Attachment_J.B-1_Sub_Line_Item_Numbers_(SLINs)_Bid_Schedule.pdf

Base Year Option Year One Option Year Two Option Year Three Option Year Four

1,750,000.00$ 1,750,000.00$ 1,750,000.00$ 1,750,000.00$ 1,750,000.00$

Units of Issue Abreviation Each EA

Lineal Foot LF Package PG

Set SE Pound LB

*** Offerors shall complete the orange cells on each of the worksheets of this J.B-1 and submit with the pro

***The evaluated price is equal to the total of all years plus one half of the fourth option year ***The evaluated price element of this J.B-1 will be removed from the J.B-1 at award

Total of All Years

8,750,000.00$

Evaluated Price 9,625,000.00$ oposal.

SLIN TITLE UNIT

EXTENDED PRICE

BASIC SLIN NOTE

ADDITIONAL LABOR: WA, AK, OR, ID & MT UNIT EXTENDED PRICE

A 200 AA Management Personnel (If outside of SLIN) EA $ - A 200 AB Senior Professional (If outside of SLIN) EA $ - A 200 AC Professional (If outside of SLIN) EA $ - A 200 AD Technician (If outside of SLIN) EA $ - A 200 AE Environmental Worker (If outside of SLIN) EA $ - A 200 AF Administrative Support Worker (If outside of SLIN) EA $ - A 200 AG Technical Editor (If outside of SLIN) EA $ - A 200 AH Water Treatment Plant Operator (If outside of SLIN) EA $ -

MOBILIZATION/DEMOBILIZATION UNIT EXTENDED PRICE

A 210 AA

Mobilization/Demobilization - Puget Sound Region, Washington State

EA $ -

A 210 AB Mobilization/Demobilization - Whidbey Island, Washington EA $ -

A 210 AC Mobilization/Demobilization - Adak, Alaska EA $ -

A 210 AD Field event preparation EA $ - A 210 AE Sample shipping from Adak, AK LB $ -

REPORTS UNIT EXTENDED PRICE

A 220 AA

Tech Memo Simple - Report length of about less than 50 pages, page count not including appendixes

EA $ -

A 220 AB

Tech Memo Medium - Report length 50 to 100 pages, page count not including appendixes EA $ -

A 220 AC

Tech Memo Complex - Report length 100 pages plus

EA $ -

A 220 AD

Tech Reports Simple (3 iterations)- Report length of about less than 50 pages, page count not including appendixes

EA $ -

BASE YEAR SUB-LINE ITEM NUMBERS (SLINS)

(Certified Water Treatment Plant Operator) Hourly rate, all overheads & profit. 1 Hour = 1 Each $ - 100

UNIT PRICE ESTIMATED QUANTITY

(such as Environmental Engineering/Science Technician) Hourly rate, all overheads & profit. 1 Hour = 1 Each $ - 100 (such as secretary/word processor) Hourly rate, all overheads & profit. 1 Hour = 1 Each $ - 50

Below are Fully Burdened Labor Rates.

(Engineers, Associates and below) Hourly rate, all overheads & profit. 1 Hour = 1 Each $ - 100 (such as Drafter, Technical Writer, Engineering Technician) Hourly rate, all overheads & profit. 1 Hour = 1 Each $ - 100

$ - 100(Consulting Engineer, Scientist, Technical Specialist) Hourly rate, all overheads & profit. 1 Hour = 1 Each

SUB-LINE ITEM

NUMBER SLIN DESCRIPTIONS UNIT PRICE

ESTIMATED QUANTITY

(General Manager, Program Manager, Contract Administrator, DQO Process Manager, Quality Control Manager, Certified Industrial Hygienist)

$ - 50 (Sen. Consulting Engineer, Scientist, Technical Specialist) Hourly rate, all overheads & profit. Project Manager includes monitoring and

$ - 100

UNIT PRICE ESTIMATED QUANTITY

Unless specifically addressed as being not included within the SLIN structure, the Contractor is responsible to provide all project management, labor, equipment (including all associated operation & maintenance requirements), tools, material, supplies, site management/coordination, schedule management, decontamination, management and disposal of IDW, site cleanup, data compilation and electronic submittals, field documentation and record keeping, work coordination, project team reporting/communication, sample collection shall include laboratory QA/QC samples and all associated overheads and profit to execute work identified below. All rates are fully burdened. All items shall comply with all health and safety requirements to ensure that the LTM/O&M activities are conducted per the requirements of the current edition of EM-385-1-1, the base contract, and contract task order (CTO)/site safety documents. All items shall be performed in accordance with applicable Federal, State, Department of Defense, Navy, NAVFAC NW, and local regulations, requirements, and Standard Operating Procedures (SOP)s.

All mobilization/demobilization, coordination, facility access, shipping (excluding sample shipping), facility IDW planning, any excavation permitting, any special inspections, transportation to and from site field event involving movement of heavy equipment, and all other mobilization required for execution, to support sites on support Adak, Alaska. $ -

To prepare a technical summary report/document presenting in text, tabular, and graphic formats as determined by requirements and guidelines for the report type. The report includes, but is not limited to, results from field and analytical measurements, inspections, performance assessments, and work completions/closeouts. This item includes one iteration of two copies, and two iterations of five copies each (internal

All mobilization/demobilization transportation to and from site field event involving movement of heavy equipment, and all other mobilization required for execution, to support Navy sites in the Puget Sound Region, Washington excluding Whidbey Island in conformance with the base contract Section C7.1.

$ - 10 All mobilization/demobilization, transportation to and from site field event, and all other mobilization required for execution, to support Navy sites on Whidbey Island, Washington in conformance with the base contract Section C7.1. $ - 5

$ - 2

$ - 3

$ - 2

PRICE ESTIMATED QUANTITY

To prepare a technical summary report/document presenting in text, tabular, and graphic formats as determined by requirements and guidelines for the report type. The report includes, but is not limited to, results from field and analytical measurements, inspections, performance assessments, and work completions/closeouts. This item includes two iterations of five Navy copies each (internal copies are the responsibility of the contractor), draft and final with one round of review, comment, and comment resolution. Upon completion of document, and incorporation of all Navy project manager approved comment responses, provide copies to Navy, regulators, and other stakeholders as directed.

Technical editing, graphics, reproduction, organizing features, and GIS compatibility formatting (for electronic versions) are required in this item.

Electronic deliverables will be required with final submittal per regulatory requirements, NAVFAC NW SOP and guidelines. Includes printing/reproduction.

Shipping costs for samples from Adak to laboratory $ - 10

Includes site coordination, facility access, shipping (excluding sample shipping), facility IDW planning, any excavation permitting.

A 220 AE

Tech Reports Medium (3 iterations)- Report length 50 to 100 pages, page count not including appendixes

EA $ -

A 220 AF

Tech Reports Complex (3 iterations) - Report length 100 pages plus

EA $ -

A 220 AG Health & Safety Plan EA $ -

A 220 AH Quality Control Plan EA $ -

A 220 AI De Minimus Plan Revision/Update EA $ -

A 220 AJ Addenda/Correction for Existing Document EA $ - A 220 AK Reproduction 8.5 x 11 EA $ - A 220 AL Reproduction 8.5 x 11 Color EA $ - A 220 AM Electronic on CD EA $ -

MEETINGS UNIT EXTENDED PRICE

A 230 AA

Preconstruction/Mutual Understanding Meetings

EA $ -

To prepare a plan that shall include all health and safety requirements to ensure that the LTM activities are conducted per the requirements of the EM-385-1-1, the base contract, and the site. The plan shall present in text, tabular, and graphic formats as determined by requirements/format of the EM 385-1-1 and NAVFAC NW guidelines for the report type. The report includes the Accident Prevention Plan (APP), Site Safety and Health Plan (SSHP), and Activity Hazard Analysis(s) (AHA). This item includes two iterations of five copies each (internal copies are the responsibility of the contractor), draft and final with one round of review, comment, and comment resolution. Upon completion of document, and incorporation of all Navy safety officer (or designee) approved comment responses, provide copies to Navy as directed.

Technical editing, graphics, reproduction, organizing features, and GIS compatibility formatting (for electronic versions) are required in this item.

Electronic deliverables will be required with final submittal per regulatory requirements, NAVFAC NW SOP and guidelines. Includes printing/reproduction

$ - 4 copies are the responsibility of the contractor), internal draft, draft, and final with one round of Navy internal review, one round of review, two sets of comments, and two sets of comment resolutions. Upon completion of document, and incorporation of all Navy project manager approved comment responses, provide copies to Navy, regulators, and other stakeholders as directed.

Technical editing, graphics, reproduction, organizing features, and GIS compatibility formatting (for electronic versions) are required in this item.

Electronic deliverables will be required with final submittal per regulatory requirements, NAVFAC NW SOP and guidelines. Includes printing/reproduction.

$ - 2

$ - 50

$ - 4

To prepare a plan that shall include all quality control requirements to ensure that the LTM activities are conducted per the requirements of regulations, the base contract, site decision documents, and other relevant specifications. The plan shall be presented in text, tabular, and graphic formats as determined by requirements and guidelines for the report type. The report includes, Sampling and Analysis Plan (SAP), Quality Assurance Project Plan (QAPP) or other relevant requirements. This item is assumed to include the SAP/QAPP full format version.

This item includes one iteration of three copies, and two iterations of five copies each (internal copies are the responsibility of the contractor), internal draft, draft, and final with one round of Navy internal review, one round of review, two sets of comments, and two sets of comment resolutions. Upon completion of document, and incorporation of all Navy project manager approved comment responses, provide copies to Navy, regulators, and other stakeholders as directed. Technical editing, graphics, reproduction, organizing features, and GIS compatibility formatting (for electronic versions) are required in this item. Electronic deliverables will be required with all submittals per regulatory requirements, NAVFAC NW SOP and guidelines, and Navy project manager requirements. Includes printing and reproduction

$ - 4

To prepare a technical summary addenda/correction of an existing document (i.e. SAP/QAPP, APP/SSHP, Tech Report) presenting in text, tabular, and graphic formats as determined by requirements and guidelines for the report type. The addenda/correction includes two iterations (internal copies are the responsibility of the contractor), draft and final with one round of review, comment, and comment resolution. This addenda/correction is assumed to be ten (or less) pages of new material. Upon completion of document, and incorporation of all Navy project manager approved comment responses, provide copies to Navy, regulators, and other stakeholders as directed.

Technical editing, graphics, reproduction, organizing features, and GIS compatibility formatting (for electronic versions) are required in this item.

Electronic deliverables will be required with final submittal per regulatory requirements, NAVFAC NW SOP and guidelines. Includes printing/reproduction

$ - 2

An existing document revision/update that does not impact technical content of the document (i.e. SAP/QAPP, APP/SSHP, Tech Report). The revision/update includes two iterations (internal copies are the responsibility of the contractor), draft and final with one round of review, comment, and comment resolution. This revision/update is assumed to be limited to changes equivalent to pen & ink changes e.g. updating headers and footers, the cover page, personnel changes, etc. Upon completion of document, and incorporation of all Navy project manager approved comment responses, provide copies to Navy, regulators, and other stakeholders as directed. Graphics, reproduction, organizing features, and GIS compatibility formatting (for electronic versions) are required in this item. Electronic deliverables will be required with final submittal per regulatory requirements, NAVFAC NW SOP and guidelines. Includes printing/reproduction.

For Non-Pre Priced SLINs

PRICE

For Non-Pre Priced SLINs $ - 25000 For Non-Pre Priced SLINs $ - 2500

ESTIMATED

To plan, prepare for, attend, and provide draft/final minutes of a 2 hour technical preconstruction/prefield event or MUM to be held by the Navy in preparation for project field work. This SLIN includes attendance by contractor representatives for Project Management, Quality Control, Site Health and Safety, and Technical expertise as necessary (as determined by the Navy PM & NTR).

A 230 AB Technical Meetings - 4 hours EA $ -

A 230 AC Technical Meetings - 8 hours EA $ -

LTMOM OF IR SITES UNIT

EXTENDED PRICE

A 240 AA Bangor Site A EA $ - A 240 AB Bangor Site F EA $ - A 240 AC Whidbey Area 6 EA $ - A 240 AD Adak Free Product Recovery, Operable Unit (OU) A EA $ - A 240 AE Adak LTM/IC, OU A EA $ - A 240 AF Point McIntyre LTM-O EA $ - A 240 AG Barrow AK, LTM/O&M, Naval Arctic Research Laboratory EA $ -

A 240 AH

Bremerton (BNC) LTM/O&M, OU A, B Terrestrial, C, D, NSC & PMP

EA $ -

A 240 AI NAVMAG Indian Island LTM/LTO EA $ - A 240 AJ Jackson Park LTM/LTO EA $ -

A 240 AK Keyport Phytoremediation O&M EA

$ - 1 See Attachment J of the base contract for description of work.

See Attachment K of the base contract for description of work.

See Attachment L of the base contract for description of work.

Contractor shall monitor and maintain the two phytoremediation plantations as stipulated in the most current version of the Keyport Operations and Maintenance Plan. Each phytoremediation plantation is approximately 1 acre in size and contains hybrid Poplar trees. Phytoremediation plantation maintenance shall include tree inspections to identify the presence of damage, disease, infestation or stress, weed control and nurturing activities at the direction of the NAVFAC Northwest RPM that may include thinning and pruning and/or irrigation using the installed irrigation system. Weed control will involve removal of weeds from between the rows of trees and in a 5 foot buffer around the plantations.

Normal weeds include, but are not limited to, grasses, dandelions, blackberry, ivy, holly, Scotch broom, salmonberry, laurel, and small maple and/or alder saplings. Upon completion of each maintenance and monitoring event, the contractor shall prepare a technical memorandum describing the effort completed and the results of the inspection. Per Final Operation and Maintenance Plan for Phytoremediation and Tide Gate, Operable Unit 1, Naval Base Kitsap Keyport, Keyport, Washington. Prepared by Sealaska Environmental Services, LLC, Poulsbo, Washington for NAVFAC Northwest, Silverdale, Washington. (Lastest Edition)

UNIT PRICE ESTIMATED

QUANTITY

$ - 1

To plan, prepare for, attend, and provide draft/final minutes of a 8 hour technical meeting to be held between the contractor, the Navy, regulators, and stakeholders. The meeting shall be attended by the Contractor's project manager and two Contractor senior technical specialist or engineer. The preparation of the meeting shall include generation of meeting agenda, supporting documents and graphics, and coordination/strategy development with the PM necessary to accurately plan technical project meetings, as approved by the PM. The Contractor shall assume 12 hours for preparation and minutes by the project manager and 16 hours total for the two senior technical support for this task (in addition to the 8 hour meeting). Meeting minutes shall be taken by the Contractor, submitted in draft form to the Navy PM within 2 working days. Final minutes and action items shall be provided within 5 working days from the day of the PM's approval.

$ - 10

$ - 1 $ - 1

These all are fully inclusive ("turnkey") SLINs. These SLINs shall cover all work necessary to accomplish and report all work elements defined in the SLIN descriptions.

See Attachment M of the base contract for description of work.

$ - 1 $ - 1

$ - 1

$ - 1

$ - 1

See Attachment G of the base contract for description of work.

See Attachment H of the base contract for description of work.

See Attachment I of the base contract for description of work.

See Attachment E of the base contract for description of work.

To plan, prepare for, attend, and provide draft/final minutes of a 4 hour technical meeting to be held between the contractor, the Navy, regulators, and stakeholders. The meeting shall be attended by the Contractor's project manager and one Contractor senior technical specialist or engineer. The preparation of the meeting shall include generation of meeting agenda, supporting documents and graphics, and coordination/strategy development with the PM necessary to accurately plan technical project meetings, as approved by the PM. The Contractor shall assume 8 hours for preparation and minutes by both the project manager and senior technical support for this task (in addition to the 4 hour meeting). Meeting minutes shall be taken by the Contractor, submitted in draft form to the Navy PM within 2 working days. Final minutes and action items shall be provided within 5 working days from the day of the PM's approval.

See Attachment E of the base contract for description of work.

See Attachment F of the base contract for description of work.

A 240 AL Keyport Tide Gate O&M EA

A 240 AM Keyport Land Use Controls Inspection EA

A 240 AN Point McIntyre Weather Day EA

PRE-PRICED MAINTENANCE UNIT EXTENDED PRICE

A 250 AA Extraction Pump Repair EA $ - A 250 AB Carbon Change Out & Screen Cleaning EA $ -

A 250 AC Adak LUC/IC - DVD Maintenance EA $ - A 250 AD Influent/Effluent Pump Replacement EA $ -

FREE PRODUCT REMOVAL UNIT EXTENDED PRICE

A 260 AA FPR by Sock EA $ -

A 260 AB FPR by Hand Bail EA $ -

Using sock absorbent material to perform setup and retrieval of free product to include sample of free product, and transportation and disposal costs. $ - 5

Using hand bail/canisters to perform setup and retrieval of free product to include sample of free product, and transportation and disposal costs.

$ - 5

To perform setup and retrieval of free product to include sample of free product, transportation, and disposal costs. This series of 260 SLINs applies to the Puget Sound area. PRICE ESTIMATED QUANTITY

$ - 1

$ - 1 To ensure the Adak air terminal informational DVD player remains running and functional. This is to be done in conjunction with SLIN 240 AD per section 4.4 of the ICMP found in PWS Attachment H Reference 2 for a period of 1 year. $ - 1

$ - 1

To perform the services described below that exceed the O&M requirements identified in the Performance Work Statement PRICE ESTIMATED QUANTITY

Contractor shall monitor and maintain the Keyport Operable Unit 1 tide gate as stipulated in the most current version of the Keyport Operations and Maintenance Plan. Tide gate maintenance shall involve hand scraping and removal of barnacles, mussels, silt, seaweed, and branches/twigs on all accessible exterior surfaces, floats, side door interiors, surrounding structures, accessible interior portions of the culvert (within approximately 4 feet of the door), and on the upper culvert security gate. The tide gate shall also be inspected to ensure all parts are intact and in working order, including the vacuum break vent and floats. To ensure the tide gate is operating correctly, the contractor shall monitor tide gate function through one high tide cycle. Temporary staff gauges shall be installed on both sides of the tide gate culvert (tidal flat and marsh sides of the tide gate) and tide gate operation shall be monitored from approximately 2 hours before high tide to 2 hours after high tide (based on predictions of high tide in the adjacent Liberty Bay). Water levels and observations of tide gate position shall be measured and documented at 15 minute increments during the transition of the tide gate from an open position to a closed position. Upon completion of each tide gate maintenance and monitoring event, the contractor shall prepare a technical memorandum describing the effort completed and the results of the inspection. If during the tide gate inspection parts are found to be damaged which could affect tide gate operations, the contractor shall notify the NAVFAC Remedial Project Manager immediately. Per Final Operation and Maintenance Plan for Phytoremediation and Tide Gate, Operable Unit 1, Naval Base Kitsap Keyport, Keyport, Washington. Prepared by Sealaska Environmental Services, LLC, Poulsbo, Washington for NAVFAC Northwest, Silverdale, Washington. (Latest Edition)

Contractor shall perform a Land Use Control (LUC) inspection of the areas of NBK Keyport that are subject to LUCs in compliance with the most recent version of the Keyport Institutional Controls Plan, Operable Unit 1, Operable Unit 2, and Areas 22 and 7. Contractor shall conduct visual inspections of Operable Unit 1, Operable Unit 2, Areas 7 and Area 22, contact appropriate installation staff and evaluate LUC compliance to allow completion of the LUC inspection checklists included in the LUC Plan. Upon completion of the LUC checklists, the contractor shall prepare a technical memorandum describing the effort completed and the results of the inspection, with the completed checklists attached. If while conducting the LUC inspections LUCs are found to have been violated, the contractor shall notify the NAVFAC Remedial Project Manager immediately. Per Final Institutional Controls Plan, Operable Unit 1, Operable Unit 2, and Areas 22 and 7, Naval Base Kitsap Keyport, Keyport, Washington. Prepared by NAVFAC Northwest, Silverdale, Washington. (Latest Edition)

The contractor shall be prepared for inclement weather downtime or the presence of a polar bear, which may prevent the contractor personnel from mobilizing to the site. Based on the 2013, 2014, 2015, 2016, 2017, and 2018 field work at Point McIntyre, weather days are a reasonable expectation for the LTM/O field work as is the possible presence of a polar bear at the site. Weather days and would be awarded if the contractor requires more than 5 days for the field work (NOT including mobilization and demobilization). The contractor shall propose a daily rate (negotiable) for each day field work cannot be performed due to weather and/or a polar bear. During the execution of field activities, the Contractor shall notify the Government whenever a weather event has occurred that prevents on-site work and shall provide documentation (Daily Production Report or Daily Quality Control Report) in support of each requested weather day. The option will be awarded per weather day if necessary during the field work. This option expires at the end of the field work.

WELL INSTALLATION (HOLLOW STEM AUGER)-WASHINGTON STATE

(PUGET SOUND REGION) UNIT EXTENDED PRICE

A 270 AA 0-20 feet/5 feet/2"/5' LF $ - A 270 AB 0-20 feet/continuous/2"/5' LF $ - A 270 AC 0-20 feet/5 feet/2"/10' LF $ - A 270 AD 0-20 feet/continuous/2"/10' LF $ - A 270 AE 0-20 feet/5 feet/4"/5' LF $ - A 270 AF 0-20 feet/continuous/4"/5' LF $ - A 270 AG 0-20 feet/5 feet/4"/10' LF $ - A 270 AH 0-20 feet/continuous/4"/10' LF $ - A 270 AI >20-40 feet/5 feet/2"/5' LF $ - A 270 AJ >20-40 feet/continuous/2"/5' LF $ - A 270 AK >20-40 feet/5 feet/2"/10' LF $ - A 270 AL >20-40 feet/continuous/2"/10' LF $ - A 270 AM >20-40 feet/5 feet/4"/5' LF $ - A 270 AN >20-40 feet/continuous/4"/5' LF $ - A 270 AO >20-40 feet/5 feet/4"/10' LF $ - A 270 AP >20-40 feet/continuous/4"/10' LF $ - A 270 AQ >40-65 feet/5 feet/2"/5' LF $ - A 270 AR >40-65 feet/continuous/2"/5' LF $ - A 270 AS >40-65 feet/5 feet/2"/10' LF $ - A 270 AT >40-65 feet/continuous/2"/10' LF $ - A 270 AU >40-65 feet/5 feet/4"/5' LF $ - A 270 AV >40-65 feet/continuous/4"/5' LF $ - A 270 AW >40-65 feet/5 feet/4"/10' LF $ - A 270 AX >40-65 feet/continuous/4"/10' LF $ - A 270 AY Additional Soil Sample EA $ - A 270 AZ Shelby Tube Soil Sample EA $ -

WELL REDEVELOPMENT-WASHINGTON STATE (PUGET SOUND

REGION) UNIT EXTENDED PRICE

A 280 AA Redevelop Existing Wells 0'-10' LF $ - A 280 AB Redevelop Existing Wells 10'-25' LF $ - A 280 AC Redevelop Existing Wells 25'-50' LF $ - A 280 AD Redevelop Existing Wells 50'-75' LF $ - A 280 AE Redevelop Existing Wells 75'-100' LF $ - A 280 AF Redevelop Existing Wells 100'-200' LF $ - A 280 AG Redevelop Existing Wells 200'-250' LF $ -

(1 Sample = 1 Each) $ - 10

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

(1 Sample = 1 Each) $ - 10

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20 Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20 Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

To drill, document, sample, log, case, install, characterize, and develop a resource protection well per SOPs and the standards of WAC 173-

160. Work includes handling, management, and disposal of investigation derived wastes (in accordance with all applicable Federal, State, Local, and Navy regulations and guidance for the site). All well installation work with the exclusion of the well monument is included in this line item. Well screen shall be either 10 or 20 slot as determine necessary. A well driller licensed in the State of Washington and trained per 29 CFR 1910.120 shall complete the work required under this line item. Well Development methods using air or jetting of water into the well are discouraged because of the potential for affecting water quality but if is necessary shall be conducted under the supervision of a qualified hydrogeologist. Provide well with a lockable "J-Plug" and lock. Provide two keys to the lock to the Navy. This SLIN does not include surveying of new well.

PRICE ESTIMATED QUANTITY

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

To collect field measurements, document, log and redevelop a resource protection well per SOPs and the standards of WAC 173-160. Work includes handling, management, and disposal of investigation derived wastes (per all applicable Federal, State, Local, and Navy regulations and guidance for the site). Well redevelopment methods including surge block and bailer/pump should be used. Use of jetting or addition of descaling chemicals into the well are discouraged because of the potential for affecting water quality. However, if necessary shall be conducted at the direction of the RPM, under the supervision of a licensed hydrogeologist. Provide well with a new lockable "J-Plug" and lock. Provide two keys to the lock to the Navy.

PRICE ESTIMATED QUANTITY

WELL INSTALLATION (SONIC)-WASHINGTON STATE (PUGET SOUND

REGION) UNIT EXTENDED PRICE

A 290 AA 0-20 feet/5 feet/2"/5' LF $ - A 290 AB 0-20 feet/continuous/2"/5' LF $ - A 290 AC 0-20 feet/5 feet/2"/10' LF $ - A 290 AD 0-20 feet/continuous/2"/10' LF $ - A 290 AE 0-20 feet/5 feet/4"/5' LF $ - A 290 AF 0-20 feet/continuous/4"/5' LF $ - A 290 AG 0-20 feet/5 feet/4"/10' LF $ - A 290 AH 0-20 feet/continuous/4"/10' LF $ - A 290 AI >20-40 feet/5 feet/2"/5' LF $ - A 290 AJ >20-40 feet/continuous/2"/5' LF $ - A 290 AK >20-40 feet/5 feet/2"/10' LF $ - A 290 AL >20-40 feet/continuous/2"/10' LF $ - A 290 AM >20-40 feet/5 feet/4"/5' LF $ - A 290 AN >20-40 feet/continuous/4"/5' LF $ - A 290 AO >20-40 feet/5 feet/4"/10' LF $ - A 290 AP >20-40 feet/continuous/4"/10' LF $ - A 290 AQ >40-65 feet/5 feet/2"/5' LF $ - A 290 AR >40-65 feet/continuous/2"/5' LF $ - A 290 AS >40-65 feet/5 feet/2"/10' LF $ - A 290 AT >40-65 feet/continuous/2"/10' LF $ - A 290 AU >40-65 feet/5 feet/4"/5' LF $ - A 290 AV >40-65 feet/continuous/4"/5' LF $ - A 290 AW >40-65 feet/5 feet/4"/10' LF $ - A 290 AX >40-65 feet/continuous/4"/10' LF $ - A 290 AY Additional Soil Sample EA $ - A 290 AZ Shelby Tube Soil Sample EA $ -

WELL INSTALLATION BY HAND METHODS-ALASKA UNIT EXTENDED PRICE

A 300 AA 0-5 feet / 1 - 2 inch LS $ - A 300 AB > 5 feet to 10 feet / 1 - 2 inch LS $ - A 300 AD Additional Soil Sample EA $ -

$ - 5

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ -

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep

ESTIMATED QUANTITY

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

(1 Sample = 1 Each) $ - 10

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

(1 Sample = 1 Each) $ - 10

To drill, document/log, install and develop a resource protection well per SOPs and the standards of WAC 173-160. Work includes handling, management, and disposal of investigation derived wastes (in accordance with all applicable Federal, State, Local, and Navy regulations and guidance for the site). All well installation work with the exclusion of the well monument is included in this line item. Well screen shall be either 10 or 20 slot as approved by the Navy. A well driller licensed in the State of Washington and trained per 29 CFR 1910.120 shall complete the work required under this line item. Well development methods including surge block and bailer/pump should be used. Use of jetting is discouraged because of the potential for affecting water quality. However, if necessary shall be conducted at the direction of the RPM, under the supervision of a licensed hydrogeologist. Copies of all drillers logs signed by the driller shall be provided to the Navy. Provide well with a lockable "J-Plug" and lock. Provide two keys to the lock to the Navy. This SLIN does not include surveying of new well.

PRICE ESTIMATED QUANTITY

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ -

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ -

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ -

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

$ - 25

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

Price per linear foot for a well ranging in depth from 0 to 20 feet deep

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ -

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ -

$ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep

(1 Sample = 1 Each) $ - Use either hand auger, power auger or post-hole digger, to install temporary monitoring wells. Well screen shall be either 10 or 20 slot as approved by the Navy. Well development methods including surge block and bailer/pump should be used per the standards of ASTM D6724- 04(2010), ASTM D6724-04(2010), 18 AAC 75, 18 AAC 78 and Monitoring Well Guidance. Work includes handling, management, and disposal of investigation derived wastes (per all applicable Federal, State, Local, and Navy regulations and guidance for the site). All well installation work with the exclusion of the well monument is included in this line item. All personnel shall be trained per 29 CFR 1910.120 to complete the work required under this line item. Installation shall be performed by a professional with direct experience. Provide GPS location of well to Navy.

PRICE

WELL INSTALLATION (HOLLOW STEM AUGER)-ALASKA UNIT EXTENDED PRICE

A 310 AA 0-20 feet/5 feet/2"/5' LF $ - A 310 AB 0-20 feet/continuous/2"/5' LF $ - A 310 AC 0-20 feet/5 feet/2"/10' LF $ - A 310 AD 0-20 feet/continuous/2"/10' LF $ - A 310 AE 0-20 feet/5 feet/4"/5' LF $ - A 310 AF 0-20 feet/continuous/4"/5' LF $ - A 310 AG 0-20 feet/5 feet/4"/10' LF $ - A 310 AH 0-20 feet/continuous/4"/10' LF $ - A 310 AI >20-40 feet/5 feet/2"/5' LF $ - A 310 AJ >20-40 feet/continuous/2"/5' LF $ - A 310 AK >20-40 feet/5 feet/2"/10' LF $ - A 310 AL >20-40 feet/continuous/2"/10' LF $ - A 310 AM >20-40 feet/5 feet/4"/5' LF $ - A 310 AN >20-40 feet/continuous/4"/5' LF $ - A 310 AO >20-40 feet/5 feet/4"/10' LF $ - A 310 AP >20-40 feet/continuous/4"/10' LF $ - A 310 AQ >40-65 feet/5 feet/2"/5' LF $ - A 310 AR >40-65 feet/continuous/2"/5' LF $ - A 310 AS >40-65 feet/5 feet/2"/10' LF $ - A 310 AT >40-65 feet/continuous/2"/10' LF $ - A 310 AU >40-65 feet/5 feet/4"/5' LF $ - A 310 AV >40-65 feet/continuous/4"/5' LF $ - A 310 AW >40-65 feet/5 feet/4"/10' LF $ - A 310 AX >40-65 feet/continuous/4"/10' LF $ - A 310 AY Additional Soil Sample EA $ - A 310 AZ Shelby Tube Soil Sample EA $ -

WELL REDEVELOPMENT-ALASKA UNIT

EXTENDED PRICE

A 320 AA Redevelop Existing Wells 0'-10' LF $ - A 320 AB Redevelop Existing Wells 10'-25' LF $ - A 320 AC Redevelop Existing Wells 25'-50' LF $ - A 320 AD Redevelop Existing Wells 50'-75' LF $ -

MOB/DEMOB MISCELLANEOUS WELL UNIT

EXTENDED PRICE

A 330 AA

Mobilization/Demobilization - Puget Sound Region, Washington excluding Whidbey Island

EA $ -

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ -

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

All Mobilization/Demobilization efforts, coordination, facility access and use, any excavation permitting, any special inspections, transportation to and from site field event, all other mobilization required for execution to support "Well Installation," "Install Well Monument" (if separate), and "Decommission Well Boring" SLINs to support Navy sites in the Puget Sound Region, Washington State.

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ -

To support "Well Installation," "Install Well Monument" (if separate), and "Decommission Well Boring" SLINs for mobilization/demobilization efforts PRICE

ESTIMATED

QUANTITY

(1 Sample = 1 Each) $ - 10 (1 Sample = 1 Each) $ - 10 To collect field measurements, document, log and redevelop a resource protection well per SOPs and the State of Alaska standards. Work includes handling, management, and disposal of investigation derived wastes (per all applicable Federal, State, Local, and Navy regulations and guidance for the site). Well redevelopment methods including surge block and bailer/pump should be used. Use of jetting or addition of descaling chemicals into the well are discouraged because of the potential for affecting water quality. However, if necessary shall be conducted at the direction of the RPM, under the supervision of a licensed hydrogeologist. All personnel shall be trained per 29 CFR 1910.120 to complete the work required under this line item. Provide well with a new lockable "J-Plug."

PRICE ESTIMATED QUANTITY

Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25 Price per linear foot for a well ranging in depth from greater than 40 feet to 65 feet deep $ - 25

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20 Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20 Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20 Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ -

$ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20 Price per linear foot for a well ranging in depth from greater than 20 feet to 40 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep

To drill, document/log, install and develop a resource protection well per the standards of 18 AAC 75, 18 AAC 78 and Monitoring Well Guidance.

Work includes handling, management, and disposal of investigation derived wastes (in accordance with all applicable Federal, State, Local, and Navy regulations and guidance for the site). All well installation work with the exclusion of the well monument is included in this line item. Well screen shall be either 10 or 20 slot as determine necessary. A well driller licensed in the State of Alaska and trained per 29 CFR 1910.120 shall complete the work required under this line item. Well development methods including surge block and bailer/pump should be used. Use of jetting is discouraged because of the potential for affecting water quality. However, if necessary shall be conducted at the direction of the RPM, under the supervision of a licensed hydrogeologist. Copies of all drillers logs signed by the driller shall be provided to the Navy. Provide well with a lockable "J-Plug." This SLIN does not include surveying of new well.

PRICE ESTIMATED QUANTITY

Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20 Price per linear foot for a well ranging in depth from 0 to 20 feet deep $ - 20

A 330 AB Mobilization/Demobilization - Adak, Alaska EA $ -

A 330 AC

Mobilization/Demobilization - Whidbey Island, Washington

EA $ -

INSTALL/REPLACE WELL MONUMENT UNIT EXTENDED PRICE

A 340 AA Install Above Ground /8" Well Monument EA

A 340 AB Install Flush Mount/8" Well Monument EA

A 340 AC Install Flush Mount/12" Well Monument EA

A 340 AD Install Bollard /3' (set of 3) SE

A 340 AE Replace Flush Mount/8" Well Monument EA

A 340 AF Replace Flush Mount/12" Well Monument EA

DECOMMISSION WELL BORING PRIOR - WASHINGTON STATE

(PUGET SOUND REGION)

UNIT EXTENDED PRICE

A 350 AA 0-20 feet Decommission Well Boring LF $ - A 350 AB 0-40 feet Decommission Well Boring LF $ - A 350 AC 0-60 feet Decommission Well Boring LF $ - A 350 AD 0-100 feet Decommission Well Boring LF $ - A 350 AE >100 feet Decommission Well Boring LF $ -

DECOMMISSION WELL BORING OVERDRILLING - WASHINGTON

STATE (PUGET SOUND REGION) UNIT EXTENDED PRICE

A 360 AA 0-20 feet Decommission Well Boring Overdrilling LF $ - A 360 AB 0-40 feet Decommission Well Boring Overdrilling LF $ - A 360 AC 0-60 feet Decommission Well Boring Overdrilling LF $ - A 360 AD 0-100 feet Decommission Well Boring Overdrilling LF $ - A 360 AE >100 feet Decommission Well Boring Overdrilling LF $ -

DECOMMISSION WELL BORING -ALASKA UNIT EXTENDED PRICE

Well diameters range from 2 to 4 inches $ - 100 Well diameters range from 2 to 4 inches $ - 100

Well diameters range from 2 to 4 inches $ - 40 Well diameters range from 2 to 4 inches $ - 60

All Mobilization/Demobilization efforts, coordination, facility access and use, any excavation permitting, any special inspections, transportation to and from site field event, all other mobilization required for execution to support "Well Installation," "Install Well Monument" (if separate), and "Decommission Well Boring" SLINs to support sites in Adak, Alaska.

$ - 1

ESTIMATED QUANTITY

Well diameters range from 2 to 4 inches $ - 20

Provide three, three foot minimum protective steel casings filled with concrete set in a triangle centered on the well. Casings shall be located two to three feet from the monitoring well. Casings shall be painted yellow. $ -

To document, log, and decommission a resource protection well and monument per the standards of WAC 173-160. Work includes handling, management, and disposal of investigation derived wastes, including monument (in accordance with all applicable Federal, State, Local, and Navy regulations and guidance for the site). All well Decommissionment work is included in this line item. A well driller licensed in the State of Washington and trained per 29 CFR 1910.120 shall complete the work required under this line item.

PRICE

$ - 1

$ - 1

Remove existing 8-inch well monument and install a new 8 inch water-tight, bolted well monument with 12 inch skirt. Concrete apron shall extend a minimum of 12 inches from well monument and shall be brush finished and sloped a minimum of 1/8 inch downward away from well.

Remove existing 12-inch well monument and install a new 12 inch water-tight, bolted well monument with 12 inch skirt. Concrete apron shall extend a minimum of 18 inches from well monument and shall be brush finished and sloped a minimum of 1/4 inch downward away from well.

Provide 8 inch water-tight, bolted well monument with 12 inch skirt. Concrete apron shall extend a minimum of 12 inches from well monument and shall be brush finished and sloped a minimum of 1/8 inch downward away from well. $ - 5 Provide 12 inch water-tight, bolted well monument with 12 inch skirt. Concrete apron shall extend a minimum of 18 inches from well monument and shall be brush finished and sloped a minimum of 1/4 inch downward away from well. $ -

ESTIMATED QUANTITY

Includes lockable steel monument casing painted yellow that extends 3 feet above existing grade and a minimum of 2 feet below existing grade.

Monument casing shall be numbered with well number painted on exterior and state identification number shall be painted or scribed on inside of lid. Monument casing shall be filled to within 4 inches of the top of the well casing. Well casing shall be placed within 2 inches of top of monument casing. Provide a weather rated lock and 2 keys to the Navy.

$ - 5

All Mobilization/Demobilization efforts, coordination, facility access and use, any excavation permitting, any special inspections, transportation to and from site field event, all other mobilization required for execution to support "Well Installation," "Install Well Monument" (if separate), and "Decommission Well Boring" SLINs to support Navy sites on Whidbey Island, Washington.

$ - 1 All labor, materials, supplies, and equipment necessary to document, log, label, and install a resource protection well monument per the standards of the appropriate state, facility, and compatible with site conditions. Work includes handling, management, and disposal (in accordance with all applicable Federal, State, Local, and Navy regulations and guidance for the site) of investigation derived wastes. All well monument installation or replacement work is included in this line item. A well driller licensed in the State of the well and trained per 29 CFR

1910.120 shall complete the work required under this line item.

PRICE

To document, log, and decommission a resource protection well per the standards of 18 AAC 75, 18 AAC 78 and Monitoring Well Guidance.

Work includes handling, management, and disposal of investigation derived wastes, including well monument (in accordance with all applicable Federal, State, Local, and Navy regulations and guidance for the site). All well Decommissionment work is included in this line item. A well driller licensed in the State of Alaska and trained per 29 CFR 1910.120 shall complete the work required under this line item.

ESTIMATED QUANTITY PRICE

Well diameters range from 2 to 4 inches $ - 20

Well diameters range from 2 to 4 inches $ - 100

ESTIMATED QUANTITY

Well diameters range from 2 to 4 inches $ -

When original drillers logs are not available, to document, log, and decpommission a resource protection well per the standards of WAC 173-

160. Work includes handling, management, and disposal of investigation derived wastes, including well monument (in accordance with all applicable Federal, State, Local, and Navy regulations and guidance for the site). All well Decommissionment work is included in this line item.

A well driller licensed in the State of Washington and trained per 29 CFR 1910.120 shall complete the work required under this line item. PRICE

Well diameters range from 2 to 4 inches $ - 60

Well diameters range from 2 to 4 inches 100

A 370 AA 0-20 feet Decommission Well Boring LF $ - A 370 AB 0-40 feet Decommission Well Boring LF $ - A 370 AC 0-60 feet Decommission Well Boring LF $ - A 370 AD 0-100 feet Decommission Well Boring LF $ -

STORAGE AREAS UNIT EXTENDED PRICE

A 380 AA Adak, AK EA $ -

ADAK ALASKA SUPPORT UNIT EXTENDED PRICE

A 390 AA Temporary Office Space EA $ -

NON PRE-PRICED WORK UNIT EXTENDED PRICE

A 400 AA Non Pre-Priced Work EA $ 1,750,000.00 $ 1,750,000.00

SLIN TITLE UNIT

ESTIMATED

QUANTITY

EXTENDED PRICE

BASIC SLIN NOTE

A 100 AA Water Level Measurement EA 100 $ - A 100 AB Water Level Free Product Measurement EA 300 $ -

SAMPLE EXISTING MONITORING WELL OF VARIOUS TYPES,

DIAMETERS, AND DEPTHS USING LOW FLOW SAMPLING

TECHNIQUES. UNIT

ESTIMATED

QUANTITY EXTENDED PRICE

A 110 AA Sample Existing Wells 0'-25' EA 31 $ - A 110 AB Sample Existing Wells 25'-50' EA 40 $ - A 110 AC Sample Existing Wells 50'-100' EA 13 $ - A 110 AD Sample Existing Wells 100'-200' EA 44 $ - A 110 AE Sample Existing Wells 100-200' w Pump EA 22 $ - A 110 AF Clean Hands/Dirty Hands EA 5 $ -

SAMPLING PERFORMED IN MISCELLANEOUS MATRICES

A 120 AA Surface Water / Seep Sample EA 10 $ - A 120 AB Surface Sample EA 25 $ -

Well diameters range from 2 to 4 inches $ - 40

Provide temporary private office space in the City of Adak for use by the US Navy, with phone and router. Shall include two desks, power, water, heat, local phone service, internet of speeds 512 / 256 kbps (up/down) or better and bandwidth usage of 3000MB/month or better. Office shall have living space with kitchen, at least two bedrooms, two full baths, covered garage, and laundry facilities for a period of 1 month.

$ - 0 Any work not pre-priced in any other sub-line item number (SLIN). PRICE ESTIMATED

UNIT PRICE ESTIMATED

All rental, maintenance, security, insurance, two sets of keys, management costs associated with providing accessible, secure, covered, dry, locked storage units. Keys shall be labled and provided to GDA. Period of Performance is 1 year. PRICE ESTIMATED QUANTITY

Approximate size 630 sq feet floor space on Adak Island near City of Adak for a period of 1 year. $ - 1

Well diameters range from 2 to 4 inches $ - 100

Well diameters range from 2 to 4 inches $ - 20

SLIN DESCRIPTIONS

Below are fully burdened Rates. Unless specifically addressed as being not included within the SLIN structure, the Contractor is responsible to provide all fully burneded labor, equipment (including all associated operation & maintenance requirements), tools, material, supplies, vehicles, site management/coordination, schedule management, shipping, decontamination, management of IDW, sample preparation, site cleanup, data compilation and electronic submittals, field documentation and record keeping, work coordination, project team reporting/communication, sample collection shall include laboratory and field QA/QC samples (MS, MSD, LCS, blanks, etc in batches as appropriate), project management and all associated overheads and profit to execute work identified below.