Tech Exhibit 5e_AFPSL Measurement Capabilities.doc

Technical Exhibit 5e

29 August 2018

AFPSL MEASUREMENT CAPABILITIES

Air Force Critical Information

FIBER OPTICS MEASUREMENT AREA

Parameter Range Uncertainty Reference Std.

Power Sensitivity Non-Connectorized 0 to -60 dBm:

800 - 900 nm ±0.25 dB (1%

1250 - 1350 nm

1500 - 1600 nm

Connectorized +3 to -60 dBm

800 - 900 nm ±2%

1250 - 1350 nm

1500 - 1600 nm

(1%

Spectrum Analyzers 365 nm to 1530 nm ±0.5 nm (0.05 nm

(Wavelength)

Sources (LEDs & LDs) Spectral Properties ±2 nm

0.5 nm

INFRARED MEASUREMENT AREA

Radiometric Temperature 200 - 1200 (C ±1.40 (C ±0.22 (C with Emissivity

(0.005 (0.00002 (Blackbodies)

Spectral Radiance <300 nm ±4% ±1.7% (Lamps) 300-2400 nm ±3% ±1.1% Spectral Irradiance <350 nm ±5% ±2.2% (Lamps) 350 – 1600 nm ±4% ±1.9%

>1600 nm ±8% ±6.5% Noncontact Thermometry 20 - 800( C ±5% of F.S.

850 - 2300( C (6( C (2.5( C

2300 - 2500( C (8( C (2.5( C

Spectral Transmission Wavelength (185 - 3200 nm) ±0.6 nm

Transmittance

(10% - 100%) ±2.5% of Value

(1.0% - 10%) ±5% of Value

(0.1 % - 1.0%) ±8% of Value

(less than 0.1 %) ± 15% of Value

Spectral Transmission Wavelength (2.5 - 25 (m) ±0.6 (m

Transmittance

(10% - 100%) ±2.5% of Value

(1.0% - 10%) ±5% of Value

(0.1% - 1.0%) ±8% of Value

(less than 0.1%) ±15% of Value

LASER MEASUREMENT AREA

Parameter Range Uncertainty Reference Std.

Peak Power (Irradiance)

1.06 (m, 1.0 - 100 mW/cm2 ±2.5 dB ±7.0%

1 (W/cm2 - 1.1 W/cm2 ±15.0% ±7.0%

Fluence (Energy/Pulse)

1.06 (m, 10 - 7000 fJ/cm2 ±10.0%

Average Power (Q-Switched)

1.06 (m, 1.0 mW - 3 W ±5.0% ±1.0%

CW Power 488 nm, 1.0 mW - 2.0 W ±5.0% ±1.0%

514.5 nm, 1.0 mW - 2.0 W

632.8 nm, 20 nW - 60 mW

1.06 (m, 1.0 mW - 2.0 W

10.6 (m, 200 mW - 150 W

±2.0%

10.6 (m, 50 W - 1500 W

±3.0%

CW Power (On-Site) 1 - 11 (m, 50 W - 200 kW ±5.0% ±3.0%

PHOTOMETRICS MEASUREMENT AREA

Luminous Intensity 25 - 2000 Candela ±2.0% (0.5%

Color Temperature 2000 - 3200( K ±20( K From Spectral Irradiance

Luminous Directional Intensity

0.43 - 0.7 fL/fC ±1.5% (0.7%

UV Irradiance 365 nm, 0 -3 mW/ cm2 ±7%% (5%

RADIAC MEASUREMENT AREA

Alpha Standards

0 - 13,000,000 CPM

±5.0% ±1.0% Gamma Standards 1 mR/hr - 10,000 R/hr ±5.0% ±1.0% Alpha Meters

0 - 13,000,000 CPM

±20.0% ±1.0%

Gamma Meters 1 mR/hr - 500 R/hr ±10.0% ±1.0%

Neutron Meters 1 - 15,000 mRem/hr ±15.0% ±5.0%

DC/LOW FREQUENCY MEASUREMENT AREA

Parameter Range Uncertainty Reference Std.

Range/Uncertainty

Capacitance 0.01pf - 1000 pf @ 1000 Hz ±0.001% to ±0.002% 1000 pf @ 1000 Hz/± 0.0004%

1 pf @ 1000 Hz (Coaxial) ±0.1% 1 pf @ 1000 Hz/± 0.052%

Resistance

0.001 ( to 1T( ±0.0002% to ±0.2% 10 k(/± 0.000015%

10 k( ±0.0001%(w/historical data) 10 k(/± 0.000015%

1 ( ±0.0006%(w/historical data) 1 (/± 0.00005%

DC Current

0.00001 A to 300 A

±0.004 to ±0.02%

0.00001 A to100 A/±0.0004% to

±0.002%

AC Current 10 mA to 30 mA (100 kHz) ±0.015% 10 mA to 30 mA/±0.01%

10 mA to 20 A (1 kHz, 1 0 kHz) ±0.01% to ±0.03% 10 mA to 20 A/±0.005% to ±0.015%

Inductance 100 mH @ 1 kHz ±0.03% 100 mH @ 1 kHz/±0.02%

Thermal Voltage Converters 0.45V to 100 V (1 MHz to 100 MHz) ±0.06% to ±1.1% Same/±0.02% to ±0.5%

Thermal Transfer 0.0022V to 1000 V (10 Hz to 30 MHz) ±0.0022% to ±0.62% Same/±0.001% to ±0.5%

Standard Multi-range

AC Flatness Input Resistance: 50 ( ±1.0% Measured w/DMM

(Peak-to-Peak Detector) Sensitivity: 1% P-P change to ±1 mV Measured w/DMM produce a 10 mV DC change in output

Frequency Response:

±0.2% to ±1.6% 50 Hz to 500 MHz/±0.08% to ±1.2%

(50 kHz reference)

0.1 MHz to 500 MHz

Helmholtz Coils 0 to 1000 Gauss ±0.1 % to ±2.5% Absolute Standard

(magnetic field strength)

Reference Magnets 0 to 20 kGauss ±0.6% to ±2.5% Absolute Standard

DC Voltage (low) Standard Cells: 1.018 V

1.018 V/±0.00005%

Zener Reference: 10 V

10 V/±0.00005%

DC Voltage (high) 5 kV to 100 kV ±0.025%

5 kV to 75 kV/±0.01%

AC Voltage (high) 15 kV to 100 kV ±1.0%

5 kV to 75 kV/±0.03%

DC Voltage Ratio 0 to 1.0 ±0.05 ppm (terminal linearity) N/A

10: 1 ratio ±0.2 ppm

100: 1 ratio ±0.5 ppm N/A

AC Voltage Ratio Transfer Ratio Corrections

0 to 1.0 (50 Hz to 10 kHz)

(50 Hz to 1 kHz) ±0.0001% (50 Hz to 1 kHz)/±0.00005%

(1 kHz to 10 kHz) ±0.0001% x (Freq(kHz)2 ) (1 kHz to 10 kHz)/±0.00005% x (Freq(kHz)2)

Risetime 25 Picoseconds ±7 Picoseconds 25 Picoseconds/±5 Picoseconds

Precise Time and Time: Universal Time Coordinate ±10 nanoseconds of UTC

USNO

Frequency steered by USNO

Frequency: 100 kHz to 10 MHz ±1.1 X 10-13 fractional

USNO

frequency offset

Phase Angle 1 Hz to 100 kHz ±(5+0.1 R) millidegrees to ±(48+R) millidegrees where R is the ratio of the larger to the smaller output voltage (i.e. reference voltage, variable phase voltage)

RF/MICROWAVE MEASUREMENT AREA

Parameter Range Uncertainty Reference Coaxial Power

0.1 to 10 MHz

1.0 to 1.25% 0.5%

0.01 to 18 GHz

1.5 to 2.6%

0.8 to 1.7%

18 to 26.5 GHz 4.4% 2.4%

26.5 to 40 GHz 4.0% 2.1%

Waveguide Power

8.2 to 40 GHz

1.75 to 3.6%

1.5 to 2.4%

33 to 50 GHz

2.6 to 4.5%

1.65 to 3.54%

High Power

1 MHz to 1.3 GHz

3.0 to 3.5%

2.4 to 2.9%

1 to 1000 Watts Attenuation

1.25 MHz (Var)

0.01 dB of charted value 0.002/6 dB*1

30 MHz

0.01 dB of charted value 0.005/10 dB*1

2.5 MHz to 26.5 GHz (0 to 100 dB)

0.015+0.005/10 dB step+1digit*1 0.003+0.003/10 dB*1

2.5 MHz to 26.5 GHz (100 to 120 dB)

0.015+0.05/10 dB step+1digit* 0.003+0.003/10 dB*1

2.5 MHz to 26.5 GHz (120 to 127 dB)

0.05+0.02/10 dB step+1digit 0.003+0.003/10 dB*1

+0.18 dB noise*1

26.5 to 40 GHz (0 to 50 dB) 0.045*2

0.01 dB of charted value

Coaxial Reflection BNC: 100 kHz to 100 MHz

0.01 to 0.03*2 <0.00025 @ 30 MHz

Coefficient 14 mm: 100 kHz to 8.5 GHz

0.007 to 0.04*2

0.0016 to 0.0020*2

N: 100 kHz to 18 GHz

0.007 to 0.04*2

0.0011 to 0.0020*2

7 mm: 100 kHz to 18 GHz

0.005 to 0.025*2

0.0016 to 0.0018*2

3.5 mm: 100 kHz to 26.5 GHz

0.01 to 0.07*2

0.0015 to 0.0030*2

2.92 mm: 100 kHz to 40 GHz (SWR<2)

0.025 to 0.15*2

0.0009 to 0.0012*1

2.4 mm: 100 kHz to 40 GHz (SWR<2)

0.015 to 0.09*2

0.0009 to 0.0012*1 Waveguide Reflection

2.6 to 40 GHz (SWR <2)

0.015 to 0.06*2 <1.01413*2 Coefficient

40 GHz to 50 GHz (SWR <2) <1.1 <1.01413*2 VHF Omnidirectional 0 to 359.99 degrees

0.09 degrees 0.01( @ 0( Ranging

0.02( @ all other bearing angles

AM (Instrument Landing 90, 150 Hz (0.1 to 0.2)% 0.05%

System)

(Based on a modulation depth of 0 to 50%)

AM Modulation 20 Hz to 100 kHz 1 to 3%*2 0.3% of reading + 1 digit*2

(1 50 kHz to 1300 MHz carrier frequency)

FM Modulation 20 Hz to 200 kHz 1 to 5%*2 0.75% rdg*2

(250 kHz to 1300 MHz

Phase Modulation 200 Hz to 20 kHz 3*3 0.1% (Total Harmonic

(1 50 kHz to 1300 MHz

Distortion)

Power Density 2450 MHz 2 dB

0.5 dB

Coaxial Thermal Noise

0.01 to 8 GHz

0.23 dB*4

0.23 dB*4

8 to 26 GHz

0.32 dB*4

0.32 dB*4

26.5 GHz

0.35 dB

0.35 dB

Waveguide Thermal Noise

8.2 GHz to 12.4 GHz

0.2 dB

0.05 dB*4

12.4 to 18 GHz

0.25 dB

0.09 dB*4 Phase Noise 5 MHz to 1.6 GHz 2 dB (0.01Hz to 1MHz offset)

0.3 to 2.0 dB (Spec An linearity)

1.6 GHz to 18 GHz

4 dB (1MHz to 40MHz offset)

0.3 to 2.0 dB (Spec An linearity)

Phase

0.045 to 26.5 GHz

0.2 to 180 degrees

0.2 to 180 degrees

(Reflection/Transmission)

(varies with frequency, (varies with frequency, connector type, and connector type, and reflection/transmission reflection/transmission coefficient) coefficient)

*1 Plus mismatch error

*2 Varies with frequency and reflection coefficient

*3 Varies with carrier frequency and modulation rate

*4 Varies with frequency

FORCE MEASUREMENT AREA

Parameter Range Uncertainty Reference Std.

Dead Weight Machines 0- 100000 lbf ±0.003% rdg

GAS FLOW MEASUREMENT AREA

Nozzle Stand 0 - 440 scfm ±0.5% rdg NIST Cal'd Nozzles ±0.30% rdg

Laminar Stds

0.02 - 1 000 lpm ±1% rdg NIST Traceable Element ±0.25% rdg Volumetric Displacement

0.02 - 50 lpm ±1% rdg Bell Provers ±0.30% rdg Air Velocity 30 - 9000 fpm ±4% rdg Wind Tunnel ±2.0% rdg

MASS MEASUREMENT AREA

Mass (minimum) 1 milligram ±5 micrograms

Mass (maximum) 50 Kilograms ±9.85 milligrams

PRESSURE MEASUREMENT AREA

Pneu. Pressure Piston Gauge 0.2-700 psi ±0.006% rdg

Hydraulic Pressure Piston Gauge 50-40000 psi ±0.01% rdg

Hydraulic Pressure Piston Gauge 6-15000 psi ±0.01% rdg

Oxygen Pressure Piston Gauge 500-15000 psi ±0.01 % rdg

SOUND MEASUREMENT AREA

Microphones (re 1 V/Pa) 50 - 10 kHz ±0.15 dB NIST Cal'd Microphone +0.09 dB

Sound Dosimeters 2 Hz - 10 kHz ±0.30 dB NIST Cal'd Microphone +0.09 dB

Sound Calibrators 1 kHz ±0.50 dB NIST Cal'd Microphone +0.09 dB Sound Level Meters 2 Hz - 10 kHz ±0.50 dB NIST Cal'd Microphone +0.09 dB

Piston Phones 250 Hz ±0.30 dB NIST Cal'd Pistonphone +0.10 dB

TEMPERATURE MEASUREMENT AREA

Thermocouples 0 to 11000 C ±10 C NIST Cal'd Thermocouple ±0.10 C Platinum Resistance Therm.

-190 to 6610 C ±0.010 C NIST Cal'd SPRT <±0.000 C Optical Pyrometer 900 to 22000 C ±1% of Scale NIST Cal'd Pyrometer ±1.0% Scale

VACUUM MEASUREMENT AREA

Low Vacuum(Capacitance Gage) 10-3 Torr to 1 Torr ±0.001 to ±0.007 Torr NIST Cal'd Gage ±0.3% rdg Low Vacuum 1 Torr to 100 Torr ±0.00625 to ±0.65 Torr NIST Cal'd Gage ±0.3% rdg High Vacuum (Ion Gauge) 10-8 Torr to 10-4Torr ±20% to ±40% rdg NIST Cal'd Gage ±6 to 25% rdg High Vacuum(Spin Rotor Gauge) 10-6 Torr to 10-2 Torr ±5% rdg NIST Cal'd Gage ±1.0% rdg

HUMIDITY MEASUREMENT AREA

Dewpoint -70 to 200 C ±1.50 C NIST Cal'd Chilled Mirror ±0.30 C Relative Humidity 5 to 95% ±1.5% rdg Dual Pressure/Temp System ±1.0 %

VIBRATION MEASUREMENT AREA

Accelerometers 5 Hz to 10 kHz ±3.0% of output NIST Cal'd Accelerometer ±1 to 2% of output

DIMENSIONAL MEASUREMENT AREA

Parameter Range Uncertainty Reference Std.

Gage Blocks 0 to 0.090 inch ±3 (in ±2 (in

±6 (in

0.100 to 4 in

5 to 12 in ±3 (in

5 to 20 in ±1 (in/in ±1 (in/in

Horizontal Length 0 to 12 in ±20 (in

13 to 36 in ±2 (in/in ±1 (in/in

Circularity

0.0625 to 4 in ±4 (in

4 to 12 in ±4 (in ±1 (in/in

Cylindricity 1 to 4 in ±30 (in

4 to 11 in ±30 (in ±1 (in/in

Flatness 4 to 12 in ±0.5 (in

1 to 12 in ±1.5 (in above 12 to 16 in ±4.0 (in ±0.5 (in

Surface Finish 2 to 100 (in ±2% of Nominal ±0.51 (in

(Depth of SCRATCH)

8 to 250 (in ±2% of Nominal ±0.59(in

(Ra)

Internal/External Diameters

0.125 to 4.0 in

4 to 7 in ±8 (in ±1 (in/in

Internal/External Thread 0 to 4 in ±40 (in ±2 (in

Geometry

Thread Wires 80 to 4 pitch diameter ±20 (in ±2 (in

Steel/Glass Scales 0 to 4 in ±50 - 100 (in

4 to 18 in ±50 - 100 (in ±1 (in/in

OPTICS MEASUREMENT AREA

Angle - Polygon Face 0 - 360 degrees ±0.25 arc sec Absolute Calibration

Angle - Angle Blocks 0 - 45 degrees ±0.4 arc sec

0.25 arc sec

Angle - Indexing Table 0 - 360 degrees ±0.5 arc sec Absolute Calibration

Pentaprism 90 degrees ±0.25 arc sec Absolute Calibration

Angle - Theodolite (First Order)

Horizontal Circle 0 - 360 degrees ±0.4 arc sec Absolute Calibration

Collimation

±2 arc sec 1 arc sec

Vertical Leveling

±1 arc sec

Angle - Tilt Angle Generator 0 - 100 arc sec ±0.2% of nominal

0.1 arc sec

100 - 1000 arc sec ±0.3% of nominal

0.2 arc sec

Angle - Autocollimator 10 arc sec ±0.01 arc sec* Modeling technique

40 arc sec ±0.03 arc sec*

150 arc sec ±0.05 arc sec*

300 arc sec ±0.5 arc sec

0.2 arc sec

1800 arc sec ±2 arc sec

0.5 arc sec

Mirror Flatness 1 -10 inch diameter ±1.0 (in

0.5 (in Mirror Flatness (Rectangular) up to 18 in ±1.0 (in

0.5 (in Laser Frequency Stability

546.1 - 632.8 nm ±5 x 10-10

(Power 3mw or less)

Length - Electronic Distance 0 to 100 m ±5 mm Absolute Calibration

Measuring above 100 - 1000 m ±7 mm Est. based on Comm data

*Based on AAMACS operation; without AAMACS, 0.25 arc sec