ATTACHMENT 07_B403 Cyber_Interior Design Specs and Drawings_B3.pdf

T Y P E B - 3 F I N A L

Repair B403 for Cyber Contract No. PBXP222050

Comprehensive Interior Design

Prepared for

179th Civil Engineering Squadron

Ohio Air National Guard

Mansfield Lahm ANG Base, OH

May 2026

Jacobs Government Services Company

2600 Michelson Drive, Suite 500

Irvine, CA 92612

TABLE OF CONTENTS

PROJECT: REPAIR B403 FOR CYBER

MANSFIELD LAHM AIR NATIONAL GUARD BASE, OH

JACOBS PROJECT: FA877006

DESIGNER OF RECORD: MICKEY WARRINER

JACOBS

STRUCTURAL INTERIOR DESIGN

Design Narrative Tab 1

Finish Plans Tab 2

Elevations and Details Tab 3

Finish Material Legend/ Room Finish Schedule Tab 4

Signage Plans Tab 5

Signage Schedule and Details Tab 6

***REMOVED*** Tab 7

Reflected Ceiling Plans Tab 8

Interior Color/Sample Boards Tab 9

Tab 1

May 2026

JACOBS 2

• UFC 3-110-03 Roofing

• UFC 3-201-01 Civil Engineering

• UFC 3-210-10 Low Impact Development

• UFC 3-250-04 Standard Practice for Concrete Pavements

• UFC 3-301-01 Structural Engineering

• UFC 3-400-02 Design Engineering Weather Data

• UFC 3-401-01 Mechanical Engineering

• UFC 3-410-01 Heating, Ventilating, and Air Conditioning Systems

• UFC 3-410-02 Direct Digital Control for HVAC and Other Building Control Systems

• UFC 3-420-01 Plumbing Systems

• UFC 3-501-01 Electrical Engineering

• UFC 3-520-01 Interior Electrical Systems

• UFC 3-530-01 Interior and Exterior Lighting Systems

• UFC 3-575-01 Lightning and Static Electricity Protection Systems

• UFC 3-580-01 Information and Communications Technology Infrastructure Planning and Design

• UFC 3-600-01 Fire Protection Engineering for Facilities

• UFC 3-740-05 Construction Cost Estimating

• UFC 4-010-01 DoD Minimum Antiterrorism Standards for Buildings

• UFC 4-010-05 Secure Area Planning, Design, and Construction

• UFC 4-010-06 Cybersecurity of Facility-Related Control Systems

• UFC 4-021-01 Design and O&M: Mass Notification System

2.3 General Codes & Standards

• International Building Code (IBC)

• ANSI Z359.18-2017 Safety Requirements for Anchorage Connectors for Active Fall Protection Systems

• Architectural Barriers Act (ABA) Standards

6.0 Architectural Design

6.1 Design Concept

The project will utilize the existing CMU structure to accommodate the required program spaces. The spaces consist of an Entry Vestibule to access the building. Other spaces include an Open Office, three Offices, Break Area, Shred/Print, Conference Room, three Labs, and Telecommunications Entrance

JACOBS 3

Facility (TEF) and Men’s and Women’s Restrooms. The Electrical room and Fire Riser room are accessed from the exterior of the building. The Lab spaces are specialized rooms what will house workbenches, computer and server racks. The TEF will function and the primary entry point for Telecommunications as well as housing the main servers for the facility.

6.2 Occupancy

The building’s primary occupancy will not change as part of this scope of work. The existing building is assumed to have a Business (B) occupancy classification.

6.3 Means of Egress

The occupancy count for the facility will be over 50 occupants but under 300 occupants, which will require a minimum of two means of egress for the facility. The primary entrance and an additional alarmed exit only egress door is provided for the facility. Since the facility will be sprinklered the two exits will be at least one third the length of the maximum overall diagonal dimensions of the buildings.

6.4 Construction Type

The construction type for this facility is Type II-B per the International Building Code and Type II (0,0,0) per NFPA 101.

6.5 Building Shell

The proposed exterior design for the alteration will match the look and feel of the existing structure as well as comply with the base design standards.

Exterior Walls

The existing exterior is comprised of 8-inch CMU block with exterior metal panels and brick veneer.

Where doors or windows are to be infilled, the openings will be infilled with CMU and then covered with metal panel and brick veneer to make a cohesive exterior envelope. On the interior side of the walls insulation board will be provided to meet ASHRAE 90.1 requirements for exterior envelope. Existing

CMU block that is exposed will be painted.

Doors and Windows

Exterior doors at secure areas will be painted hollow metal doors and frames and will be RF Shielding and STC-50 rated for acoustics were required by code. Doors at non-secured areas will meets the STC ratings required per UFC and be painted hollow metal doors and frames.

No windows will be provided for the facility.

Roof

The existing roofing system is a single-ply membrane over insulation board to provide an R value of 40.

The existing roofing system will remain in place with minor modifications to the roof to accommodate mechanical and plumbing equipment and penetrations. Any existing equipment that will be removed from the roof, those areas will be patched to match the existing assembly. Where existing roof drains are to remain the interior drain lines will be furred out to meet the secure wall requirements. Existing gutters and downspouts will remain as-is.

JACOBS 4

6.6 Partitions

All interior construction consists of painted gypsum wall board on metal studs. Walls will be designed to meet applicable STC ratings for their associated spaces as required per the UFC. Sound attenuation insulation will be provided within all partitions to reduce noise transmittance. Restrooms are to receive cement backer board for installation of wall tiles.

Acoustical Requirements will be taken into consideration for the facility. The facility will be designed to meet STC-50.

6.7 Ceilings

Ceiling finishes are selected to address acoustical, maintenance, moisture, and impact resistance of the room they are serving. Where ceilings are required to be open, suspended acoustic baffles or other architecturally pleasing cloud type systems will be provided. At open ceilings, all interior components above the assumed ceiling height will be painted white. A STC-50 ceiling assembly will be provided at the underside of the roof structure. Ceilings in restrooms will be fiber reinforced water-resistant gypsum board with latex paint. Access panels will be provided in hard lid ceiling systems to allow for the inspection of secure spaces above.

6.8 Special Construction

Secured Areas

The building is broken up into two distinct security levels. Those levels are defined at Controlled

Perimeter A and Controlled Perimeter B. Both Secure Zones must comply with secure area requirements.

No windows are allowed in the Secure Area.

Security measures for the facility must be provided via the keypad entry system, the ICIDS (Internal

Commercial Intrusion Detection System) and security cameras with visual display within the space. The

Secure area must be protected by measures identified in secure area requirements. Perimeter walls must be protected by Type A walls as prescribed by ICD/ICS 705 (Wall Type D and E in the drawings) with a sound class 4 acoustic rating (STC 50). All walls that are required to meet an STC 50 rating when tested will be designed higher to ensure that the walls will pass testing. Walls within the Controlled Area that are not perimeter walls must match the same sound class rating so that the space as a whole meets the required acoustic rating.

Entry must be controlled at a single entry and exit point. Secure area perimeters and the penetrations in those perimeters are the primary focus of the design. Secure area requirements provide the minimum and enhanced construction requirements for secure perimeter and area with regard to forced entry, covert entry, visual evidence of surreptitious penetration, and sound attenuation.

The Secure Zone level perimeter consists of:

• Type A walls as prescribed by ICD/ICS 705 (Wall Type D and E in the drawings) with a sound class

4 acoustic rating (STC 50) with RF mitigation measures. RF Mitigation is to consist of shielding measures to all walls, ceilings, floors, and doors per UFC 4-010-05 paragraph 3-5.15.2 using a single layer of approved Ultra Radiant R-Foil. Foil must be installed between the first and second layers of GWB. The first layer of foil backed drywall must face into the space served and must be electromagnetic-tape-shielded seams and to the metal roof/ceiling pan, the slab/floor material and to the metal door frames. Foil must be bonded to the buildings electrical ground. Walls will

JACOBS 5

be designed 3 to 5 points higher to ensure when tested the walls will meet the required STC 50 rating.

• Doors must be standard metal STC 50 rated doors with magnetic door seals and RF gasket.

Perimeter metallic pipe and conduit penetrations must incorporate non-metallic dielectric unions and grounding only where the non-metallic couplings are not possible. Emergency notification systems that are outside the controlled perimeter, must be approved by the

Accrediting Officer. If approve the system must incorporate high gain buffer amplifiers or electronic isolation filters installed where they penetrate the rooms. Doors will be designed 3 to

5 point higher to ensure when tested the door assembly will meet the required STC 50 rating.

6.9 Accessibility

The building will be brought up to current ABA standards for accessibility.

The door and ramp at the Telecommunications Entrance Facility (TEF) is designed to meet ABA compliance however it is not intended for this area to be an accessible form of egress. The ramp and door are used for moving of servers and other equipment only.

7.0 Interior Design

7.1 Paint and Colors

The walls will be painted white with an accent walls at the open office area provided to bring interest to the space. Restroom and Janitor ceilings will be painted white with latex paint in a scrubbable finish.

7.2 Flooring

The flooring in break room, circulation and open office areas is raised access floor with luxury vinyl tile

(LVT) in a wood aesthetic.

The flooring in conference rooms is raised access floor with carpet tile (CPT).

The labs and telecommunication spaces will be provided with raised access floor with electrostatic dissipative flooring.

The flooring in restrooms is porcelain tile in a wood aesthetic.

All locations will receive wall base that is applicable to the adjacent surface material used.

7.3 Ceilings

The conference room and office ceilings will have acoustic baffles and painted exposed ceilings are to be colored black above.

The lab spaces will have suspended acoustic ceiling clouds and painted exposed ceilings are to be black above.

The open office and break room has painted exposed ceiling are to be black above.

Toilet rooms will have white moisture resistant epoxy painted ceilings.

7.4 Signage

Interior signage will be provided and will follow the bases standard for signage.

JACOBS 6

7.5 Furniture

Furniture is shown for coordination and space planning purposes only.

All FF&E is a bid option and will be contractor furnished contractor installed (CFCI) as an option to the contract unless noted as government furnished government installed (GFGI).

7.6 Finishes

Full height porcelain tile will be provided at the restrooms. Solid surface countertops at the break area will be provided with a full height backsplash to the underside of wall cabinets and as indicated on drawings. The cabinets will be plastic laminate in a wood visual aesthetic.

Tab 2

A. WHERE COLOR IS SHOWN AS BEING SPECIFIC TO ONE MANUFACTURER AN

EQUIVALENT COLOR BY ANOTHER MANUFACTURER MAY BE SUBMITTED FOR

APPROVAL. MANUFACTURERES AND MATERIALS SPECIFIED ARE NOT

INTENDED TO LIMIT THE SELECTIONS OF EQUAL COLOR FROM OTHER

MANUFACURERS. PAINT COLOR SELECTIONS ARE BASE STANDARD AND MUST

BE REVIEWED AND APPROVED BY BASE FACILITY MANAGER IF CHANGES ARE

REQUIRED.

B. REVIEW DOCUMENTS, VERIFY DIMENSIONS AND FIELD CONDITIONS, AND

CONFIRM THAT WORK IS BUILDABLE AS SHOWN. REPORT ANY CONFLICT OR

OMISSIONS TO THE GOVERNMENT FOR CLARIFICATION PRIOR TO PERFORMING

ANY WORK IN QUESTION.

C. ALL FINISHES ARE TO BE INSTALLED/APPLIED IN ACCORDANCE WITH THE

MANUFACTURER'S WRITTEN INSTRUCTIONS.

D. ALL FLOORING TRANSITIONS ARE TO OCCUR IN THE CENTERLINE OF THE DOOR,

DOORWAY, OR CEILING U.O.N.

E. WHEN INSTALLING TILE, USE ALL APPLICABLE MATCHING TRIM PIECES, I.E.

INSIDE AND OUTSIDE CORNERS AND EDGES. LEAVE NO EXPOSED TILE EDGES.

F. REFER TO ROOM FINISH SCHEDULE AND FINISH MATERIAL LEGEND ON SHEET

IN601 FOR FINISH SELECTIONS IN EACH ROOM.

G. FLOORING MATERIAL / FINISH SPECIFIED FOR EACH AREA MUST EXTEND

UNDERNEATH ALL EQUIPMENT AND CASEWORK U.O.N.

H. ALL VERTICAL SURFACES TO RECEIVE BASE U.O.N.

I. ACCENT PAINT COLOR WILL RUN CORNER TO CORNER AND FLOOR TO CEILING

WHERE INDICATED.

J. PAINT ALL ACCESS PANELS TO MATCH ADJACENT SURFACE.

K. SEE INTERIOR DETAIL SHEET IN501 FOR FLOORING TRANSITION DETAILS.

L. SEE INTERIOR ELEVATIONS FOR WALL TILE PATTERNS.

M. REFERENCE IN101 FOR FINISH FLOOR PLAN.

N. ALL OPEN CEILINGS ARE TO BE PAINTED GYP-1 UNLESS OTHERWISE

INDICATED. IN OPEN SPACES CEILING COLOR WILL STOP ON ADJACENT WALLS

AT 10'-6" A.F.F.

STANDARD WALL

CLOCK (AT DOOR)

MARKERBOARD

6"

FLATSCREEN TV

ALIGN

WALL SECTION

ENLARGED PLAN/DETAIL

REFERENCE

PLAN NORTH ARROW

TRUE NORTH ARROW

ROOM NAME AND

NUMBER

NOTES BY SYMBOL

(KEYNOTES)

COLUMN CENTERLINE

REVISION1

INTERIOR ELEVATION

MULTIPLE VIEWS

DETAIL IDENTIFICATION

TITLE OF DRAWING

STATED SCALE

A2

A1

A4

A3

VIEW NAME

SCALE: 1/8" = 1'-0"

ROOM

NAME

SIGNAGE TAG

FURNITURE SYMBOLC01

DATUM MARKERLEVEL 2

DRAWNING SYMBOLS

SHEET ON WHICH DETAIL IS

DRAWN

DETAIL IDENTIFICATION

A

FURNISHING CATEGORY

FURNISHING ITEM

T R

U E

N

PLAN

NORTH

I-310

I-201

114'-0"

S1 SIGN NUMBER

A1

GENERAL SHEET NOTES

LEGEND

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

I-001

IN

T

E R

IO

R

S G

E N

E R

A L

N O

T E

S

S Y

M B

O L

S

A N

D

A B

B R

E V

IA

T

IO

N

S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

R e v is io n

D a te

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

No. ARC.2520029 Exp. 12-31-27

DN

4 2 1

A

B

C

D

SECURITY

VESTIBULE

BREAK

OPEN

OFFICE

CIRC

WOMENS

CONFERENCE

LAB C

CIRCULATION

LAB A

LAB B

TEF

OFFICE

OFFICE

OFFICE

1003 ELEC

FIRE RISER

CONFERENCE

MENS

IN201

C4

IN201

C1

C3

CG

CGCG

CG

11 11 11

CGCG

IN203

A1

IN202

E1

IN204 A1

C1

A4

D1

R A

F -L

R A

F -C

R A

F -L

R A

F -C

R A

F -L

R A

F -C

R A

F -L

R A

F -C

R A

F -L

R A

F -C

RAF-L PFT-1

RAF-L PFT-1

R A

F -L

R A

F -E

R A

F -L

R A

F -E

RAF-LRAF-E

RAF-L WOC-1

RAF-L RAF-C1

IN202A1

RAF-LRAF-E

E1

IN204A1

O.H.

RAF-E RAISED ACCESS FLOOR WITH ELECTROSTATIC

DISSIPATIVE FLOORING

RAF-C1 RAISED ACCESS FLOOR WITH CARPET TILE

PFT-1 PORCELAIN FLOOR TILE

SC-1 SEALED CONCRETE

WOC-1 WALK OFF CARPET

CG

CORNER GUARD

RAF-C2 RAISED ACCESS FLOOR WITH ACCENT CARPET TILE

RAF-L RAISED ACCESS FLOOR WITH LUXURY VINYL TILE

FLOORING DIRECTION

A. REFER TO SHEET IN602 FOR FINISH MATERIAL LEGEND.

B. REFER TO SHEET IN601 FOR ROOM FINISH SCHEDULE.

C. REFER TO ARCHITECTURE FOR REFLECTED CEILING PLAN.

D. REFER TO SHEET IN201 - IN202 FOR INTERIOR ELEVATIONS.

E. WHERE COLOR IS SHOWN AS BEING SPECIFIC TO ONE MANUFACTURER MAY BE

SUBMITTED FOR APPROVAL. MANUFACTURERES AND MATERIALS SPECIFIED

ARE NOT INTENDED TO LIMIT THE SELECTIONS OF EQUAL COLOR FROM OTHER

MANUFACTURERS.

F. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL DRAWINGS AND

CONSTRUCTION MANAGER. INSTALL THERMOSTATS NEAR A CORNER OF

A ROOM OR BY LIGHT SWICHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

G. TRANSITIONS MUST MEET ABA GUIDELINES.

H. TRANSITIONS OCCURING UNDER DOORS MUST BE CENTERED UNDER DOOR.

GENERAL SHEET NOTES

SHEET KEYNOTES

LEGEND

GRAPHIC SCALE(S)

1/8" = 1'-0"

0 8' 16' 24'4'

SCALE:

PLAN

NORTH

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN101

IN

T

E R

IO

R

F

IN

IS

H

F L

O O

R P

L A

N

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SCALE 1/8" = 1'-0"

A1

INTERIOR FINISH FLOOR PLAN

1. PT-2 ACCENT PAINT.

2. GROUPING OF AWP-1A, AWP-1B, AND AWP-1C ACOUSTIC WALL PANELS.

3. AWP-2 ACOUSTIC WALL PANEL SYSTEM.

4. CONFIRM WIDTH OF OPENING WITH CHARGING CELL PHONE LOCKER.

5. OPERABLE PARTITION WITH ACOUSTIC WALL COVERING OPR-1. REFER TO

ARCHITECTURE.

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

Tab 3

E1

IN701

IN201

A1

A3

A4

A6

WOMENS

MENS

IN201 A6

A4

A3

A1

SIM.

SIM.

SIM.

SIM.

EQEQ EQEQ

C6

IN501

/2

" 23

A. REFER TO SHEET IN601 FOR FINISH MATERIAL LEGEND AND ROOM FINISH

SCHEDULE.

B. REFER TO ARCHITECTURE FOR REFLECTED CEILING PLAN.

C. REFER TO SHEET IN201 - IN202 FOR INTERIOR ELEVATIONS.

D. FINISHES INDICATED ARE THE APPROVED BASIS OF DESIGN TO CONVEY

COLOR, PATTERN, TEXTURE AND SALIENT CHARACTERISTICS ONLY. THE

LISTING OF MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT THE

SELECTION OF PRODUCTS PROVIDED BY OTHER MANUFACTURERS.

PRODUCTS MEETING THESE CRITERIA WILL BE CONSIDERD AND MUST BE

REVIEWED BY USACE INTERIOR DESIGNER.

E. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL DRAWINGS AND

CONSTRUCTION MANAGER. INSTALL THERMOSTATS NEAR A CORNER OF

A ROOM OR BY LIGHT SWICHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

F. TRANSITIONS MUST MEET ABA GUIDELINES.

G. REFER TO SHEET IF101 FOR ALL FF&E ITEMS.

H. REFER TO A-003 FOR ACCESSIBILITY MOUNTING STADNARDS AND TOILET

ACCESSORIES.

I. PAINT ALL WALLS PT-1 UNLESS OTHERWISE NOTED.

J. PAINT ALL CEILING ELEMENTS, STRUCTURE, DUCTWORK, AND PIPES OTS-1.

GENERAL SHEET NOTES

SHEET KEYNOTES

GRAPHIC SCALE(S)

1/4" = 1'-0"

0 4' 8' 12'2'

SCALE:

3/8" = 1'-0"

0 2' 4' 8'1'

SCALE:

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN201

IN

T

E R

IO

R

E L

E V

A T

IO

N

S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

1. PORCELAIN WALL TILE PWT-1

2. SINK AND FAUCET, REFER TO PLUMBING.

3. STAINLESS STEEL COVE BASE SSC-1.

4. SOLID SURFACE COUNTERTOP SS-1.

5. INSTALL METAL TRIM AT ALL OUTSIDE TILED CORNERS.

6. PLASTIC LAMINATE PL-1 ADA APRON.

7. PAINT DOOR FRAME PT-3 PER SCHEDULE.

8. PLUMBING FIXTURE, REFER TO PLUMBING.

9. TOILET PARTITION TP-1.

10. CHARGING CELL PHONE LOCKERS.

11. PT-2 ACCENT PAINT.

12. GRAB BAR. REFER TO ARCHITECTURE.

13. TOILET ACCESSORY. REFER TO ARCHITECTURE.

14. SOAP DISPENSER. REFER TO ARCHITECTURE.

15. WALL HUNG MIRROR, CENTER ABOVE SINK.

16. LIGHTING DEVICE. REFER TO ELECTRICAL.

17. PAINT PT-1.

18. AWP-2: 428 SILBER

19. AWP-2: 284 HIMMEL

20. AWP-2: 686 ENZIAN

21. EXTEND WALL AND BASE FINISH IN WALL RECESS.

22. PAPER TOWEL DISPENSER/DISPOSAL. REFER TO ARCHITECTURE.

23. RESILIENT BASE RB-1.

24. MECHANICAL EQUIPMENT. REFER TO MECHANICAL.

SCALE 1/4" = 1'-0"

C4

ENLARGED PLAN - RESTROOMS

SCALE 3/8" = 1'-0"

A1

MENS NORTH ELEVATION

(WOMENS SIM. / OPP)

SCALE 3/8" = 1'-0"

A3

MENS - WEST ELEVATION

(WOMENS OPP.)

SCALE 3/8" = 1'-0"

A4

MENS - SOUTH ELEVATION

(WOMENS OPP.)

SCALE 3/8" = 1'-0"

A6

MENS - EAST ELEVATION

(WOMENS SIM. / OPP.)

SCALE 3/8" = 1'-0"

C1

VESTIBULE - SOUTH ELEVATION

SCALE 3/8" = 1'-0"

C3

VESTIBULE - NORTH ELEVATION

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

A. REFER TO SHEET IN601 FOR FINISH MATERIAL LEGEND AND ROOM FINISH

SCHEDULE.

B. REFER TO ARCHITECTURE FOR REFLECTED CEILING PLAN.

C. REFER TO SHEET IN201 - IN202 FOR INTERIOR ELEVATIONS.

D. FINISHES INDICATED ARE THE APPROVED BASIS OF DESIGN TO CONVEY

COLOR, PATTERN, TEXTURE AND SALIENT CHARACTERISTICS ONLY. THE

LISTING OF MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT THE

SELECTION OF PRODUCTS PROVIDED BY OTHER MANUFACTURERS.

PRODUCTS MEETING THESE CRITERIA WILL BE CONSIDERD AND MUST BE

REVIEWED BY USACE INTERIOR DESIGNER.

E. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL DRAWINGS AND

CONSTRUCTION MANAGER. INSTALL THERMOSTATS NEAR A CORNER OF

A ROOM OR BY LIGHT SWICHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

F. TRANSITIONS MUST MEET ABA GUIDELINES.

G. REFER TO SHEET IF101 FOR ALL FF&E ITEMS.

H. REFER TO A-003 FOR ACCESSIBILITY MOUNTING STADNARDS AND TOILET

ACCESSORIES.

I. PAINT ALL WALLS PT-1 UNLESS OTHERWISE NOTED.

J. PAINT ALL CEILING ELEMENTS, STRUCTURE, DUCTWORK, AND PIPES OTS-1.

E1

IN701

A1

IN701

1'-6" 2'-6"

9' - 10 1/8"

1' - 6"1' - 6"1' - 6"

1' - 4 1/8"1' - 9"

1' - 6"1' - 6"1' - 6"1' - 0 1/2"11 1/2" 1' - 3" 1' - 3" 2' - 6 5/8"

A4

IN701

TYP

A1

IN702

OPEN TO

BEYOND

1' - 6" 2' - 0" 2' - 0"

CLEAR

3' - 2"

C L E

A R

A4

IN702

TYP

IN202

E5

E2 C3

AP02

TB01

TB01

(2)

CG01

(8)

AP03

AP01

AC01

C1

F4

IN501

4' - 0"

1' - 6 1/2"

6"

TYP

C9

IN501

SCALE 3/8" = 1'-0"

E5

BREAK - NORTH ELEVATION

SCALE 3/8" = 1'-0"

E2

BREAK - WEST ELEVATION

GENERAL SHEET NOTES

SHEET KEYNOTES

GRAPHIC SCALE(S)

3/8" = 1'-0"

0 2' 4' 8'1'

SCALE:

1/4" = 1'-0"

0 4' 8' 12'2'

SCALE:

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN202

IN

T

E R

IO

R

E L

E V

A T

IO

N

S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SCALE 1/4" = 1'-0"

E1

ENLARGED PLAN - BREAK

1. SINK AND FAUCET, REFER TO PLUMBING.

2. PAINT PT-1.

3. AC1 WALL CLOCK, BATTERY (FF&E).

4. PL-1 PLASTIC LAMINATE UPPER CABINETS.

5. AP01, MICROWAVE (FFE).

6. AP03, COFFEE MAKER (FFE).

7. FULL HEIGHT SOLID SURFACE BACKSPLASH SS-1.

8. RESILIENT BASE RB-1.

9. FRP-1 FIBER REINFORCED PANEL.

10. MOP SINK. REFER TO PLUMBING.

11. FIRE EXTINGUISHING CABINET. REFER TO ARCHITECTURE.

12. PL-1 PLASTIC LAMINATE END PANEL.

13. PL-1 PLASTIC LAMINATE FLOATING SHELVES.

14. CORNER GUARD GG-1.

15. ACOUSTIC CEILING CLOUD ACC-1. REFER TO ARCHITECTURE REFLECTED

CEILING PLANS.

16. CHAIR RAIL CR-1.

17. ELECTRICAL DEVICE. REFER TO ELECTRICAL .

18. FIRE ALARM DEVICE. REFER TO FIRE PROTECTION.

19. PL-1 PLASTIC LAMINATE CABINETS AND SS-1 SOLID SURFACE COUNTERTOP.

20. DRINKING FOUNTAIN, REFER TO ARCHITECTURE.

21. LIGHTING DEVICE. REFER TO ELECTRICAL.

SCALE 3/8" = 1'-0"

A1

FIRE RISER - WEST

ELEVATION

SCALE 3/8" = 1'-0"

C1

BREAK - SOUTH ELEVATION

SCALE 3/8" = 1'-0"

C3

BREAK - EAST ELEVATION

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

OPEN

TO

BEYOND

EQ

F1

IN501

3' - 11" 2' - 6"

/2

TYP

13 14

EQTYP

TYP

12 1212

OPEN TO

BEYOND

TYP

17 17

A. REFER TO SHEET IN602 FOR FINISH MATERIAL LEGEND.

B. REFER TO SHEET IN601 FOR ROOM FINISH SCHEDULE.

C. REFER TO ARCHITECTURE FOR REFLECTED CEILING PLAN.

D. REFER TO SHEET IN201 - IN202 FOR INTERIOR ELEVATIONS.

E. FINISHES INDICATED ARE THE APPROVED BASIS OF DESIGN TO CONVEY

COLOR, PATTERN, TEXTURE AND SALIENT CHARACTERISTICS ONLY. THE

LISTING OF MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT THE

SELECTION OF PRODUCTS PROVIDED BY OTHER MANUFACTURERS.

PRODUCTS MEETING THESE CRITERIA WILL BE CONSIDERD AND MUST BE

REVIEWED BY USACE INTERIOR DESIGNER.

F. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL DRAWINGS AND

CONSTRUCTION MANAGER. INSTALL THERMOSTATS NEAR A CORNER OF

A ROOM OR BY LIGHT SWICHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

G. TRANSITIONS MUST MEET ABA GUIDELINES.

H. REFER TO SHEET IF101 FOR ALL FF&E ITEMS.

I. REFER TO A-003 FOR ACCESSIBILITY MOUNTING STADNARDS AND TOILET

ACCESSORIES.

J. PAINT ALL WALLS PT-1 UNLESS OTHERWISE NOTED.

K. PAINT ALL CEILING ELEMENTS, STRUCTURE, DUCTWORK, AND PIPES OTS-1.

SCALE 3/8" = 1'-0"

A1

OPEN OFFICE - NORTH ELEVATION

SCALE 3/8" = 1'-0"

D1

OPEN OFFICE - WEST ELEVATION

GENERAL SHEET NOTES

SHEET KEYNOTES

GRAPHIC SCALE(S)

3/8" = 1'-0"

0 2' 4' 8'1'

SCALE:

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN203

IN

T

E R

IO

R

E L

E V

A T

IO

N

S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

1. AC01, WALL CLOCK, BATTERY.

2. FIRE EXTINGUISHER CABINET, REFER TO ARCHITECTURE.

3. LIGHTING FIXTURE, REFER TO ELECTRICAL.

4. LIGHTING DEVICE. REFER TO ELECTRICAL.

5. RESILIENT BASE RB-1.

6. GROUPING OF AWP-1A, AWP-1B, AND AWP-1C - CONTAINS 20% AWP-1A, 40%

AWP-1B, AND 40% AWP-1C.

7. AWP-1A.

8. AWP-1B.

9. AWP-1C.

10. SIGNAGE. REFER TO IG101 SIGNAGE PLAN.

11. CORNER GUARD GG-1.

12. ACOUSTIC CEILING CLOUD ACC-1. REFER TO ARCHITECTURE REFLECTED

CEILING PLANS.

13. SOFFIT, REFER TO ARCHITECTURE.

14. PAINT PT-1.

15. ELECTRICAL DEVICE. REFER TO ELECTRICAL .

16. PAINT PT-2. .

17. MECHANICAL EQUIPMENT. REFER TO MECHANICAL.

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

6' - 2 3/4"

4' - 0"

5' - 4"

5' - 4"

4' - 0"5' - 7" 5' - 9"4' - 0"

TYP

11 5

A. REFER TO SHEET IN601 FOR FINISH MATERIAL LEGEND AND ROOM FINISH

SCHEDULE.

B. REFER TO ARCHITECTURE FOR REFLECTED CEILING PLAN.

C. REFER TO SHEET IN201 - IN202 FOR INTERIOR ELEVATIONS.

D. FINISHES INDICATED ARE THE APPROVED BASIS OF DESIGN TO CONVEY

COLOR, PATTERN, TEXTURE AND SALIENT CHARACTERISTICS ONLY. THE

LISTING OF MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT THE

SELECTION OF PRODUCTS PROVIDED BY OTHER MANUFACTURERS.

PRODUCTS MEETING THESE CRITERIA WILL BE CONSIDERD AND MUST BE

REVIEWED BY USACE INTERIOR DESIGNER.

E. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL DRAWINGS AND

CONSTRUCTION MANAGER. INSTALL THERMOSTATS NEAR A CORNER OF

A ROOM OR BY LIGHT SWICHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

F. TRANSITIONS MUST MEET ABA GUIDELINES.

G. REFER TO SHEET IF101 FOR ALL FF&E ITEMS.

H. REFER TO A-003 FOR ACCESSIBILITY MOUNTING STADNARDS AND TOILET

ACCESSORIES.

I. PAINT ALL WALLS PT-1 UNLESS OTHERWISE NOTED.

J. PAINT ALL CEILING ELEMENTS, STRUCTURE, DUCTWORK, AND PIPES OTS-1.

SCALE 3/8" = 1'-0"

C1

CONFERENCE 1016 / 1015 - SOUTH ELEVATION

SCALE 3/8" = 1'-0"

A1

CONFERENCE 1016 - EAST ELEVATION

SCALE 3/8" = 1'-0"

A4

CONFERENCE 1016 - WEST ELEVATION

GENERAL SHEET NOTES

SHEET KEYNOTES

GRAPHIC SCALE(S)

3/8" = 1'-0"

0 2' 4' 8'1'

SCALE:

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN204

IN

T

E R

IO

R

E L

E V

A T

IO

N

S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SCALE 3/8" = 1'-0"

E1

CONFERENCE 1016 / 1015 - NORTH ELEVATION

1. AC01, WALL CLOCK, BATTERY.

2. PROVIDE WALL BLOCKING FOR TELEVISION/ MONITOR AS REQUIRED. REFER TO

C3 / A-701.

3. AC1 WALL CLOCK, BATTERY (FF&E).

4. ACOUSTIC CEILING BAFFLE SYSTEM ACB-1 / ACB-2. REFER TO ARCHITECTURE

REFLECTED CEILING PLAN.

5. OPERABLE PARTITION. FINISH: ACOUSTIC WALL COVERING OPR-1.

6. AC06, MARKERBOARD 48" X 36" (FFE).

7. ELECTRICAL DEVICE. REFER TO ELECTRICAL .

8. OPERABLE PARTITION WITH ACOUSTIC WALL COVERING OPR-1. REFER TO

ARCHITECTURE.

9. RESILIENT BASE RB-1.

10. FIRE ALARM DEVICE. REFER TO FIRE PROTECTION.

11. ACOUSTICAL FELT CEILING BAFFLES - ACB-1 AND ACB-2 REFERENCE

ELECTRICAL FOR LIGHTING INFORMATION. REFER TO ARCHITECTURE

REFLECTED CEILING PLAN.

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

RESILIENT FLOORING ADHERED TO RASIED

ACCESS FLOOR SYSTEM

ALUMINUM TRANSITION STRIP

TILE FLOORING AS

SCHEDULED

THINSET/ MORTAR BED

GROUT AS SCHEDULED

RAISED ACCESS FLOOR

CONCRETE SUBSTRATE

WALL CONSTRUCTION AS

SCHEDULED

CORNER GUARD

COVER

DIRECT ADHERE WITH

ADHESIVE TAPE

R 1/4"2"

3/8"

WALL CONSTRUCTION AS

SCHEDULED

WALL TILE AS SCHEDULED

FLOOR TILE AS SCHEDULED

METAL COVE TRANSITION AS SCHEDULED

THIN-SET MORTAR BED

TILE AS SCHEDULED.

THIN-SET MORTAR BED.

CONT. DECORATIVE ANOD ALUM

EDGE PROTECTION WITH 87°

SLOPED WALL. SATIN FINISH. GROUT AS SCHEDULED.

GROUT AS SCHEDULED.

CONSTRUCTION AS SCHEDULED.

TILE AS SCHEDULED.

RESILIENT FLOORING ADHERED TO RAISED

ACCESS FLOOR SYSTEM

BUTT JOINT

ESD FLOORING AS

SCHEDULED

RAISED ACCESS FLOOR

TILE AS SCHEDULED.

THIN-SET MORTAR BED.

CONT. DECORATIVE ANOD ALUM

EDGE PROTECTION WITH 87°

SLOPED WALL. SATIN FINISH. GROUT AS SCHEDULED.

GROUT AS SCHEDULED.

WALL FINISH AS SCHEDULED.

9mm DEEP ACOUSTICAL WALL PANEL

AS SCHEDULED ; 45° EDGE WHERE

ACOUSTICAL PANEL MEETS

ACOUSTICAL PANEL AS SHOWN

PARTITION AS SCHEDULED

DIRECT ADHERE FLUSH MOUNT AS REQUIRED

PER MANUFACTURER'S RECOMMENDATIONS

PARTITION, REFER TO ARCHITECTURAL

DRAWINGS

FIRE-TREATED 1/4" PLYWOOD SHEATHING

SUBSTRATE

1-1/2” HEAVY DUTY CONTINUOUS Z-CLIP

BARS WITH 5/8" LIFT-OFF, SPACED

MINIMUM 36" O.C. VERTICALLY.

ACOUSTICAL WALL PANEL AS SCHEDULED

DIM 'B'

HELIX WIDTH

D

IM

'A

H E

L

IX

L E

N G

T H

T R

A F

F

IC

D

IR

E C

T

IO

N

DIM 'A'

SECTION Y-Y

SECTION X-X

TYPICAL PLAN VIEW

ALUMINUM

THRESHOLD FRAME

(16A064000)

DIM 'B'

HELIX

WIDTH

FEMALE

CONNECTOR

X X

CARPET INSERT AS

SCHEDULED

[1

.8 m m

/1

MALE

CONNECTOR

FEMALE

CONNECTOR

MALE

CONNECTOR

Y Y

MASONRY LAG

FASTENER

(90H006004) 24" (609.6mm) O.C.

HELIX Z1 TILE

AROUND

PERIMETER FOR

ANY TRIMMING.

FIELD NOTE:

DIM 'B' TO BE TAKEN FROM EDGE OF DOOR

THRESHOLD TO EDGE OF DOOR THRESHOLD

DOOR THRESHOLD

RESILIENT FLOORING

ADHERED TO RAISED

ACCESS FLOOR

SYSTEM

RAISED ACCESS

FLOOR

U

.N .O

WALL AS SCHEDULED

ONE-PIECE PVC TOP

CAP MOULDING

FRP WALL PANEL AS

SCHEDULED

ONE-PIECE PVC BOTTOM

CAP MOULDING

WALL BASE AS

SCHEDULED

WALL FINISH AS

SCHEDULED

SCHEDULED CARPET FINISH.

EXTRUDED VINYL OR RUBBER REDUCER STRIP,

CONTINUOUS. CENTER BELOW DOOR THICKNESS

WHEN PRESENT.

RESILIENT FLOORING AS

SCHEDULED

RAISED ACCESS FLOOR

CR-1 WOOD CHAIR RAIL

WALL AS SCHEDULED

CONSTRUCTION ADHESIVE

FINISHING NAIL

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN501

IN

T

E R

IO

R

D E

T A

IL

S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SCALE 6" = 1'-0"

A1

RESILIENT FLOORING TO TILE

SCALE NTS

C1

CORNER GUARD - SURFACE MOUNT

SCALE NTS

C3

COVE AT BASE

SCALE NTS

D1

METAL TRIM AT OUTSIDE CORNER

SCALE 12" = 1'-0"

A3

RESILIENT FLOORING TO ELECTROSTATIC DISSAPATIVE FLOORING

SCALE 6" = 1'-0"

D3

METAL TRIM AT TILE WAINSCOT

SCALE 3" = 1'-0"

F1

ACOUSTICAL WALL PANEL INSTALLATION DETAIL

SCALE 3" = 1'-0"

C6

BASE DETAIL - ACOUSTICAL WALL PANEL

SCALE 3" = 1'-0"

D6

WALK OFF CARPET DETAIL

SCALE 6" = 1'-0"

F4

FIBER REINFORCED PANEL

SCALE 6" = 1'-0"

A6

RESILIENT FLOORING TO CARPET

SCALE 1" = 0'-3"

C9

WOOD CHAIR RAIL

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

3"

1' - 3"

/2

2' - 0"

PL-1 LAMINATE

DOORS

ADJUSTABLE SHELF

4" BRUSHED STAINLESS

STEEL PULLS

SS-1 BACKSPLASH

SS-1 COUNTERTOP WITH

EASED EDGE

4" BRUSHED STAINLESS

STEEL PULLS

ADJUSTABLE SHELF

RB-1 RESILIENT BASE

PROVIDE SEALANT AT JOINT

IN701

F4

PARTITION AS SCHEDULED

CABINET INTERIOR

WITH WHITE

MELAMINE FINISH

(TYPICAL)

PL-1 PLASTIC LAMINATE FRONTS

SS-1 BACKSPLASH

SINK AND FAUCET: REFER TO

PLUMBING

COUNTERTOP SUPPORTS:

REFER TO STRUCTURAL

SCHEDULED WALL BASE

/8

C L E

A R

M

IN

M

IN9

MIN

6"

REMOVABLE PLASTIC LAMINATE

PANEL PL-1

1/2" SOLID SURFACE COUNTER

TOP AND BACKSPLASH OVER

3/4" EXTERIOR GRADE

PLYWOOD

PARTITION AS SCHEDULED

IN701

E6

RAKKS ADA COMPLIANT

SUPPORT BRACKET

/4

SOLID SURFACE SS-1

COUNTERTOP

3/4" COMPOSITE WOOD

PRODUCT

/4

/2

EASED EDGE

R

/2

R 1/2"

/4

WOOD BLOCKING

SOLID SURFACE

SS-1

1/2"

1/2"

PRIOR TO INSTALLATION IN STUD CAVITY,

FASTEN WOOD TO WOOD WITH 3" 10d

STAINLESS STEEL FRAMING NAILS

(2) 2 x 6 TREATED WOOD BLOCKING

ATTACH WOOD BLOCKING TO STEEL STUDS WITH

#10-16 (2.5" LONG) STAINLESS STEEL PAN HEAD

TYPE A SQUARE DRIVE SCREWS, PROVIDE

MINIMUM 2 SCREWS ON EACH END OF EACH 2 x 6

NOTCH BLOCKING AROUND STUD FLANGE

WHERE IT DOES NOT ENGAGE FLAT SIDE

FINISH AS SCHEDULED

STEEL STUD BEYOND

AS SCHEDULED

PARTITION TYPE

3/4" COMPOSITE WOOD

PRODUCT SHELF WITH 1/2"

DEEP POPLAR EDGING.

COVER ALL EXPOSED

SURFACES WITH WHITE

PLASTIC LAMINATE TO

MATCH CABINET INTERIOR

BOTTOM OF CABINET

10" AT WALL CABINET

1'-4" AT BASE CABINET

HEAVY-DUTY, STAINLESS

STEEL SHELF STANDARDS

WITH ADJUSTABLE SHELF

BRACKETS - SURFACE MOUNT

A T

B A

S E

C A

B

IN

E T

A T

W A

L L C

A B

IN

E

T

EQUAL 1" 1" EQUAL

FRONT OF CABINETBACK OF CABINET

SOLID SURFACE SS-1

COUNTERTOP

3/4" COMPOSITE WOOD

PRODUCT

/4

/2

EASED EDGE

R

/2

R 1/2"

SOLID SURFACE SS-1

COUNTERTOP

3/4" COMPOSITE WOOD

PRODUCT

PLASTIC LAMINATE ON

3/4" COMPOSITE WOOD

PRODUCT

DRAWER

BOTTOM

WIRE PULL CENTERED

ON DRAWER UNIT

PROVIDE WHITE LINER ON

1/4" COMPOSITE WOOD

PRODUCT ON BOTTOM AND

SIDES, LINER ON 1/2"

COMPOSITE WOOD

PRODUCT AT REAR

PLASTIC

LAMINATE ON

POPLAR EDGE

/4

/4

3/4"

DRAWER SIDE BEYOND

/2

PL-1 PLASTIC LAMINATE

FRONTS

SS-1 COUNTERTOP

WITH EASED EDGE

CABINET INTERIOR

WITH WHITE

MELAMINE FINISH

(TYPICAL)

4" BRUSHED STAINLESS

STEEL PULLS, ADD TEXT

(STICKER) FOR WASTE OR

RECYCLE ON PULL.

3"

PARTITION AS SCHEDULED

BASIS OF DESIGN, KNAPE

& VOGT SLIDING

BRACKETS (USC18-2-50).

FINISH ON FULL

EXTENSION SLIDES.

BASIS OF DESIGN, KNAPE &

VOGT TRASH CAN (QT35PB-

WH) - (FFE CFCI)

SS-1 BACKSPLASH

PL-1 LAMINATE

DOORS

ADJUSTABLE SHELF

4" BRUSHED STAINLESS

STEEL PULLS

IN701

E4

RB-1 RESILIENT BASE

PROVIDE SEALAT AT JOINT

GRAPHIC SCALE(S)

6" = 1'-0"

0 2" 4" 6"1"

SCALE:

1 1/2" = 1'-0"

0 6" 1' 2'3"

SCALE:

3" = 1'-0"

0 3" 6" 1'

SCALE:

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN701

IN

T

E R

IO

R

M

IL

L W

O R

K S

E C

T

IO

N S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SCALE 1 1/2" = 1'-0"

A1

MILLWORK SECTION - UPPER & LOWER CABINETS

SCALE 1 1/2" = 1'-0"

E1

SECTION AT SINK WITH APRON

SCALE 6" = 1'-0"

E6

COUNTERTOP EDGE DETAIL

SCALE 3" = 1'-0"

A6

BLOCKING DETAIL

SCALE 1 1/2" = 1'-0"

F4

ADJUSTABLE SHELF DETAIL

SCALE 6" = 1'-0"

E4

COUNTERTOP DETAIL

SCALE 6" = 1'-0"

C6

COUNTERTOP DETAIL

SCALE 1 1/2" = 1'-0"

A4

MILLWORK SECTION - WASTE AND RECYCLE

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

3"

/2

SS-1 BACKSPLASH

4" BRUSHED STAINLESS

STEEL PULLS.

SOLID SURFACE SS-1

COUNTER TOP

PL-1 PLASTIC LAMINATE

FRONTS

ADJUSTABLE SHELF. FINISH

TO MATCH CABINET DOORS

RB-1 RESILIENT BASE

1 1/2" THICK SHELF, WITH POCKETS

TO ACCEPT STEEL SUPPORT

CANTILEVER TUBES. PLASTIC

LAMINATE PL-1 FINISH.

1 1/2" x 1/2" STL. BENT PLATES

WELDED TOGETHER AND

CANTILEVERED FROM STEEL

MOUNTING PLATE.

3/16" THICK STEEL MOUNTING PLATE TO BE

CONCEALED BY WALL FINISH. PROVIDE

PLYWOOD SUBSTRATE FOR SUPPORT AND

TO ACHIEVE FLUSH CONDITION FOR FINISH

INSTALLATION. COUNTER-SINK MECHANICAL

FASTENERS AS SHOWN.

SET SCREW, TYP.

PROVIDE IN-WALL BLOCKING BETWEEN

STUD FRAMING.

/4

1' - 0"

1' - 0"

PARTITION AS SCHEDULED

PAINT AS SCHEDULED

PAINT AS SCHEDULED 1

1'-3"

PLASTIC LAMINATE PL-1

FRONTS

ADJUSTABLE SHELF.

FINISH TO MATCH

CABINET DOORS

4" BRUSHED STAINLESS

STEEL PULLS

WALL FINISH AS SCHEDULED.

PARTITION AS SCHEDULED

REFRIGERATOR

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN702

IN

T

E R

IO

R

M

IL

L W

O R

K S

E C

T

IO

N S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SCALE 1 1/2" = 1'-0"

A1

MILLWORK SECTION - BASE CABINET WITH FLOATING SHELVES

SCALE 1 1/2" = 1'-0"

A4

MILLWORK SECTION - UPPER & BASE CABINET AT REFRIGERATOR

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

Tab 4

GENERAL SHEET NOTES

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IN601

R O

O M

F

IN

IS

H

S C

H E

D U

L E

A N

D F

IN

IS

H L

E G

E N

D

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

ROOM FINISH SCHEDULE

ROOM NAME FLOOR FINISH

BASE

FINISH

WALL FINISH

CEILING FINISH NOTES & REMARKSNORTH EAST SOUTH WEST

1000 VESTIBULE WOC-1 RB-1 PT-2 / AWP-2 PT-1 PT-1 PT-1 GYP-2 PAINT CELL PHONE LOCKER RECESS PT-1. CONTINUE RB-1 BEHIND CELL PHONE LOCKERS

1001 OPEN OFFICE RAF-L RB-1 PT-1 / AWP-1A /

AWP-1B / AWP-1C

PT-1 PT-1 PT-1 / PT-2 GYP-1

1002 BREAK RAF-L RB-1 PT-1 / SS-1 PT-1 / SS-1 PT-1 / CR-1 PT-1 / CR-1 GYP-1 / ACC-1 SS-1 COUNTER TOPS; PL-1 CABINETS; GR-1 GROUT. REFER TO INTERIOR ELEVATIONS ON IN202

1003 OFFICE RAF-C1 RB-1 PT-1 PT-1 PT-2 PT-1 GYP-1 / ACB-1 / ACB-2

1004 OFFICE RAF-C1 RB-1 PT-1 PT-1 PT-2 PT-1 GYP-1 / ACB-1 / ACB-2

1005 OFFICE RAF-C1 RB-1 PT-1 PT-1 PT-2 PT-1 GYP-1 / ACB-1 / ACB-2

1006 TEF RAF-E RB-1 PT-1 PT-1 PT-1 PT-1 GYP-1

1007 LAB A RAF-E RB-1 PT-1 PT-1 PT-1 PT-1 GYP-1 / ACC-1

1008 LAB B RAF-E RB-1 PT-1 PT-1 PT-1 PT-1 GYP-1 / ACC-1

1009 LAB C RAF-E RB-1 PT-1 PT-1 PT-1 PT-1 GYP-1 / ACC-1

1010 CIRCULATION RAF-L RB-1 PT-1 -- PT-1 PT-1 GYP-1

1011 CIRC RAF-L RB-1 PT-1 PT-1 -- PT-2 GYP-1

1012 WOMENS PFT-1 SSC-1 PWT-1 PWT-1 PWT-1 PWT-1 GYP-2 SS-1 COUNTER TOPS; PL-1 BASE CABINET; GR-1 GROUT; TP-1 TOILET PARTITIONS. REFER TO INTERIOR ELEVATIONS ON IN201

1013 MENS PFT-1 SSC-1 PWT-1 PWT-1 PWT-1 PWT-1 GYP-2 SS-1 COUNTER TOPS; PL-1 BASE CABINET; GR-1 GROUT; TP-1 TOILET PARTITIONS. REFER TO INTERIOR ELEVATIONS ON IN201

1014 CONFERENCE RAF-C2 RB-1 PT-2 OPR-1 / PL-1 PT-1 PT-1 GYP-1 / ACB-1 / ACB-2 OPERABLE WALL. REFER TO ELEVATION C1 / IN201

1015 CONFERENCE RAF-C2 RB-1 PT-2 PT-1 PT-1 OPR-1 / PL-1 GYP-1 / ACB-1 / ACB-2 OPERABLE WALL. REFER TO ELEVATION C1 / IN201

1016 SECURITY RAF-C1 RB-1 PT-1 PT-2 PT-1 PT-1 GYP-1 / ACB-1 / ACB-2

1018 FIRE RISER SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 / FRP-1 OTS-1

1019 ELEC SC-1 RB-1 PT-1 PT-1 PT-1 PT-1 OTS-1

A. REFER TO SHEET IN101 FOR FINISH FLOOR PLAN.

B. REFER TO ARCHITECTURE FOR REFLECTED CEILING PLAN.

C. REFER TO SHEET IN201 - IN202 FOR INTERIOR ELEVATIONS.

D. FINISHES INDICATED ARE THE APPROVED BASIS OF DESIGN TO CONVEY

COLOR, PATTERN, TEXTURE AND SALIENT CHARACTERISTICS ONLY. THE

LISTING OF MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT THE

SELECTION OF PRODUCTS PROVIDED BY OTHER MANUFACTURERS. PRODUCTS

MEETING THESE CRITERIA WILL BE CONSIDERED AND MUST BE REVIEWED

BY USACE INTERIOR DESIGNER.

E. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL DRAWINGS AND

CONSTRUCTION MANAGER. INSTALL THERMOSTATS NEAR A CORNER OF

A ROOM OR BY LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

F. TRANSITIONS MUST MEET ABA GUIDELINES.

G. TRANSITIONS OCCURRING UNDER DOORS MUST BE CENTERED UNDER DOOR.

FINISH LEGEND

ITEM CODE DESCRIPTION MODEL COLOR SIZE NOTES LOCATION

FLOORING

PFT-1 PORCELAIN FLOOR TILE MALIBU HONEY 12" X 70" RESTROOMS

RAF-C1 RAISED ACCESS FLOOR WITH CARPET TILE OPEN AIR 418 107042 CHARCOAL 50CM X 50CM REFER TO ARCHITECTURAL DETAILS PRIVATE OFFICES AND SECURITY

RAF-C2 RAISED ACCESS FLOOR WITH ACCENT CARPET TILE KNITSTITCH 103339 LINEN / LAPIS 50CM X 50CM REFER TO ARCHITECTURAL DETAILS CONFERENCE ROOMS

RAF-E RAISED ACCESS FLOOR WITH ELECRTOSTATIC

DISSIPATIVE FLOORING

COLOREX SD 1502206 MOONSTONE 24"X24" REFER TO ARCHITECTURAL DETAILS LABS

RAF-L RAISED ACCESS FLOOR WITH LUXURY VINYL TILE CHRONICAL OAK ARCHIVE 4620 6" X 24" REFER TO ARCHITECTURAL DETAILS CORRIDORS AND BREAK ROOM

SC-1 SEALED CONCRETE SELECTSEAL PLUS CLEAR PER PLAN

WOC-1 WALK OFF CARPET WITH THRESHOLD FRAME BLACK SEE PLAN VESTIBULE

BASE

RB-1 RESILIENT BASE TYPE TS NAVY BLUE 4" HIGH

SSC-1 STAINLESS STEEL COVE BASE -- CLASSIC GREY 3/8" H

WALLS

AWP-1A ACOUSTIC WALL PANEL -- 26 FADED DENIM 12" X 12" TILE. 9 MM DEPTH ADHESIVE BACKING. DIAMOND LAYOUT WITH

AWP-2 AND AWP-3

OPEN OFFICE

AWP-1B ACOUSTIC WALL PANEL -- 66 PEWTER 12" X 12" TILE. 9 MM DEPTH ADHESIVE BACKING. DIAMOND LAYOUT WITH

AWP-1 AND AWP-3

OPEN OFFICE

AWP-1C ACOUSTIC WALL PANEL -- 50 IVORY 12" X 12" TILE. 9 MM DEPTH ADHESIVE BACKING. DIAMOND LAYOUT WITH

AWP-1 AND AWP-2

OPEN OFFICE

AWP-2 ACOUSTIC WALL PANEL SYSTEM 3-COLOR PATTERN 2: FF-AR-BLO3-004

ARO BLOCK

686 ENZIAN, 428 SILBER, 284 HIMMEL 3 1'-6" x 8" x 1/2" ADHESIVE BACKING. REFER TO ELEVATION FOR

PATTERN AND GROUPING SIZE.

VESTIBULE

FRP-1 FIBER REINFORCED PANEL SMOOTH FRP LIGHT GREY 48" AFF HEIGHT FIRE RISER

PT-1 PAINT, FIELD -- R-4 NEW RED - (OZ) ,1(32), 1(64), -(128) , W1-WHITE,

6(OZ), 8(32), -(64), - (128)

PT-2 PAINT, ACCENT -- B-1 BLACK 5 (OZ) ,57(32) -(64), -(128) , Y3-GOLD, 15(OZ),

32 (32), -(64), -(128)

PWT-1 PORCELAIN WALL TILE FORDHAM GRIGIO GRIGIO 12" X 24" RESTROOMS

CEILINGS

ACB-1 ACOUSTIC CEILING BAFFLE UNLIT 8" H PEBBLE (PEB)

ACB-2 ACOUSTIC CEILING BAFFLE WITH INTERGRATING LIGHTING LIT 8" H PEBBLE (PEB)

ACC-1 ACOUSTIC CEILING CLOUD -- TONAL TAUPE 34

GYP-1 GYPSUM CEILING, PAINT -- BLACK EGG SHELL FINISH

GYP-2 GYPSUM CEILING, EPOXY PAINT INTERIOR ACRYLIC LATEX PAINT WHITE SEMI-GLOSS FINISH

OTS-1 OPEN TO STRUCTURE - PAINTED -- BLACK FLAT FINISH

MISCELLANEOUS

CG-1 CORNER GUARD CORNER GUARDS 858 PUMICE 3" LEGS ALL OUTSIDE GYPSUM CORNERS.

CR-1 WOOD CHAIR RAIL -- PAINT PT-2 4 3/8"H x 3/8"P x 96"L PRIMED FINGERJOINT PINE BREAK ROOM

GR-1 GROUT -- STERLING SILVER

LK-1 CELL PHONE CHARGING LOCKER -- STANDARD WHITE

OPR-1 OPERABLE PARTITION, ACOUSTIC WALL COVERING MARIN 1300 DOLPHIN 1300-1147 FOR USE ON SKYFOLD OPERABLE PARTITION CONFERENCE ROOM

PT-3 PAINT - DOORS, FRAMES, AND SIGNAGE -- B-1 BLACK 5 (OZ) ,57(32) -(64), -(128) , Y3-GOLD, 15(OZ), 32 (32), -(64), -(128)

TP-1 TOILET PARTITION PARTITIONS DESERT STONE S406

MILLWORK

PL-1 PLASTIC LAMINATE HPL 8232 CONTINENTAL WALNUT 05 TIMBERGRAIN TEXTURE ALL CABINETS AND IN CONFERENCE

ROOM ON OPERABLE PARTITION

SS-1 SOLID SURFACE COUNTERTOP SOLID SURFACE BROOKLYN CONCRETE 9219GS

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

Tab 5

4 2 1

A

B

C

D

SECURITY

VESTIBULE

BREAK

OPEN

OFFICE

CONFERENCE

CIRC

WOMENS

CONFERENCE

1015LAB C

CIRCULATION

LAB A

LAB B

TEF

OFFICE

OFFICE

OFFICE

ELEC

FIRE RISER

CONFERENCE

MENS

S8

S7 S6S5

S4

S3

S17

S16S15

S12

S13

S11

S9S10

S2

S26

S14

S21 S24

S27

S30

S1

A. ROOM NAMES FOR SIGNAGE TO BE VERIFIED WITH USER BEFORE

INSTALLATION. CONFIRM FINAL ROOM NAMES AND NUMBERS WITH

CONTRACTING OFFICER PRIOR TO ORDERING. SIGNAGE TO COMPLY

WITH THE ARCHITECTURAL BARRIERS ACT.

B. SIGNS TO BE MOUNTED ACCORDING TO MANUFACTURER'S

INSTALLATION INSTRUCTIONS.

C. REFER TO SHEET IG601 FOR SIGNAGE SCHEDULE AND DETAILS.

D. ALL RAISED CHARACTERS ARE BETWEEN 5/8" MIN TO 2" MAX IN HEIGHT

& MADE IN CONTRASTING COLOR TO THE BACKGROUND. FONT MUST BE

SANS-SERIF / UPPERCASE. ALL BRAILLE IS ENGLISH.

E. ALL RAISED CHARACTERS, BRAILLE AND PICTOGRAMS TO BE LOCATED

BETWEEN 48" AND 60" AFF. TO BASELINE OF TEXT.

F. ALL CHARACTERS & BRAILLE MUST BE RAISED 1/32" ROUNDED EDGES.

G. WHERE A SIGN IS PROVIDED AT A DOOR, INSTALL ON LATCH SIDE. SIGNS

ON DOUBLE DOORS WITH TWO ACTIVE LEAFS MUST BE AT THE RIGHT

SIDE OF THE RIGHT HAND DOOR. SIGNS ON DOUBLE DOORS WITH

AN INACTIVE LEAF ARE TO BE INSTALLED ON INACTIVE LEAF. MOUNT ON

NEAREST ADJACENT WALL WHERE THERE IS INSUFFICIENT WIDTH AT

DOOR.

H. FOR SIGNS MOUNTED ON GLAZING OR TRANSPARENT PARTITIONS

INSTALL AN EQUAL SIZE BLANK SIGN ON OPPOSITE SIDE OF PARTITION.

I. SUBMIT ALL SIGNS WITH SHOP DRAWINGS AND LOCATIONS PER PLANS

FOR APPROVAL OF GRAPHICS AND TEXT PRIOR TO CONSTRUCTION.

PROVIDE FINISHED SAMPLE OF TYPICAL ROOM SIGN W/ INSERT

PRINTED FOR APPROVAL.

GENERAL SHEET NOTES

SHEET KEYNOTES

GRAPHIC SCALE(S)

1/8" = 1'-0"

0 8' 16' 24'4'

SCALE:

PLAN

NORTH

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IG101

IN

T

E R

IO

R

S S

IG

N

A G

E P

L A

N

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SCALE 1/8" = 1'-0"

A1

GROUND FLOOR SIGNAGE PLAN

1. EXTERIOR BUILDING NUMBER SIGN REFER TO ARCHITECTURE

F1/A201 FOR LOCATION

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

Tab 6

S Y

M B

O L

WOMEN 1

HELVETICA NEUE 55 ROMAN, 1-1/2" TACTILE ROOM NUMBER WITH GRADE TWO BRAILLE.

UPPER CASE HELVETICA NEUE 55 ROMAN, 1" CAPITAL LETTER HEIGHT, FLUSH LEFT,

ACCOMPANIED BY GRADE TWO BRAILLE.

ROOM NUMBER:

D2D1

1/4" 8 1/2" 1/4"

9"

E Q

E Q

/8

/8

/2

/4

/4 "1

/8 "1 /4

/2

/4

S Y

M B

O L

MEN 1

1/4" 8 1/2" 1/4"

9"

E Q

E Q

/8

/8

/2

/4

/4 "1

/8 "1 /4

/2

/4

No Smoking Within 50' of Entrance

SERVICE NAME: UPPER CASE HELVETICA

MEDIUM, 5/8" CAPITAL LETTER HEIGHT,

CENTERED, ACCOMPANIED BY GRADE TWO

BRAILLE, WHITE LETTERS AND SYMBOL ON

COLORED BACKGROUND TO MATCH EXTERIOR

BUILDING COLORS.

T O

F L O

O R

3/4" 7 1/2"

3/4"

9"

/4

/8

/8 "3 /8

/8

/8

/8

/8

/8 " 7 /8

/4

/4

/2

/4

TEXT: HELVETICA NEUE 55 ROMAN, 3/4"

INCH CAPITAL LETTER HEIGHT,

CENTERED, TACTILE ROOM

NUMBER ACCOMPANIED BY

GRADE TWO BRAILLE

EXIT3

9"

/4

" 1 /4

/8 "5 /8

/8

9"

HELVETICA NEUE 55 ROMAN, 1-1/2" CAPITAL LETTER HEIGHT,

FLUSH LEFT, TACTILE ROOM NUMBER ACCOMPANIED BY

GRADE TWO BRAILLE

HELVETICA NEUE 55 ROMAN, 3/4" CAPITAL LETTER HEIGHT,

FLUSH LEFT. TACTILE ROOM NAME WITH GRADE TWO

BRAILLE.

NOTE: .i TYPE DESIGNATOR INDICATES INTERIOR MOUNTING

OFFICE

8 1/2"

/2

ROOM NUMBER:

ROOM NAME:

/4

/8

" 3

/4

/4

/8

/8

/4

/8

/2

HELVETICA NEUE 55 ROMAN, 1 1/2" CAPITAL LETTER HEIGHT,

FLUSH LEFT, TACTILE ROOM NUMBER ACCOMPANIED BY

GRADE TWO BRAILLE

PRINTED PAPER INSERT WITH ROOM DESCRIPTION. UPPER

AND LOWER CASE HELVETICA NEUE 55 ROMAN, 3/4" CAPITAL

LETTER HEIGHT, FLUSH LEFT.

ROOM NUMBER:

ROOM NAME:

9"

OFFICE

8 1/2"

/2

/8

/8

/4

/8

/2

/2

/2 "3 /4

/4

PAPER INSERT

9"

HELVETICA NEUE 55 ROMAN, 1-1/2" CAPITAL LETTER HEIGHT,

FLUSH LEFT, TACTILE ROOM NUMBER ACCOMPANIED BY

GRADE TWO BRAILLE

HELVETICA NEUE 55 ROMAN, 3/4" CAPITAL LETTER HEIGHT,

FLUSH LEFT. TACTILE ROOM NAME WITH GRADE TWO

BRAILLE.

CONFERENCE

1/4" 8 1/2" 1/4"

ROOM NUMBER:

ROOM NAME:

" OPEN SLIDING PANEL

VERBIAGE: "OPEN" (LEFT) "IN USE" (RIGHT)

TEXT: HELVETICA NEUE 55 ROMAN, 1/2"

CAPITAL LETTER HEIGHT, CENTERED.

/4

/2

/4

/8

/8

" 5 /8

/4

/4

/8

/2

/2

/2

BUILDING SIGN - EXTERIOR

INDIVIDUAL LETTERS AND NUMBERS

BLACK

HELVETICA NEUE HEAVY FONT, 1'-4" HIGH

REFER TO ARCHITECTURE FOR LOCATION AND MOUNTING HEIGHT.

B403 1

SHEET ID

O H

IO

A

IR

N

A T

IO

N

A L

G U

A R

D

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I D

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

A N

G P

R O

J E

C T

N O

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

D A

T E

M A

R K

D E

S C

R

IP

T

IO

N

T A

S K

O R

D E

R N

O

IG601

IN

T

E R

IO

R

S S

IG

N

A G

E S

C H

E D

U L

E A

N D

D E

T A

IL

S

M A

N S

F

IE

L D

L A

H M

A

IR

N A

T

IO

N A

L G

U A

R D

B A

S E

O

H M

A N

S F

IE

L

D L

A H

M A

IR

N

A T

IO

N

A L

G U

A R

D B

A S

E O

H

J A

C O

B S

G O

V E

R N

M E

N T

S E

R V

IC

E

S M

IC

H

E L S

O N

S R

S

T E

IR

V

IN

E

C

A

M W

A R

R

IN

E R

M W

A L T

E R

S

D P

E A

R S

O N

B E

R N

S T

IN

G

M A

Y

P B

X P

F A

-2

-D

-0

W S

R

F

TYPE B-3 FINAL

R E

P A

IR

B

F

O R

C Y

B E

R

F A

SIGNAGE SCHEDULE

SIGN ROOM NAME

ROOM

NUMBER VERBIAGE

SIGN

TYPE

SIGN

STYLE

S1 BREAK 1002 B403 G EXTERIOR

S2 VESTIBULE 1000 NO SMOKING - REFER TO DETAIL E EXTERIOR

S3 VESTIBULE 1000 EXIT F INTERIOR

S4 BREAK 1002 BREAK A.i INTERIOR

S5 OFFICE 1004 OFFICE A.i INTERIOR

S6 OFFICE 1003 OFFICE A.i INTERIOR

S7 OFFICE 1005 OFFICE A.i INTERIOR

S8 TEF 1006 TEF A.i INTERIOR

S9 LAB A 1007 LAB A A.i INTERIOR

S10 LAB B 1008 LAB B A.i INTERIOR

S11 LAB C 1009 LAB C A.i INTERIOR

S12 MENS 1013 MENS D2 INTERIOR

S13 WOMENS 1012 WOMENS D1 INTERIOR

S14 CIRC 1011 EXIT F INTERIOR

S15 CONFERENCE 1014 CONFERENCE C INTERIOR

S16 CONFERENCE 1015 CONFERENCE C INTERIOR

S17 VESTIBULE 1000 SECURITY A.i INTERIOR

S21 ELEC 1019 ELECTRICAL A EXTERIOR

S24 FIRE RISER 1018 FIRE RISER A EXTERIOR

S26 TEF 1006 TEF A EXTERIOR

S27 TEF 1006 NO SMOKING - REFER TO DETAIL E EXTERIOR

S30 CIRC 1011 NO SMOKING - REFER TO DETAIL E EXTERIOR

SCALE NTS

C1

RESTROOM IDENTIFICATION SIGN D

SCALE 3" = 1'-0"

C4

REGULATORY SIGN E

SCALE NTS

C6

EXIT DOOR TACTILE IDENTIFICATION SIGN F

SCALE 3" = 1'-0"

A1

PERMANENT ROOM IDENTIFICATION SIGN A

SCALE 3" = 1'-0"

A4

ROOM IDENTIFICATION SIGN B

SCALE 3" = 1'-0"

A6

CONFERENCE IDENTIFICATION SIGN C

SCALE 1/2" = 1'-0"

F1

EXTERIOR BUILDING NUMBER G

L I C

ENS ED ARCH I T EC

T

STA T E O F O H IO

DONALD

WINSTEAD

Tab 8

4 2 1

A

B

C

D

LAB C

CIRC

WOMENS

MENS

CONFERENCE

CONFERENCE

SECURITY

VESTIBULE

BREAK

FIRE RISER

ELEC

OFFICE

OFFICE

OFFICE

LAB A

1007LAB B

CIRCULATION

OPEN

OFFICE

EQ

EQ

EQ EQ

EQ

EQ

EQ

EQ

EXP

11'-0" A.F.F.

EXP

EXP EXP

10'-0" A.F.F.10'-0" A.F.F.

41'-0" 6'-4" 48'-0"

95'-4"

'-8

'-8

'-0

'-4

EXP EXP

VARIES

EXP

EQ EQ EQ EQ

A4 A-502

TEF

EXP

EXP

EXP

EXP

EXP

EXP

TYP.

8"

TY

P

1' -2

TYP

1'-0"

EQ EQ EQ EQ EQ EQ

'-4

'-8

'-8

'-0

1' -7

2'-0"2' -0

3'-9"

3"

2'-0"

2' -0

3'-9"

EXP EXP

9'-0" 9'-0"

A7 A-401

A5 A-401

A7 A-401

SIM

A.

B.

C.

D.

E.

F.

G.

H.

I.

J.

K.

L.

REFERENCE PLUMBING, MECHANICAL AND ELECTRICAL DRAWINGS FOR ALL VENTS,

GRILLES, REGISTERS, DUCTS, LIGHT, DETECTORS, ETC AND COORDINATE SAME AS

REQUIRED.

CONTRACTOR SHALL COORDINATE ALL PLUMBING, MECHANICAL, AND ELECTRICAL

WORK WITH CEILING HEIGHTS AND ARCHITECTURAL WORK. WHERE CEILINGS

OCCURS, COORDINATE FINAL LOCATIONS WITH ARCHITECT.

REFERENCE ROOM FINISH SCHEDULE FOR CEILING MATERIAL AND FINISHES.

ALL CEILING MOUNTED OR RECESSED ITEMS SUCH AS HEADS, GRILLES, LIGHTS,

ETC CENTERED IN THE LAY-IN PANELS. WHERE GYPSUM BOARD CEILINGS OCCUR,

INSTALL IN A CONSISTENT PATTERN.

FOR TYPICAL LAYOUT, SPLAY AND FIXTURE WIRING, HANGER WIRE AND

COMPRESSION STRUT, SEE DETAILS ON DRAWING A-515.

ALL CEILING GRIDS SHALL BE CENTERED WITHIN EACH SPACE, UNO.

ALL EXPOSED STRUCTURES AND UTILITIES VISIBLE FROM ANY POINT IN THE

USABLE SPACE SHALL BE PAINTED (OTS-A), UNO.

FINISH AND PAINT (GYP-1) EXPOSED GYPSUM BOARD AT UNDERSIDE OF ROOF

STRUCTURE.

CONTROL JOINTS IN INTERIOR CEILINGS WITHOUT PERIMETER RELIEF SHALL BE

INSTALLED SO THAT LINEAR DIMENSIONS BETWEEN CONTROL JOINTS DO NOT

EXCEED 30 FT AND TOTAL AREA BETWEEN CONTROL JOINTS DOES NOT EXCEED

900 SQ FT.

RF SHEILD ENCLOSURE AT UNDERSIDE OF EXISTING JOIST TO FOLLOW

STRUCTURE.

PROVIDE CEILING ACCESS PANELS PER SPECIFICATIONS, UNO.

ALL SUSPENDED ITEMS INSTALLED BELOW THE STC AND RF BARRIER AT THE

UNDERSIDE OF ROOF STRUCTURE MUST BE INSTALLED ON A STRUCTURAL CEILING

GRID SUPPORT ATTACHED TO STRUCTURAL STEEL.

GYPSUM BOARD CEILING AS

SCHEDULED

LIGHT FIXTURE; REFER TO ELECTRICAL

EXHAUST GRILL; REFER TO

MECHANICAL

EXIT LIGHT FIXTURE; REFER TO

ELECTRICAL

SUSPENDED ACOUSTICAL CEILING

BAFFLES WITH INTEGRAL LED

LIGHTING. 8'-6" A.F.F UNLESS…