Atch__31_-_Addendum__1_Mech-Elec.pdf
PDF 169 KB Posted
- Attached to
- Mechanical Electrical IDIQ Federal contract opportunity
- Solicitation number
- FA8501-18-R-0003
About this file
This addendum pertains to a mechanical-electrical indefinite-delivery indefinite-quantity construction contract for Robins Air Force Base in Georgia. The addendum provides seven clarifications and additions to the statement of work, including designating an alternate as part of the project rather than optional, requiring asbestos and lead-based paint surveys of the construction area with ten sample locations each, specifying humidity control requirements for one rooftop unit, addressing positive building pressurization issues through minor design and construction work, and incorporating a provided concrete specification. Bidders should account for the costs of the asbestos and lead-based paint surveys and reports in their pricing. Any required abatement work would be handled through a subsequent contract modification after award.
Atch #31 - Addendum #1 to Mech-Elec
View the file
Other files for this federal contract opportunity
Show all 49
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1 of 2 UHHZ 170241
Addendum No. 1
FOR
UHHZ 170241
MECHANICAL ELECTRICAL (MECH/ELEC) IDIQ CONTRACT
ROBINS AIR FORCE BASE, GEORGIA
12 March 2018
PLEASE INCLUDE THE FOLLOWING IN THE STATEMENT OF WORK:
1. The design shown on Alternate No. 1 is now considered part of this project and is no longer an alternate.
2. The existence of ACM in the construction area has not been independently verified. The Contractor shall disregard in Section 1.01, Part K “Asbestos Abatement” and instead perform ACM survey of the construction area. The Contractor shall assume ten (10) sample locations for the purpose of bidding. The Contractor shall include in their price the cost of ACM survey and report to identify the existence and extent of ACM materials. The abatement portion of the work, if required, shall be handled with a subsequent contract modification after award.
3. The existence of LBP in the construction area has not been independently verified. The Contractor shall disregard in Section 1.01, Part L pertaining to LBP protection and instead perform LBP survey of the construction area. The Contractor shall assume ten (10) sample locations for the purpose of bidding. The Contractor shall include in their price the cost of LBP survey and report to identify the existence and extent of LBP materials. The abatement portion of the work, if required, shall be handled with a subsequent contract modification after award.
4. The HVAC controls sequence shall not include economizer operations on any of the HVAC systems being installed. Outdoor air economizers will not be utilized for this facility.
5. RTU-4 shall include humidity control. RTU 1 has a dehumidification sequence listed, this sequence also applies to RTU-4. Provide all hardware and software as needed to accomplish dehumidification control.
6. The Contractor shall provide minor design services and construction to analyze and address any positive building pressurization issues. The design shall provide and maintain a building static
Page 2 of 2 UHHZ 170241 pressure of approximately 0.05 inches (12.5 Pa) positive static pressure near the building entries. No additional roof penetrations will be permitted in this project.
7. The GOV has provided specification 03 30 53 “Cast In Place Concrete”.
George Davis Huckabee PE, PMP Electrical Engineer, Project Manager Project Execution Section Robins AFB: 78 CEG/Engineering Division
| 2018-03-12T09:46:26-0400 | |
| HUCKABEE.GEORGE.D.1539563900 |
File details come from the government source that posted it. Updated .