YFNX-20 ERRATA Two.pdf

THIS PERMANENT CHANGE UPDATES THE SPECIFICATION BID PACKAGE.

SHIP: YFNX-20 (RMC 22747)

SERM-024-24

ERRATA NUMBER:

SPECIFICATION NUMBER:

THE FOLLOWING ITEMS ARE REPLACED:

635-11-001

DATED: 9/21/2023 12:27:12PMPage 1 of 1

SHIP: YFNX-20 (RMC 22747) ITEM NO: 635-11-001 (E2)

COAR: 28 PCN: SERM-L008

SWT FILE NO: 635-083 CMP: NONE

REVISED: 02 OCT 2022 PLANNER: KRIMMER, DAVID

BRIDGER, WRAY

CORNWELL, RICHARD

SSP: SERM-024-24 1 of 2 ITEM NO: 635-11-001

ERRATA NO. 2

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.

1. SCOPE:

1.1 Title: Insulation and Ceiling Tile Replacement; accomplish

1.2 Location of Work:

1.2.1 Second Deck (01 Level)

1.2.2 Main Deck

1.3 Identification:

1.3.1 Quantity (1,900 SF), Ceiling Tile System, For the Location Listed in 1.2.1

1.3.2 Quantity (2,000 SF), Ceiling Tile System, For the Location Listed in 1.2.2

1.3.3 Quantity (1,825 SF), Thermal Overhead Insulation, MIL-I-742, For the Location Listed in 1.2.1

(E2)

1.3.4 Quantity (2,000 SF), Thermal Overhead Insulation, MIL-I-742, For the Location Listed in 1.2.2

(E2)

2. REFERENCES:

2.1 Standard Items

2.2 4-P-8826, Comet III 25'-7"x80'-10 1/8"x25'-0 3/4" 2 Story Building for YFNX-20 Barge at CSNY, 5C (Sheet 2)

2.3 551-5911033 Rev A, Moored Training Ship YFNX 20 Deckhouse Modifications

2.4 302-7029582 Rev B, YFNX-20 Power Distribution and Lighting

3. REQUIREMENTS:

3.1 Remove and dispose of existing ceiling tile system, insulation and lagging from each overhead of each location listed in 1.2, as designated by the SUPERVISOR.

3.2 Accomplish the requirements of 009-11 of 2.1 for installation of new insulation and lagging in the overhead of each location listed in 1.2, in accordance with 2.2.

3.2.1 Accomplish the requirements of 009-12 of 2.1 for each new stud to support insulation and lagging.

3.2.2 Accomplish the requirements of 009-32 of 2.1 for each surface to be insulated with the exception of non-ferrous and corrosion resistant steel (CRES) piping, plating, and vent ducting.

3.2.3 Accomplish the requirements of 009-32 of 2.1 for new

insulation, lagging, and each reusable cover to match each surrounding area.

SHIP: YFNX-20 (RMC 22747)

SSP: SERM-024-24 2 of 2 ITEM NO: 635-11-001

ERRATA NO. 2

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.

3.3 Install new each ceiling tile system listed in 1.3 and located in 1.2, using 2.2 through 2.4 for guidance.

3.3.1 Relocate each light, fixture, equipment, pipe, cable, and wire in way of new installation. New installation must be template to suit each existing shipboard condition and offset around each interference not feasible to relocate.

3.3.2 Accomplish the requirements of 009-12 of 2.1, including Table 2,3, Columns A, C, and D, Lines One through 7.

(E2)

(V)(G) "OPERATIONAL TEST"

3.4 Accomplish an operational test of each equipment relocated, using

2.2 through 2.4 for guidance. Verify proper operation.

3.5 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.

4. NOTES:

4.1 None.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

1. None.