Attachment-O3__Museum_Drawings_Pt3.pdf

XX XX

DRAWING SCHEDULE

N.T.S.3

GENERAL AUDIO & VIDEO SYSTEM NOTES

N.T.S.2

PLATE & PANEL CONSTRUCTION CONVENTIONS

N.T.S.1

MUSEUM OF WESTWARD EXPANSION AUDIO AND VIDEO

DRAWING SCHEDULE

Sheet Number Sheet Title Scale

AV010

TABLE OF CONTENTS / SCHEDULE OF

TERMINATIONS

NTS

AV020 AV SCHEDULE OF TERMINATIONS NTS

AV101

ENTRY LEVEL PARTIAL PLAN AV

LOCATIONS - AREA 1.1/1.2/1.3

1/8" = 1'0"

AV102

ENTRY LEVEL PARTIAL PLAN AV

LOCATIONS - AREA1.1/1.2/1.4

1/8" = 1'0"

AV103

MEZZANINE LEVEL PARTIAL PLAN AV

LOCATIONS - AREA 1.2/1.3

1/8" = 1'0"

AV104

MAIN LEVEL PARTIAL PLAN AV

LOCATIONS - AREA 1.2/1.3

1/8" = 1'0"

AV105

MAIN LEVEL PARTIAL PLAN AV

LOCATIONS - AREA 3.1/4.1/2.1

3/8" = 1'0"

AV106

MAIN LEVEL PARTIAL PLAN AV

LOCATIONS - AREA 3.2

1/4" = 1'0"

AV107

MAIN LEVEL PARTIAL PLAN AV

LOCATIONS - AREA 4.1

1/4" = 1'0"

AV108

MAIN LEVEL PARTIAL PLAN AV

LOCATIONS - ROOM 107

1/4" = 1'0"

AV111

ENTRY LEVEL PARTIAL AV RCP

SECURITY

1/4" = 1'0"

AV201

PROGRAM AND PAGING AV

SINGLE-LINE 1

NTS

AV202

PROGRAM AND PAGING AV

SINGLE-LINE 2

NTS

AV203

PROGRAM AND PAGING AV

SINGLE-LINE 3

NTS

AV204

MULTI-PURPOSE ROOM AV

SINGLE-LINE 1

NTS

AV205

MULTI-PURPOSE ROOM AV

SINGLE-LINE 2

NTS

AV206

CONFERENCE ROOMS AV

SINGLE-LINE 1

NTS

AV207

CONFERENCE ROOMS AV

SINGLE-LINE 2

NTS

AV208

DIGITAL SIGNAGE AND VIDEO

SINGLE-LINE 1

NTS

AV209

DIGITAL SIGNAGE AND VIDEO

SINGLE-LINE 2

NTS

AV210

DIGITAL SIGNAGE AND VIDEO

SINGLE-LINE 3

NTS

AV211

PORTABLE AUDIO PERFORMANCE

RACK SINGLE-LINE

NTS

AV212

PORTABLE VIDEO PERFORMANCE

RACK SINGLE-LINE

NTS

AV213 AV OUTPUT DROPBOX SINGLE-LINE NTS

AV301 CONNECTOR PLATE DETAILS AS NOTED

AV302 MOUNTING DETAILS 1 AS NOTED

AV303 RACK DETAILS 1 AS NOTED

AV304 RACK DETAILS 2 AS NOTED

AV305 MOUNTING DETAILS 2 AS NOTED

LOW VOLTAGE RACEWAY SIZING

N.T.S.4

3/4/2016 RFP 150: EXHIBIT SPEAKER WIRING (RFI-0661)1

REFERENCED CONNECTION

SHEET THAT THE OTHER END OF THE CONNECTION IS ON.

IF BLANK IT IS ON THE CURRENT SHEET

"AA" -- TERRAZO FLR BOX PANELS

SCALE 1:21

"AB" -- INFO FLOOR BOX PANELS

SCALE 1:22

"AD" -- PLAZA PANEL

SCALE 1:26

"AE" -- CONF ROOM FB PANELS

SCALE 1:23

"AF01" -- DIST LEARN WALL PANEL

SCALE 1:24

"AF02-05" -- CONF ROOM WALL BOX

SCALE 1:25

PUSH

"AG" -- PROJECTOR PANEL

SCALE 1:27

"AH" -- TOUCH CONTROL PANEL

SCALE 1:28

"AI" -- BUTTON CONTROL PANEL

SCALE 1:29

"AJ" -- PAGING STATION

SCALE 1:210

"AL" -- ALS ANTENNA PANEL

SCALE 1:211

"BK04" -- PA LOUDSPEAKER PANEL

SCALE 1:212

"BX01-05" -- WALL DISPLAY PANELS

SCALE 1:213

"BX06" -- CEILING DISPLAY PANELS

SCALE 1:213

"BW" -- 70V CEILING SPEAKER DETAIL

SCALE 1:41

"BX04" -- OUTDOOR DISPLAY KIOSK MOUNT PATTERN

SCALE 3"=1'0"3

"BKxx" - LOUDSPEAKER MOUNTING DETAIL

SCALE 1"=1'2

AV CONDUIT (3 4") ENTRY

AC CONDUIT (3 4") ENTRY

"ZX" -- MASTER SYSTEM RACK

SCALE 1:81"ZA" -- ENTRY LVL DIST. RACK

SCALE 1:82"ZC" -- MAIN LVL W. DIST. RACK

SCALE 1:83"ZG" -- IR CONFERENCE RACK

SCALE 1:84"ZJ" -- MAIN LVL N. DIST. RACK

SCALE 1:85

"ZE" -- WEST MULTIPURPOSE RACK

SCALE 1:81

"ZF" -- EAST MULTIPURPOSE RACK

SCALE 1:82

PORTABLE AUDIO PERFORMANCE SYSTEM SCALE: 1:83

PORTABLE VIDEO PERFORMANCE SYSTEM SCALE: 1:84

AV OUTPUT DROPBOX SCALE: 1:85

"ZH" -- METRO CONF RM RACK

SCALE 1:86

05/25/2016 RFI #884, RFP #199

M LNO

05/25/2016 RFI #819, RFP #199

M LN

05/25/2016 RFI #819, RFI # 884, RFI # 895, RFP #1992

1. WIRE AND CABLE SHEATH SHALL BE MAINTAINED TO FINAL

DESTINATION. ALL UTP CABLE TERMINATIONS TO MAINTAIN

TWIST OF INDIVIDUAL PAIRS TO WITHIN 3/8" OR LESS OF

FINAL TERMINATION.

2. CABLES INSTALLED IN PLENUM AREAS WITHOUT CONDUIT

SHALL BE PLENUM RATED. IT IS THE RESPONSIBILITY OF THE

CONTRACTOR TO INSPECT ALL DRAWINGS AND VERIFY

SPACES PLENUM CABLE IS REQUIRED.

3. PROVIDE LABELS FOR ALL TERMINATION BLOCKS, PATCH

PANELS… REFER TO SPECIFICATIONS FOR REQUIREMENTS.

ALL WIRES AND CABLES SHALL BE LABELED WITHIN 6" OF

FINAL TERMINATION. LABELS SHALL BE MACHINE PRINTED,

SELF-LAMINATING TYPE.

4. INSTALL EACH CABLE SET INDICATED BY THE DOCUMENTS

FROM THE OUTLET LOCATION TO THE RESPECTIVE SERVING

TECHNOLOGY SPACE (UNO).

5. ALL WIRING, CABLING, SYSTEM DEVICES AND SYSTEM

CONTROLS SHALL BE INSTALLED IN COMPLIANCE WITH ALL

CODE REQUIREMENTS, MANUFACTURER'S INSTRUCTIONS

AND BEST PRACTICES UNLESS WRITTEN DIRECTION TO THE

CONTRARY IS PROVIDED.

6. WIRING AND CABLING IN CEILING AREAS WHERE CABLE

TRAY IS NOT SPECIFIED SHALL BE PROPERLY SUPPORTED

BY CONDUIT. CABLES SHALL BE FULLY SUPPORTED USING

ONLY CABLE TRAYS OR CONDUITS. J-HOOKS ARE NOT AN

ACCEPTABLE MEANS OF SUPPORT. QUANTITY OF CABLES

AND MOUNTING OF HARDWARE SHALL BE IN COMPLIANCE

WITH MANUFACTURER INSTRUCTIONS AND SPECIFIED

MAXIMUM FILL RATIOS.

7. IS THE RESPONSIBILITY OF THE CONTRACTOR TO INSPECT

ALL CABLE PATHWAYS PRIOR TO INSTALLATION OF CABLING

AND VERIFY PATHWAYS HAS BEEN INSTALLED IN

CONFORMANCE WITH THE DOCUMENTS.

8. CONTRACTOR SHALL VERIFY PATHWAYS ARE INSTALLED IS

SUCH A MANNER THAT CABLING DOES NOT EXCEED

MAXIMUM ALLOWABLE DISTANCES.

9. CONTRACTOR SHALL INSPECT PATHWAYS AND VERIFY ALL

REQUIRED PROTECTIVE BUSHINGS, GROUNDING BUSHINGS,

RADIUS LIMITERS, ETC. HAVE BEEN INSTALLED PRIOR TO

CABLE INSTALLATION

10. SIGNAL / CABLE TYPES SHALL NOT BE MIXED. PROVIDE

INDEPENDENT PATHWAYS FOR ALL COPPER/UTP, OPTICAL

FIBER, A/V CABLING.

11. CONTRACTOR SHALL PROVIDE A CATEGORY 6 CABLING

SOLUTION.

11. CONTRACTOR SHALL NOT “MIX” MANUFACTURERS. ALL

CABLING AND CONNECTIVITY SHALL BE FROM A SINGLE

MANUFACTURER.

12. CONTRACTOR SHALL PROVIDE MANUFACTURERS'

EXTENDED APPLICATIONS ASSURANCE WARRANTY FOR THE

SYSTEM INSTALLED.

13. MANUFACTURERS' EXTENDED WARRANTY SHALL APPLY TO

ALL CABLING AND CONNECTIVITY PRODUCTS INSTALLED.

14. MANUFACTURERS' EXTENDED WARRANTY SHALL BE FOR A

MINIMUM OF TWENTY-YEARS FROM OWNERS FINAL

ACCEPTANCE

15. THIS FACILITY REQUIRES PHYSICAL SEPARATION FOR

SEVERAL ENTITIES AND NETWORKS.

16. CABLING FOR DIFFERENT ENTITIES SHALL NOT OCCUPY THE

SAME RACEWAY. CABLING, RACEWAYS AND SUPPORTS FOR

THE FOLLOWING SHALL BE SEPARATE:

A. NATIONAL PARK SERVICES

B. JNPA

C. METRO

D. AUDIOVISUAL

E. SECURITY

TELECOMMUNICATIONS DRAWING LIST

SHEET NUMBER SHEET NAME

TT-000

DRAWING LIST, NOTES AND SYMBOL LIST

TT-001

DRAWING LIST, NOTES AND SYMBOL LIST

TT-002 TELECOM MAIN LEVEL ZONE PLAN

TT-003 TELECOM MEZZANINE LEVEL ZONE PLAN

TT-004 TELECOM ENTRY LEVEL ZONE PLAN

TT-097 TELECOM MECHANICAL TUNNEL PLAN

TT-098 TELECOM LOWER LOADING PLAN

TT-099 TELECOM LOAD LEVEL OVERALL PLAN

TT-100 TELECOM MAIN LEVEL OVERALL FLOOR PLAN

TT-101 TELECOM MEZZANINE LEVEL OVERALL FLOOR PLAN

TT-102 TELECOM ENTRY LEVEL OVERALL FLOOR PLAN

TT-103 TELECOM ROOF LEVEL OVERALL FLOOR PLAN

TT-104 TELECOM MAIN LEVEL OVERALL RCP

TT-105 TELECOM MEZZANINE LEVEL OVERALL RCP

TT-106 TELECOM ENTRY LEVEL OVERALL RCP

TT-120 TELECOM MAIN LEVEL PARTIAL PLAN

TT-121 TELECOM MAIN LEVEL PARTIAL PLAN

TT-122 TELECOM MAIN LEVEL PARTIAL PLAN

TT-123 TELECOM MEZZANINE LEVEL PARTIAL PLAN

TT-124 TELECOM MEZZANINE LEVEL PARTIAL PLAN

TT-125 TELECOM MEZZANINE LEVEL PARTIAL PLAN

TT-126 TELECOM ENTRY LEVEL PARTIAL PLAN

TT-127 TELECOM ENTRY LEVEL PARTIAL PLAN

TT-128 TELECOM ENTRY LEVEL PARTIAL PLAN

TT-129 TELECOM ENTRY LEVEL PARTIAL PLAN

TT-130 TELECOM MAIN LEVEL PARTIAL PLAN

TT-131 TELECOM MAIN LEVEL PARTIAL PLAN

TT-132 TELECOM MAIN LEVEL PARTIAL PLAN

TT-133 TELECOM MAIN LEVEL PARTIAL PLAN

TT-134 TELECOM MAIN LEVEL PARTIAL PLAN

TT-134.1 TELECOM MAIN LEVEL PARTIAL PLAN

TT-135 TELECOM MAIN LEVEL PARTIAL PLAN

TT-136 TELECOM MAIN LEVEL PARTIAL PLAN

TT-137 TELECOM MAIN LEVEL PARTIAL PLAN

TT-138 TELECOM MAIN LEVEL PARTIAL PLAN

TT-143 TELECOM MUSEUM STORE LOWER LEVEL PLANS

TT-159 TELECOM MUSEUM STORE LOWER LEVEL RCP

TT-160 TELECOM MAIN LEVEL PARTIAL RCP

TT-161 TELECOM MAIN LEVEL PARTIAL RCP

TT-162 TELECOM MAIN LEVEL PARTIAL RCP

TT-163 TELECOM MEZZANINE LEVEL PARTIAL RCP

TT-164 TELECOM MEZZANINE LEVEL PARTIAL RCP

TT-165 TELECOM MEZZANINE LEVEL PARTIAL RCP

TT-166 TELECOM ENTRY LEVEL PARTIAL RCP

TT-167 TELECOM ENTRY LEVEL PARTIAL RCP

TT-168 TELECOM ENTRY LEVEL PARTIAL RCP

TT-169 TELECOM ENTRY LEVEL PARTIAL RCP

TT-170 TELECOM MAIN LEVEL PARTIAL RCP

TT-171 TELECOM MAIN LEVEL PARTIAL RCP

TT-172 TELECOM MAIN LEVEL PARTIAL RCP

TT-173 TELECOM MAIN LEVEL PARTIAL RCP

TT-174 TELECOM MAIN LEVEL PARTIAL RCP

TT-174.1 TELECOM MAIN LEVEL PARTIAL RCP

TT-175 TELECOM MAIN LEVEL PARTIAL RCP

TT-176 TELECOM MAIN LEVEL PARTIAL RCP

TT-177 TELECOM MAIN LEVEL PARTIAL RCP

TT-178 TELECOM MAIN LEVEL PARTIAL RCP

TT-300 TELECOM ENLARGED ROOM PLANS

TT-300A TELECOM ENLARGED ROOM PLANS

TT-301 TELECOM ENLARGED ROOM PLANS

TT-301A TELECOM ENLARGED ROOM PLANS

TT-302 TELECOM ENLARGED ROOM PLANS

TT-302A TELECOM ENLARGED ROOM PLANS

TT-303 TELECOM ENLARGED ROOM PLANS

TT-303A TELECOM ENLARGED ROOM PLANS

TT-304 TELECOM ENLARGED ROOM PLANS

TT-304A TELECOM ENLARGED ROOM PLANS

TT-306 TELECOM ENLARGED ROOM PLANS

TT-306 TELECOM ENLARGED ROOM PLANS

TT-307 TELECOM ENLARGED ROOM PLANS

TT-308 TELECOM ENLARGED ROOM PLANS

TT-308A TELECOM ENLARGED ROOM PLANS

TT-311 TELECOM ENLARGED ROOM PLANS

TT-311A TELECOM ENLARGED ROOM PLANS

TT-312 TELECOM ENLARGED ROOM PLANS

TT-312A TELECOM ENLARGED ROOM PLANS

TT-400 TELECOM RISER DIAGRAM

TT-400A TELECOM RISER DIAGRAM

TT-401 TELECOM RISER DIAGRAM

TT-402 TELECOM RISER DIAGRAM

TT-403 TELECOM RISER DIAGRAM

TT-403A TELECOM RISER DIAGRAM

TT-500 TELECOM DETAILS

TT-501 TELECOM DETAILS

TT-502 TELECOM DETAILS

TT-503 TELECOM DETAILS

TT-504 TELECOM DETAILS

TT-505 TELECOM DETAILS

MUSEUM OF WESTERN EXPANSION

TELECOMMUNICATIONS DRAWINGS

1. WHERE EXACT DIMENSIONS ARE NOT INDICATED, THE SCALE OF THIS DRAWING

IS SUFFICIENTLY ACCURATE FOR DETERMINING THE LOCATION OF EQUIPMENT,

JUNCTION BOXES, OUTLET BOXES, WIREWAYS, PANELS, ETC. WHERE EXACT

DIMENSIONS ARE INDICATED, THE REFERENCE SURFACE SHALL BE FINAL

FINISHED SURFACE INCLUDING ANY ACOUSTICAL TREATMENTS. ROOM

DIMENSIONS ON THE DRAWINGS HAVE BEEN TAKEN FROM PRELIMINARY

ARCHITECTURAL DRAWINGS. ALL DIMENSIONS SHALL BE VERIFIED AND ANY

DEVIATIONS CAUSING CHANGES EXCEEDING 3-INCHED SHALL BE COORDINATED

WITH THE CONTRACTING OFFICER.

2. DIMENSIONS SHOWN ARE SUGGESTED PLACEMENTS AND ARE PROVIDED FOR

INFORMATION PURPOSES ONLY. COORDINATE ALL DEVICES AND DIMENSIONED

LOCATIONS WITH ARCHITECTURAL AND ENGINEERING DRAWINGS.

3. DRAWINGS ARE NOT TO BE USED FOR ARCHITECTURAL OR ENGINEERING

PURPOSES. DRAWINGS SHALL ONLY BE USED FOR TECHNOLOGY SYSTEM

INSTALLATION AND COORDINATION WITH OTHER CONTRACTORS AND SYSTEMS.

COORDINATE PATHWAYS FOR ALL TECHNOLOGY RELATED DEVICES WITH THE

ARCHITECTURAL AND ENGINEERING PLANS.

4. ALL TECHNOLOGY DEVICES SHALL BE SECURELY MOUNTED PLUMB AND SQUARE

TO WALLS, FLOORS OR RACKS PER THE MANUFACTURERS' RECOMMENDED

MOUNTING PRACTICES.

5. ALL EQUIPMENT SHOWN IN PHANTOM IS FOR REFERENCE ONLY.

6. FIRESTOPS SHALL BE INSTALLED IN ALL SLAB AND WALL PARTITION

PENETRATIONS PROVIDED FOR THE INSTALLATION OF CABLE. FIRESTOPS SHALL

MAINTAIN THE RATING OF THE SLAB OR WALL PARTITION. REVIEW

ARCHITECTURAL PLANS FOR PARTITION TYPES.

7. ALL FIRESTOP SYSTEMS/ASSEMBLIES USED FOR ALL PENETRATIONS SHALL BE

APPROVED BY THE AHJ.

8. ALL ELECTRICAL REQUIREMENTS FOR TECHNOLOGY SHALL BE INSTALLED IN

ACCORDANCE WITH LOCAL ELECTRICAL CODES.

9. ALL DEVICES SHOWN INCLUDING RACKS, WIREWAYS, CONDUITS, ETC. SHALL BE

INSTALLED IN ACCORDANCE WITH LOCAL SEISMIC REQUIREMENTS.

10. REFER TO TELECOMMUNICATIONS SPECIFICATION FOR INSTALLATION

INSTRUCTIONS FOR FLOORBOXES, JUNCTION BOXES, PLYWOOD PANELS,

GROUNDING CONDUCTORS, BUSBARS, CONDUITS, CABLE TRAYS AND METALLIC

ENCLOSURES.

11. ELECTRICAL FEEDS SHALL NOT BE RUN PARALLEL TO VIDEO AND/OR AUDIO

LINES OR RACEWAYS. IF ELECTRICAL FEEDS MUST BE RUN PARALLEL TO

AUDIO/VIDEO LINES, A MINIMUM OF 4' - 0” OF SEPARATION SHALL BE MAINTAINED.

12. REFER TO SPECIFICATIONS FOR SEPARATION REQUIREMENTS FOR

TELECOMMUNICATIONS CABLING.

13. POWER BREAKER PANELS ARE SIZED AND SPECIFIED BY THE ELECTRICAL

ENGINEER, REFER TO ELECTRICAL DRAWINGS. ALL CIRCUITS SHALL BE

PROTECTED BY 120VAC, 20 AMP BREAKERS (UNO).

14. POWER RECEPTACLES SHOWN ON TECHNOLOGY DRAWINGS ARE DEDICATED TO

SPECIFIC TECHNOLOGY EQUIPMENT AND ARE SHOWN FOR REFERENCE ONLY.

THESE RECEPTACLES SHOULD BE ISOLATED GROUND / COMMON PHASE. REFER

TO ELECTRICAL DRAWINGS FOR ADDITIONAL POWER UTILITY RECEPTACLES.

15. WHERE POWER CIRCUITS ARE SHOWN TERMINATING INTO JUNCTION BOXES

WITHOUT RECEPTACLES, THE WIRES SHALL BE CAPPED AND THE BOXES

COVERED. THESE CIRCUITS WILL BE CONNECTED BY OTHERS DURING

INSTALLATION OF THE TECHNOLOGY SYSTEM EQUIPMENT.

16. GROUND ALL CONDUITS, CABLE TRAYS, LADDER RACKS, RELAY RACKS,

CABINETS AND JUNCTION BOXES PER THE MANUFACTURER'S

RECOMMENDATIONS AND PER ALL APPLICABLE CODES.

17. ALL EMPTY CONDUITS SHALL BE REAMED, CLEANED AND CAPPED (WHERE

APPROPRIATE), TAGGED AND FURNISHED WITH PULL LINES.

18. INSTALL CABLE TRAY FOR TELECOMMUNICATIONS WIRING TO MAINTAIN A

MINIMUM OF 5” SEPARATION FROM FLUORESCENT LIGHTING.

19. THERE SHALL BE A MINIMUM OF ONE PULL BOX FOR EVERY 100' OF STRAIGHT

EMPTY CONDUIT AND/OR ONE PULL BOX FOR MORE THAN TWO 90° BENDS OR

LESSER BENDS TOTALING 180° IN A CONDUIT RUN.

20. MAINTAIN MINIMUM BEND RADIUS OF 10X O.D. FOR ALL CONDUITS LESS THAN 4”.

21. MAINTAIN MINIMUM BEND RADIUS OF 48” FOR ALL CONDUITS OF 4” O.D.

22. ALL 4” O.D. CONDUITS SHALL BE PROVIDED WITH A 5/8” PULL-TAPE HAVING A

MINIMUM TENSILE STRENGTH OF 1800 LBS. PULL-TAPE SHALL HAVE FOOTAGE

MARKINGS.

23. ALL CONDUITS LESS THAN 4” O.D. SHALL BE PROVIDED WITH A PULL-LINE.

PULL-LINE SHALL HAVE A MINIMUM TENSILE STRENGTH OF 210 LBS.

24. STUB UP CONDUIT SLEEVES THROUGH SLAB 3” ABOVE FINISHED FLOOR, EXCEPT

IN THE CASE OF ACCESS FLOOR, IN WHICH CASE STUB UPS SHALL TERMINATE

UNDER THE ACCESS FLOOR.

25. ALL CABLE TRAY THAT IS SURFACE MOUNTED ON SLAB BELOW ACCESS FLOOR

SHALL BE PROVIDED WITH SUPPORTS. SUPPORTS SHALL BE SECURELY

FASTENED TO THE SLAB AND CABLE TRAY SHALL BE FASTENED TO THE

SUPPORTS.

26. PROVIDE ALL CABLE BASKET TRAY CONNECTION HARDWARE, GROUNDING LUGS,

GROUNDING STRAPS, THERMAL EXPANSION PLATES, SUPPORT BRACKETS,

SPLICE HARDWARE, TERMINATION KITS, END SUPPORT KITS, CEILING SUPPORT

HARDWARE AND CABLE BEND RADIUS LIMITING DEVICES FOR ALL CABLE TRAY

LOCATIONS PER MANUFACTURER'S RECOMMENDATIONS AND APPLICABLE

CODES.

27. PROVIDE ALL CABLE RUNWAY CONNECTION HARDWARE, GROUNDING LUGS,

GROUNDING STRAPS, THERMAL EXPANSION PLATES, SUPPORT BRACKETS,

SPLICE HARDWARE, TERMINATION KITS, END SUPPORT KITS, CEILING SUPPORT

HARDWARE, 7” CABLE RETAINING POSTS AND CABLE BEND RADIUS LIMITING

DEVICES FOR ALL CABLE RUNWAY LOCATIONS PER MANUFACTURER'S

RECOMMENDATIONS AND APPLICABLE CODES.

28. ALL POWER CONDUIT, POWER WIREWAYS AND POWER JUNCTION BOXES ARE TO

BE REVIEWED BY THE ELECTRICAL ENGINEER FOR CODE COMPLIANCE.

31 EMPTY CONDUIT RUNS ON THE TECHNOLOGY DRAWINGS SHOW ONLY

INTERCONNECTION BETWEEN TERMINATION POINTS. THE EXACT PATH OF THE

CONDUITS IS TO BE DETERMINED BY THE ELECTRICAL ENGINEER AND FIELD

CONDITIONS.

32. ALL CABLES ARE TO BE IN CONDUIT IN NON-ACCESSIBLE SPACES AND SHALL

ROUTE TO TR'S OR TO CABLE TRAY INCLUDING HORIZONTAL AND VERTICAL

RUNS. HORIZONTAL CABLES ONLY, IN ACCESSIBLE SPACES SHALL ROUTE IN

CABLE TRAY..

33. NOTIFY CONTRACTING OFFICER ON ANY DISCREPANCIES BETWEEN EXISTING

CONDITIONS AND THE TECHNOLOGY DRAWINGS. OBTAIN CLARIFICATION

BEFORE PROCEEDING WITH WORK.

34. CONTRACTOR SHALL RESTORE CEILINGS, WALLS AND ANY OTHER SURFACES

AFFECTED BY ITS WORK UPON COMPLETION OF WORK WITH LIKE MATERIALS TO

MATCH EXISTING CONDITIONS.

35. REFER TO A-700 SERIES PLANS FOR FLOOR BOX LOCATIONS, TYPES AND

DETAILS.

36. IT SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR TO VERIFY SIGNAL /

CONDUIT PATHWAYS WITH THE ELECTRICAL ENGINEERING DRAWINGS.

37. CONTRACTOR SHALL PROVIDE A TELECOMMUNICATIONS GROUNDING AND

BONDING SYSTEM IN ACCORDANCE WITH ANSI/TIA-607-B STANDARDS.

38. ALL CONDUITS USED FOR TELECOMMUNICATIONS / AV / SECURITY CABLING

SHALL BE GROUNDED AND BONDED IN ACCORDANCE WITH ANSI/TIA-607-B

STANDARDS. IT IS THE CONTRACTORS RESPONSIBILITY TO VERIFY GROUNDING

DEVICES ARE INSTALLED PRIOR TO CABLING INSTALLATION.

39. ALL CONDUITS USED FOR TELECOMMUNICATIONS / AV / SECURITY CABLING

SHALL BE PROVIDED WITH PROTECTIVE BUSHINGS AT ALL TERMINATION POINTS

INCLUDING BUT NOT LIMITED TO ALL JUNCTION BOXES, PULL-BOXES AND WALL

BOXES. IT IS THE CONTRACTORS RESPONSIBILITY TO VERIFY PROTECTIVE

BUSHINGS ARE INSTALLED PRIOR TO CABLING INSTALLATION.

40. ALL PLYWOOD BACKBOARDS IN TECHNOLOGY ROOMS SHALL HAVE (2) COATS OF

FIRE RETARDANT PAINT APPLIED TO ALL 6 SIDES PRIOR TO MOUNTING. FIRE

RETARDANT PAINT SHALL BE WHITE IN COLOR. CONTRACTOR SHALL MASK (1)

FIRE RATED STAMP ON EACH PLYWOOD BACKBOARD INSTALLED PRIOR TO

PAINTING. MASKING TAPE SHALL BE REMOVED AFTER PLYWOOD BACKBOARD

INSTALLATION

41. ALL PARTS AND/OR ACCESSORIES SHALL BE UL LISTED AND RATED FOR THE

ENVIRONMENT IN WHICH THEY ARE INSTALLED.

42. REFER TO ELECTRICAL SHEETS E-002 AND E-003 FOR THE CONSOLIDATED

RESPONSIBILITY MATRIX FOR COORDINATION OF ROUGH-IN FOR FACILITY AND

EXHIBIT AUDIO/VISUAL, NETWORK, RADIO, STRUCTURED CABLING, ACCESS

CONTROL/INTRUSION DETECTION AND VIDEO SURVEILLANCE SYSTEMS.

1. A UNIFIED TECHNOLOGY GROUNDING AND BONDING SYSTEM SHALL BE

INTEGRATED WITH AND PROVISIONED IN ADDITION TO THE ELECTRICAL

GROUNDING SYSTEM FOR THE SPACE.

2. THE GROUNDING AND BONDING SYSTEM SHALL BE INSTALLED IN

ACCORDANCE WITH ANSI/TIA-607-B STANDARD “COMMERCIAL BUILDING

GROUNDING AND BONDING FOR TELECOMMUNICATIONS.

3. THE FOLLOWING IS REQUIRED FOR A TELECOMMUNICATIONS

GROUNDING AND BONDING SYSTEM:

A. A PRE-DRILLED MINIMUM 24” X 4” X ¼” SOLID COPPER BUS-BAR

WITH PLEXIGLASS COVER (STENCILED “TMGB”), WALL-MOUNTED

ON INSULATED STANDOFFS. TMGB SHALL BE INSTALLED IN THE

SERVICE ENTRANCE ROOM.

B. MULTIPLE PRE-DRILLED MINIMUM 24” X 2” X ¼” SOLID COPPER

BUS-BAR WITH PLEXIGLASS COVER (STENCILED “TGB”),

WALL-MOUNTED ON INSULATED STANDOFFS. INSTALL A MINIMUM

OF ONE IN EACH TELECOMMUNICATIONS ROOM, EQUIPMENT

ROOM, AND AS REQUIRED THROUGHOUT THE SPACE.

4. THE TMGB SHALL BE PROVIDED WITH A CONTINUOUS COPPER BONDING

CONDUCTOR BONDED TO THE MAIN ELECTRICAL SERVICE GROUND

LOCATED IN THE BUILDING'S ELECTRICAL SERVICE ROOM AS SPECIFIED

BY THE ELECTRICAL ENGINEER.

5. A CONTINUOUS TELECOMMUNICATIONS BONDING BACKBONE SHALL

ROUTE FROM THE TMGB TO THE FARTHEST TGB LOCATED WITHIN THE

BUILDING'S TECHNOLOGY SPACES.

6. WHERE POSSIBLE THE TBB SHALL BE INSTALLED AS A SINGLE

CONTINUOUS CONDUCTOR WITHOUT SPLICES. WHERE INSTALLATION OF

A SINGLE CONTINUOUS TBB CONDUCTOR IS NOT POSSIBLE OR

PRACTICAL THE NUMBER OF SPLICES SHALL BE KEPT TO A MINIMUM.

WHERE NECESSARY, SPLICES SHALL BE MADE ACCESSIBLE WITHIN THE

TECHNOLOGY SPACES. JOINED SEGMENTS SHALL BE CONNECTED

USING EXOTHERMIC WELDING, IRREVERSIBLE COMPRESSION-TYPE

CONNECTORS, OR EQUIVALENT.

7. ALL INTERMEDIATE TGB'S LOCATED THROUGHOUT THE BUILDING SHALL

BE ATTACHED TO THE TBB WITH A SHORT SEGMENT CONDUCTOR EQUAL

TO THE TBB WITH A TWO-HONE IRREVERSIBLE COMPRESSION TYPE

CONNECTOR TERMINATING AT THE BUS-BAR AND CONNECTED TO THE

TBB USING EXOTHERMIC WELDING, IRREVERSIBLE COMPRESSION-TYPE

CONNECTORS, OR EQUIVALENT.

8. ALL CONNECTIONS MADE TO THE RESPECTIVE BUS-BARS SHALL BE

ACCOMPLISHED WITH A TWO-HOLE GROUNDING LUG THAT IS

PERMANENTLY ATTACHED (HYDRAULICALLY CRIMPED) TO THE LEADING

CONDUCTOR.

9. ALL BUS-BARS SHALL BE POSITIONED TO THE SIDE OF THE LOCAL PANEL

BOARD SERVING THE DEDICATED EQUIPMENT POWER (WHEN PROVIDED

WITHIN THE ROOM). BOND THE TMGB/TGBS TO THE LOCAL PANEL'S

ACEG BUS (WHERE PROVIDED). OTHERWISE, BOND EACH BUS-BAR TO

THE METAL FRAME OF THE BUILDING USING A MINIMUM #6 AWG OR

LARGER CONDUCTOR (BASED ON LENGTHS DEFINED WITHIN THE

STANDARDS.

10. INTERIOR WATER PIPES SHALL NOT BE USED AS AN APPROVED

GROUNDING POINT FOR ANY OF THE REFERENCED BUILDING BONDING

CONDUCTORS.

11. ALL METALLIC CONDUITS, EQUIPMENT RACKS, EQUIPMENT CABINETS,

LADDER RACK, METALLIC BACKBONE CABLE SHEATH COMPONENTS,

ENTRANCE PROTECTION UNITS AND CABLE TRAY ENTERING OR LOCATED

WITHIN THE VARIOUS TECHNOLOGY SPACES SHALL BE BONDED TO THE

TMGB/TGB WITH A MINIMUM #6 AWG STRANDED, INSULATED (GREEN)

GROUNDING CONDUCTOR.

12. ALL BUS-BARS, ATTACHED CONDUCTORS AND SPLICE POINTS SHALL BE

LABELED IN ACCORDANCE WITH ANSI/TIA-606-A ADMINISTRATION

STANDARD FOR COMMERCIAL TELECOMMUNICATIONS INFRASTRUCTURE.

13. CABLE TRAYS / CABLE RUNWAY (LADDER RACK) SHALL BE GROUNDED

USING A MINIMUM #6 AWG STRANDED GROUNDING CONDUCTOR.

14. EACH SEGMENT OF THE CABLE TRAYS / CABLE RUNWAY (LADDER RACK)

SHALL BE BONDED TOGETHER USING A MINIMUM #6 AWG STRANDED

GROUNDING CONDUCTOR OR MANUFACTURER APPROVED GROUNDING

STRAP.

15. EACH GROUNDING / BONDING CONDUCTOR ATTACHED TO THE TMGB/TGB

SHALL BE CONNECTED USING AN INDIVIDUAL LUG. MULTIPLE

CONDUCTORS TERMINATED IN A SINGLE LUG SHALL NOT BE ALLOWED.

16. “DAISY-CHAINING” OF CONDUCTORS SHALL NOT BE ALLOWED.

17. ALL LUGS ATTACHED TO THE TMGB/TGB SHALL BE INDIVIDUALLY BOLTED

TO THE BUS-BAR. MULTIPLE LUGS CONNECTED USING A SINGLE SET OF

BOLT HOLES SHALL NOT BE ALLOWED.

19. GROUNDING SHALL COMPLY WITH ANSI/TIA 607-B

1. CONTRACTOR SHALL IDENTIFY ALL CABLING USED FOR TELECOMMUNICATIONS PRIOR TO DEMOLITION.

2 CONTRACTOR SHALL MARK, IDENTIFY AND PROTECT ALL CABLING USED FOR TELECOMMUNICATIONS PRIOR TO DEMOLITION.

3. CONTRACTOR SHALL NOT DISCONNECT, CUT OR REMOVE ANY CABLING USED FOR TELECOMMUNICATIONS WITHOUT PRIOR

CONSENT FROM THE NATIONAL PARK SERVICE.

A/E - ARCHITECT / ENGINEER (DESIGNER)

AFC - ABOVE FINISHED CEILING

AFF - ABOVE FINISHED FLOOR

AFP - ABOVE FINISHED PLATFORM

AHJ - AUTHORITY HAVING JURISDICTION

ANSI - AMERICAN NATIONAL STANDARDS

INSTITUTE

AS - ABOVE SLAB

A/V - AUDIOVISUAL

BFC - BELOW FINISHED CEILING

BICSI - BUILDING INDUSTRY CONSULTING

SERVICE INTERNATIONAL

BSSH - BUILDING STANDARD SWITCH HEIGHT

BSRH - BUILDING STANDARD RECEPTACLE

HEIGHT

CLG - CEILING

EC - EMPTY CONDUIT

GND - GROUND

HH - HAND HOLE

ID - INSIDE DIAMETER

IDF - INTERMEDIATE DISTRIBUTION FRAME

IEEE - INSTITUTE OF ELECTRICAL AND

ELECTRONICS ENGINEERS

IP - INTERNET PROTOCOL

ISP - INSIDE PLANT CABLE

IT - INFORMATION TECHNOLOGY

ITSIMM - INFORMATION TRANSPORT SYSTEMS

INSTALLATION METHODS MANUAL

LOMMF - LASER OPTIMIZED MULTIMODE OPTICAL

FIBER

MC - MAIN CROSS CONNECT

MH - MAINTENANCE HOLE

MPOE - MINIMUM POINT OF ENTRY

MTER - MAIN TELECOMMUNICATIONS

EQUIPMENT ROOM

NDRM - NETWORK DESIGN REFERENCE MANUAL

NEC - NATIONAL ELECTRIC CODE

NEMA - NATIONAL ELECTRICAL

MANUFACTURERS ASSOCIATION

NESC - NATIONAL ELECTRIC SAFETY CODE

NFPA - NATIONAL FIRE PROTECTION

ASSOCIATION

NIC - NOT IN CONTRACT

OC - ON CENTER

OD - OUTSIDE DIAMETER

OFE - OWNER FURNISHED EQUIPMENT

OSP - OUTSIDE PLANT CABLE

OSPRDM - OSP DESIGN REFERENCE MANUAL

PB - PULL BOX

POE - POWER OVER ETHERNET

RCDD - REGISTERED COMMUNICATIONS

DISTRIBUTION DESIGNER

ROHS - RESTRICTION OF HAZARDOUS

SUBSTANCES.

RW - RACEWAY

SCTP - SCREENED TWISTED PAIR

SMF - SINGLEMODE OPTICAL FIBER

SSER - SATELLITE SERVICE ENTRANCE ROOM

STP - SHIELDED TWISTED PAIR

TDMM - TELECOMMUNICATIONS DISTRIBUTION

METHODS MANUAL

TDR - TIME DOMAIN REFLECTOMETER

TEMP - TEMPORARY

TGB - TELECOMMUNICATIONS GROUNDING

BUSBAR

TIA - TELECOMMUNICATIONS INDUSTRY

ASSOCIATION

TMGB - TELECOMMUNICATIONS MAIN

GROUNDING BUSBAR

TR - TELECOMMUNICATIONS ROOM

TSER - TELECOMMUNICATIONS SERVICE

ENTRANCE ROOM

TYP - TYPICAL

UL - UNDERWRITERS LABORATORY

UNO - UNLESS OTHERWISE NOTED

UPS - UNINTERRUPTABLE POWER SUPPLY

UTP - UNSHIELDED TWISTED PAIR

WDRM - WIRELESS DESIGN REFERENCE MANUAL

WOA - WORK AREA OUTLET

WP - WATERPROOF

WW - WIREWAY

1. TELECOMMUNICATIONS OUTLETS FOR NATIONAL PARK SERVICES ARE DESIGNATED THE LETTER "N".

2. TELECOMMUNICATIONS OUTLETS FOR JNPA ARE DESIGNATED THE LETTER "J".

3. TELECOMMUNICATIONS OUTLETS FOR METRO ARE DESIGNATES THE LETTER "M".

4. TELECOMMUNICATIONS OUTLETS FOR AUDIOVISUAL ARE DESIGNATED THE LETTER "A".

5. TELECOMMUNICATIONS OUTLETS FOR SECURITY ARE DESIGNATED THE LETTER "S".

EXAMPLES:

WALL MOUNTED OUTLET FOR NATIONAL PARK SERVICE

CEILING MOUNTED OUTLET FOR JNPA

FLOOR MOUNTED OUTLET FOR METRO

DEFINES THE OUTLET CONFIGURATION

1. ALL AV OUTLETS MARKED A-B, A-C, OR A-D WILL REQUIRE A 20' PATCH CORD FROM OUTLET INTO MILLWORK.

05/13/2016 RFI #895, RFP #199

M L

2 05/25/2016 RFI #884, RFP #199

05/25/2016 RFI #819, RFP #199

07/06/2016 RFI 882, RFP 246

05/25/2016 RFI #895, RFP #1991

RFI #811

01/15/2016 RFP #082 - JNPA DATA NEEDS1

BUILDING GROUNDING

ELECTRODE SYSTEM

(BY OTHERS)

TGB 1 (BY OTHERS)

EQUIPMENT RACKS LADDER RACK

PANELS SERVING

TELECOM ROOMS

ALL TELECOM

SLEEVES AND

RACEWAYS

TYPICAL EQUIPMENT BONDED

TO ALL TGB'S AND TMGB

(TYPICAL FOR ALL FLOORS IN

CONTRACT)

N-POP / TR-2A

GROUNDING CONDUCTOR SIZING

LINEAR LENGTH (ft) CONDUCTOR SIZE (AWG)

LESS THAN 13 6

14-20 4

21-26 3

27-33 2

34-41 1

42-52 1/0

53-66 2/0

67-84 3/0

CABLE TRAY

MINIMUM #6 AWG COPPER BONDING

CONDUCTOR IN GREEN INSULATED

JACKET

(TYPICAL FOR ALL - SEE TABLE)

BUILDING POWER SYSTEM

MAIN GROUND BUS - ROOM 1EC1

BONDING

CONDUCTOR FOR

TELECOMMUNICATIONS

MIN. SIZE #3/0 AWG

TELECOMMUNICATIONS MAIN

GROUNDING

BUSBAR (TMGB) LOCATED IN TT-302

TELECOMMUNICATIONS BONDING

BACKBONE (TBB) SIZED PER

GROUNDING CONDUCTOR SIZING

TABLE, MIN. SIZE #2 AWG

IRREVISIBLE COMPRESSION

CONNECTOR

TELECOMMUNICATIONS BONDING

BACKBONE CONDUCTOR, SIZED

PER CONDUCTOR SIZING TABLE.

MIN. SIZE #2 AWG BARE

COPPER BONDING

CONDUCTOR (TYP.)

THIS CONNECTION IS NOT REQUIRED

FOR SLEEVES OR RACEWAYS

BONDED TO THE TBB OR GE. SEE

NOTE 3.

CADWELD

BUILDING STEEL

(IF AVAILABLE)

GROUNDING NOTES:

1. ALL BUSBARS SHALL BE SIZED PER SPECIFICATION 27 05 26 (UON) PRE-DRILLED TIN-PLATED COPPER. MOUNT ON WALL WITH 2" STANDOFF INSULATORS AND

PLEXIGLASS.

2. ALL CABLE CONNECTIONS TO TGB'S ARE TWO HOLE LONG BARREL COMPRESSION LUGS, UNLESS OTHERWISE NOTED.

3. BONDING CONDUCTORS SHALL GENERALLY BE RUN OPEN WITH PLASTIC SUPPORTS. WHERE RUN IN STEEL CONDUITS LONGER THAN 36", BOND CONDUIT TO TBB OR GE

AT BOTH ENDS.

4. BONDING CONDUCTORS SHALL BE RUN WITHOUT SPLICES WHEREVER POSSIBLE. ANY SPLICES MUST BE MADE WITH NON-REVERSIBLE COMPRESSION CONNECTORS

OR CADWELD.

5. BONDING CONDUCTORS SHALL BE COPPER CONDUCTORS WITH GREEN INSULATION OR DISTINCTIVE GREEN MARKING, UNLESS OTHERWISE NOTED.

6. THE SIGNAL GROUNDING SYSTEM SHALL BE TIED TO THE INCOMING BUILDING ELECTRICAL SAFETY GROUND AT THE PRIMARY TRANSFORMER NEUTRAL BOND, AND/OR

AT THE NEUTRAL BOND OF ANY SEPARATELY DERIVED SOURCE IN ACCORDANCE WITH APPLICABLE CODE. THE SYSTEM GROUND RESISTANCE SHALL BE LESS THAN 5.0

OHMS. THIS SYSTEM SHALL BE DESIGNED AND INSTALLED IN ACCORDANCE WITH ANSI/TIA-607-B, GENERIC TELECOMMUNICATIONS BONDING AND GROUNDING (EARTHING)

FOR CUSTOMER PREMISE, AUGUST 2012 AND ANSI/TIA-607-B-1, GENERIC TELECOMMUNICATIONS BONDING AND GROUNDING (EARTHING) FOR CUSTOMER PREMISE., ADDENDUM 1, EXTERNAL GROUNDING, JANUARY 2013,

7. NO SPLICE SHALL BE MADE TO A BACKBONE OR BONDING CONDUCTOR WITHOUT PRIOR APPROVAL OF THE CONTRACTING OFFICER.

85-105 4/0

106-125 250 kcmil

126-150 300 kcmil

151-175 350 kcmil

176-250 500 kcmil

251-300 600 kcmil

GREATER THAN 300 750 kcmil

NOTE:

THE MINIMUM SIZE FOR A

TELECOMMUNICATIONS BONDING

BACKBONE CONDUCTOR IS #2 AWG.

T

Y

P

A

S

R

E

Q

U

I

R

E

D

1"

1 1/8"

2" HIGH RED

STENCILED LETTERING

CLEAR 3/8" THICK

PLEXIGLASS COVER

5/8"-11 x 1-1/2" CONT.

THREADED ROD (TYP)

2-3/4" INSULATOR

9/16" (40) PLACES

5/8-11x1" H.H.C.S.

2-3/4"INSULATOR

7/16" DIA. (20) PLACES

2-3/4"INSULATOR

5/8" DIA.

5/8-11x1" H.H.C.S.

LOCKWASHER

5/8"DIA. (TYP.)

T

G

B

R

A

D

I

U

S

THE RADIUS ON ANY

BEND SHALL NOT BE

LESS THAN 8 INCHES

THE ANGLE OF ANY

BEND SHALL NOT BE

LESS THAN 90 DEGREES

D

G

R

E

S

M

I

N

I

M

U

M

001 - 444 - 5

01 - 033 - 125 - 2

SHEET INDEX: REFER TO TECHNOLOGY INSTALLATION

NOTES, THIS SHEET, FOR DESCRIPTIONS OF DRAWING

AND SPECIFICATION NAMING STRUCTURE FOR RELATED

SYSTEMS SUCH AS T###, TT AND TY SERIES DRAWINGS.

T-000 COVER SHEET TECHNOLOGY

T-001 SITE PLAN - TECHNOLOGY

T-002 MAIN LEVEL EXISTING FLOOR PLAN

T-003 NORTH AND SOUTH LOWER LOADING PLAN

T-002D MAIN LEVEL DEMOLITION PLAN

T-100 MAIN LEVEL FLOOR PLAN

T-101 MEZZANINE LEVEL FLOOR PLAN

T-102 ENTRY LEVEL FLOOR PLAN

T-103 COURT HOUSE BASEMENT FLOOR PLAN

T-120 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-121 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-122 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-130 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-131 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-132 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-133 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-134 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-135 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-136 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-137 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-138 TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-200 ENLARGED MAIN FLOOR PLANS

T-300 TECHNOLOGY DETAILS

T-301 TECHNOLOGY DETAILS

T-302 TECHNOLOGY DETAILS

T-303 TECHNOLOGY DETAILS

T-304 TECHNOLOGY DETAILS

T-400 TECHNOLOGY RISERS

T-401 TECHNOLOGY RISERS

T-402 TECHNOLOGY RISERS

T-403 TECHNOLOGY RISERS

T-404 TECHNOLOGY RISERS

T-405 TECHNOLOGY RISERS

T-406 TECHNOLOGY RISERS

T-500 TECHNOLOGY SCHEDULES

T-501 TECHNOLOGY SCHEDULES

1. "1/T302" INDICATES DETAIL NUMBER / SHEET NUMBER.

2. "SC-SEC-1" INDICATES GENERAL TECHNOLOGY EQUIPMENT SCHEDULE ITEM LABELED

AS "EQUIPMENT LIST ABBREVIATION.".

3. " " INDICATES KEYED NOTE USED TO DESCRIBE ADDITIONAL INFORMATION OF

WORK REQUIRED, SPECIFIC TO THE SHEET AND/OR DETAIL IT IS SHOWN WITH.

4. ABBREVIATION KEY:

T.C. TELECOMMUNICATIONS CONTRACTOR, WORK DEFINED IN TT SERIES

DRAWINGS

E.C. ELECTRICAL CONTRACTOR

S.C. SECURITY CONTRACTOR, WORK DEFINED IN TY AND T### SERIES DRAWINGS

N.C. NETWORK CONTRACTOR, WORK DEFINED BY THESE DRAWINGS, T-###

SERIES

AFF ABOVE FINISH FLOOR

TYP TYPICAL

+#" MOUNTING HEIGHT FROM FINISHED FLOOR TO CENTERLINE

NPS NATIONAL PARK SERVICE

DAS DISTRIBUTED ANTENNA SYSTEM

UPS UNINTERRUPTIBLE POWER SUPPLY

RC RADIO CONTRACTOR, DAS AND WI-FI

5. MOUNTING SUBSCRIPT KEY:

1. REFER TO MATERIAL LIST AND SPECIFICATIONS FOR FULL DESCRIPTIONS AND

MANUFACTURERS OF ALL DEVICES.

6. LINE TYPE KEY:

NEW WORK BY THIS CONTRACTOR (DARK SOLID LINE)

NEW WORK UNDERFLOOR OR UNDERGROUND BY THIS

CONTRACTOR (DARK LONG DASHED LINE)

NEW WORK BY OTHERS AND/OR EXISTING TO REMAIN

(LIGHT SOLID LINE)

EXISTING TO BE REMOVED BY THIS CONTRACTOR

(DARK SHORT DASHED LINE)

GENERAL TECHNOLOGY NOTES:

TECHNOLOGY INSTALLATION NOTES:

TECHNOLOGY DEMOLITION NOTES:

TELECOM ROOM REFERENCES

1. THE TECHNOLOGY DRAWINGS INDICATE EXISTING TECHNOLOGY ITEMS TO BE

REMOVED. THE DRAWINGS ARE INTENDED TO INDICATE THE SCOPE OF WORK

REQUIRED AND DO NOT INDICATE EVERY BOX, CONDUIT, OR WIRE THAT MUST BE

REMOVED.

2. ITEMS (i.e., SPEAKERS, SWITCHES, ETC) REMOVED AND NOT RELOCATED REMAIN THE

PROPERTY OF THE CONTRACTING OFFICER. THE CONTRACTOR SHALL BE

RESPONSIBLE FOR THE DISPOSAL OF MATERIAL THE CONTRACTING OFFICER DOES

NOT WANT TO REUSE OR RETAIN. (i.e., FOR MAINTENANCE PROPOSES)

3. THE CONTRACTOR SHALL OBTAIN APPROVAL FROM THE CONTRACTING OFFICER

BEFORE TURNING OFF THE POWER TO EQUIPMENT, SYSTEMS, PANELS, ETC.

COORDINATE ALL OUTAGES WITH CONTRACTING OFFICER. CONDUIT CONCEALED IN

WALL MAY BE ABANDONED IN PLACE IF NOT AFFECTED BY OTHER CONSTRUCTION.

4. ALL CONDUIT SHALL BE REMOVED WHERE WALLS ARE BEING REMOVED. WHERE

CONDUIT IS IN THE CONCRETE SLAB, CUT OFF FLUSH, PULL OUT WIRE, AND PLUG.

WHERE CONDUIT IS RUN EXPOSED, ALL ASSOCIATED CLAMPS, SUPPORTS, HANGERS,

ETC., SHALL ALSO BE REMOVED.

5. THIS CONTRACTOR SHALL COORDINATE ALL HIS WORK WITH OTHER CONTRACTORS AT

THE JOB SITE BEFORE REMOVING EXISTING ELECTRICAL AND INSTALLING NEW ITEMS.

6. EXISTING CONDUIT IN GOOD CONDITION MAY BE REUSED IN PLACE. RELOCATED

EXISTING CONDUIT SHALL NOT BE ALLOWED. BONDING CONDUCTORS SHALL BE

INSTALLED IN ALL REUSED CONDUIT TO ASSURE PROPER GROUND PATH.

7. EQUIPMENT REMOVAL IN CERTAIN LOCATIONS MAY REQUIRE THE INSTALLATION OF A

JUNCTION BOX TO RECONNECT CIRCUITS THAT REMAIN IN OPERATION EXTEND

CONDUIT AND WIRING AS REQUIRED TO MAINTAIN POWER TO REMAINING EQUIPMENT.

8. TECHNOLOGY DEVICES TO BE REMOVED SHALL HAVE ALL CONNECTED WIRING

REMOVED TO THE SOURCE.

9. DEVICES NOT TO BE REMOVED SHALL BE PROTECTED FROM THE ENVIRONMENT, AND

ALL CABLE/RACEWAYS ARE TO REMAIN AND BE PROTECTED. T.C. SHALL BE

RESPONSIBLE FOR REPAIR OF ANY INTERRUPTIONS TO PROTECTED DEVICES.

SYMBOL EQUIPMENT LIST ABBREVIATION DESCRIPTION NOTES:

TECHNOLOGY SYMBOL LIST

GENERAL NOTES:

1. ALL SYMBOLS AND ABBREVIATIONS LISTED MAY NOT BE APPLICABLE TO THIS PROJECT. REFER TO THE

TECHNOLOGY EQUIPMENT SCHEDULE FOR MORE COMPLETE DESCRIPTION AND ITEMS.

2. ALL SYMBOLS AND ABBREVIATIONS REFER TO TECHNOLOGY SHEETS ONLY AS DEFINED ON THE SHEET INDEX.

REFER TO THE GENERAL TECHNOLOGY NOTES FOR ADDITIONAL INFORMATION.

WALL MOUNT,

DIRECTIONAL

WIRELESS ACCESS POINT (WALL MOUNT)SC-WAP-W

WAP

DISTRIBUTED ANTENNA SYSTEM ANTENNA (TYPE 1)DAS-ANT-1

DA1

DISTRIBUTED ANTENNA SYSTEM ANTENNA (TYPE 2)DAS-ANT-2

NA FLOOR RACK

DAS-ANT-3

DISTRIBUTED ANTENNA SYSTEM ANTENNA (TYPE 3)

ER

DAS-ER

EQUIPMENT RACK ENCLOSURE, WALL MOUNT

DIP

DAS-DIP

DISTRIBUTED ANTENNA SYSTEM DIPOLE ANTENNA

ROU

DAS-ROU

DISTRIBUTED ANTENNA SYSTEM REMOTE OPTICAL

UNIT

DUP

DAS-DUP

RADIO TRANSMITTER AND DUPLEXER

DAS

DAS-CTRL

DISTRIBUTED ANTENNA SYSTEM CONTROL

RPT

DAS-RPT

DISTRIBUTED ANTENNA SYSTEM REPEATER

WAP

DA4

DAS-ANT-4

DISTRIBUTED ANTENNA SYSTEM ANTENNA (TYPE 4)

WIRELESS ACCESS POINT (CEILING MOUNT)SC-WAP-C

DA2

DA3

DA5

DAS-ANT-5

DISTRIBUTED ANTENNA SYSTEM ANTENNA (TYPE 5)

DAE NA

DISTRIBUTED ANTENNA SYSTEM ANTENNA, EXISTING

TO BE REMOVED

CEIL. MOUNT,

OMNI DIR.

POLE MOUNT,

YAGI

CEIL. MOUNT,

OMNI DIR.

POLE MOUNT,

YAGI

1. RELATED DRAWINGS:

T-### SERIES: THIS SET, TECHNOLOGY, WHICH DEFINES THE PROVISIONING AND

INSTALLATION OF 1) NETWORK ELECTRONIC EQUIPMENT FOR THE NPS DATA NETWORK, 2)

NETWORK ELECTRONIC EQUIPMENT FOR THE SECURITY NETWORK, 3) VIDEO SURVEILLANCE

RECORDING AND CONTROL, 4) DAS AND WI-FI SYSTEMS, 5) ANALOG PHONE LINE

REQUIREMENTS AND 6) AT&T NET POP CROSS CONNECTION REQUIREMENTS.

T### SERIES: SITE TECHNOLOGY WHICH INCLUDES CABLING AND DEVICES WHICH TERMINATE

TO EQUIPMENT DEFINED IN T-###, TT AND TY SERIES DRAWINGS. T### SERIES DRAWINGS

GENERALLY INCLUDE, BUT ARE NOT LIMITED TO: HORIZONTAL CABLING FOR EXTERIOR SITE

TELECOMMUNICATIONS NEEDS TO TERMINATION POINTS AT OSP/ISP (PLENUM) LOCATIONS,

PROVISIONING AND INSTALLATION OF SITE TECHNOLOGY DEVICES SUCH AS SURVEILLANCE

CAMERAS.

TY-### SERIES:INTERIOR SECURITY DRAWINGS WHICH GENERALLY INCLUDE, BUT ARE NOT

LIMITED TO PROVISIONING AND INSTALLATION OF INTERIOR SECURITY DEVICES SUCH AS

SURVEILLANCE CAMERAS AND ACCESS CONTROL SYSTEMS.

TT-### SERIES: TELECOMMUNICATIONS DRAWINGS WHICH GENERALLY

INCLUDE, BUT ARE NOT LIMITED TO, INTERIOR STRUCTURED CABLING, RACKS, ENCLOSURES

AND HORIZONTAL CABLING FOR GENERAL TELECOMMUNICATIONS AND SECURITY SYSTEMS.

2. SPECIFICATIONS ASSOCIATED WITH T-### SERIES, THIS SET, ARE DIVISIONS 27 AND 28.

CONTRACTOR SHALL COORDINATE WITH WORK DEFINED IN T###, TT-### AND TY-### SERIES

DRAWINGS AS WELL AS THE DIVISIONS 27 AND 28 SPECIFICATIONS ASSOCIATED WITH T###,

TT-### AND TY-### SERIES DRAWINGS

3. TELECOMMUNICATIONS ROOMS ARE REFERENCED BY ARCHITECTURAL ROOM NUMBERS.

4. THE COMPLETE INSTALLATION SHALL BE IN ACCORDANCE WITH THE A.D.A.A.C. (AMERICANS

WITH DISABILITIES ACT ACCESSIBLE GUIDELINES)

5. CONCEAL ALL CONDUIT IN WALLS, PARTITIONS, ABOVE CEILING, AND IN FLOOR SLAB, ETC.

UNLESS OTHERWISE INDICATED ON THE PLANS OR IN THE SPECIFICATIONS. CONDUIT IN

MECHANICAL ROOMS, AND STORAGE ROOMS WITHOUT CEILINGS MAY BE EXPOSED ON

BUILDING STRUCTURE.

6. REFER TO ELECTRICAL DRAWINGS FOR CONSOLIDATED RESPONSIBILITY MATRIX FOR THE

VARIOUS CONTRACTORS.

7. CONTRACTOR SHALL VERIFY ALL FURNITURE, MODULAR FURNITURE AND EQUIPMENT

LOCATIONS WITH ARCHITECTURAL PLANS, ELEVATIONS AND REVIEWED SHOP DRAWINGS.

PRIOR TO MAKING THE ACTUAL INSTALLATION THIS CONTRACTOR SHALL ADJUST OUTLETS OR

CONNECTION LOCATIONS TO ACCOMMODATE FURNITURE AND/OR EQUIPMENT.

8. EQUIPMENT SHALL BE MOUNTED TO ALLOW ACCESS TO ELECTRICAL AND MECHANICAL

EQUIPMENT.

9. CONTRACTOR SHALL BE RESPONSIBLE FOR ALL OPENINGS REQUIRED IN WALLS. ALL

OPENINGS SHALL BE REPAIRED TO MATCH EXISTING BY A QUALIFIED CONTRACTOR AT THE

EXPENSE OF THIS CONTRACTOR. ALL CONDUITS THROUGH WALLS SHALL BE GROUTED OR

SEALED INTO OPENINGS.

10. ALL MATERIALS USED TO SEAL PENETRATIONS OF FIRE RATED WALLS AND FLOORS SHALL BE

TESTED AND CERTIFIED AS A SYSTEM PER ASTM E814 STANDARDS FOR FIRE TESTS OF

THROUGH-PENETRATION FIRESTOPS.

11. CONTRACTOR SHALL REMOVE AND REINSTALL ALL CEILING TILES AS REQUIRED FOR THE

EXECUTION OF TECHNOLOGY WORK. CONTRACTOR SHALL REPLACE CEILING TILES WITH

IDENTICAL MATERIAL WHERE DAMAGED BY THIS CONTRACTOR.

12. EXISTING PUBLIC SAFETY AND MAINTENANCE RADIO SYSTEM SHALL HAVE NO DOWNTIME.

TRANSFER OF CABLING RELATED TO THE RADIO SYSTEM SHALL BE COORDINATED WITH

CONTRACTING OFFICER.

13. RADIO CONTRACTOR SHALL COORDINATE FINAL WAP AND DAS ANTENNA LOCATIONS WITH

ARCHITECT. PRE-CONSTRUCTION COVERAGE MAPS WERE CREATED BASED ON LOCATIONS

DEFINED ON THESE DRAWINGS. AS FINAL CONSTRUCTION MAY HAVE AN EFFECT ON

COVERAGE, RADIO CONTRACTOR IS RESPONSIBLE FOR RELOCATION OF WAP AND DAS

ANTENNAS TO OBTAIN DESIRED COVERAGE.

TECHNOLOGY INSTALLATION NOTES:

14. FOR RACKS AND ENCLOSURES DEFINED IN THE TELECOMMUNICATIONS DRAWINGS, THE

DIMENSIONS OF THOSE ITEMS IN THE TELECOMMUNICATIONS DRAWINGS SUPERCEDE THESE

DRAWINGS.

COVER SHEET - TECHNOLOGY

SITE PLAN - TECHNOLOGYSITE PLAN - TECHNOLOGY

T-001

GENERAL NOTES

KEYNOTES

MAIN LEVEL EXISTING FLOOR PLANMAIN LEVEL EXISTING FLOOR PLAN

T-002

MAIN LEVEL FLOOR PLAN -

DEMOLITION

MAIN LEVEL FLOOR PLAN - DEMOLITION

T-002D

WAP

DA1

A-25

WAP

DA4

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UPUP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UP

UPUPUP

MAIN LEVEL FLOOR PLANMAIN LEVEL FLOOR PLAN

T-100

DA1

DAS-A01-11

WAP

NPS-AP-06

NPS-AP-17

NPS-AP-18

WAP

WAP

WAP

NPS-AP-12

DA2

DAS-A-16

UP

UP

UP

U P

TECHNOLOGY - MAIN LEVEL -

PARTIAL PLAN

TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-120

UP

WAP

NPS-AP-05

WAP

NPS-AP-11

WAP

NPS-AP-10

DA1

DAS-A01-09

DAS-A01-13

DA1

DAS-A0110

ROU

DAS-ROU-3

DAS-A01-14

WAP

NPS-AP-16

DA2

DA2

TECHNOLOGY - MAIN LEVEL -

PARTIAL PLAN

TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-130

NPS-AP-14

WAP

NPS-AP-15

DA1

DAS-A01-04

DA1

DAS-A01-03

DAS-ROU-1

ROU

DAS-A01-05

DA1

DAS-A01-02

DAS-A01-01

DAS

WAP

NPS-AP-1

DA2

DA2

TECHNOLOGY - MAIN LEVEL -

PARTIAL PLAN

TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-131

MTRO-AP-01

WAP

NPS-AP-09

DA1

DAS-A01-07

WAP

NPS-AP-07

WAP

NPS-AP-04

WAP

NPS-AP-25

WAP

NPS-AP-13

WAP

NPS-AP-23

WAP

NPS-AP-28

TECHNOLOGY - MAIN LEVEL -

PARTIAL PLAN

TECHNOLOGY - MAIN LEVEL - PARTIAL PLAN

T-132

GENERAL NOTES

/ RFP-082

RISER DIAGRAM, NPS NETWORK SWITCHES, 1TC6

NO SCALE:

RISER DIAGRAM, NPS NETWORK SWITCHES, 1TC4

NO SCALE:

RISER DIAGRAM, NPS NETWORK SWITCHES, 3TC1

NO SCALE:

RISER DIAGRAM, SECURITY NETWORK SWITCHES, 1TC1

NO SCALE:

RISER DIAGRAM, NPS NETWORK SWITCHES, 313

NO SCALE:

TECHNOLOGY RISERS

RISER DIAGRAM, SECURITY NETWORK SWITCHES, 1TC6

NO SCALE:

RISER DIAGRAM, SECURITY NETWORK SWITCHES, 313

NO SCALE:

RISER DIAGRAM, SECURITY NETWORK SWITCHES, 1TC4

NO SCALE:

RISER DIAGRAM, SECURITY NETWORK SWITCHES, 1TC2

NO SCALE:

RISER DIAGRAM, SECURITY NETWORK SWITCHES, 1TC3

5 NO SCALE:

RISER DIAGRAM, SECURITY NETWORK SWITCHES, 3TC1

NPS DATA NETWORK FIBER OPTIC RISER DIAGRAM

NO SCALE:

SECURITY NETWORK FIBER OPTIC RISER DIAGRAM

ANALOG LINES RISER DIAGRAM

EXISITING RADIO SYSTEM RISER DIAGRAM

DAS RISER DIAGRAM

WIRELESS ACCESS POINT SCHEDULEDAS ANTENNA SCHEDULE

NOTES:

1. NPS-AP-# USED FOR A/V MAINTENANCE SHALL BE SEPARATED FROM NPS DATA/IT NETWORK BY A CONTRACTOR CONFIGURED VIRTUAL

LOCAL AREA NETWORK (VLAN)

2. INTERNET SERVICE PROVIDER AND ROUTER TO BE ARRANGED BY CONTRACTING OFFICER.

TECHNOLOGY SCHEDULES

TECHNOLOGY MATERIAL LIST TECHNOLOGY MATERIAL LIST

TECHNOLOGY SCHEDULES