Intertuf 264 epoxy scheme with an Interthane 990V polyurethane finish.

Surface Preparations Close high pressure fresh water wash at 3,000 psi (207 bar) using a fan jet lance holding the tip 150mm from and perpendicular to the surface overlapping each pass 30% removing all dirt, dust salt, partially hydrolised antifouling layer and other surface contamination.

Full blast to ISO 8501-1 Sa2 or SSPC-SP6.

Remove all dust and surface contamination. Ensure all surfaces are clean, dry and free of contamination prior to the application of each coat of the specified paint system. Apply the first coat of the specified paint system before there is a risk of loss of surface preparation and cleanliness standards.

Product Paint Type Volume Solids (%)

Sales Code Colour Coats WFT (mil)

DFT

(mil)

% Loss factor

PSR

(ft²/G)

Volume (G)

Thinner

Intergard 264 Epoxy 80 FPL274/FPA327 Red FC 10 8 35 105.94 90.60 GTA220

Intergard 264 Epoxy 80 FPJ034/FPA327 Light Grey 15% SC 0 0 35 211.88 6.80 GTA220

Intergard 264 Epoxy 80 FPJ034/FPA327 Light Grey FC 10 8 35 105.94 90.60 GTA220

Interthane 990V Polyurethane Finish 71 QIA033/QIA046 Base Medium

40% TU 4.2 3 35 250.99 15.30 GTA056

Interthane 990V Polyurethane Finish 71 QIB000/QIA046 White 20% TU 4.2 3 35 250.99 7.70 GTA056

Interthane 990V Polyurethane Finish 71 QIY999/QIA046 Black 40% TU 4.2 3 35 250.99 15.30 GTA056

Interthane 990V Polyurethane Finish 71 QIA055/QIA046 Base Yellow 5% TU 4.2 3 35 250.99 1.90 GTA056

36.8 28 228.20

Scheme notes

*For SP6 or SP7 or a combination of SP6/SP7, IP recommends applying two full coats of AC with a stripe coat of AC.

*A stripe coat shall be applied to all seams and rivets for each anti-corrosive coat applied.

*Interthane 990V, Light Grey (????), White (B000), Black (Y999) & Yellow/Gold (????) to be applied above the Boot-Top to the Cap Rail.

*Interthane 990V, White (B000) and Yellow (????), to be applied to all above the water hull markings.

NOTE: Light Grey and Yellow/Gold topcoat colors to be determined by Owner Representative.

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

BALCLUTHA

LT Grey

YELLOW

Do you want an Alky topcoat or a urethane topcoat for the boot topping? Your Spec has Alky, but I listed urethane in Interspec as we typically use urethane for superior gloss and color retention. Please advise.

Drawdowns being sent to you for Light Grey--Haze Grey (K705), Storm Grey (K724) and Surf Grey (F684). For the Yellow/Gold, I am sending you Yellow (B134) and Safety Yellow (X34Z).

Product List Product Volume Solids (%) Sales Code Colour Volume

(G)

Intergard 264 80 FPJ034/FPA327 Light Grey 200.00

Intergard 264 80 FPL274/FPA327 Red 290.00

Interspeed 640 62 BRA640 Red 200.00

Interspeed 640 62 BRA642 Black 100.00

Interthane 990V 71 QIA033/QIA046 Base Medium 15.30

Interthane 990V 71 QIA044/QIA046 Base Ultra Deep 20.00

Interthane 990V 71 QIA055/QIA046 Base Yellow 5.00

Interthane 990V 71 QIB000/QIA046 White 10.00

Interthane 990V 71 QIY999/QIA046 Black 20.00

Micron CSC 55 Y5584 Shark White 1.00

Total 861.30

Total volume (G): 861.30

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

Application Notes

INTERNATIONAL PAINT SHALL NOT BE HELD RESPONSIBLE FOR SQUARE FEET ESTIMATES IN INTERSPEC. SQUARE FEET ESTIMATES SHALL BE CONFIRMED WITH OWNER.

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

Terms and Conditions

This confidential document is for the use of the above named client and its contents should not be reproduced or transmitted without prior written permission from International Paint. The information is given in good faith and attention to the following statement : The information given in this report is not intended to be exhaustive and any person using any products for any purpose other than that specifically recommended in this report without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. Any warranty, if given, or specific Terms & Conditions of Sale are contained in International Paints Terms and Conditions of Sale, a copy of which can be obtained on request. Whilst we endeavour to ensure that all advice we give about the product (whether in this report or otherwise) is correct we have no control over either the quality or condition of the substrate or the many factors affecting the use and application of this product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever for howsoever arising for the performance of our products or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product. The information contained in this report is liable to modification from time to time in the light of experience and our policy of continuous product development. It is the user's responsibility to check that upto date product data sheets are obtained prior to using the products and that local environmental controls that may be in force are observed when using any of our products. Health & Safety Products referred to in this report are intended for use only by professional applicators in industrial situations in accordance with the advice given on our Technical Datasheetst, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS). All work involving the application and use of this product should be performed in compliance with all relevant national Health, Safety & Environment standards and regulations. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. If in doubt regarding the suitability of use of this product, consult International Paint for further advice.

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

Terms and Conditions of Sale

SCOPE: As used herein, “AkzoNobel” means the AkzoNobel entity identified above; “Buyer” means the purchaser of Products from AkzoNobel and “Products” means any and all goods sold by 1.

AkzoNobel to Buyer. Unless a detailed product sales agreement is in place between AkzoNobel and Buyer covering the sale of the Products, all Products sold or otherwise provided by AkzoNobel are sold or provided exclusively on the basis of these Terms and Conditions of Sale. No differing or supplemental terms or conditions shall be applicable unless expressly agreed to by AkzoNobel in writing.

OFFER / ACCEPTANCE: A quotation from AkzoNobel does not constitute an offer but an invitation to Buyer to make an offer. In all cases Buyer’s offer shall be deemed based on these Terms and 2.

Conditions of Sale. An agreement comes into effect only when AkzoNobel accepts Buyer’s offer.

DELIVERY / TRANSFER OF RISK: Delivery terms shall be interpreted in accordance with the latest INCOTERMS valid at the date the order is accepted. Unless otherwise agreed to by AkzoNobel in 3.

writing the delivery term is EXW and risk of loss in the Products will transfer to Buyer upon tender of the Products to Buyer or the carrier at AkzoNobel’s shipping facility. Buyer shall be responsible for all storage and other costs relating to Buyer’s failure to accept delivery pursuant hereto. The method and agency of transportation, unless otherwise agreed to in writing, may be selected by AkzoNobel and AkzoNobel reserves the right to ship collect. AkzoNobel’s receipt from the carrier shall be conclusive evidence of delivery and the amount delivered. Shipping and delivery dates are approximate and are given by AkzoNobel in good faith, but are not guaranteed unless otherwise specifically agreed in writing.

QUANTITY VARIATIONS: Buyer will pay for the quantity delivered and may not reject any delivery of Product on the grounds of variation of quantity where such variation is not more than 10% of the 4.

quantity ordered.

RETURNS: No Products may be returned for any reason without AkzoNobel’s written authorization. Tinted product and special orders may not be returned at any time. If AkzoNobel authorizes a 5.

return, Buyer must return the Products in clean, resalable condition. If returned for reasons other than AkzoNobel’s error in filling Buyer’s order, the Buyer will receive a credit in the amount of the billed price of the Products returned less 20% for handling, if returned within 90 days of the invoice date. Amount of credit for materials returned after 90 days is subject to negotiation. Products returned to AkzoNobel are to be shipped by the Buyer DDP AkzoNobel’s designated warehouse.

PRICE AND PAYMENT: Unless otherwise agreed by the Parties, the price for the Products will be the price quoted by AkzoNobel. All prices quoted by AkzoNobel are exclusive of value added tax and 6.

any other tax that may apply in respect of the Products. AkzoNobel will issue invoices to Buyer for all Products sold to Buyer. Buyer shall pay these invoices within thirty (30) days from the invoice date in the currency indicated on the invoice at the address of AkzoNobel indicated on the invoice. Any amounts not paid in accordance with invoiced terms shall bear interest at a rate of one and one-half percent (1.5%) per month or, if less, the highest rate permitted by applicable law. Buyer may not withhold payment of any amount due to AkzoNobel because of any set-off, counter-claim, abatement or similar deduction. Upon demand Buyer will immediately reimburse AkzoNobel for any and all costs including fees for collection agencies and attorneys incurred or expended by AkzoNobel to collect any amounts due from Buyer.

RETENTION OF TITLE: AkzoNobel retains a security interest in all Products delivered to Buyer to secure payment in full of all amounts due to AkzoNobel and Buyer shall, upon AkzoNobel’s request, 7.

execute such documentation as AkzoNobel deems necessary to perfect or maintain its security interest in the Products. Title to the Products passes to Buyer (subject to AkzoNobel’s security interest) at the time risk of loss passes to Buyer. Buyer may sell the Products in the ordinary course of its business, but may not pledge, mortgage or otherwise encumber the Products prior to payment in full of the purchase price.

WARRANTY / BUYER’S RIGHTS: AkzoNobel warrants to Buyer that at the time of transfer of risk of loss the Products conform to AkzoNobel’s standard Product specifications or such other 8.

specifications as AkzoNobel and Buyer have expressly agreed to in writing (the “ Specifications”). THIS WARRANTY IS THE SOLE WARRANTY GIVEN BY AKZONOBEL. AKZONOBEL MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE PRODUCTS, THE APPLICATION OR USE THEREOF, OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, EACH OF WHICH IS SPECIFICALLY DISCLAIMED. In the event Products do not comply with the foregoing warranty, AkzoNobel will, at its option, repair or replace such Products or refund the Price of the Products and, having done so, will have no further liability. Buyer must notify AkzoNobel of any claim Products do not comply with the foregoing warranty within seven (7) days after Buyer becomes aware of such claim but in no event later than thirty (30) days after delivery of the Product to Buyer.

Buyer’s failure to notify AkzoNobel of any such claim within the time set out in the preceding sentence will constitute a waiver by Buyer of such claim. AkzoNobel makes no warranty of any kind with

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026

Terms and Conditions of Sale respect to any services provided to Buyer and shall have no liability with respect to such services. Seller’s Warranty does not apply to any Products identified as obsolete, substandard, or past the recommended shelf-life, which are sold “AS IS, WHERE IS.”

LIMITATION OF LIABILTY: AkzoNobel will not be liable for any loss or damage caused by Buyer’s failure to exercise effective quality control or the failure to store, use or otherwise handle the Products 9.

as advised or in accordance with instructions provided by AkzoNobel or industry standards. AKZONOBEL WILL NOT BE LIABLE TO BUYER, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), BREACH OF STATUTORY DUTY OR OTHERWISE FOR ANY LOSS OF PROFIT, LOSS OF BUSINESS, DIMINUTION IN VALUE, OR DEPLETION OF GOODWILL OR ANY INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL LOSS OR DAMAGE. AKZONOBEL’S AGGREGATE LIABILITY TO BUYER IN RESPECT OF ALL LOSSES ARISING UNDER OR IN CONNECTION WITH THE SUPPLY OF PRODUCTS WILL IN NO WAY EXCEED THE PRICE OF THE PRODUCTS PURCHASED, OR $1,000,000, WHICHEVER IS LOWER. Nothing in this section will limit or exclude AkzoNobel’s liability for any matter in respect of which it is unlawful for AkzoNobel to exclude or restrict its liability.

HEALTH & SAFETY OF WORKERS: Buyer expressly assumes all liability resulting from, or in any way connected with, the possession, handling and/or use by its employees, agents, or clients of the 10.

Products. Buyer hereby agrees to indemnify, defend and hold AkzoNobel and its affiliates harmless fro m all claims, judgments, losses or expenses and any costs (including, but not limited to court costs and attorney’s fees) in any way related to Buyer’s or its subcontractor’s failure to comply with any of the foregoing.

FORCE MAJEURE: AkzoNobel will not be liable in any respect for failure to perform its obligations if hindered or prevented, directly or indirectly by war (declared or undeclared), national emergency, 11.

inadequate transportation facilities, machinery or equipment failure, AkzoNobel’s inability to secure materials, supplies, fuel or power for the manufacture of Product on terms and conditions that are acceptable to AkzoNobel, fire, flood, windstorm or other act of God, strike, lockout or other labour dispute, order or act of any government, whether foreign, national or local, whether valid or invalid, or any other cause of like or different kind beyond the reasonable control of AkzoNobel (each a “Force Majeure”). AkzoNobel shall have no obligation to procure any Products from other sources and may allocate its available supply of Products among the members of the AkzoNobel Group (including itself) and their customers, buyers, distributors and resellers on whatever basis AkzoNobel may deem fair and practical. In the event that the duration of a Force Majeure exceeds thirty (30) days or is reasonably expected to exceed 30 days, AkzoNobel is entitled to withdraw from any obligation it may have to supply the Products to Buyer without the Buyer having any right to compensation.

EXPORT CONTROL: Buyer will not sell, export, re-export, license, transmit, divert or otherwise transfer, directly or indirectly, any Product or any information or technology related to the Product 12.

except in accordance with applicable laws and regulations, including without limitation applicable UN, US and EU export control laws and regulations and the laws and regulations of the country where Buyer is resident. Buyer acknowledges that it will (i) take all steps necessary to comply with the above laws and regulations, including obtaining export and other licenses if necessary and (ii) not take any actions that would cause AkzoNobel to be in violation of the above laws.

TERMINATION: An agreement with Buyer to deliver Products on the basis of these Terms and Conditions will not oblige AkzoNobel for the future to take further orders. AkzoNobel will at all times be 13.

entitled to end the relationship. Such termination will never entitle Buyer to compensation.

MARITIME LIEN: This agreement is subject to the general maritime laws of the United States of America. Such laws shall also govern, without limitation, all issues concerning the enforcement, 14.

application and status of maritime liens. No attempt to waive, negate or nullify the supplier’s maritime l ien against the vessel or waive the vessel’s ultimate liability for the costs of products supplied is acceptable. Any attempt to do so, particularly by endorsing delivery receipts, will be of no effect or validity. Please inform the Owners (if different from you) and the vessel’s Master, accordingly.

LAW AND DISPUTE RESOLUTION: To the extent this agreement is not subject to the general maritime laws of the United States of America, these Terms and Conditions and all disputes between 15.

AkzoNobel and Buyer are governed by the laws of the State of Texas, excluding the United Nations Convention of Contracts for the International Sale of Goods and any choice of law rules that direct the application of the law of any other jurisdiction. Any dispute between AkzoNobel and Buyer that the parties are unable to resolve by agreement will be resolved exclusively in the courts havin g jurisdiction over the subject matter of the dispute located in Houston, Texas. Each party consents and agrees to the jurisdiction and venue of such courts.

NOTICE: All notices, request, demands or other communications to or upon the AkzoNobel shall be made in writing to the following address: 6001 Antoine Drive, Houston, Texas, Attn: Commercial 16.

Department.

Interspec

Marine Coatings Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our standard terms and conditions of sale.

Please note that a surcharge may be applied to the prices listed, in which case this will be notified to you by your International Paint representative. In the event that supplies are made and technical advice is given by one of our associated companies then such supplies and technical advice shall be subject to the standard terms of sale of that company, a copy of which is available upon request

JCUS01-3RT8-7W4X/1

07-Jan-2026