www.kingspanpanels.us www.kingspanpanels.ca

Manufacturer Qualification

Fact sheet

History

Listings Kingspan is quoted on the Irish Stock Exchanges (Symbol: KSP:ISE)

Employees Over 5,500 people are employed by Kingspan world‐wide, including approximately 3,000 people in an operational or technical capacity.

Head office and registered office

Kingspan Group Plc Dublin Road, Kingscourt,Co. Cavan. Ireland.

Tel: +353 (0) 42 9698000 Fax: +353 (0) 42 9667501

North American Offices

Kingspan Insulated Panels

Kingspan Benchmark 2000 Morgan Road 726 Summerhill Drive 720 Marion Road Modesto, CA 95358, USA Deland, FL 32724, USA Columbus, OH 43207, USA Tel: +1 800 377 5110 Fax: +1 209 531 9099 Tel: +1 877 638 3266 Fax: +! 386 626 6884 Tel: +1 614-444-0110 Fax: +1 614-444-7759

Kingspan Insulated Panels 12577 Coleraine Drive

5202 – 272nd Street

Caledon, ON L7E 3B5, Canada Langley, BC V4W 1S3, Canada Tel +1 905-951-5600 Fax +1 905-951-3944 Tel +1 604-607-1101 Fax +1 604-607-1142

Mansfield ANG Building 403 - Mansfield, OH - KS Series

L i n e 3 0 9 0 7 4 2 1 3 Q u a l i f i c a t i o n p a r a g r a p h # 1 . 5 . 3 joel Highlight

To Whom It May Concern, Kingspan is a leading manufacturer and has demonstrated a successful history of providing Insulated Metal Wall Panels and accessories for over (20) years. Kingspan is a member of the Metal Construction Association (MCA), and all materials are manufactured in conformance with MCA guidelines and tolerances.

Regards, Royce Chitty Engineer Technician Technical Services

Mansfield ANG Building 403 - Mansfield, OH - KS Series

726 Summerhill Dr., Deland, FL 32724, USA 386-626-6789 p 386-626-6887 f

2000 Morgan Rd., Modesto, CA 95358, USA 209-531-9091 p 209-531-9055 f

720 Marion Road (P.O. Box 07928) Columbus, OH 43207, USA 614-444-0110 p 614-444-7759 f

12557 Coleraine Dr., ON L7E 3B5, Canada 905-951-5600 p 905-951-3944 f

5202-272nd St., Langley, B.C. V4W 1S3, Canada 604-607-1101 p 604-607-1142 f

May 3, 2021

Mr. Tom Wills Alloyd Sheet Metal & Insulation Company 5734 Webster St.

Dayton, OH 45413

RECOGNITION LETTER

Dear Tom:

This letter is written to document our recognition of Alloyd Sheet Metal & Insulation Company’s installation of Kingspan insulated panels of similar size and scope on many projects with great success. Alloyd Sheet Metal & Insulation Company’s knowledge of Kingspan panel products and the quality installation that is always completed continuously makes for a successful project.

If any other information is required, please contact me.

Best regards, KINGSPAN INSULATED PANELS

Alex R. Detmer

Alex R. Detmer Manager Field Technical Services

Line 310 Section 074213 Qualification of Installation Contractor 1.5.4

Final 11/16 11217387.1

LIMITED WARRANTY – PANELS

(NO DOLLAR LIMITATION FOR REPAIR OR REPLACEMENT)

PROJECT: ___________________________ OWNER: ________________________

CUSTOMER: ________________________

DATE OF SHIPMENT: ___________________________

KINGSPAN JOB NO.: ___________________________

PLANT LOCATION: ___________________________

PANEL TYPE(S): ___________________________

Kingspan Insulated Panels Inc. (or Kingspan Insulated Panels Ltd. for projects located in Canada), hereinafter referred to as “Kingspan”, shall extend a limited warranty for a period of (XX) year(s) on the insulated panels furnished by Kingspan for the project referenced above subject to the following terms and conditions:

TERMS AND CONDITIONS

I. WARRANTY DESCRIPTION AND DURATION

Kingspan warrants to the owner of the building (“Owner”) that the panels covered hereunder will be free from defects in material and workmanship under normal use and service for the period noted above.

Panels, if properly installed, will not show evidence of excessive deflection or delamination under conditions within panel design limits determined by Kingspan. The warranty period commences on the date of substantial completion, or six months from date of shipment, whichever occurs first. Exterior finish coating is excluded from this limited warranty; see separate finish warranty available upon request from Kingspan. A separate weathertightness limited warranty may be available at an additional cost. This warranty does not include any matter relating to corrosion.

II. OWNER’S OBLIGATIONS

1. Owner, or its designated contractor, shall, prior to installation, inspect the material received from Kingspan, and shall forthwith notify Kingspan of any nonconformity of the material.

Installation of the material shall constitute acceptance of the material as in conformity with the material ordered.

2. Caulking and sealing materials shall be maintained and replaced as necessary as outlined in the maintenance guidelines.

Mansfield ANG Building 403 - Mansfield, OH - KS Series

Line 312 074213 Warranty Paragraph 1.8

Line 341 074213 Closeout Submittals 1.8

11217387.1

3. Owner shall periodically clean the panels to remove debris, silt and other contaminants and obstructions to flow of runoff. This cleaning shall be performed at least as frequently as outlined in the maintenance guidelines.

4. Owner must provide Kingspan free access to all panels on the subject building during normal business hours to conduct any and all investigations and repairs.

5. Any claim arising from this limited warranty for any cause whatsoever shall be deemed WAIVED by Owner unless written notice thereof is given to the Plant Manager of the Kingspan plant location listed above within the earlier of (a) thirty (30) days after discovery of claimed defect, or (b) thirty (30) days from time such defect should have been discovered after exercise of reasonable diligence, and within the warranty period. Owner’s notice shall include Kingspan’s order number, date of shipment and date of panel installation. On request, Owner must provide duly authenticated records describing the defect which were made in the ordinary course of business contemporaneously with the events noted thereon. Owner shall, on demand, present evidence that establishes any claimed defects are due to a breach of the limited warranty stated herein, and that the Owner’s obligations under the limited warranty have been fulfilled.

6. Owner must install, use and maintain the panels strictly in accordance with the instructions and recommendations contained in Kingspan’s installation and maintenance guidelines and accepted industry practices. Owner understands and agrees that Kingspan’s written instructions and recommendations contained in Kingspan’s installation and maintenance guidelines and accepted industry practices control, and that it shall not rely on any oral statements or recommendations of Kingspan personnel. Owner acknowledges that any shop drawings prepared by Kingspan are solely for the purpose of finalizing Kingspan’s bill of materials, and are not for reliance by Owner or Installer.

7. Kingspan shall be given reasonable opportunity to inspect the installation prior to Owner making or causing to be made any repairs to the panels. All repair attempts made must be pre-approved in writing by Kingspan. Owner agrees to reimburse Kingspan for all investigation costs incurred by Kingspan for claims made by Owner which are determined not to be valid hereunder. No components or materials shall be returned to Kingspan without Kingspan’s inspection and approval and receipt from Kingspan of written shipping instructions.

III. EXCLUSIVE REMEDY

1. If it is determined to Kingspan’s reasonable satisfaction, upon inspection by Kingspan, that a valid warranty claim has been made pursuant to the terms of this limited warranty, Kingspan shall, at its sole discretion, (i) provide replacements for any defective panels, (ii) repair the defective panels (subject always to such repair obligation being limited solely to the cost of material and labor), or (iii) pay to the Owner an amount equal to the price originally paid for the defective panels by Customer. The warranty period for any repaired or replaced panels shall be limited to the unexpired warranty period for the originally supplied panels.Liability under this Limited Warranty shall be limited to the actual cost of the warranty repair work, but is not limited to the original cost of the material supplied by Kingspan. Kingspan shall not be liable for claims resulting from improper or incorrect installation of Kingspan’s panels.

Kingspan’s sole liability for breach of warranty shall be as set forth in this Section III.1.

2. Should the product covered under this limited warranty be discontinued, Kingspan reserves the right to substitute a product of equal quality or price at its discretion. It is understood and

11217387.1 accepted by Owner that normal exposure to the elements may preclude a perfect color match between the original and any replacement material.

3. Owner and Customer hereby WAIVE all remedies not expressly provided herein, including, but not limited to, losses due to damage to property, any direct or indirect losses or costs, or incidental or consequential damages for loss of use, loss of revenue or loss of profit. Such waiver shall apply even if Kingspan has been advised of the possibility of such claims, losses or damages.

IV. WARRANTY LIMITATIONS

1. THE WARRANTY ISSUED TO OWNER HEREUNDER IS EXCLUSIVE AND IN LIEU

OF ANY AND ALL OTHER WARRANTIES, CONDITIONS, RIGHTS OR REMEDIES,

EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE TO OWNER OR CUSTOMER,

INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE AND THE CONDITION OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. KINGSPAN HEREBY DISCLAIMS, AND

OWNER AND CUSTOMER HEREBY WAIVE, ANY LIABILITY OF KINGSPAN IN

CONTRACT OR TORT, STRICT OR OTHERWISE, OR UNDER ANY STATUTE FOR

DAMAGES, DIRECT OR CONSEQUENTIAL, RESULTING FROM A DEFECT IN

DESIGN, MATERIAL, WORKMANSHIP, OR MANUFACTURE, WHETHER OR NOT

OCCASIONED BY KINGSPAN’S NEGLIGENCE.

2. This limited panel warranty will be null and void if one or more of the following conditions exist, whether or not such conditions result from or are occasioned by the negligence or fault of any other party:

a. Failure of Owner to fulfill his obligations as set forth in Section II above.

b. Improper installation, including but not limited to non-compliance with information set forth in current Kingspan installation guidelines, Kingspan shop drawings or Kingspan approved shop drawings, non-conformance to SMACNA principles for sheet metal practices, facing or changing the factory finished color by any means such as adhering a membrane to the facing, or installation of panels with any accessories or by any means not approved in writing by Kingspan.

c. Alterations made to the panels without prior authorization from Kingspan, including but not limited to, structures, fixtures, or utilities being placed upon or attached to the panels, or attachments of signs, the installation of vents or manual perforations or penetrations such as skylights or solar panels or the addition or relocation of curb units, smoke hatches, HVAC units, electrical or pip penetrations or ventilators.

d. Damage caused by settlement, expansion or deflection of structural load-bearing members or movement of roof, walls, steel frame or secondary structural members of building systems or equipment including building foundations, or vibrating, reciprocating or rotating machinery.

e. Damage resulting from natural or man-made disasters such as tornadoes, hurricanes, hail, floods, cyclones, sand storms, earthquakes, lightning, fire, acts of war, vandalism or terrorism, or other force majeure events.

11217387.1

f. Damage resulting from acts of negligence including but not limited to improper storage, shipping and/or handling, accident or misuse, aggressive cleaning products or methods, etc.

g. Damage resulting from falling objects, projectiles, however propelled, foot traffic, recreational activities, or storage of material of any kind in contact with the panels or other improper use of the panels.

h. Changes in building usage or utilization without prior written consent of Kingspan.

i. Standing water (ponding or pooling) or inadequately sealed overlaps allowing retention of water or other contaminants.

j. Corrosion of any sort, including corrosion resulting from drainage, roof top equipment, leaky gutters, exposure to marine (salt water) atmosphere, atmospheric contaminants or contaminants generated inside the building, including moisture build-up due to inadequate or poor ventilation of interior. The fact that contaminants may not have been identified or existent at time of installation shall not obligate Kingspan under the provisions of this limited warranty.

k. Movement or deterioration of metal components and/or dissimilar metals in direct contact with or adjacent to the panels unless such components are an integral part of the panel system and have been approved or designated by Kingspan in writing as a part of the panel system purchased, or deterioration caused by contact with wet, green or treated lumber or due to direct or indirect contact with corrosive materials.

l. Failure of any materials, assemblies or components furnished by others whether or not identified to Kingspan at the time of entry into the contract with Customer for the sale of panels.

m. Fair wear and tear, misuse, willful damage, negligence, abnormal working conditions, default or breach of any statutory duty by Owner or its contractors, failure to follow Kingspan’s instructions, or misuse of the panels.

n. Any change in the atmospheric conditions at the site where the Project is located from those conditions notified to Kingspan on the date of Kingspan’s entry into the contract with Customer for the panels, or any atmospheric conditions not in compliance with the established air quality standards set forth in the U.S. Clean Air Act or any and all other applicable laws of any federal, provincial, state, municipal or local governmental body.

o. Repairs or attempted repairs by persons other than Kingspan or its appointed agents, or the occurrence of any events which are commonly covered by a building insurance policy.

p. Exposure to continuous temperatures howsoever caused greater than 180ºF / 82ºC.

q. The performance of any touch-up paint or overpaint used on the panels before, during or after erection.

r. The panels being in direct contact with, or run off from, materials with advance corrosion.

11217387.1

s. The panels being removed and/or installed in a different location after the original installation.

3. The Owner’s rights, and entitlement to bring a claim or otherwise make recovery under this limited warranty (and Kingspan’s liability) shall be subject to the Customer, the Customer’s sub-contractors and the Owner (including Owner’s agents and representatives) having followed Kingspan’s technical documents in all respects, but particularly in relation to design loads, supporting spans, fastener spacing and type, detail installation design and fixing.

Where not covered by Kingspan’s latest published product literature, then such parties shall have followed best practice and all reasonable skill and care have been employed.

4. The limited warranty is given by Kingspan in reliance upon and upon condition of the accuracy of the information provided by the Customer and/or Owner. Any inaccuracy in such information provided by the Customer and/or Owner shall result in Kingspan ceasing to be liable or having any responsibility under this limited warranty and the Owner shall not be entitled to make a claim and/or recovery or otherwise commence any legal action against Kingspan under or in connection with this limited warranty.

5. Kingspan shall have no liability under this limited warranty if a defect or fault in the panels results from any drawing, design or specification supplied by the Customer or Owner or a failure to comply with Kingspan’s design guidelines issued from time to time.

6. The internal and external environmental conditions prevailing at the time of installation of the goods are deemed “designed for” and then only when full and accurate audited information is available to Kingspan. Kingspan will not be liable for any defect or failure which may occur to the panels due to change of building usage or variations in atmospheric conditions.

7. Gutter assemblies (gutter components) of any kind are excluded from this limited warranty.

V. TRANSFERS, ASSIGNMENTS AND REPRESENTATIONS

1. This Limited Warranty is extended to the above named Owner only and is non-transferable and assignable only to future owners of the Project on which the panels have been originally installed, subject, in all instances, to the terms of this Limited Warranty including the conditions and limitations hereof.

VI. TERMINATION

1. Kingspan reserves the right to terminate this Limited Warranty except with respect to orders which it has already accepted, upon giving of written notice thereof.

VII. ENTIRE AGREEMENT/MERGER

1. Oral statements made by Kingspan’s representatives and written descriptions of the products appearing elsewhere than in this Limited Warranty are not warranties and shall not be relied upon by Owner. This writing constitutes the final, complete and exclusive expression of the terms of the parties’ agreement. Any modifications hereof, to be effective, shall be in writing, shall expressly refer to this Limited Warranty, and shall be signed by an authorized representative of Kingspan.

2. Kingspan will not participate in any claims or pay any claims until the full contract price for all work performed and materials furnished is received by Kingspan, unless the claim of an

11217387.1 alleged failure of the warranted product is made prior to completion of the installation. This requirement also includes payment to Kingspan for the additional cost of this Limited Warranty, if any. Kingspan’s obligations under this Limited Warranty are conditioned on compliance with all of the terms of the contract of sale between Kingspan and Customer, including the terms of this Limited Warranty.

3. Kingspan’s failure at any time to enforce any of the terms and / or conditions stated herein shall not be construed to be a waiver of those provisions.

4. In the event of a material breach by the Owner of any of the conditions of this Limited Warranty, Kingspan shall have no liability for any panel failure claims.

5. The laws of the state of Florida shall govern the construction, interpretation and performance of this limited warranty, except for projects located in Canada which shall be governed by the laws of the Province of Ontario in each case without regard to the laws of such jurisdiction relating to conflicts of laws. In the event that any provision shall be deemed illegal, unenforceable or null and void, all remaining provisions shall remain in effect. Any controversy or dispute arising out of or related to this Limited Warranty shall be addressed and resolved in accordance with the process set forth in Kingspan’s Sales Terms and Conditions (U.S.) available at [URL] (the “Sales Terms”).

6. In case any one or more of the provisions or parts of a provision contained herein are, for any reason, held to be invalid, illegal or unenforceable in any respect in any jurisdiction, such invalidity, illegality or unenforceability will not affect any other provision or part of a provision hereof or any other jurisdiction, but this Limited Warranty will be reformed and construed in any such jurisdiction as if such invalid or illegal or unenforceable provision or part of a provision had never been contained herein and such provision or part will be reformed so that it would be valid, legal and enforceable to the maximum extent permitted in such jurisdiction.

7. The parties acknowledge that they have requested that this Limited Warranty and all documents relating hereto be drawn up in the English language, and the English language shall prevail. Les parties reconnaissent qu'elles ont exigés que les présentes conditions de ventes et tous documents qui y sont afférents soient rédigés en langue anglaise et le langue anglaise prédominera.

8. This Limited Warranty is issued pursuant to, and in connection with, the Sales Terms, and, except to the extent, if any, that this Limited Warranty directly conflicts with the Sales Terms, this limited warranty is subject to all applicable provisions of the Sales Terms. In the case of a direct conflict, the provisions of this Limited Warranty shall control with respect to such Limited Warranty only.

WARRANTY RESPONSIBILITY

Date of Issuance: ______________________

Kingspan Insulated Panels

By:

Title:

726 Summerhill Dr., Deland, FL 32724, USA 386-626-6789 p 386-626-6887 f 2000 Morgan Rd., Modesto, CA 95358, USA 209-531-9091 p 209-531-9055 f

720 Marion Road (P.O. Box 07928) Columbus, OH 43207, USA 614-444-0110 p 614-444-7759 f 12557 Coleraine Dr., ON L7E 3B5, Canada 905-951-5600 p 905-951-3944 f

5202-272nd St., Langley, B.C. V4W 1S3, Canada 604-607-1101 p 604-607-1142 f www.kingspanpanels.us

Line 313 Section 074213 Installation Drawings Paragraph 1.5.1.1

Product Specification

Width: 24”, 30”, 36”, 42”

Thickness: 2”, 2.5”, 3”, 4”, 5”, 6”

Length: 8’ - 53’

Orientation: Vertical or horizontal

Applications Shadowline high performance wall systems deliver an attractive and affordable panel choice. Shadowline panels, horizontally or vertically applied, use a patented double seal integrated joint. Standard reveals are 1/8” for vertical applications, and 3/8” for horizontal applications.

Shadowline panels are suitable for new and retrofit applications across the cold storage, commercial and industrial market sectors.

Design Features The foamed-in-place manufacturing process produces superior panels of consistent high quality that arrive to site ready for quick and easy installation, saving up to 50% in on-site construction time.

Panels are available with optional factory-caulked side joints to save erection labor (not available for cold storage applications).

Customer Options Kingspan offers a full spectrum of vibrant colors for every color scheme. The high performance coatings provide long-life protection, color and gloss retention. Custom color matching is available to meet individual building designs and creative freedom.

24” - 42”

Shadowline

Shadowline

Interior face

Exterior face

2” -6

KS Shadowline Data Sheet Insulated Wall Panel System

Kingspan’s single component systems can increase speed of build by up to 50%

Line 315 Section 074213 Product Data

Pat Szempruch Highlight

Pat Szempruch Highlight

Pat Szempruch Highlight

Pat Szempruch Highlight

Pat Szempruch Highlight

ASTM E84 Flame Spread: 25 or Less / Smoke Developed: 450 or Less

CAN/ULC-S101 Fire Endurance Tests: 10 min and 15 min stayed in place

CAN/ULC-S102 Flame Spread: 5 / Smoke developed: 135 for panel with facings

CAN/ULC-S127 Flame Spread: <500 for foam core

CAN/ULC-S134 Passed: Standard method of test for fire of exterior wall assemblies

NFPA 259 Tested for potential heat of building materials

Structural FM-4881 Passed: Class +110/-154 Zone H Class +100/-140 Zone HM – LM

ASTM E72 Vacuum chamber tested. Panel load / span and deflection tables are available

Thermal ASTM C518 Transmission

Air Infiltration ASTM E283 0.003 CFM/ft2 of Panel Area at 6.24 psf

Water ASTM E331 No uncontrolled water penetration at 20 psf differential pressure

AAMA 501.1 Dynamic water pressure testing – no sign of water leakage at 15 psf

Bond Strength ASTM D1623 Panels tested for tensile bond strength of metal to foam

Sample placed in an autoclave device and pressurized to 2 PSI at 212°F for 21/2 hours

Skin Delamination No skin delamination with direct pull off pressure up to 1188 psf

Performance Testing and Approvals Kingspan insulated panels meet specific building envelope performance criteria and requirements stipulated by US and Canadian building codes.

Panels are tested in accordance with UL, ULC, FM and ASTM approval standards, testing methods and procedures. Kingspan insulated panels are listed by FM Global and Warnock Hersey.

KS Shadowline Data Sheet Insulated Wall Panel System

Issue 4: 10/2019

Thermal Performance at 75˚ Thickness U-Factor R-Value

2 0.07 14.4

2.5 0.06 18.0 3 0.05 21.6 4 0.03 28.8 5 0.03 36.0 6 0.02 43.2

Thermal Performance at 35˚ Thickness U-Factor R-Value

2 0.06 16

2.5 0.05 20 3 0.04 24 4 0.03 32 5 0.03 40 6 0.02 48

Kingspan North America DeLand, FL: 386-626-6789 Modesto, CA: 209-531-9091 www.kingspanpanels.us

Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading.

Suggestions for, or description of, the end use or application of products or methods of working are for information only and Kingspan Limited and its subsidiaries accept no liability in respect thereof.

Caledon, ON: 905-951-5600 Langley, BC: 604-607-1101 www.kingspanpanels.ca

For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com

Pat Szempruch Highlight

Pat Szempruch

Fluropon Low-Gloss A low gloss finish is a unique exterior finish that gives your building a distinctively matte appearance.

Fluropon Low-Sheen A low sheen coating gives you a flat or “satin” finish. This two-coat system will make your project stand out.

Fluropon Premiere Need to make a statement with bold and bright colors? This three-coat system is designed to bring out depth and beauty of bright pigments with a clear coat for added protection.

Fluropon Solar-Reflective (SR) Fluropon SR contains solar-reflective pigments, offering durability that resists heat absorption and aids in structure cooling. We have thousands of SR’s energy efficiency coatings that meet ENERGY STAR®, LEED® and CRRC performance requirements.

Fluropon Effects Fluropon Effects transform the concept of color with innovative new palettes that have never before been achieved in 70% PVDF coating systems. These two- to three-coat systems create unique, mesmerizing effects. Kameleon creates an eye-catching color shift; Nova offers an intense sparkle; and Rustica features a nature-inspired color palette.

Fluropon Our flagship coating. Its excellent performance is a direct result of Sherwin-Williams' innovative technology—a two-coat fluoropolymer formulation that continually exceeds performance needs while maintaining its color and durability long into the future.

Fluropon Classic II When a sparkle appearance is desired, this two-coat fluoropolymer system utilizes mica-based pigmentation to deliver a subtle or bold metallic appearance without the need for a clear coat.

Fluropon Classic Take vibrancy to a new performance level with a special metallic effect color coat and a clear coat for added shine and protection, making this three-coat system gleam.

FLUROPON® 70% PVDF COATINGS

FROM SHERWIN-WILLIAMS

Sherwin-Williams® is chosen more often than any other brands of PVDF-based coatings. For PVDF exterior metal coatings systems, none is more trusted than our premium Fluropon coatings, which are fluoropolymer, containing 70% polyvinylidene difluoride (PVDF) resins. Field- and time- proven, they meet or exceed the most rigorous ASTM performance standards.

KEEP YOUR PROJECT LOOKING BEAUTIFUL

The long-lasting beauty of your project goes hand in hand with its durability.

FLUROPON® 70% PVDF

COIL COATING SYSTEMS

Mansfield ANG Building 403 - Mansfield, OH - KS Series

Line 316 Section 074213 Facyory Color Finish 2.2.1

Line 332 and 333 Section 074213 Coatings and caulking 2.2.1.2

FLUROPON®

TWO-COAT SYSTEM

Fluropon, Classic II, Low Gloss, Low Sheen and Solar Reflective (SR)

Topcoat

Pretreated Aluminum Backer

Primer

FLUROPON®

THREE-COAT SYSTEM

Classic and Premiere

Topcoat

Backer

Clear Coat

Pretreated Substrate Primer

Key Characteristics

Number of

Coats

Dry Film Thickness (DFT)

Total Topside

DFT:

Specular Gloss 60°

COATING

SYSTEM

Primer Top Coat

Clear Coat

Fluropon® Effects Coat

Backer +/-5 units of manufacturer's specification

FLUROPON® Solid Colors 2-Coat 0.2–0.3 mils

0.7-0.8 mils — 0.9-1.1 mils 0.3-0.4 mils 20-35

FLUROPON®

CLASSIC II

Metallic Utilizing Mica-Based

Pigmentation 2-Coat 0.2-0.3 mils 0.7-0.8 mils — 0.9-1.1 mils

0.3-0.4 mils 15-30

FLUROPON

CLASSIC

Metallic Utilizing Aluminum-Based

Pigmentation 3-Coat 0.2–0.3 mils 0.7-0.8 mils 0.4-0.5 mils 1.3-1.7 mils

0.3-0.4 mils 25-40

FLUROPON

PREMIERE

Bright, Vibrant Colors 3-Coat 0.2–0.3 mils 0.7-0.8 mils 0.4-0.5 mils 1.3-1.6 mils

0.3-0.4 mils 25-40

LOW-

GLOSS

Matte

Finish 2-Coat 0.2–0.3 mils 0.7-0.8 mils — 0.9-1.1 mils

0.3-0.4 mils 8-15

LOW-

SHEEN

Flat or "Satin" Finish 2-Coat 0.2–0.3 mils 0.7-0.8 mils — 0.9-1.1 mils

0.3-0.4 mils

10º maximum

SOLAR

REFLECTIVE

(SR)

Solar-reflective pigments 2-Coat 0.2–0.3 mils 0.7-0.8 mils — 0.9-1.1 mils

0.3-0.4 mils 20-35

FLUROPON®

EFFECTS

RUSTICA

Saturated Metallic

Color Collection

2-Coat 3-Coat

0.2-0.3 mils

0.7-0.8 mils

0.9-1.1 mils

0.3-0.4 mils 15-30

FLUROPON®

EFFECTS

NOVA

High-Intensity Sparkle 3-Coat 0.2-0.3 mils 0.7-0.8 mils 0.8-0.9 mils 1.7-2.1 mils

0.3-0.4 mils 40-60

FLUROPON®

EFFECTS

KAMELEON

Color-Shifting 3-Coat 0.2-0.3 mils

0.5-0.6 mils

0.8-0.9 mils

1.5-1.9 mils

0.3-0.4 mils 30-60

COMMITMENT TO QUALITY

Our coatings are trusted and field-proven through rigorous testing, providing key benefits to our customers.

Fluropon® is a registered trademark of The Sherwin-Williams Corporation. For details and health, safety and handling information, Material Safety Data Sheets (MSDS) are available at coil.sherwin.com.

Sherwin-Williams makes no warranties, expressed or implied, and disclaimers all implied warranties including warranties of merchantability or fitness for a particular use. Sherwin-Williams will not be liable for any special, incidental or consequential damages. © 2018 Sherwin-Williams. All Rights Reserved.

Mansfield ANG Building 403 - Mansfield, OH - KS Series coil.sherwin.com or call (866) 351-6900

SUBSTRATES

Fluropon coatings may be applied to a number of pretreated substrates including: Galvalume®, Hot-Dipped Galvanized (HDG) steel and aluminum.

END USES

All Fluropon coatings are ideal for external use on monumental, commercial, residential structures and pre-engineered buildings, including:

• Architectural and residential metal roofing systems

• Composite and insulated metal wall panel systems

BENEFITS

• Superior resistance to ultraviolet rays

• Outstanding color retention and consistency

• Excellent overall adhesion

• Great flexibility and formability

• High film integrity

COLORS

Our Fluropon systems are available in a wide range of colors, sheens, gloss levels and special effects to achieve nearly any look you can dream up.

FLUROPON® 70% PVDF

COIL COATING SYSTEMS

FLUROPON PERFORMANCE TESTING

Industry Specifications Compliance

AAMA1 2605-17A Requirements Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels

Substrates Pretreated substrates: Galvalume®, Hot-Dipped Galvanized (HDG) steel and Aluminum.

ASTM2 TEST METHOD AAMA 2605-17A REQUIRED TEST RESULTPHYSICAL TESTING

Falling Sand Abrasion ASTM D 968 65 ± 10 liters

Film Adhesion ASTM D 3359 No removal of film under tape in the cross-hatched area (Dry, Wet, Boiling Water)

Surface Burning Characteristics

ASTM E 84 Flame Spread Index: Class A. Smoke Developed Index: Class A

Graffiti Resistance ASTM D 6578/D 6578M Meets and exceeds

Humidity Resistance ASTM D 2247:

100% RH at 100° F for 1,000 hours

100% RH at 100° F for 2,000 hours 100% RH at 100° F for 3,000 hours

Kamelelon: Galvalume or HDG: Rating 8, no more than a few field blisters. Rustica:

No field blisters.

Galvalume or HDG: No field blisters Aluminum: No field blisters

Impact Resistance (Direct)

ASTM D 2794

Galvalume or HDG: 3x metal thickness inch-pounds, no loss of adhesion Aluminum: 1.5x metal thickness inch-pounds, no loss of adhesion.

Pencil Hardness ASTM D 3363 Fluropon®, Classic II, Low Gloss, Low Sheen, SR, Rustica: HB to 2H Premiere, Classic , Nova, Kameleon: HB to H

Salt Spray ASTM B 117:

1,000 Hours

3,000 Hours

Fluropon, Classic II, Premiere, Low Gloss, Low Sheen, SR, Rustica, Nova, Kameleon: Galvalume or HDG: Creep from scribe ≤ 1/16" (2mm), no field blisters.

Classic: Galvalume or HDG: Creep from scribe ≤ 1/32" (1mm), no blisters.

Fluropon, Classic II, Low Gloss, Low Sheen, SR, Rustica, Nova, Kameleon:

Aluminum: Creep from scribe ≤ 1/16" (2mm), no field blisters.

Premiere, Classic: Aluminum: Creep from scribe ≤ 1/32" (1mm), no blisters.

T-Bends ASTM D 41453 T-3T, no loss of adhesion

ASTM TEST METHOD AAMA 2605-17A REQUIRED TEST RESULT

SOUTH FLORIDA

EXPOSURE TESTING

Atmosperic Environmental Exposure Testing of Non- Metallic Materials

ASTM G7 45 degree southern exposure for panel racking

Color ASTM D 2244 No more than 5 Hunter units at 20 years.

Chalk ASTM D 4214 Rating no less than 8 at 20 years. Kameleon: Rating no less than 8 at 10 years.

Film Integrity ASTM G7 25 years

Erosion Resistance ASTM D 662 10% - 15%.

1American Architectural Manufacturers Association. 2American Society for Testing and Materials. 3Fluropon is not designed to bridge cracks in the substrate. Fluropon coatings will generally meet the requirements for most post-painted fabrication processes. However, variations in metal quality, thickness or cleaning/ pretreatment applications can lead to diminished flexibility.

Mansfield ANG Building 403 - Mansfield, OH - KS Series

Pat Szempruch Highlight

SW

-C

C- 2, 1- 9-

We’ll work with you to find a solution. Want a unique color? We’ll create it for you. Need a quick turnaround?

Talk to us, and we’ll help you get your project completed on time.

WE’RE HERE TO HELP

Give us a call and see how we can help with your next project.

coil.sherwin.com coilhelp@sherwin.com

(866) 306-2645

DO YOU HAVE A

UNIQUE APPLICATION?

FLUROPON® 70% PVDF

COIL COATING SYSTEMS

Non-Skinning Butyl Sealant

1. PRODUCT DESCRIPTION

Kingspan NS Butyl Sealant is a high solids, non-drying, self-healing synthetic rubber based sealant for u s e i n reducing sound and vapor transmission, standing roof seams, wall panels, insulated metal panel and metal building construction. Provides excellent adhesion to ZINCALUME®, KYNAR500®, stainless steel, polyvinylidene fluoride, Galvalume®, Galvalume® Plus, aluminum, concrete, gypsum, wood surfaces, foam boards, plastic and fiberglass. Kingspan NS Butyl Sealant is a VOC compliant, non-drying, non-bleeding formula which remains flexible to form a long lasting resilient seal. This non-webbing formulation exhibits excellent tackiness for permanent bonding. NS Butyl Sealant contains an anti-microbial agent which inhibits the growth of mildew and bacteria. FDA regulated for food contact. USDA and CFIA accepted.

Conforms to the following specifications:

• ASTM E2140-01 Standard Test Method for Water Penetration of Metal Roof Panels by Static Water

Pressure Head

• ASTM E1646-95 (2003) Standard Test Method for Water Penetration of Exterior Metal Roof Panel

Systems by Uniform Static Air Pressure Difference

• ASTM E1680-95 (2003) Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof

Panel Systems

• AAMA 800 flexibility cold testing of -100ºF

• AAMA 809 Specifications for Non-Drying Sealants

• Federal Specification TT-C-1796A for Caulking Compounds, Metal Seam, and Wood Seam (Type I)

2. RECCOMENDATIONS FOR USE

Surface Preparation:

For reliable, repeatable and durable results, adhesives and sealants must be applied to clean, dry, sound and frost free surfaces. For high strength bonds, surface contaminants such as paints, oils, oxide films, mold release agents, dirt, and the like, must be completely removed. Remove old sealants or adhesives.

Installation:

Kingspan NS Butyl Sealant can be applied from 10-oz (300ml) cartridges or 20-oz (600ml) sausages using standard caulking guns or pneumatic dispensers (air guns). 5-gallon pails or 50-gallon drums are available for bulk applications. Some applications may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended.

Technical Data

Line 319 Section 074213 Sealants and Caulking 2.5.4.1

Clean-up:

Mineral spirits may be used.

3. TECHNICAL DATA:

Typical Properties

Color: White

Extrudability (ASTM D 2452): 40-60 sec. per 20 grams through a 0.104" orifice at 50 psi

Total Solids (ASTM C 681): 93.5 - 96.5%

VOC Content (via EPA Method 24) 3.47%

Volume Shrinkage (ASTM D 2453): Less than 10%

Weight per U.S. Gallon (ASTM D 1475): 12.90 – 13.14 lbs.

Coverage Range: 1500 lineal feet per gallon at 1/8” bead 695 lineal feet per gallon at 3/16” bead 392 lineal feet per gallon at ¼” bead

Drying Time: Non-skinning, remains permanently soft and tacky

Engageability: Sealant will engage easily to make a joint at 10ºF

Vehicle Bleedout (ASTM C772): No visible exudation of vehicle from sealant after three weeks at 158ºF (70ºC) on painted or unpainted metal surfaces

Flexibility (ASTM C 711): No loss of adhesion to -100ºF

Service Temperature Range: -100ºF to 200ºF (-70ºC to 90ºC)

Application Temperature Range: 10ºF to 120ºF (-10ºC to 50ºC)

Sag (ASTM D2202): Nil

Non-Corrosive: No darkening, etching or salt deposits on GALVALUME®, GALVALUME PLUS®, ACRYLUME®, ZINCALUME®, KYNAR 500®, aluminum, aluminized steel, or galvanized metal

Staining (ASTM D 925 Method A): Sealant will not stain a painted surface

Adhesion (ASTM C 794): Excellent adhesion to oily GALVALUME®, GALVALUME

PLUS®, ACRYLUME®, ZINCALUME®, KYNAR 500®,

aluminum, aluminized steel, or galvanized metal

Resistance to fungus/mildew growth: Will resist fungal attack and not support mildew growth

Heat aging: No loss of surface tack or adhesion

Weatherability (ASTM G 154): No cracking bleeding or loss of rubbery characteristics

Chemical Resistance: Excellent to water, ozone, water vapor, alcohols; fair to weak for acids and bases. Poor to organic solvents.

Static Water Pressure Head Test

(ASTM E-2140-01):

Sealant passes 6 inches of static water pressure head, no leakage.

Rate of Air Leakage Through Exterior Metal Roof Panel Systems (ASTM E 1680)

Sealant passes. Air infiltration @ 1.57 psf � 0.0016 cfm/ft^2 and 0.0032 cfm/lin.ft. Air infiltration @ 6.24 psf � 0.0037 cfm/ft^2 and 0.0073 cfm/lin.ft

Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference (ASTM E 1646):

Sealant passed. No water leakage.

Wet Flammability (ASTM D 56): 158 ºF flash point

Toxicity: Contains no carcinogenic ingredients. Dispose in accordance with local regulations. Meets FDA, USDA and

CFIA.

4. STORAGE LIFE

For maximum shelf-life, store unopened product between 32ºF and 90ºF. Shelf life is 18 months minimum in unopened containers.

5. PRECAUTIONARY INFORMATION

CAUTION: COMBUSTIBLE LIQUID & VAPOR. Contains mineral spirits. Keep away from heat and flame. Avoid skin contact. Wash thoroughly after handling. Avoid breathing vapor. Use with adequate ventilation. Do not take internally. See MSDS for additional information. Keep out of reach of children.

6. LIMITED WARRANTY

Any goods prove defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product’s use, handling and storage.

MR150

TRANSLUCENT

MR101

BLUE WHITE

MR100

WHITE

MR105

ANTIQUE WHITE

MR3401

EGGSHELL

MR146

STONE

MR3461

ALMOND

MR191

SANDSTONE

MR3482

SAND

MR3404

WHEAT

MR3333

SIERRA TAN

MR3201

COPPERTONE

MR157

COPPER

MR184

TERRACOTTA

MR182

RED

MR180

BRANDYWINE

MR196

REGAL RED

MR171

REGAL BLUE

MR3801

PACIFIC BLUE

MR3510

WEATHERED ZINC

MR197

PATINA GREEN

MR3702

HEMLOCK GREEN

MR169

GREEN

MR168

HARTFORD GREEN

MR115

LIGHT GRAY

MR3514

GUTTER GRAY

MR4103

SILVER METALLIC

MR156

SILVER

MR118

SLATE GRAY

MR3421

CHAMPAGNE METALLIC

MR155

CHAMPAGNE

MR117

GUNMETAL GRAY

MR134

MEDIUM BRONZE

MR137

BROWN

MR131

CHOCOLATE BROWN

MR120

DARK BRONZE

MR121

LINCOLN BRONZE

MR126

CHARCOAL GRAY

MR194

EXTERIOR BRONZE

MR110

BLACK

Made in USA. Professional Grade.

Metal Roof Adhesive Sealant

• Neutral cure silicone

• Excellent adhesion

• Permanently flexible

• Extrudes to -20°F

• Adheres to:

- Metals

- Wood

- Masonry

- PVC/PVDF

- Common Construction Materials

• Also used as

- Gutter Sealant

- Chimney Flashing

- Snow Guard

- Pipe Boots

Visit novagard.com/color-match-product/metal-roof/ for our metal roof manufacturer color cross reference tool.

Section 319 Section 074213 Sealants and Caulking 2.5.4.1 Used where caulking is exposed https://www.novagard.com/novaflex/metal-roof-sealants/ http://novagard.com/color-match-product/metal-roof/

Effective Date: Aug 2020-v2.6

NovaFlex is proudly made in Cleveland, OH

Permanently Flexible

Interior and Exterior Applications

• Completely cured within 48 hours

Easily Gunned at all Temperatures

• Weatherproof plastic cartridges • Excellent tooling properties with removable tips

VOC Compliant in all 50 States (Green Building Compliant)

• Low odor • Solvent free

AAMA Verified for Window Installs

• Will not freeze • 18 month shelf life

• Available in all major siding, trim coil, window, and metal roof manufacturer colors

Professional Grade

Product Specifications

Typical Properties*

Metal Roof Adhesive Sealant

5109 Hamilton Avenue, Cleveland, OH 44114 USA

(216) 881-8111 | (800) 380-0138 | (216) 881-6977 F novagard.com

S I L I C O N E | H Y B R I D S | F O A M

ISO 9001:2015 QMS (with Design) , IATF 16949:2016 QMS (with Design) Certified Women’s Business Enterprise

Certified Woman Owned Small Business

Physical Property Test Method Performance Range Type I - Class 35

Performance Range Type II - Class 50

Appearance Paste (Various Colors) Paste (Various Colors)

Viscosity Brookfield #7 @ 10 rpm 3,500-7,000 poises 4,500-8,000 poises

Extrusion Rate 1/8" Orifice @ 50 psi 30 - 80 grams/minute 30 - 80 grams/minute

Skin Over Time 3/8" @ 50% RH & 77°F 5 - 10 minutes 5 - 10 minutes

Through Cure 3/8" @ 50% RH & 77°F 48 hours (14 days for OEM window applications)

48 hours (14 days for OEM window applications)

Physical Property Test Method Typical Value Type I - Class 35

Typical Value Type II - Class 50

Specific Gravity 1.00 - 1.05 1.15 - 1.25

Tensile Strength ASTM D412 140 - 200 psi 170 - 220 psi

Elongation ASTM D412 500 - 650% 800 - 1000%

Tear Resistance ASTM D624 30 - 35 pli 30 - 35 pli

Shore Hardness ASTM D2240 20 +/- 5 25 +/- 5

Service Temperature

- 40°F to 400°F (- 40°C to 204°C)

- 40°F to 400°F (- 40°C to 204°C)

Joint Sealant Designation ASTM C920

Type S Grade NS Class 35

Use NT, M, G, A, O

Type S Grade NS Class 50

Use NT, M, G, A, O

Adhesion Glass Aluminum Vinyl

ASTM D903 12 - 15 pli 10 - 14 pli 12 - 15 pli

12 - 15 pli 10 - 14 pli 12 - 15 pli

*The values outlined reflect testing that was conducted under laboratory conditions, actual results may vary. The information provided in the above table is not intended for use in preparing specifications. Please consult manufacturer for additional information.