J.23 FST Guidlines.pdf

Statutes:

The Oil Pollution Act of 1990 (OPA); 33 U.S.C. 2702 to 2761.

The Clean Water Act (CWA); 33 U.S.C. §1251 et seq. (1977) The Resource Conservation and Recovery Act (RCRA); 42 U.S.C§321 et seq. (1976) National Environmental Policy Act of 1969 (NEPA); 42 U.S.C. 4321-4347 Energy Policy Act of 2005; (Pub.L. 109-58)

FAA Orders

1050.15 – Fuel Storage Tanks at FAA Facilities

1050.16 – Fuel Storage Tanks Implementation Guidelines

1050.17 – Environmental Compliance at Air Traffic Organization Facilities

3900.19 – Occupational Safety and Health Program3900.57 - Environmental and

Occupational Safety and Health (EOSH) Requirements in the Planning and Execution of Construction and Maintenance Activities at National Airspace System (NAS) Facilities

3900.63 – ATO Fall Protection Program

6000.30 – National Airspace System Maintenance Policy

6000.50 – National Airspace System (NAS) Integrated Risk Management

6000.53 - Remote Maintenance Monitoring Interface Development and Implementation

6950.2 - Electrical Power Policy Implementation at National Airspace System Facilities

6980.11 – Maintenance of Engine Generators

6980.34 – Maintenance of Fuel Storage Tanks

6980.5 – Maintenance of Air Route Traffic Control Centers (ARTCC)

Code of Federal Regulations 40 CFR Part 110, Discharge of Oil 40 CFR Part 112, Oil Pollution Prevention 40 CFR Part 280, Technical Standards and Corrective Action Requirements for Owners and Operators of UST 33 CFR Part 154, Facilities Transferring Oil or Hazardous Material in Bulk 29 CFR Part 1910, Occupational Safety and Health Standards 29 CFR Part 1926, Safety and Health Regulations for Construction

Consensus Standards – National Fire Protection Association (NFPA NFPA 1 – Fire Code NFPA 30 – Flammable and Combustible Liquids Code NFPA 30a – Code for Motor Fuel Dispensing Facilities and Repair Garages NFPA 31 – Standard for Installation of Oil Burning Equipment NFPA 37 – Installation/Use of Stationary Combustion Engines NFPA 58 – Liquefied Petroleum Gas Code NFPA 77 – Static Electricity NFPA 85 – Boiler and Combustion Systems Hazards Code NFPA 326 – Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair NFPA 329 – Underground Leakage of Flammable and Combustible Liquids NFPA 5000 – Building Construction and Safety Code

Consensus Standards – American Petroleum Institute (API) RP 545 - Recommended Practice for Lightning Protection of Aboveground Storage Tanks for Flammable or Combustible Liquids RP 574 – Inspection Practices for Piping System Components

RP 575 – Inspection of Atmospheric and Low Pressure Storage Tanks RP 1604 - Closure of Underground Petroleum Storage Tanks RP 1615 - Installation of Underground Petroleum Storage Tanks RP 1621 - Bulk Liquid Stock Control at Retail Outlets RP 1632 - Cathodic protection of underground petroleum storage tanks and piping systems RP 1632 - Cathodic Protection of Underground Petroleum Storage Tanks and Piping

Systems RP 2003 – Protection against Ignitions Arising out of Static, Lightning and Stray Currents RP 2350 – Overfill Protection for Storage Tanks in Petroleum Facilities Std 510 – Pressure Vessel Inspection Code (Maintenance Inspection Rating Repair and

Alteration) Std 650 – Welded Tanks for Oil Storage Std 653 - Tank Inspection, Repair, Alteration, and Reconstruction Std 1631 - Interior Lining and Periodic Inspection of Underground Storage Tanks Std 2000 - Venting Atmospheric and Low-Pressure Storage Tanks Std 2015 - Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks Publication 327 - Aboveground Storage Tank Standards: A Tutorial Publication 334 - A Guide to Leak Detection for Aboveground Storage Tanks Publication 910 - Digest of State Boiler, Pressure Vessel, Piping and Aboveground Storage

Tank Rules and Regulations Publication 1571 - Diesel Fuel-Questions and Answers for Highway and Off-Highway

Use Publication 1628 - A Guide to the Assessment and Remediation of Underground

Petroleum Releases Publication A1632S - Cathodic Protection of Underground Petroleum Storage Tanks and

Piping Systems Spec 12P – Specifications for Fiberglass Reinforced Plastic Tanks

Consensus Standards – Steel Tank Institute (STI) STI P3 - Specification and Manual for External Corrosion Protection of Underground Steel Storage Tanks STI F894 - Act-100® Specification For External Corrosion Protection of FRP Composite

Steel USTs STI F921 - F921 Standard for Aboveground Tanks with Integral Secondary Containment STI F941 - Standards for Fireguard® Thermally Insulated Aboveground Storage Tanks STI F961 - ACT-100U Specification for External Corrosion Protection of Composite

Steel Underground Storage Tanks STI SP001 -Standard for Inspection of In-Service Shop Fabricated Aboveground Tanks for Storage of Combustible and Flammable Liquids STI SP031 - Standard for Repair of In-Service Shop Fabricated Aboveground Tanks for

Storage of Combustible & Flammable Liquids STI R821 sti-P3 Installation Instructions STI R891 - RP for Hold Down Strap Isolation STI R892 - RP for Corrosion Protection of Underground Piping Networks Associated with Liquid Storage and Dispensing Systems STI R912 - Installation Instructions for Shop Fabricated Aboveground Storage Tanks for

Flammable, Combustible Liquids STI R913 - Act-100Installation Instructions STI R942 - Fireguard Installation & Testing Instructions for Thermally Insulated, Lightweight, Double Wall Fireguard Aboveground Storage Tanks STI R971 - ACT-100-U® Installation Instructions

STI R972 - RP for the Addition of Supplemental Anodes to sti-P3® USTs

Consensus Standards – Petroleum Equipment Institute (PEI)

RP 100 – Installation of Underground Liquid Storage Systems RP 200 – Installation of Aboveground Storage Systems RP 600 - Overfill Prevention for ASTs RP 900 - UST Inspection and Maintenance

Consensus Standards – Underwriter Laboratories (UL)

Standard 142 - Standard for Safety for the Aboveground Storage of Flammable and Combustible. Liquids

Standard 1316 - Standard for Safety Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products

Standard 1746 - Standard for Safety: External Corrosion Protection Systems for Steel Underground Storage Tanks

Standard 2085 - Standard for Safety Protected Aboveground Tanks for Flammable and Combustible Liquids

U.S. Gas & Oil Certification Documents (UL) UL 2 - LP-Gas Hose UL 25 - Meters for Flammable and Combustible Liquids and LP-Gas UL 30 - Metal Safety Cans UL 32 - Metal Waste Cans UL 51 - Power-Operated Pumps for Anhydrous Ammonia and LP-Gas UL 58 - Steel Underground Tanks for Flammable and Combustible Liquids UL 79 - Power-Operated Pumps for Petroleum Dispensing Products UL 80 - Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids UL 87 - Power-Operated Dispensing Devices for Petroleum Products UL 109 - Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and

Marine Use UL 125 - Flow Control Valves for Anhydrous Ammonia and LP - Gas UL 132 - Safety Relief Valves for Anhydrous Ammonia and LP-Gas UL 142 - Steel Aboveground Tanks for Flammable and Combustible Liquids UL 144 - LP-Gas Regulators UL 180 - Liquid-Level Indicating Gauges for Oil Burner Fuels UL 252 - Compressed Gas Regulators UL 252A - Compressed Gas Regulator Accessories UL 330 - Hose and Hose Assemblies for Dispensing Flammable Liquids UL 331 - Strainers for Flammable Fluids and Anhydrous Ammonia UL 404 - Gauges, Indicating Pressure, for Compressed Gas Service UL 407 - Manifold for Compressed Gases UL 429 - Electrically Operated Valves UL 443 - Steel Auxiliary Tanks for Oil-Burner Fuel UL 495 - Power-Operated Dispensing Devices for LP-Gas UL 525 - Flame Arrestors UL 536 - Flexible Metal Hose UL 565 - Liquid-Level Gauges and Indicators for Anhydrous Ammonia and LP Gas UL 567 - Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas UL 569 - Pigtails and Flexible Hose Connectors for LP-Gas UL 644 - Container Assemblies for LP-Gas

UL 842 - Valves for Flammable Fluids UL 971 - Nonmetallic Underground Piping for Flammable Liquids UL 1238 - Control Equipment for Use with Flammable Liquid Dispensing Devices UL 1275 - Flammable Liquid Storage Cabinets UL 1313 - Nonmetallic Safety Cans for Petroleum Products UL 1314 - Special-Purpose Metal Containers UL 1316 - Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum

Products, Alcohols, and Alcohol-Gasoline Mixtures UL 1746 - External Corrosion Protection Systems for Steel Underground Storage Tanks UL 1769 - Cylinder Valves UL 2039 - Connector Piping for Flammable Liquids UL 2061 - Adapters and Cylinder Connection Devices for Portable LP-Gas Cylinder

Assemblies UL 2080 - Fire Resistant Tanks for Flammable and Combustible Liquids UL 2085 - Protected Aboveground Tanks for Flammable and Combustible Liquids UL 2227 - Overfilling Prevention Devices UL 2245 - Below-Grade Vaults for Flammable Liquid Storage Tanks UL 2258 - Nonmetallic Tanks Oil-Burner Fuels and Other Combustible Liquids UL 2586 - Hose Nozzle Valves UL 87A - Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Concentrations up to 85 Percent (E0 - E85).

UL 87B - Power-Operated Dispensing Devices for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations Up to 20 Percent (B20), Kerosene, and Fuel Oil

UL 119 - Adapters, Fittings, and Couplings for Anhydrous Ammonia and Fuel Gases UL 124 - Hand-Operated Pumps for Flammable and Combustible Liquids UL 212 - Hand-Operated Chemical Pumps UL 971A - Metallic Underground Fuel Pipe UL 1349 - LP-Gas Vaporizers UL 1351 - Hose Reels UL 1357 - Oxygen-Fuel Gas Combination Flash Arrester and Backpressure Check Valves UL 1358 - Compressed Gas Check Valves and Hose Couplers UL 1477 - Compressed Gas Shutoff Valves UL 1861 - Power-Operated Chemical Pumps UL 2003 - LP-Gas Cylinder Assemblies

Executive Orders E.O. 12088 – Federal Compliance with Pollution Control Standards