J.32 Phase I Relevant Corporate Experience Form.pdf

Attachment J.32

Relevant Corporate Experience

Attachment J.32– Relevant Corporate Experience:

Offeror must submit this form, Relevant Corporate Experience, addressing the following and per the below instructions:

• Offerors may reference the same contract (A, B, C) for multiple citations in question 8.

• This J.32 Submission must be an independent PDF with no other attachments.

• Estimated Value on this form refers to the example contracts submitted for

Relevant Corporate Experience and should make no reference to cost associated with this SIR proposal.

• If work was performed on a specific Task Order, site both the Task Order number and the Base/Parent Contract number should be referenced.

Factor 1 – Scope:

The Offeror must demonstrate scope for Relevant Corporate Experience, provide no more than three (3) completed contracts/projects, within five (5) years of the issuance of this SIR. The Offeror must provide three (3) different types of design and/or installation projects from the following six (6) classifications; of which a minimum of one (1) submissions must be for an installation project.

Yes No Project Classification

☐ ☐ 1. Engine Generator (EG), 20 kW or larger.

☐ ☐ 2. Uninterruptible Power Supplies (UPS), facility size 40 kVA or larger.

☐ ☐ 3. Fuel Storage Tank (FST) Systems, 250 gallon tank or larger with environmental monitoring.

☐ ☐ 4. Underground cabling (direct buried) for Electrical Line

Distribution (ELD) of a minimum of 1,000 feet, to include splicing and terminations OR

Direct burial of low voltage conduit systems, installation of handholes with 500 feet of low voltage circuits to include termination.

☐ ☐ 5. Alternative Energy Systems (AES) such as photovoltaic/solar, wind power, fuel cells and other emerging alternative energy technologies. AES system, 1kW or larger.

☐ ☐ 6. Lightning Protection, Grounding, Bonding and Shielding

(LPGBS). There are five main components of LPGBS work:

(1) exterior lightning protection systems, (2) earth electrode system (EES), (3) sensitive electronic equipment grounding systems, (4) surge protection, and (5) fences and gates grounding. LPGBS Project submission must include three (3) of the five (5) main components.

If you have selected yes for any of the above project classifications, you will be required to fill out the project classification form relevant to that project and provide additional project information and details. Project classification forms provided in this document proceeding the vendor information section.

Factor 2 – Geographic Support Experience:

The Offeror must demonstrate their Geographic Support Experience by completing SIR attachment J.32 - Factor 2. The Offeror must indicate with an “X” or check mark the region(s) or location(s) listed below where the Offeror’s has experience in providing services similar to the requirements described in the SOW.

The Offeror must demonstrate experience supporting at least three (3) Continental United

States (CONUS) regions and at least one (1) Outside Continental United States (OCONUS) region or location. (https://www.faa.gov/airports/regions).

CONUS:

☐ Central Region (IA, KS, MO, NE)

☐ Eastern Region (DC, DE, MD, NJ, NY, PA, VA, WV)

☐ Great Lakes Region (IL, IN, MI, MN, ND, OH, SD, WI)

☐ New England Region (CT, MA, ME, NH, RI, VT)

☐ Northwest Mountain Region (CO, ID, MT, OR, UT, WA, WY)

☐ Southern Region (AL, FL, GA, KY, MS, NC, SC, TN)

☐ Southwest Region (AR, LA, NM, OK, TX)

☐ Western-Pacific Region (AZ, CA, NV)

OCONUS:

☐ Alaskan Region

☐ Hawaii

☐ Saipan

☐ Guam

☐ Caribbean Islands

☐ Puerto Rico

☐ American Samoa

☐ Marshall Islands

This form can be completed on government and/or commercial sector installations.

Scope may be represented on one contract/project or be represented on separate contract(s)/ project(s) providing same or similar services; within five (5) years of the issuance of the SIR. Offeror must not use more space than provided and must not modify the form in anyway.

Block 2 must be completed with only one email address and be for the individual authorized to communicate on behalf of the Offeror.

https://www.faa.gov/airports/regions https://www.faa.gov/airports/central/ https://www.faa.gov/airports/eastern/ https://www.faa.gov/airports/great_lakes/ https://www.faa.gov/airports/new_england/ https://www.faa.gov/airports/northwest_mountain/ https://www.faa.gov/airports/southern/ https://www.faa.gov/airports/southwest/ https://www.faa.gov/airports/western_pacific/

Vendor Information:

1. Offeror/Vendor Name:

2. Offeror/Vendor Email Address:

3. Contract Number(s):

A

B

C

4. Issuing Office:

5. Total Estimated Value of the

Contract/Projects (s):

6. Period of Performance(s): A

7. Place(s) of Performance: A

8. Factor 1: Scope - The information provided in this Block must reference the information submitted in Blocks 3 through 7. Provide no more than three (3) completed contracts/projects, within five (5) years of the issuance of this SIR. The Offeror must provide three (3) different types of design and/or installation projects from the following six (6) classifications; of which a minimum of one (1) submissions must be for an installation project.

Project Classification No. 1

EG, 20 kW or larger? YES ☐ or NO ☐

Project Title

Select the letter(s) for the contract number from Block 3 for this project.

A ☐ B ☐ C ☐

Please indicate if this project is Design and/or Install ☐ Design and/or ☐ Install

START DATE COMPLETION DATE FACILITY TYPE

If yes, provide details of the effort below:

Project Classification No. 2

UPS, facility size 40 kVA or larger; YES ☐ or NO ☐

Project Title

Select the letter(s) for the contract number from Block 3 for this project.

A ☐ B ☐ C ☐

Please indicate if this project is Design and/or Install

Project Classification No. 3

FST Systems, 250 gallon tank or larger with environmental monitoring.

YES ☐ or NO ☐

Project Title

Select the letter(s) for the contract number from Block 3 for this project.

A ☐ B ☐ C ☐

Please indicate if this project is Design and/or Install

Project Classification No. 4

Underground cabling (direct buried) for

ELD of a minimum of 1,000 feet, to include splicing and terminations OR

Direct burial of low voltage conduit systems, installation of handholes with 500 feet of low voltage circuits to include termination;

YES ☐ or NO ☐

Project Title

Select the letter(s) for the contract number from Block 3 for this project.

A ☐ B ☐ C ☐

Please indicate if this project is Design and/or Install

Project Classification No. 5

AES such as photovoltaic/solar, wind power, fuel cells and other emerging alternative energy technologies.

AES system typically range from 1KW to

50KW

YES ☐ or NO ☐

Project Title

Select the letter(s) for the contract number from Block 3 for this project.

A ☐ B ☐ C ☐

Please indicate if this project is Design and/or Install

Project Classification No. 6

LPGBS -There are five main components of

LPGBS work: (1) exterior lightning protection , (2) earth electrode system

(EES), (3) sensitive electronic equipment grounding systems, (4) surge protection, and

(5) fences and gates grounding. LPGBS

Project submission must include three (3) of the five (5) main components.

YES ☐ or NO ☐

Project Title

Select the letter(s) for the contract number from Block 3 for this project.

A ☐ B ☐ C ☐

Please indicate if this project is Design and/or Install