S-DASOBO-00015003 ODF Santiam Fire & Administrative Buildings Page 1 of 3

Substitution Requests #5 Requests submitted before 1/28/2026 by 8:00am

Invitation to Bid # S-DASOBO-00015003

ODF Fire and Administration Buildings

Request #1:

Belden connecting hardware

Decision:

Approved

Request #2:

Section 27 1300 (Page 5 Paragraph 2.1 A-C) Coming or Panduit fiber backbone cable, termination hardware and patch cords products

Leviton Network Solutions fiber cable, termination hardware & patch cords

Decision:

Approved

Request #3:

08 7100 (Page 6 Paragraph 2.5B) Ives Continuous Hinges

Best 661/662HD Continuous Aluminum Geared Hinges

Decision:

Approved

Request #4:

Section 7100 (Page 7 Paragraph 2.5G) Von Duprin 35A/98

Precision 2000 Series Rim Exit Devices

Decision:

Denied – Does not meet the State of Oregon hardware standards

S-DASOBO-00015003 ODF Santiam Fire & Administrative Buildings Page 2 of 3

Request #5:

Section 08 7100 (Page 7 Paragraph 2.5E) Schlage L9000

40H Mortise Series by Best

Decision:

Denied – Does not meet the State of Oregon hardware standards

Request #6:

Section 08 7100 (Page 7 Paragraph 2.5Q) Schlage Electronics PS902

RCI DKPS Power Supply Electronic Access

Decision:

Approved

Request #7:

Section 08 7100 (Page 6 Paragraph C) Securitron CEPT

Best (Precision) EPT Electrical Power Transfer

Decision:

Approved

Request #8:

Section 08 7100 (Page 7 Paragraph 2.5 M) Glynn-Johnson 90S & 100S

Dorma 700/900 Series – Stops and Holders

Decision:

Approved

Request #9:

Section 08 7100 (Page 7 Paragraph 2.5H) LCN 4040XP

QDC100 Series Door Closers

Decision:

Denied – Does not meet the State of Oregon hardware standards

S-DASOBO-00015003 ODF Santiam Fire & Administrative Buildings Page 3 of 3

Request #10:

Section 08 3600 (Page Paragraph 2.2) Sectional Doors

Raynor – AlumaView – AV200

Decision:

Denied

1. Per the current energy code, our Comcheck references ASHRE 90.1 2019 versus

ASHRE 90.1 2007.

2. Our ComCheck uses the baseline prescriptive U-value of 0.31 for non-swinging doors. Thus the Reynor substitution request is rejected as it doesn't meet Energy Code Requirements noted below.

5.5 Prescriptive Building Envelope Compliance Path Table 5.5-4 Building Envelope Requirements for Climate Zone 4 Non-Residential, Non-Swinging – U-0.31

Product documentation to approved substitution requests attached

END OF SUBSTITUTION REQURESTS #5

SUBSTITUTION

REQUEST

(During the Bidding Phase)

Project: ODF Santiam Fire & Administration Buildings

To: LRS Architects

Re: Belden Cabling Products

Substitution Request Number: 1

From: Rick Oakes, Certified Systems LLC

Date: 1/19/26

A/E Project Number:

Contract For:

Specification Title: 27 15 00 Description: Products

Section: 2.1 (a,b,c,d,e) Page: Article/Paragraph:

Proposed Substitution: Belden cabling is approved. I am requesting approval for Belden termination hardware (jacks & patch panels)

Manufacturer: Belden Address: Phone:

Trade Name: Model No.:

Attached data includes product description, specifications, drawings, photographs, and performance and test data adequate for evaluation of the request; applicable portions of the data are clearly identified.

Attached data also includes a description of changes to the Contract Documents that the proposed substitution will require for its proper installation.

The Undersigned certifies:

• Proposed substitution has been fully investigated and determined to be equal or superior in all respects to specified product.

• Same warranty will be furnished for proposed substitution as for specified product.

• Same maintenance service and source of replacement parts, as applicable, is available.

• Proposed substitution will have no adverse effect on other trades and will not affect or delay progress schedule.

• Proposed substitution does not affect dimensions and functional clearances.

• Payment will be made for changes to building design, including A/E design, detailing, and construction costs caused by the substitution.

Submitted by: Rick Oakes, RCDD, CET Nicet Level IV Fire alarm Systems

Signed by:

Firm: Certified Systems LLC

Address: P.O. Box 215

Junction City, Oregon 97448

Telephone: 541.343.1608

A/E’s REVIEW AND ACTION

Substitution approved - Make submittals in accordance with Specification Section 01330.

Substitution approved as noted - Make submittals in accordance with Specification Section 01330.

Substitution rejected - Use specified materials.

Substitution Request received too late - Use specified materials.

Signed by: Date:

Supporting Data Attached: Drawings X Product Data Samples Tests Reports

© Copyright 1996, Construction Specifications Institute, 99 Canal Center Plaza, Suite 300 Alexandria, VA 22314

Page of September 1996 CSI Form 1.5C

Todd Schenbeck - Interface Engineering 01.27.2026 belden.com

Benefits at a Glance

• Reduce installation costs through cost-effective components

connectivity

Key Features

• Cables designed for familiar punch-down termination with DataConnect Jacks

• DataConnect Jacks and Patch Panels compatible with keystone footprint

Key Applications

The Cost-Effective, Standards-Compliant Cabling System

The DataConnect System is cost-effective while also meeting performance standards for typical voice and data applications in various markets, including K-12, multi-site retail and government.

The product family includes keystone-style RJ45 jack modules, pre-loaded patch panels, patch cords and horizontal cabling options for Category 5e, Category 6 and Category 6A systems.

DataConnect System

PRODUCT BULLETIN

https://www.belden.com/

DataConnect Cables

Description Category 5e Category 6 Category 6A

DataConnect Cables, UTP, Plenum-CMP

Blue 1000 ft (305 m) 1585A D15U1000 D6UP D15U1000 DAUP D151000

Gray 1000 ft (305 m) 1585A 008U1000 D6UP 008U1000 DAUP 0081000

White 1000 ft (305 m) 1585A 009U1000 D6UP 009U1000 DAUP 0091000

Black 1000 ft (305 m) 1585A 010U1000 D6UP 010U1000 DAUP 0101000

DataConnect Cables, UTP, Riser-CMR

Blue 1000 ft (305 m) 1583A 006U1000 D6UR 006U1000 DAUR 0061000

Gray 1000 ft (305 m) 1583A 008U1000 D6UR 008U1000 DAUR 0081000

White 1000 ft (305 m) 1583A 009U1000 D6UR 009U1000 DAUR 0091000

Black 1000 ft (305 m) 1583A 010U1000 D6UR 010U1000 DAUR 0101000

DataConnect Cables, F/UTP, Plenum-CMP

Blue 1000 ft (305 m) D5FP D151000 D6FP D151000 DAFP D151000

Gray 1000 ft (305 m) D5FP 0081000 D6FP 0081000 DAFP 0081000

White 1000 ft (305 m) D5FP 0091000 D6FP 0091000 DAFP 0091000

Black 1000 ft (305 m) D5FP 0101000 D6FP 0101000 DAFP 0101000

DataConnect Cables, F/UTP, Riser-CMR

Blue 1000 ft (305 m) D5FR 0061000 D6FR 0061000 DAFR 0061000

Gray 1000 ft (305 m) D5FR 0081000 D6FR 0081000 DAFR 0081000

White 1000 ft (305 m) D5FR 0091000 D6FR 0091000 DAFR 0091000

Black 1000 ft (305 m) D5FR 0101000 D6FR 0101000 DAFR 0101000

Other colors available, please contact us for more information.

DataConnect Patch Cords

Description Category 5e Category 6 Category 6A

DataConnect Cables, UTP, Nonbonded-Pair, T568A/B, CM

Blue 3 ft (0.91 m) C543106003 C643106003 CA43106003

5 ft (1.52 m) C543106005 C643106005 CA43106005

7 ft (2.13 m) C543106007 C643106007 CA43106007

10 ft (3.05 m) C543106010 C643106010 CA43106010

Gray 3 ft (0.91 m) C543108003 C643108003 CA43108003

5 ft (1.52 m) C543108005 C643108005 CA43108005

7 ft (2.13 m) C543108007 C643108007 CA43108007

10 ft (3.05 m) C543108010 C643108010 CA43108010

White 3 ft (0.91 m) C543109003 C643109003 CA43109003

5 ft (1.52 m) C543109005 C643109005 CA43109005

7 ft (2.13 m) C543109007 C643109007 CA43109007

10 ft (3.05 m) C543109010 C643109010 CA43109010

Black 3 ft (0.91 m) C543100003 C643100003 CA43100003

5 ft (1.52 m) C543100005 C643100005 CA43100005

7 ft (2.13 m) C543100007 C643100007 CA43100007

10 ft (3.05 m) C543100010 C643100010 CA43100010

Other colors available, please contact us for more information.

DataConnect Patch Panels

Description Category 5e Category 6 Category 6A

DataConnect Patch Panel, Flat, 24-Port, 1U (Preloaded) DC5PPF1U24BK DC6PPF1U24BK DCAPPF1U24BK

DataConnect Patch Panel, Flat, 48-Port, 2U (Preloaded) DC5PPF2U48BK DC6PPF2U48BK DCAPPF2U48BK

Ordering Information

DataConnect Jacks

Description Category 5e Category 6 Category 6A

Single Bulk Single Bulk Single Bulk

Black DC5MJKUBK-S1 DC5MJKUBK-B24 DC6MJKUBK-S1 DC6MJKUBK-B24 DCAMJKUBK-S1 DCAMJKUBK-B24

Electrical White DC5MJKUEW-S1 DC5MJKUEW-B24 DC6MJKUEW-S1 DC6MJKUEW-B24 DCAMJKUEW-S1 DCAMJKUEW-B24 Gray DC5MJKUGY-S1 DC5MJKUGY-B24 DC6MJKUGY-S1 DC6MJKUGY-B24 DCAMJKUGY-S1 DCAMJKUGY-B24 Purple DC5MJKUPR-S1 DC5MJKUPR-B24 DC6MJKUPR-S1 DC6MJKUPR-B24 DCAMJKUPR-S1 DCAMJKUPR-B24 Red DC5MJKURD-S1 DC5MJKURD-B24 DC6MJKURD-S1 DC6MJKURD-B24 DCAMJKURD-S1 DCAMJKURD-B24 Yellow DC5MJKUYL-S1 DC5MJKUYL-B24 DC6MJKUYL-S1 DC6MJKUYL-B24 DCAMJKUYL-S1 DCAMJKUYL-B24 Blue DC5MJKUBL-S1 DC5MJKUBL-B24 DC6MJKUBL-S1 DC6MJKUBL-B24 DCAMJKUBL-S1 DCAMJKUBL-B24 Green DC5MJKUGN-S1 DC5MJKUGN-B24 DC6MJKUGN-S1 DC6MJKUGN-B24 DCAMJKUGN-S1 DCAMJKUGN-B24 Ivory DC5MJKUIV-S1 DC5MJKUIV-B24 DC6MJKUIV-S1 DC6MJKUIV-B24 DCAMJKUIV-S1 DCAMJKUIV-B24

Orange DC5MJKUOR-S1 DC5MJKUOR-B24 DC6MJKUOR-S1 DC6MJKUOR-B24 DCAMJKUOR-S1 DCAMJKUOR-B24 DataConnect Shielded Jacks

Shielded DC5MJKSME-S1 DC5MJKSME-B24 DC6MJKSME-S1 DC6MJKSME-B24 DCAMJKSME-S1 DCAMJKSME-B24

Available in single (-S1) or bulk (-B24) packaging.

© 2024 | Belden and its affiliated companies claim and reserves all rights to its graphic images and text, trade names and trademarks, logos, service names, and similar proprietary marks, and any other intellectual property rights associated with this publication. BELDEN® and other distinctive identifiers of Belden and its affiliated companies as used herein are or may be pending or registered or unregistered trademarks of Belden, or its affiliates, in the United States and/or other jurisdictions throughout the world. Belden’s trade names, trademarks, logos, service names, and similar proprietary marks shall not be reprinted or displayed without Belden’s or its affiliated companies’ permission and/or in any form inconsistent with Belden's business interests. Belden reserves the right to demand the discontinuation of any improper use at any time.

DATACONNECT-SYSTEM-PB359-2024-05-EN belden.com https://www.belden.com

ODF Santiam Fire & Administrative Buildings

LRS Architects, Portland OR- Attn: Michelle Startt

271300 5 2.1/A-C Communications Backbone Cabling, Products

Leviton Network Solutions fiber cable, termination hardware & patch cords

Corning or Panduit fiber backbone cable, termination hardware and patch cords

Xtreme Communications Inc, Xtreme Communications Inc, 24023 NE Shea Lane #215

Wood Village, OR 97060

1/19/2026

503-710-1480 503-618-9985

Tim Schnell products

Todd Schenbeck - Interface Engineering 01.26.2026

No exceptions taken.

Copyright © 2023 Leviton Manufacturing Co., Inc. All rights reserved.

Leviton reserves the right to modify product specifications without notice. Revised August 2023

APPLICATION

ADVENTUM ARMOR-TEK products consist of indoor/outdoor rated fiber optic loose tube cables encased in an aluminum, spirally wrapped armor in an interlocking configuration. The armored cable is then covered with a plenum rated jacket to prevent snags during installation. ARMOR-TEK fiber cables can be used in any of the following installation enviroments:

indoor/outdoor, in backbones, between closets and in fiber to the desk. ARMOR-TEK is a viable and cost effective solution for applications where a pathway is beyond its full ratio, for areas where extra physical security is a concern, in fast track installations, between buildings, and in trays.

Leviton recommends installation procedures per ANSI/TIA- 758, customer-owned outside plant telecommunications infrastructure standard.

BENEFITS

—up to 25%

than conduit

• Can be installed in campus environments due to the durability and indoor/outdoor rating of the cable

Indoor/Outdoor Plenum ADVENTUM™ with ARMOR-TEK™ (LTPK)

Indoor/O utdoor Plenum

A D

VEN

TU

M w ith A R

M O

R

-TEK

(LTPK

FEATURES

• Loose tube cable constructions (up to 432 optical fibers) with aluminum interlock armor and an overall plenum flame rated jacket

armoring process

innerduct or conduit

plant environments

• Available Harsh Environment (HE) cables offer superior resistance to chemicals and fuels for petro-chemical, industrial, and airport installations

• Armor provides protection from crush and rodent attacks

STANDARDS & REGULATIONS

NFPA 130; NFPA 262; Telcordia GR-409

• ETHERNET: 10BASE – 400GBASE (10BASE,

100BASE, 1000BASE, 10GBASE, 40GBASE,

100GBASE, 400GBASE)

• Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)

WDM-PON, NG-PON

COUNTRY OF ORIGIN

USA

WARRANTY INFORMATION

For Leviton product warranties, go to leviton.com/ns/warranty

H23 SS4015-US ENv4

PRODUCT SPECIFICATIONS

Indoor/Outdoor Plenum ADVENTUM with ARMOR-TEK (LTPK)

For up to 12 fiber cables

For fiber counts from 24-432

Spec Sheet Footer

USA

Network Solutions Headquarters +1 (800) 722 2082 infoUSA@leviton.com

Leviton Cable (formerly Berk-Tek) +1 (800) 237 5835 | infoUSA@leviton.com

Asia Pacific +852 3620 2602 infoAPAC@leviton.com

Canada +1 (800) 461 2002 infoCanada@leviton.com

Europe +44 (0) 1592 772124 infoEurope@leviton.com

Latin America

MX: +52 (55) 2128 6286

LATAM: +52 (55) 2333 5963

infoLATAM@leviton.com

Middle East & Africa +971 (4) 247 9800 infoMEA@leviton.com

NETWORK SOLUTIONS PRODUCTS ARE AVAILABLE WORLDWIDE IN OVER 100 COUNTRIES. VISIT US ONLINE AT LEVITON.COM/NS TO LEARN MORE.

Revised August 2023

Copyright © 2023 Leviton Manufacturing Co., Inc. All rights reserved.

Leviton reserves the right to modify product specifications without notice.

For further support information, visit leviton.com/ns/support

Indoor/O utdoor Plenum

A D

VEN

TU

M w ith A R

M O

R

-TEK

(LTPK

H23 SS4015-US ENv4

PRODUCT SPECIFICATIONS

Indoor/Outdoor Plenum ADVENTUM™ with ARMOR-TEK™ (LTPK)

CHARACTERISTICS

Construction

Type of cable Loose Tube

Jacket material Plenum

Usage Characteristics

Temperature (Operating): -40 °C to +75 °C

Temperature (Installation): -20 °C to +60 °C

Temperature (Storage): -60 °C to +85 °C

TECHNICAL DATA - PHYSICAL

Fiber Part Number Prefix Diameter Weight

Min. Bend Radius Max. Loading

Install Long Term Install Long Term

in. mm lb./kft kg/km in. cm in. cm lbf. N lbf. N

6 LTPK006 0.620 15.7 136 202 9.3 23.6 6.2 15.7 150 667 45 200

12 LTPK012 0.620 15.7 136 202 9.3 23.6 6.2 15.7 300 1335 90 400

12 LTPK12B012 0.730 18.5 184 274 11.0 27.8 7.3 18.5 300 1335 90 400

24 LTPK12B024 0.730 18.5 184 274 11.0 27.8 7.3 18.5 300 1335 90 400

48 LTPK12B048 0.730 18.5 185 275 11.0 27.8 7.3 18.5 300 1335 90 400

72 LTPK12B072 0.774 19.7 220 327 11.6 29.5 7.7 19.7 600 2670 200 890

96 LTPK12B096 0.851 21.6 247 368 12.8 32.4 8.5 21.6 600 2670 200 890

144 LTPK12B144 1.004 25.5 359 535 15.1 38.3 10.0 25.5 1000 4448 300 1335

288 LTPK12B288 1.148 29.2 538 801 17.2 43.7 11.5 29.2 1000 4448 300 1335

432 LTPK12B432 1.295 32.9 644 958 19.4 49.3 13.0 32.9 1000 4448 300 1335

FIBER DATA AND SHEATH COLORS

Fiber Type

Part Number Suffix

Leviton Fiber Core Size Wavelength

(nm) Maximum

Attenuation (dB/km)

Effective Modal

Bandwidth @ 850 nm (MHz•km)

Distance (meters)

Sheath Color

Multimode - 62.5 µm Standard, and 50 µm Bend Insensitive 1 GbE 10 GbE 40 GbE 100 GbE

OM1 CB3510/25 CB 62.5 µm 850/1300 3.5/1.0 200 300 33 N/A N/A Orange

OM3 EB3010/25 EB 50 µm 850/1300 2.8/0.8 2000 1000 300 100 70 Aqua

OM4 FB3010/F5 FB 50 µm 850/1300 2.8/0.8 4700 1040 550 150 100 Aqua

OM4+ XB3010/X5 XB 50 µm 850/1300 2.8/0.8 4900 1210 600 300 150 Violet

WideBand Multimode - Bend Insensitive 1 GbE 10 GbE 40 GbE 100 GbE

OM5 WB3010/W5 WB 50 µm 850-953/1300 2.8/0.8 4700 1040 550 190 100 Lime Green

Single-mode Bend Insensitive - ITU-T G.652.D and G.657.A1 Compliant 1 GbE 10 GbE 40 GbE 100 GbE

OS2 AB0403 AB SMF 1310/1550 0.4/0.3 N/A ≥ 5000 ≥ 10000 ≥ 10000 ≥ 10000 Yellow

Leviton reserves the right to modify product specifications without notice. Revised January 2023

APPLICATION

The OPT-X 1000i SDX Rack-Mount Enclosure allows for inter-connect or cross-connect between backbone cable and active equipment while using minimum rack space in a frame or cabinet setting. The enclosure's features and design allow for easy field termination of connectors, splicing, or pre-terminated plug-and-play solutions. The fiber enclosure is primarily used in data centers, equipment rooms, and telecommunication rooms.

SPECIFICATION

Fiber enclosure shall be available in 1RU, 2RU, 3RU, and 4RU versions to accommodate termination and splicing of fiber. A removable sliding tray shall also be available in 1RU and 2RU enclosures. Adapter bulkhead shall accept SC, LC, ST, and MTP® adapters, and Plug-n-Play MTP cassettes.

4RU enclosures shall accommodate up to 15 adapter plates for 360 fiber connections. Fiber cable management for routing, storage, and protection shall accept patch cords, tight-buffer fiber, and backbone cables. Rear fiber cable management rings shall be stackable and configurable in quarter-, half-, or full-ring arrangements. Enclosure shall be constructed of 16-gauge steel with a powder-coated black finish and be mountable in either a 19-inch or 23-inch rack or cabinet frame. An optional locking door feature shall be available.

OPT-X™ 1000i SDX Rack-Mount Enclosures 1RU, 2RU, 3RU, & 4RU

5R xU

M -xxx

FEATURES

• 15-inch depth for high-density fiber termination and/or splicing

• Stackable and adjustable fiber rings simplify cable organization

interior of the enclosure

• Removable rubber grommet allows for pre-terminated fiber trunk install, protects cable, and minimizes dust build-up

• Sliding tray (an option in 1RU and 2RU enclosures) glides forward and backward for front and rear bulkhead access after installation, and removes completely from enclosure for ease of field terminations and splicing

for higher-density applications using HDX MTP® Cassettes or HDX Adapter Plates (sliding tray does not accommodate splice trays)

• Convert to HDX cassettes or adapter plate using conversion bracket (sold separately)

DESIGN CONSIDERATIONS

• Accepts SDX adapter plates, splice modules and/or cassettes

• Optional cable strain-relief mounting kit (for installation on side of enclosure or on rack post)

• 19-inch or 23-inch enclosure rack-mount option

(23-inch 1RU mounting bracket sold separately)

• Protrudes 4.5 inches from mounting ears to align with

Leviton VERSI-DUCT™ Cable Management System

• Capable of storing up to 3 meters of 900 μm tight-buffered fiber per adapter

• Adapter plate on 3RU/4RU orients horizontally or vertically for optimal density

ties, mounting screws, ID label, and spiral wrap (for cable protection on units with a sliding tray)

STANDARDS & REGULATIONS

• ANSI/TIA-568.3-D

COUNTRY OF ORIGIN

Mexico

WARRANTY INFORMATION

For Leviton product warranties, go to leviton.com/ns/warranty

A23 SS1034-GL ENv3

PRODUCT SPECIFICATIONS

5RxUM-xxx

Leviton reserves the right to modify product specifications without notice. Revised January 2023

5R xU

M -xxx

A23 SS1034-GL ENv3

PRODUCT SPECIFICATIONS

5RxUM-xxx

MECHANICAL SPECIFICATIONS

DENSITY

Rack Unit Fibers SDX Adapter Plates, Splice Modules or MTP® Cassettes Splice Trays

1RU 72 Up to 3 Up to 3

2RU 144 Up to 6 Up to 6

3RU 216 Up to 9 (horizontal adapter plate/module orientation) Up to 12

3RU 288 Up to 12 (vertical adapter plate/module orientation) Up to 12

4RU 288 Up to 12 (vertical adapter plate/module orientation) Up to 12

4RU 360 Up to 15 (horizontal adapter plate/module orientation) Up to 12

1.72"

19.00"

17.47" 15.78"

19.00"

3.47"

17.47" 15.78"

19.00"

3.47"

17.47" 15.78"

19.00"

5.22"

17.47" 15.78"

19.00"

6.97"

17.47" 15.78"15.78"

19.00"

5.22"

17.47" 15.78"

15.78"

19.00"

48.26 cm

19.00"

48.26 cm

19.00"

48.26 cm

19.00"

48.26 cm

17.47"

44.37 cm

17.47"

44.37 cm

17.47"

44.37 cm

17.47"

44.37 cm

1.72" | 4.37 cm

3.47" | 8.81 cm

5.22" | 13.26 cm

6.97" | 17.70 cm

15.78"

40.08 cm

15.78"

40.08 cm

15.78"

40.08 cm

15.78"

40.08 cm

Network Solutions Headquarters +1 (800) 722 2082 infoUSA@leviton.com

Leviton Berk-Tek Cable: +1 (800) 237 5835 berktek.info@leviton.com

Asia Pacific +852 3620 2602 infoAPAC@leviton.com

Canada +1 (800) 461 2002 infoCanada@leviton.com

Europe +44 (0) 1592 772124 infoEurope@leviton.com

Latin America

MX: +52 (55) 2128 6286

LATAM: +52 (55) 2333 5963

infoLATAM@leviton.com

Middle East & Africa +971 (4) 247 9800 infoMEA@leviton.com

NETWORK SOLUTIONS PRODUCTS ARE AVAILABLE WORLDWIDE IN OVER 100 COUNTRIES. VISIT US ONLINE AT LEVITON.COM/NS TO LEARN MORE.

Revised January 2023 Copyright © 2023 Leviton Manufacturing Co., Inc. All rights reserved.

Leviton reserves the right to modify product specifications without notice.

For further support information, visit leviton.com/ns/support

5R xU

M -xxx

A23 SS1034-GL ENv3

PRODUCT SPECIFICATIONS

5RxUM-xxx

OPT-X™ 1000i SDX RACK-MOUNT ENCLOSURES Description Part No.

1RU Enclosure, Empty 5R1UM-F03

1RU Enclosure, Empty, with sliding tray 5R1UM-S03

2RU Enclosure, Empty 5R2UM-F06

2RU Enclosure, Empty, with sliding tray 5R2UM-S06

3RU Enclosure, Empty 5R3UM-F09

3RU Enclosure, Empty 5R3UM-F12

4RU Enclosure, Empty 5R4UM-F12

4RU Enclosure, Empty 5R4UM-F15 Enclosure includes an accessory kit which consists of cable ties, mounting screws, ID label, and spiral wrap

(for cable protection on units with sliding tray)

ACCESSORIES

Description Part No.

Retrofit Sliding Tray, 2U (for use with HDX Cassettes/Plates) 5R2UR-TRY

Retrofit Sliding Tray, 1U (for use with HDX Cassettes/Plates) 5R1UR-TRY

Universal Cable Clamp Kit, single cable grommet (for enclosure mounting) 5RCMP-KIT

Universal Cable Clamp Kit, multiple cable grommet (for enclosure mounting) 5RCMP-KT2

Universal Cable Clamp Kit (for rack post mounting) 5RCMR-KIT

Universal 0 RU Patch Cord Managers 5RCMT-VFG

HDX to SDX Adapter Bracket HDXAD-ACC

Fiber Cable Management ¼ Round Ring Kit (bag of four) 5R100-14R*

1RU Enclosure 23” Rack and Cabinet Mounting Bracket 5R1RU-023

Lock and Key 5L000-KAL

* Not for use in Retrofit Sliding Tray

DENSITY USING RETRO-FIT SLIDING TRAY

Rack Unit Fibers HDX Adapter Plate, Splice Module or MTP® Cassettes

1RU 96 Up to 8

2RU 192 Up to 16

MTP® is a registered trademark of US Conec, Ltd.

Santoprene® is a registered trademark of Exxon Mobil Corporation

Leviton reserves the right to modify product specifications without notice. Revised December 2023

K23 SS1129 ENv2

5F100-xxx (precision m olded)

PRODUCT SPECIFICATIONS

5F100-xxx (precision molded)

APPLICATION

Leviton SDX Fiber Adapter Plates are used in conjunction with SDX panels or enclosures (rack- or wall-mount) to provide a means to connect backbone to backbone or backbone to horizontal fiber cabling. The SDX Fiber Adapter Plates are offered in LC, SC, and ST versions.

The SDX adapter plate shall be modular and functional for use in an SDX panel or enclosure (rack- or wall-mount). The adapter plate shall be offered in LC, SC, and ST styles in 6-, 12-, or 24-fiber configurations. The adapter plate shall be compliant to ANSI/TIA-568.3-E (for performance) and respective ANSI/TIA-604-X (for intermateability) standards.

Adapter plates shall use zirconia ceramic sleeves and be offered in standard fiber type colors pursuant to ANSI/TIA-568.3-E standards. The LC and SC adapters and plate shall be integrated to eliminate “rattle” and loose fit.

Adapter plates shall be TAA compliant.

OPT-X™ SDX Fiber Adapter Plates — Precision Molded

FEATURES & BENEFITS

• �Integrated LC and SC plates (two pieces) eliminates rattling and loose fit

• �Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds

(rack- or wall-mount)

DESIGN CONSIDERATIONS

• �Arrange adapter plates within panel or enclosure to allow for future growth

adapter plates for highest density per RU

• �Zirconia ceramic sleeve typically used on laser optimized multimode and single-mode applications

(OM3, OM4, OS2)

• Dust plugs or caps are installed in adapters on final assembly

for connector intermateability

MECHANICAL SPECIFICATIONS

LC, SC, blank plates: USA ST plates: Taiwan

For Leviton product warranties, go to Leviton.com/NS/Warranty

5F100-2LC

5F100-2VC

5F100-2QC

5F100-6IC

5F100-6VC

5F100-6QC

5F100-2IC

5F100-2VL

5F100-2LL

5F100-2IL

5F100-2QL

5F100-4IL

5F100-4LL

5F100-4QL

5F100-6MT

5F100-8MT5F100-PLT

5F100-6LC

Leviton reserves the right to modify product specifications without notice. Revised December 2023

K23 SS1129 ENv2

5F100-xxx (precision m olded)

PRODUCT SPECIFICATIONS

5F100-xxx (precision molded)

Spec Sheet Footer

USA

Network Solutions Headquarters +1 (800) 722 2082 infoUSA@leviton.com

Leviton Cable (formerly Berk-Tek) +1 (800) 237 5835 | infoUSA@leviton.com

Asia Pacific +852 3620 2602 infoAPAC@leviton.com

Canada +1 (800) 461 2002 infoCanada@leviton.com

Europe +44 (0) 1592 772124 infoEurope@leviton.com

Latin America

MX: +52 (55) 2128 6286

LATAM: +52 (55) 2333 5963

infoLATAM@leviton.com

Middle East & Africa +971 (4) 247 9800 infoMEA@leviton.com

NETWORK SOLUTIONS PRODUCTS ARE AVAILABLE WORLDWIDE IN OVER 100 COUNTRIES. VISIT US ONLINE AT LEVITON.COM/NS TO LEARN MORE.

For further support information, visit Leviton.com/NS/Support

PART NUMBERS

Description Part No.

Plate (beige), 62.5 µm MM (OM1), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2IL

Plate (aqua), 50 µm LOMM (OM3 & OM4), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2QL

Plate (blue), SM (OS2), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2LL

Plate (green), SM (OS2), Duplex LC/APC, 12-fiber, zirconia ceramic sleeve 5F100-2VL

Plate (beige), 62.5 µm MM (OM1), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4IL

Plate (aqua), 50 µm LOMM (OM3 & OM4), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4QL

Plate (blue), SM (OS2), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4LL

Plate (green), SM (OS2), Quad LC/APC, 24-fiber, zirconia ceramic sleeve 5F100-4VL

Plates (beige), 62.5 µm MM (OM1), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6IC

Plates (aqua), 50 µm MM (OM3 & OM4), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6QC

Plates (blue), SM (OS2), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6LC

Plates (green), SM (OS2), Duplex SC/APC, 6-fiber, zirconia ceramic sleeve 5F100-6VC

Plate (beige), 62.5 µm MM (OM1), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2IC

Plate (aqua), 50 µm LOMM (OM3 & OM4), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2QC

Plate (blue), SM (OS2), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2LC

Plate (green), SM (OS2), Duplex SC/APC, 12-fiber, zirconia ceramic sleeve 5F100-2VC

Plate (black), ST MM/SM, 6-fiber, zirconia ceramic sleeve 5F100-6MT

Plate (black), ST MM/SM, 8-fiber, zirconia ceramic sleeve 5F100-8MT

Plate (black), blank 5F100-PLT

125.5 mm [4.94"]

114.3 mm [4.50"]

31.8 mm [1.25"]

Blank style

125.5 mm [4.94"]

114.3 mm [4.50"]

31.8 mm [1.25"]

SC style

114.3 mm [4.50"]

125.5 mm [4.94"]

31.8 mm [1.25"]

LC style

125.5 mm [4.94"]

114.3 mm [4.50"]

31.8 mm [1.25"]

ST style

Copyright © 2025 Leviton Manufacturing Co., Inc. All rights reserved.

Leviton reserves the right to modify product specifications without notice. Revised October 2025

APPLICATION

Leviton Fiber Optic Patch Cords are designed to interconnect or cross connect fiber networks within structured cabling systems. Leviton can produce any standard or custom fiber patch cord to meet your needs, and can offer quick-turn services for fast delivery. Leviton offers two series of patch cords: Premium Series and Economy Series. Premium Series Patch Cords offer higher performance, optional custom labels, and optional 100% interferometer testing. Economy Series Patch Cords are a price-competitive stocked or custom ordered solution that meets or exceeds all industry standards.

Multimode patch cords shall meet an optical return loss equal to or greater than 25 dB per mated pair, and single-mode equal to or greater than 50 dB for UPC polish, or 55 dB for APC polish. Insertion loss shall not exceed 0.3 dB per mated pair for multimode and 0.3 dB for single-mode. The patch cords shall be compliant with ANSI/TIA-568.3.

Economy Series Fiber Optic Patch Cords

Econom y Series Fiber O ptic Patch C ords

FEATURES & BENEFITS

density applications

reseal, saving time during installation

DESIGN CONSIDERATIONS

minimum order quantity and longer lead times. Contact customer service.)

• Standard polarity is A-B

• ANSI/TIA-568.3

USA - OM3, OM4, OS2

China - OM1

For Leviton product warranties, go to Leviton.com/warranty

J25 SS1027-CA-LA-US ENv7

PRODUCT SPECIFICATIONS

Economy Series Fiber Optic Patch Cords

Economy Series LC-LC Duplex, OM4

Leviton reserves the right to modify product specifications without notice. Revised October 2025

Econom y Series Fiber O ptic Patch C ords

PRODUCT SPECIFICATIONS

Economy Series Fiber Optic Patch Cords

COLOR CODES

Cable Jackets

Single-mode (OS2) Yellow

Multimode (62.5/125 µm, OM1) Orange

Laser optimized multimode (50/125 µm, OM3/OM4) Aqua

Connector Body

Single-mode Blue

Single-mode, APC (angle polishing) Green

Multimode (62.5/125 µm) Beige

Multimode (50/125 µm) Beige

Boots (Polarity defined by the following color scheme)

Single-Mode Blue and White

(LCs), Yellow and

White (SCs, STs)

Green (SC/APC)

Multimode Black and Red

PERFORMANCE SPECIFICATIONS (CONT.)

Multimode Single-mode

Insertion Loss 0.30 dB Max 0.30 dB Max

Return Loss ≥ 25 dB ≥ 50 dB (UPC), ≥ 55 dB (APC)

Durability 500 Matings 500 Matings

Repeatability <0.2 dB <0.2 dB

Operating Temp. -20 °C to +70 °C -20 °C to +70 °C

Cable Retention >20lbs / 89 N >20lbs / 89 N

RoHS Yes Yes

PERFORMANCE SPECIFICATIONS

Cable Performance

Fiber Type Maximum Attenuation (db/km) Bandwidth (MHz•km) Transmission Distance (meters)

850nm 1300nm 1310nm 1550nm 850nm 1300nm 100Mb 1GbE 10GbE 40GbE 10GbE

Single-mode (OS2) N/A N/A 0.4 0.3 N/A N/A >5,000 @ 1310nm >10,000 @ 1310nm NA NA

62.5/125 µm MM (OM1) 3.5 1.0 N/A N/A 200 500

300/2000 @ 850/1300nm

300/600 @ 850/1300nm

36/300 @ 850/1300nm NA NA

50/125 µm LO (10G-300m) MM (OM3) 3.0 1.0 N/A N/A 2,0001 5002 1,000/600 @

850/1300nm 300/300 @

850/1300nm 100 @ 850nm

100 @ 850nm

50/125 µm LO (10G-550m) MM (OM4) 3.0 1.0 N/A N/A 4,9001 5002 1,210/600 @

850/1300nm 600/300 @

850/1300nm 150 @ 850nm

150 @ 850nm

1 �The effective modal bandwidth is determined based on an overfill launch (OFL) per ANSI/TIA-455-204, except on laser-optimized fiber types.

2 10GbE transmission @ 1,300 nm only applies to 10GBASE-LX4 (CWDM).

J25 SS1027-CA-LA-US ENv7

Leviton reserves the right to modify product specifications without notice. Revised October 2025

50/125 µm LOMM (OM4) OFNR DUPLEX Description Length (Meters) Duplex

LC-LC 1 54DLC-M01

LC-LC 2 54DLC-M02

LC-LC 3 54DLC-M03

LC-LC 4 54DLC-M04

LC-LC 5 54DLC-M05

LC-LC 6 54DLC-M06

LC-LC 7 54DLC-M07

LC-LC 8 54DLC-M08

LC-LC 9 54DLC-M09

LC-LC 10 54DLC-M10

LC-LC 12 54DLC-M12

LC-LC 15 54DLC-M15

SC-LC 1 54DCL-M01

SC-LC 2 54DCL-M02

SC-LC 3 54DCL-M03

SC-LC 4 54DCL-M04

SC-LC 5 54DCL-M05

SC-LC 10 54DCL-M10

SC-SC 1 54DSC-M01

SC-SC 3 54DSC-M03

SC-SC 4 54DSC-M04

SC-SC 10 54DSC-M10

50/125 µm LOMM (OM3) OFNR DUPLEX Description Length (Meters) Duplex

SC-SC 1 5LDSC-M01

SC-SC 2 5LDSC-M02

SC-SC 3 5LDSC-M03

SC-SC 5 5LDSC-M05

SC-SC 10 5LDSC-M10

LC-LC 1 5LDLC-M01

LC-LC 2 5LDLC-M02

LC-LC 3 5LDLC-M03

LC-LC 4 5LDLC-M04

LC-LC 5 5LDLC-M05

LC-LC 7 5LDLC-M07

LC-LC 9 5LDLC-M09

LC-LC 10 5LDLC-M10

LC-LC 12 5LDLC-M12

LC-LC 15 5LDLC-M15

SC-LC 1 5LDCL-M01

SC-LC 2 5LDCL-M02

SC-LC 3 5LDCL-M03

SC-LC 5 5LDCL-M05

SC-LC 10 5LDCL-M10

62.5/125 µm MULTIMODE (OM1) OFNR DUPLEX Description Length (Meters) Duplex

SC-SC 1 62DSC-M01

SC-SC 2 62DSC-M02

SC-SC 3 62DSC-M03

SC-SC 5 62DSC-M05

SC-SC 10 62DSC-M10

ST-ST 1 62DST-M01

ST-ST 2 62DST-M02

ST-ST 3 62DST-M03

ST-ST 5 62DST-M05

ST-ST 10 62DST-M10

LC-LC 1 62DLC-M01

LC-LC 2 62DLC-M02

LC-LC 3 62DLC-M03

LC-LC 5 62DLC-M05

LC-LC 10 62DLC-M10

SC-ST 1 62DCT-M01

SC-ST 2 62DCT-M02

SC-ST 3 62DCT-M03

SC-ST 5 62DCT-M05

SC-ST 10 62DCT-M10

SC-LC 1 62DCL-M01

SC-LC 2 62DCL-M02

SC-LC 3 62DCL-M03

SC-LC 5 62DCL-M05

SC-LC 10 62DCL-M10

PRODUCT SPECIFICATIONS

Economy Series Fiber Optic Patch Cords

Econom y Series Fiber O ptic Patch C ords

J25 SS1027-CA-LA-US ENv7

Network Solutions Headquarters +1 (800) 722 2082 infoUSA@leviton.com

BERK-TEK™ Cable +1 (800) 237 5835 | infoUSA@leviton.com

Asia Pacific +852 3620 2602 infoAPAC@leviton.com

Canada +1 (800) 461 2002 infoCanada@leviton.com

Europe +44 (0) 1592 772124 infoEurope@leviton.com

Latin America

MX: +52 (55) 2128 6286

LATAM: +52 (55) 2333 5963

infoLATAM@leviton.com

Middle East & Africa +971 (4) 247 9800 infoMEA@leviton.com

NETWORK SOLUTIONS PRODUCTS ARE AVAILABLE WORLDWIDE IN OVER 100 COUNTRIES. VISIT US ONLINE AT LEVITON.COM/NS TO LEARN MORE.

Revised October 2025

Copyright © 2025 Leviton Manufacturing Co., Inc. All rights reserved.

Leviton reserves the right to modify product specifications without notice.

For further support information, visit Leviton.com/ns/support

Econom y Series Fiber O ptic Patch C ords

J25 SS1027-CA-LA-US ENv7

PRODUCT SPECIFICATIONS

Economy Series Fiber Optic Patch Cords

9/125 ΜM SINGLE-MODE (OS2) OFNR DUPLEX

Description Length (Meters) Duplex

SC-SC 1 UPDSC-S01

SC-SC 2 UPDSC-S02

SC-SC 3 UPDSC-S03

SC-SC 5 UPDSC-S05

SC-SC 10 UPDSC-S10

LC-LC 1 UPDLC-S01

LC-LC 2 UPDLC-S02

LC-LC 3 UPDLC-S03

LC-LC 4 UPDLC-S04

LC-LC 5 UPDLC-S05

LC-LC 6 UPDLC-S06

LC-LC 10 UPDLC-S10

SC-LC 1 UPDCL-S01

SC-LC 2 UPDCL-S02

SC-LC 3 UPDCL-S03

SC-LC 5 UPDCL-S05

SC-LC 10 UPDCL-S10

ST-ST 1 UPDST-S01

ST-ST 2 UPDST-S02

ST-ST 3 UPDST-S03

ST-ST 10 UPDST-S10

SC-ST 1 UPDCT-S01

SC-ST 2 UPDCT-S02

SC-ST 3 UPDCT-S03

SC-ST 10 UPDCT-S10

APC SINGLE-MODE (OS2) SIMPLEX

Description Length (Meters) SIMPLEX

SC-SC 1 APSSC-S01

SC-SC 2 APSSC-S02

SC-SC 3 APSSC-S03

SC-SC 5 APSSC-S05

SC-SC 10 APSSC-S10

Indianapolis, IN 46250

6161 East 75th Street

Dormakaba

Lydia Mattingly

Convenience, I am submitting to ensure your project gets a competitive bid.

Side-by-side comparisons and product catalog.

2.5 B. Manufacturer and Acceptable Substitutes/ Continuous Hinges

Jordan Sim, jordan.r.sim@das.oregon.gov

ODF NCD Santiam Facility

Ives Continuous Hinges

08 7100 6

Best 661/662HD Continuous Aluminum Geared Hinges

01/26/26

(463) 266-7170

X

Mary Fierros Bower, LRS Architects 01/27/26

Continuous Hinges Steel & Stainless Steel Continuous Barrel Type By BEST

Trusted experts. Proven reliability. Simply BEST.

2 Continuous Hinges: Steel & Stainless Steel Continuous Barrel Type

TABLE OF CONTENTS

600 series continuous hinge design Full mortise Full mortise with adjustable full-wrap edge guard Full mortise with half-wrap edge guard Half mortise Half mortise with half-wrap edge guard

Half mortise swing clear with half-wrap edge guard Full surface Edge guards EDP numbers and extras

Architectural Steel And Stainless Steel Barrel Type Continuous Hinges 640, 650, and 650HD Series Continuous Hinges

Resembling a piano- type pinned hinge, high performance mild steel, and 304 series stainless steel continuous hinges designed to withstand the most-punishing day-in-day-out use. In high use and high abuse openings, safe and reliable door operation depends on the smooth performance of the hinge system. A continuous hinge ensures complete alignment between the door and frame, resulting in smooth, maintenance free operation in the most demanding conditions.

• Tougher than typical nylon, Nylatron® bearings contain solid lubricants that contribute to low dynamic and static .coefficient of friction and when combined with elements that complete it’s chemical and physical make up result in low abrasion resistance and longer life

• Superior bearing assembly design inhibits dirt collection

• Two stainless steel bearings, top and bottom, prevent door sagging if Nylatron® bearings degrade during a fire

• BHMA certified

• Conforms to ANSI/BHMA Standard A156.26–2006, Grade 1-300

• Standard duty hinge is made out of 14 gauge material and supports doors weighing up to 600lbs., not exceeding 4' in width.

• Heavy duty hinge is made out of 12 gauge material and supports doors weighing up to 900lbs., not exceeding 4' in width.

• UL and ULC tested and certified to UL10C standard for 4' x 10' single doors and 8' x 10' pairs of doors

• Easily cleaned smooth surfaces prevent accumulation of dust and dirt

• Optional integrated edge guards protect the exposed door edges from damage

• Slim barrel draws minimum attention to the hinge.

Nylatron® is a registered trademark of Quadrant

Concealed Teflon coated pin for smooth, quiet operation

Except for stainless steel top and bottom bearings, twin Nylatron® bearings are located between all other knuckles

Indianapolis, IN 46250

6161 East 75th Street

Dormakaba

Lydia Mattingly

Convenience, I am submitting to ensure your project gets a competitive bid.

Side-by-side comparisons and product catalog.

RCI DKPS Power Supply - Electronic Access

Jordan Sim, jordan.r.sim@das.oregon.gov

ODF NCD Santiam Facility

Schlage Electronics PS902

08 7100

01/26/26

(463) 266-7170

7 2.5 Q. Manufacturer and Acceptable Substitutes/ Power Supplies

X

Mary Fierros Bower, LRS Architects 01/27/26

Power Supplies

RCI Power Supplies

DKPS-2A Power Supply 13- 5/16” x 17- 5/8” x 4- 5/16” (338mm x 448mm x 110mm)

• Input = 100-240VAC, 50-60Hz. 2.4A Max. draw

• Output 2 Amps continuous supply current at Nominal 12/24

VDC

• 4 outputs each, with electronic over-current protection set at 2 Amp

• Built-in dedicated charger for sealed lead acid or gel cell type batteries

• Battery load and charge test every 48hr

• Battery Reversal protection

• Low Battery indication at 11.40/22.80 Volts

• Low Battery disconnect at 10.10/20.30 Volts

• Automatic switch over to stand-by battery upon AC Failure

• Common “Batt.Fault” CMOS relay and indicator for all battery and charger fault. 30VDC @ 60mA

• CMOS relay output and indicator for AC failure within 60 seconds. 30VDC @ 60mA

• LEDs display on enclosure door (Green, Yellow, Blue)

• Common “Out Fault” CMOS relay for DC failure on any of the 4 outputs. 30VDC @ 60mA

• Battery charging leads included

• FPDB (Fire Panel Disconnect Board) standard

• Tamper switch available (optional, but required when installation must meet UL294 Edition 6 or higher)

DKPS-4A Power Supply 12-1/2"W x 12-1/2"H x 4"D (318mm x 318mm x 102mm)

Energy Field-Selectable 2A at 12 or 24VDC

Warranty Lifetime Limited Warranty

Energy Field-Selectable 4A at 12 or 24VDC

Warranty Lifetime Limited Warranty

• Input = 100-240VAC, 50-60Hz. 1.8A Max. draw, fuse at 4 Amp

• Output 4 Amps continuous supply current Power Factor 0.6 at Nominal 12/24 VDC

• 8 outputs rated at 2.0 amps Max

• Built-in dedicated charger for sealed lead acid or gel cell type batteries

• Battery load and charge test every 48hr

• Battery Reversal protection

• Low Battery indication at 11.40/22.80 Volts

• Low Battery disconnect at 10/20.2 Volts

• Automatic switch over to stand-by battery upon AC Failure

• Common “Batt.Fault” CMOS relay and indicator for all battery and charger fault. 30VDC @ 60mA

• CMOS relay output and indicator for AC failure within 60 seconds. 30VDC @ 60mA

• LEDs display on enclosure door (Green, Yellow, Blue)

• Battery charging leads included

• FPDB (Fire Panel Disconnect Board) standard

• Tamper switch available (optional, but required when installation must meet UL294 Edition 6 or higher)

RCI Power Supplies

DKPS-6A Power Supply 13- 5/16” x 17- 5/8” x 4- 5/16” (338mm x 448mm x 110mm)

DKPS-TSW Tamper Switches

• Input = 100-240VAC, 50-60Hz. 2.5A Max. draw, fuse at 6 Amp

• Output 6 Amps continuous supply current Power Factor 0.6 at Nominal 12/24 VDC

• 8 outputs rated at 2.0 amps Max

• Built-in dedicated charger for sealed lead acid or gel cell type batteries

• Battery load and charge test every 48hr

• Battery Reversal protection

• Low Battery indication at 11.40/22.80 Volts

• Low Battery disconnect at 10/20.2 Volts

• Automatic switch over to stand-by battery upon AC Failure

• Common “Batt.Fault” CMOS relay and indicator for all battery and charger fault. 30VDC @ 60mA

• CMOS relay output and indicator for AC failure within 60 seconds. 30VDC @ 60mA

• LEDs display on enclosure door (Green, Yellow, Blue)

• Battery charging leads included

• FPDB (Fire Panel Disconnect Board) standard

• Tamper switch available (optional, but required when installation must meet UL294 Edition 6 or higher)

Energy Field-Selectable 6A at 12 or 24VDC

Warranty Lifetime Limited Warranty

DKPS-TSW1-02 Tamper switch for DKPS power supply enclosure door

DKPS-TWS2-02

Tamper switch for DKPS power supplies (enclosure door & installation)

The tamper switch is a device that is designed to connect to the DKPS Power Supply. When installed, it signals a warning to authorized personnel if the metal enclosure has been removed from the wall and/or the door is not fully closed or secured.

Tamper switch is recommended but is required when the entire access control installation must meet UL294 Edition 6 or higher.

RCI Power Supplies Accessories WPDT Wireless Power & Data Transfer Transfers low voltage power and data signals without the use of hard wires.

9310RB

Relay Board Versatile and reliable board with input-output terminals designed to control low voltage supply.

2” x 1 9/16” x ¾” (50 x 40 x 19mm)

RB-DPDT8A

Relay Board Versatile and reliable board with input-output terminals designed to control low voltage supply.

2 ½” x 2” x ¾” (62 x 54 x 19mm)

The RCI wireless power and data transfer (WPDT) is an innovative and less intrusive way of wirelessly transferring low voltage power and data signals between a door and frame.

Features

• Ideal for situations where power cannot be routed to an electric lock in the door.

• Enables less wire runs to various points of the door.

• Eliminates a power transfer hinge or other method of power transfer.

• Two-piece device has an RF receiver and transmitter -transmitter resides on the frame side while the receiver resides in the door.

• For fail secure devices only.

• Power is delivered to the transmitter that transfers power/data wirelessly to the receiver.

• Ability to monitor RX, LBM, DBM (max 2 signals)

• Status indicators (frame & door side).

• Monitoring function(s) report change of state of the lock switches back to a control panel.

Features

• 12/24 Selectable

• Large screw terminals for ease of wire connection

• LED indicators

• SPDT output

• 10A Rated

Features

• 12/24 Selectable

• Large screw terminals for ease of wire connection

• LED indicators

• DPDT output

• 8A Rated

Energy

12VDC/24VDC

field selectable

Energy Output amperage 600mA/12VDC 300mA/24VDC

Energy Maximum input power 600mA @ 24VDC

Warranty 1 Year Limited Warranty

LISTED

Warranty 2 Year Limited Warranty

Warranty 2 Year Limited Warranty

85RCI Product Catalog

TD365 Day Timer 3-3/4"W x 4-11/16"H x 1"D (95mm x 120mm x 25mm)

Warranty 2 Year Limited Warranty

• 24 hour, 365 day timer for individual daily events

• 2 momentary or latching SPDT relays to control locks and other electronically controlled devices or

• 40 holidays and 99 user events

• Large alpha-numeric backlit LCD display for easy programming

• Lithium battery included

• "First Person In" feature to prevent unattended open doors

• High current capabilities

• EEProm memory for safe storage of data (in the event of a power failure)

• Ideal for openings requiring scheduled access

RCI Product Catalog86

• Plug into a standard 115VAC outlet to provide low voltage AC output

• Thermally protected to prevent overload due to short

AC Plug-In Transformers 2-1/4"W x 3-3/16"H x 2"D (57mm x 81mm x 51mm)

Warranty 2 Year Limited Warranty

Model Description Output Voltage / Power T1002 Plug-In Transformer CSA to UL 1310 12VAC-20VA T1004 Plug-In Transformer CSA to UL 1310 16VAC-20VA T1008 Plug-In Transformer CSA to UL 1310 24VAC-20VA

Model Description Output Voltage / Power 10R1 Rectifier 1A 10R1-6 Rectifier with 6" leads 1A 10R3 Rectifier 3A 10R3-6 Rectifier with 6" lead 3A

NOTE: T1002 shown NOTE: T1005 shown

• For permanent installations requiring hard wiring

AC Wire-In Transformers T1001: 2-1/4"W x 2"H x 2"D (57mm x 51mm x 51mm) T1005 and T1009: 2-1/4"W x 2"H x 2-1/4"D (57mm x 51mm x 57mm)

Warranty 2 Year Limited Warranty

Model Description Output Voltage / Power

T1001 Wire-In/UL Transformer 12VAC-20VA T1005 Wire-In Transformer CSA to UL 1585 16.5VAC-37VA T1009 Wire-In Transformer CSA to UL 1585 24VAC-40VA

Plugs into a standard 115VAC outlet and provides a 12VDC output

• 6' Wire leads (1.8m)

DC Plug-In Power Supply 1-5/8"W x 3"H x 1-3/8"D (41mm x 76mm x 35mm)

Warranty 2 Year Limited Warranty

Model Description Output Voltage / Power T1003 Plug-In/UL Power Supply 12VDC-1.5A

• Converts non-filtered AC to DC for silent operation

• Shrink-connect leads on -6" leads

Bridge Rectifiers 10R1, 10R1-6: 3/16"D x 3/8"Dia. (4.75mm x 9.5mm) 10R3, 10R3-6: 1/4"D x 5/8"Sq. (6.4mm x 16mm)

Warranty 2 Year Limited Warranty

The dormakaba DKPS-2A power supply/charger is designed to convert 120-240 VAC, 50 or 60Hz into a continuous 2 Amp supply at 12 or 24VDC power outputs (switch selectable).

The DKPS series power supply has 2 supervisory outputs (AC power fail & battery fail) and the power distribution controller board also has 2 supervisory outputs (DC Fail & status) that can be connected to remote access control units to monitor the power supply operation. Supervisory outputs have form C relay.

This DKPS model includes a power distribution controller board that features electronic over-current protection on the 8 voltage outputs that can be used in a wide array of access control and egress door applications.

Application permitting, the DKPS series power supply provi-des several standby battery options for continuous power in case of an AC power failure for a specified period of time.

The DKPS power supply series also available in 4A and 6A models to suit multiple applications.

Robust applications Supplies eight voltage (12/24 Vdc at 2.0 amp) fail safe or fail secure outputs to support access devices including:

• Electromagnetic locks, electric strikes & power bolts

• Specialty Electric locks

• Motorized Latch Retraction (MLR)

• Egress doors and exit devices

Ease of Maintenance

• Convenient metal housing which can accommodate up to two (2) 7 AH rechargeable batteries depending on your application

• Status LEDs on enclosure front door (Green, Yellow, Blue)

Safety

• Supervisory outputs for remote monitoring

• Supervised connection to fire panel or access panel for automatic unlocking of specified doors

• Remote reset of power supply after fire alarm

• Optional front door tamper switch or dual door and wall removal tamper switches

• Fault and overload protection

DK 2A

Power Supply

Power supplies designed with safety & reliability in mind

DKPS 2A

Power Supply dormakaba USA, Inc.

6161 75th Street Indianapolis, IN 46250 Tel: 1-800-523-8483 www.dormakaba.us DKPS2A 10-20

Copyright © 2020 dormakaba Canada Inc. Information on this sheet is intended for general use only. dormakaba reserves the right to alter designs and specifications without notice or obligation.

Input & Output

Input Voltage 110-220VAC, 50-60Hz 2.4A

Output Voltage Selectable 12 or 24 VDC voltage outputs; each output max 2.0 A with electronic over-current protec-tion set at 2 Amp. 8 voltage outputs

Environmental

Dimensions Power Supply Board: 7-11/16” x 4- 5/16” (195mm x 110mm) Power Distribution Controller Board: 7-3/8” X 3 1/2” (187mm x 90mm) Metal Enclosure: 13- 5/16” x 17- 5/8” x 4- 5/16” (338mm x 448mm x 110mm)

Weight 12 lbs (5.44 Kg)

Operating temperature 32º to 120º F (0º to 49º C)

Stand-by Battery Application dependent. Auto switchover upon AC failure; Built in 1.5 Amp charger with current test every 48 hrs

Capacity Enclosure supports two (2) 12VDC-7 amp-hour (AH) batteries

Type Sealed lead acid or gel cell

Power Supply Supervision

AC Power Fail Form C dry contact relay (Relay contacts rated 28Vdc, 300mA)

Battery Form C dry contact relay (Relay contacts rated 28Vdc, 300mA)

Cover LED Indicators Green: AC power; Blue: DC power; Yellow: Battery charger & fault

Power Distribution Controller Board Supervision

DC Fail Form C dry contact relay (Relay contacts rated 28Vdc, 300mA)

Status output Form C dry contact relay…