Attachment III GFP_List_V3 TYCOM5.xlsx

9 MB Posted

Attached to
USS BLUE RIDGE 5C1 DSRA TYCOM 5
Solicitation number
N6264925RA054
Issued by

About this file

Written by GovTribe AI ·

Attachment III GFP_List_V3 TYCOM5.xlsx is a supplementary document related to a Navy ship repair solicitation (N6264925RA054) for the USS BLUE RIDGE (LCC-19) Docking-Selected Restricted Availability (DSRA) at the US Naval Ship Repair Facility and Japan Regional Maintenance Center. The contract encompasses comprehensive ship repair and maintenance work, including 13 Task Group Instructions (TGIs) covering eight test phases involving ship repair, overhaul, preservation, and replacement activities.

The solicitation requires the contractor to manage all aspects of the project, including labor, subcontractor coordination, quality control, safety management, and environmental compliance. The anticipated contract period of performance runs from January 12, 2026, through May 15, 2027. Offerors must submit all required information by June 30, 2025, at 10:00 AM Japan Standard Time. The contract includes specific ship alterations and modifications, such as deaerating feed tank sightglass indicator drain piping modification, air conditioning load center work, and countermeasure washdown piping changes. Proposals must address hazardous materials identification and potential sea transportation requirements.

View the file

Other files

File Type Posted
Exhibit (A) BLR_5C1_TYCOM5 CDRL_r.pdf PDF
N6264925RA0540003.pdf PDF
N6264925RA0540002.pdf PDF
TGI_3819P59301A01_c0v0.pdf PDF
BLR_5C1_TYCOM5 CDRL.pdf PDF
TGI_3819P51418T01_c0v0.pdf PDF
TGI_3819P52802A01_c0v0.pdf PDF
TGI_3819P52801_T01_c0v0.pdf PDF
TGI_3819P51418T02_c0v0.pdf PDF
TGI_3819P51418A04_c0v0.pdf PDF
TGI_3819P123AFA01_c0v0.pdf PDF
TGI_3819P59301T01_c0v0.pdf PDF
TGI_3819P52808A01_c0v0.pdf PDF
TGI_3819P51413A01_c0v0.pdf PDF
TGI_3819P51420A01_c0v0.pdf PDF
TGI_3819P52802T01_c0v0.pdf PDF
TGI_3819P51419A01_c0v0.pdf PDF
TGI_3819P123AAA01_c0v0.pdf PDF
TGI_3819P52801_A01_c0v0.pdf PDF
TGI_3819P52808T01_c0v0.pdf PDF
TGI_3819P51413T01_c0v0.pdf PDF
TGI_3819P52806A01_c0v0.pdf PDF
TGI_3819P123ADA01_c0v0.pdf PDF
TGI_3819P52806_T01_c0v0.pdf PDF
TGI_3819P14218A01_c0v0.pdf PDF
N6264925RA054 Amendment 0001.pdf PDF
Attachment VIII Source of Repair Instruction.pdf PDF
2.01 N6264925RA054 Solicitation.pdf PDF
Attachment VI Quality Assurance Surveillance Plan (QASP).pdf PDF
Attachment VII Warranty Tracking Information.pdf PDF
Attachment V Contract data.pdf PDF
Attachment II Proposal Sheet Generator v1.2.xlsx XLSX spreadsheet
Attachment IV-3 Request for Information Form (SAMPLE).docx DOCX document
Exhibit (A) CDRL BLR_5C1_TYCOM5.pdf PDF
Show all 34

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT INFO

GOVERNMENT FURNISHED PROPERTY* denotes a required field
† A minimum of one of these fields is required

Attachment Number* 3 Attachment Date* 2025-05-19

GOVERNMENT CONTRACTING OFFICER

Name Ai Gillard Email ai.gillard.ln@us.navy.mil Phone 0468-16-3805

Attachment Type* Solicitation Mod Number Amendment No.

CUSTODIAL PROCUREMENT INSTRUMENT IDENTIFICATION

Contract Number Type*

Contract Number (DoD Contract (FAR) Contract Number Type) †Order Number (DoD Contract (FAR) Contract Number Type)OR
PIID FORMAT (FY16+)Old Order Format
N6264925RA054
Issuing Office DoDAACIssuing YearContract TypeSequence NumberIssuing Office DoDAACIssuing YearContract TypeSequence Number
Solicitation or Contract Number
(All other Contract Number Types) †Order Number

(All other Contract Number Types)

N6264925RA054

Consolidated GFP Attachment Version 3.0 3-25

Provisioned

* denotes a required field † A minimum of one of these fields is required for each item record †† If either "Mfr CAGE" or "Part Number" is entered, the other is required.

If any one of duration, time unit, or delivery event are populated, all 3 must be populated.

Provisioned Items

LINE NUMBER*ITEM NAME*ITEM DESCRIPTION*NSN†MFR CAGE†,††PART NUMBER†,††MODEL NUMBER†SERIALLY MANAGED?*PROPERTY TYPEPROPERTY USAGEPROPERTY SYSTEM IDQTY*UNIT OF MEASURE*UNIT ACQ COSTUSE AS-IS*UPGRADABLE?DELIVERY DATEDURATIONTIME UNITDELIVERY EVENTNOTES
1BEAM, I-T SHAPEBEAM, I-T SHAPE, SIZE: 16" X 7" X 40LBS, MATL: STEEL OS, I-T BEAM, 40LBS, CUT FROM 16" X 7" X 40#, I9999LL4944351No10.00000FOOT157.21trueNo3819P123AAA01
2BEAM,STRUCTURALORIGINATOR: C231B N. KUROKAWA 243-0108
ORDER FOR KTR9520002780359No3.00000FOOT39.48trueNo3819P123AAA01
3PLATE,ME1F X 2F

ORIGINATOR: C231B N. KUROKAWA 243-0108

ORDER FOR KTR9515001533223No2.00000SQUARE FOOT30.97trueNo3819P123AAA01
4PLATE,ME1F X 2F

ORIGINATOR: C231B N. KUROKAWA 243-0108

ORDER FOR KTR9515001533236No2.00000SQUARE FOOT23.53trueNo3819P123AAA01
5PLATE,ME1F X 2F

ORIGINATOR: C231B N. KUROKAWA 243-0108

ORDER FOR KTR9515002375333No2.00000SQUARE FOOT14.70trueNo3819P123AAA01
6PLATE,ME1F X 9F

ORIGINATOR: C231B N. KUROKAWA 243-0108

ORDER FOR KTR9515001533184No9.00000SQUARE FOOT20.08trueNo3819P123AAA01
7PLATE,ME5F X 5F

ORIGINATOR: C231B N. KUROKAWA 243-0108

ORDER FOR KTR9515001533230No25.00000SQUARE FOOT16.50trueNo3819P123AAA01
8CONDENSER,SPIRALS9514-EL-MMA-010 FIGURE 7-34-19

ORDERED FOR X37R

C232 Y. KUBO 243-42284130011847391No1.00000EACH2724.87trueNo3819P51413A01
9COUPLINGORDERED FOR X37R
C232 Y. KUBO 243-42284730002649153No4.00000EACH0.50trueNo3819P51413A01
10COUPLINGORDERED FOR X37R
C232 Y. KUBO 243-42284730002649156No2.00000PACKAGE1.91trueNo3819P51413A01
11LEAK DETORDERED FOR X37R
C232 Y. KUBO 243-42286850001862963No5.00000BOTTLE9.84trueNo3819P51413A01
12LUBRICATORDERED FOR X37R
C232 Y. KUBO 243-42289150014439390No1.00000GALLON126.54trueNo3819P51413A01
13OIL, VACULVAC VACUUM PUMP OIL, SMR-100 (PART#: 1001879) 1GL(4L)/CN.

ORDERED FOR X37R

C232 Y. KUBO 243-42289150LHA000722No3.00000CAN160.00trueNo3819P51413A01
14BALL,BEARINGORDER FOR X51EI
ORIG: CODE 233 S.OGAWA, 090-6170-85793110009873731No1.00000EACH2515.00trueNo3819P51418A04
15BEARING,BALL,ANNULAORDERED FOR: CONTRACTOR

ORIG: CODE 233 S.OGAWA 090-6170-8579

3110009873729No1.00000EACH3390.00trueNo3819P51418A04
16GASKETORDER FOR X51EI
ORIG: CODE 233 S.OGAWA, 090-6170-85795330011434257No1.00000EACH259.19trueNo3819P51418A04
17GASKETORDER FOR X51EI
ORIG: CODE 233 S.OGAWA, 090-6170-85795330013654371No1.00000EACH505.63trueNo3819P51418A04
18NUT,PLAIN,HEXAGONORDERED FOR: CONTRACTOR

ORIG: CODE 233 S.OGAWA 090-6170-8579

5310013755723No1.00000EACH196.36trueNo3819P51418A04
19NUT,PLAIN,ROUNDORDER FOR X51EI
ORIG: CODE 233 S.OGAWA, 090-6170-85795310013333808No1.00000EACH162.39trueNo3819P51418A04
20WASHER,SPRING TENSIORDER FOR X51EI
ORIG: CODE 233 S.OGAWA, 090-6170-85795310012509667No1.00000EACH287.47trueNo3819P51418A04
21RUBBER SHEET,SOLIDORIG. C232 M. FUDO, 243-4512
ORDERED FOR KTR9320010415249No1.00000SHEET34.21trueNo3819P52801A01
22VALVE,PLUGORIG. C232 M. FUDO, 243-4512
ORDERED FOR KTR4820016709076No1.00000EACH11332.94trueNo3819P52801A01
23ADHESIVEADHESIVE FOR CLOTH

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09768040002738708No6.00000GALLON48.90trueNo3819P52802A01
24ADHESIVEADHESIVE FOR INSULATION SLEEVING

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-0976

8040008419773No10.00000PINT12.21trueNo3819P52802A01
25BACKING1-1/2" IPS, CU-NI 90-10, 200PSIG

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4558777No6.00000EACH116.00trueNo3819P52802A01
26BACKING2-1/2" IPS, CU-NI 90-10, 200PSIG

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4558781No1.00000EACH143.25trueNo3819P52802A01
27BACKING2" IPS, CU-NI 90-10, 200PSIG

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4558779No11.00000EACH99.60trueNo3819P52802A01
28BACKING,3" IPS, CU-NI 90-10, 200PSIG

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4558783No30.00000EACH39.00trueNo3819P52802A01
29BACKING RINGBACKING RING, SIZE: 2-1/2"IPS, 1"WIDE, MATL: CARBON STEEL, SCH 40, MIL-STD-22D.
*REQUEST ENSURE THAT4730LL9304380No1.00000EACH208.00trueNo3819P52802A01
30BACKING RING, 1-1/2"BACKING RING 1-1/2" IPS, 3/4" WIDTH, SCH 40, CRES 316L, MIL-STD-22D
*REQUEST ENSURE THAT THREE (3) S4730LL9308623No1.00000EACH210.00trueNo3819P52802A01
31COUPLINGREDUCER, SOCKET WELDING, SIZE: 2" IPS X 1-1/2" IPS, PRESSURE: 3000PSI, MATL: ASTM A128, CRES 316,
O4730LL9308479No1.00000EACH360.00trueNo3819P52802A01
32COUPLING,TUBE1-1/2" IPS, CU-NI 90-10, BW, FV=5EA

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730007225467No1.00000FIVE140.48trueNo3819P52802A01
33COUPLING,TUBE2" IPS, CU-NI 90-10, BW

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730005423290No2.00000EACH25.99trueNo3819P52802A01
34COUPLING,TUBE3" IPS, CU-NI 90-10, BW, PG=2EA

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730007225473No5.00000PACKAGE73.96trueNo3819P52802A01
35DECK SLEEVESLEEVE, WELDED BULKHEAD OR DECK SLLEVES, FOR PIPING 3"IPS, SIZE: 4.000 INCH OD X 0.245 INCH THK X 4.4730LL9309208No2.00000EACH268.00trueNo3819P52802A01
36ELBOW 452-1/2" IPS, CU-NI 90-10, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-0976

4730LL4462384No3.00000EACH43.00trueNo3819P52802A01
37ELBOW 90ELBOW 90, 3"IPS, BW, SR, 90/10, 200PSI

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4462378No1.00000EACH95.00trueNo3819P52802A01
38ELBOW 90ELBOW 90, SIZE; 1-1/2"IPS, SOCKET WELD,

CRES 316L, ASTM-A182,

3000 PSI,

ASME-B16.11

ORDERED FOR KTR

4730LL4946805No3.00000EACH80.00trueNo3819P52802A01
39ELBOW,PIPEELBOW 45, 3" IPS, CU-NI 90-10, BW

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730005423335No8.00000EACH175.89trueNo3819P52802A01
40ELBOW,PIPEELBOW 90, 2-1/2" IPS, SW, CU-NI 90-10

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730014637046No1.00000EACH264.02trueNo3819P52802A01
41ELBOW,PIPEELBOW 90, SIZE; 2"IPS, SOCKET WELD,CRES 316L, CLASS 3000, ASME-B16.11

ORDERED FOR KTR

ORIG:C234 O.MI4730016110284No3.00000EACH64.61trueNo3819P52802A01
42ELBOW,TUBEELBOW 45, 2" IPS, CU-NI 90-10, BW

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730007203959No3.00000EACH237.05trueNo3819P52802A01
43ELBOW,TUBEELBOW 90, 2" IPS, CU-NI 90-10, BW, LR, 200PSI

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730007256990No1.00000EACH119.39trueNo3819P52802A01
44FLANGE C, 1-1/2"IPS,FLANGE, COMMERCIAL, SLIP-ON, FLAT FACE, SIZE: 1-1/2" IPS, MATL: CRES 316L, 150 PSI, SPEC: ASME B16.54730LL4892641No3.00000EACH103.00trueNo3819P52802A01
45FLANGE C, 2"IPS,FLANGE, COMMERCIAL, SLIP-ON, FLAT FACE, SIZE: 2" IPS, MATL: CRES 316, PRESSURE: 150PSI, SPEC: ASME B4730LL9311057No1.00000EACH117.70trueNo3819P52802A01
46FLANGE, NAVYFLANGE, NAVY, SOCKET WELD, SIZE: 2"IPS, MATL: CU-NI 70/30, PRESURE: 150PSI, DWG: 810-4715319, FIG 2-4730LL4462164No1.00000EACH330.00trueNo3819P52802A01
47FLANGE,PIPE2" IPS, CU-NI 90-10, SW, 150PSI

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-0976

4730014645353No1.00000EACH130.95trueNo3819P52802A01
48GASKETBLUE GARD 3200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09765330015446752No1.00000SHEET548.34trueNo3819P52802A01
49INSULATIINSULATION, PIPE,

BRAND: K-FLEX ECO,

SPECIFICATION COMPLIANCE: EB 4013,

FOR 5" IPS,

SIZE: 5-1/2" ID5640LL9607849No2.00000EACH250.00trueNo3819P52802A01
50INSULATIINSULATION, PIPE,

BRAND: K-FLEX ECO,

SPECIFICATION COMPLIANCE: EB 4013,

FOR SIZE: 2-1/8" OD TUBE,

SI5970LL9607843No10.00000EACH32.00trueNo3819P52802A01
51INSULATIINSULATION, PIPE,

BRAND: K-FLEX ECO,

SPECIFICATION COMPLIANCE: EB 4013,

FOR SIZE: 2" IPS,

SIZE: 2-3/5970LL9607844No16.00000EACH49.43trueNo3819P52802A01
52INSULATIINSULATION, PIPE,

BRAND: K-FLEX ECO,

SPECIFICATION COMPLIANCE: EB 4013,

FOR SIZE: 3" IPS,

SIZE: 3-1/5970LL9607846No15.00000EACH69.29trueNo3819P52802A01
53LATERALLATERAL. BUTT WELD, SIZE: 3" X 3" X 2"IPS, MATL: COPPER NICKEL 90/10, PRESSURE: 200 PIS, DWG: 810-134730LL9001888No1.00000EACH986.00trueNo3819P52802A01
54LATERAL, 3"IPS, BW,LATERAL, BUTT WELD, SIZE: 3"IPS, MATLE: CU-NI 90/10, PRESSURE: 200PSI, DWG: 810-1385880.
PREMIER COP4730LL4462421No1.00000EACH839.00trueNo3819P52802A01
55PIPE,METALLIC2-1/2" IPS, GALV STEEL, SCH 40

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764710002775467No2.00000FOOT5.89trueNo3819P52802A01
56PIPE,METALLICORDERED FOR KTR
ORIG:C234 O.MITSUI 243-09764710010259582No2.00000FOOT41.30trueNo3819P52802A01
57PIPE,METALLICPIPE METAL, 2"IPS, CRES 316L, SCHEDULE 40, SEAMLESS, ASTM A312,

ORDERED FOR KTR

ORIG:C234 O.MITSUI 24710016027048No15.00000FOOT73.73trueNo3819P52802A01
58PIPE,METALLICPIPE, METAL, SIZE: 1-1/2"IPS (1.900"OD X 0.145"THK), MATL: CRES 316, SHEDULE 40, MIL-P-24691/3
ORDER4710002777868No15.00000FOOT40.85trueNo3819P52802A01
59PIPE,METALLICPIPE, METAL, SIZE: 2"IPS (1.900"OD X 0.154"THK), MATL: CRES 316, SHEDULE 40, MIL-P-24691/3
ORDERED F4710002777869No15.00000FOOT13.42trueNo3819P52802A01
60TEETEE, REDUCING, BUTT WELD, SIZE: 3" X 3" X 1-1/2"IPS, MATL: CU-NI 90/10, PRESSURE: 200 PSI, DWG: 810-4730LL9311058No1.00000EACH650.00trueNo3819P52802A01
61TEE, 1-1/2"IPS, SW,TEE, SIZE; 1-1/2"IPS, SOCKET WELDING, CRES 316, ASTM A182, 3000 PSIG, ASME B16.11

ORDERED FOR KTR

O4730LL9305016No1.00000EACH140.65trueNo3819P52802A01
62TEE,TUBE3" IPS, CU-NI 90-10, BW, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-0976

4730007225483No1.00000EACH259.41trueNo3819P52802A01
63TUBE,METALLIC1-1/2" IPS, CU-NI 90-10, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764710002898005No15.00000FOOT25.95trueNo3819P52802A01
64TUBE,METALLIC2-1/2" IPS, CU-NI 90-10, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764710002898007No2.00000FOOT45.93trueNo3819P52802A01
65TUBE,METALLIC2" IPS, CU-NI 90-10, CL200

ORDERED FOR X56P

ORIG:C234 O.MITSUI 243-09764710002898006No25.00000FOOT45.91trueNo3819P52802A01
66TUBE,METALLIC3" IPS, CU-NI 90-10, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764710006047978No20.00000FOOT78.89trueNo3819P52802A01
67TUBE,METALLIC3" IPS, CU-NI 90-10, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764710006047978No20.00000FOOT78.89trueNo3819P52802A01
68TUBE,METALLIC3" IPS, CU-NI 90-10, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-0976

4710006047978No20.00000FOOT78.89trueNo3819P52802A01
69VALVE,BALLORDERED FOR KTR
ORIG:C234 O.MITSUI 243-09764820012183307No1.00000EACH2874.70trueNo3819P52802A01
70VALVE,BALLORDERED FOR KTR
ORIG:C234 O.MITSUI 243-09764820013326818No1.00000EACH2269.50trueNo3819P52802A01
71BACKING4 INCH IPS, CU-NI 70-30, BW, 200 PSI

ORDERED FOR: KTR

ORIG: C234 H. KOMOTO 070-7787-20474730LL4358122No30.00000EACH59.75trueNo3819P52806A01
72ELBOW,PIPE4 INCH IPS, CU-NI 70-30, 90, BW, CL200

ORDERED FOR: KTR

ORIG: C234 H. KOMOTO 070-7787-20474730014283175No8.00000EACH327.65trueNo3819P52806A01
73ELBOW,TUBE4 INCH IPS, CU-NI 70-30, 45, BW, CL200

ORDERED FOR: KTR

ORIG: C234 H. KOMOTO 070-7787-20474730007254005No8.00000EACH307.80trueNo3819P52806A01
74SLEEVE,4 INCH IPS, CU-NI 70-30, BW, CL200

ORDERED FOR: KTR

ORIG: C234 H. KOMOTO 070-7787-20474730LL4462305No10.00000EACH35.70trueNo3819P52806A01
75TUBE,METALLIC4 INCH IPS, CU-NI 70-30

ORDERED FOR: KTR

ORIG: C234 H. KOMOTO 070-7787-20474710006048328No60.00000FOOT185.38trueNo3819P52806A01
76TUBE,METALLIC4 INCH IPS, CU-NI 70-30

ORDERED FOR: KTR

ORIG: C234 H. KOMOTO 070-7787-20474710006048328No60.00000FOOT185.38trueNo3819P52806A01
77TUBE,METALLIC4 INCH IPS, CU-NI 70-30

ORDERED FOR: KTR

ORIG: C234 H. KOMOTO 070-7787-20474710006048328No60.00000FOOT185.38trueNo3819P52806A01
78ADHESIVEORDERED FOR KTR
ORIG:C234 Y.INOMATA, 243-45368040002738708No1.00000GALLON26.69trueNo3819P52808A01
79ADHESIVEORDERED FOR KTR
ORIG:C234 Y.INOMATA, 243-45368040008419773No1.00000PINT35.00trueNo3819P52808A01
80BACKINGBACKING RING, 5"IPS, CU-NI 70/30, 200PSIG, MIL-STD-22

ORDER FOR KTR

ORIG: C226 T.YAMAGUCHI, 070-77874730LL4480106No2.00000EACH78.35trueNo3819P52808A01
81BACKING RINGBACKING RING,

SIZE; 6"IPS,

MATL: CU-NI 70/30,

PRESSURE: 200PSIG,

SPEC: MIL-STD-22D

PREMIER COPPER P/4730LL4456561No6.00000EACH78.45trueNo3819P52808A01
82BAR,METALORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20609510001881775No4.00000FOOT519.58trueNo3819P52808A01
83BOLT,MACHINEORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20605306013765273No40.00000EACH33.31trueNo3819P52808A01
84ELBOW 90ELBOW, 90DEG, BUTT WELD, SHORT RADIUS,

SIZE: 6"IPS,

MATL: CU-NI 70/30,

PRESSURE: 200PSI,

DWG: 810-134730LL4462312No1.00000EACH454.00trueNo3819P52808A01
85ELBOW,PIORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20604730013271403No1.00000EACH1042.31trueNo3819P52808A01
86FLANGE,PORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20604730014635649No3.00000EACH563.39trueNo3819P52808A01
87FLANGE,PIPEORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20604730002568565No3.00000EACH380.00trueNo3819P52808A01
88INSULATIINSULATION, PIPE, BRAND: K-FLEX ECO, SPECIFICATION COMPLIANCE: EB 4013, FOR SIZE: 6" IPS, SIZE: 6-5/5640LL9607850No2.00000EACH165.00trueNo3819P52808A01
89INSULATION, PIPEINSULATION, PIPE,BRAND: K-FLEX ECO,SPECIFICATION COMPLIANCE: EB 4013,FOR 5" IPS,SIZE: 5-5/8" ID X 3/5640LL9607849No2.00000EACH250.00trueNo3819P52808A01
90NUT,PLAIORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20605310014522899No40.00000EACH37.96trueNo3819P52808A01
91REDUCER,ORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20604730013275202No1.00000EACH1756.05trueNo3819P52808A01
92RUBBER SORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20605330014905071No2.00000SHEET81.41trueNo3819P52808A01
93TUBE,METALLICORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20604710006048366No3.00000FOOT244.62trueNo3819P52808A01
94TUBE,METALLICORDER FOR KTR
ORIG: C226 T.YAMAGUCHI, 070-7787-20604710006048367No5.00000FOOT740.34trueNo3819P52808A01
95ADHESIVEADHESIVE FOR CLOTH

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09768040002738708No2.00000GALLON48.90trueNo3819P59301A01
96ADHESIVEADHESIVE FOR INSULATION SLEEVING

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09768040008419773No4.00000PINT12.21trueNo3819P59301A01
97ADHESIVEORDERED FOR KTR
ORIG:C234 Y.INOMATA, 243-45368040002738708No7.00000GALLON48.90trueNo3819P59301A01
98ADHESIVEORDERED FOR KTR
ORIG:C234 Y.INOMATA, 243-45368040008419773No7.00000PINT35.00trueNo3819P59301A01
99BACKING4" IPS, CU-NI 70-30, 200PSIG

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4358122No4.00000EACH59.75trueNo3819P59301A01
100BACKINGBACKING RING, 5"IPS, CU-NI 70/30, 200PSIG, MIL-STD-22

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4480106No7.00000EACH78.35trueNo3819P59301A01
101BACKING RING. 4"IPSBACKING RING. 4"IPS, CNA 70/30, 200PSIG

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364730LL4358122No32.00000EACH59.75trueNo3819P59301A01
102ELBOW 45DEGELBOW 45DEG, BUTT WELD, SIZE: 5"IPS, MATL: CU-NI 70/30, PRESSURE: 200PSI, DWG: 810-1385880,
PREMIER4730LL4462316No2.00000EACH2290.00trueNo3819P59301A01
103ELBOW 90, 4"IPS, BW,ELBOW 90, 4"IPS, BW, SR, 70/30, 200PSI

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364730LL4462310No2.00000EACH285.40trueNo3819P59301A01
104ELBOW,PI4"IPS, 70-30, 90DEG, BW, LR

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364730014283175No4.00000EACH306.00trueNo3819P59301A01
105ELBOW,TU4"IPS, 70-30, 45DEG, BW

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364730007254005No8.00000EACH307.80trueNo3819P59301A01
106ELBOW,TUBEELBOW 45, 4" IPS, CU-NI 70-30, BW

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730007254005No1.00000EACH287.47trueNo3819P59301A01
107FLANGE,PIPE5" IPS, CU-NI 70-30, SW, 150PSI

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730014635647No1.00000EACH524.86trueNo3819P59301A01
108INSULATIINSULATION, PIPE,

BRAND: K-FLEX ECO,

SPECIFICATION COMPLIANCE: EB 4013,

FOR 5" IPS,

SIZE: 5-1/2" ID5640LL9607849No4.00000EACH250.00trueNo3819P59301A01
109INSULATIINSULATION, PIPE,

BRAND: K-FLEX ECO,

SPECIFICATION COMPLIANCE: EB 4013,

FOR SIZE: 4" IPS,

SIZE: 4-1/5970LL9607848No3.00000EACH89.79trueNo3819P59301A01
110INSULATIINSULATION, PIPE,

BRAND: K-FLEX ECO,

SPECIFICATION COMPLIANCE: EB 4013,

FOR SIZE: 8" IPS,

SIZE: 8-5/5640LL9607851No2.00000EACH229.47trueNo3819P59301A01
111INSULATION, FLAT SHTINSULATION, FLAT SHEET,BRAND: K-FLEX ECO,SPECIFICATION COMPLIANCE: EB 4013,SIZE: 36" W X 48" L X 3/45640LL9607854No1.00000SHEET76.54trueNo3819P59301A01
112INSULATION, PIPEINSULATION, PIPE,BRAND: K-FLEX ECO,SPECIFICATION COMPLIANCE: EB 4013,FOR SIZE: 4" IPS,SIZE: 4-1/2" I5970LL9607848No12.00000EACH89.79trueNo3819P59301A01
113LATERALLATERAL. BUTT WELD, SIZE: 4"IPS, MATL: CU-NI 70/30, PRESSURE: 200 PIS, DWG: 810-1385880, SPEC: MIL-C4730LL4462347No1.00000EACH1728.00trueNo3819P59301A01
114SLEEVE,4" IPS, CU-NI 70-30, BW

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4462305No1.00000EACH35.70trueNo3819P59301A01
115SLEEVE,5" IPS, CU-NI 70-30, BW

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764730LL4462306No1.00000EACH98.25trueNo3819P59301A01
116SLEEVE, 4"IPS, BWSLEEVE, 4"IPS, BUTT WELD, CU-NI 70-30, 200PSI, DWG: 810-1385880

ORDERED FOR KTR

ORIG:C234 Y.INOMATA,4730LL4462305No10.00000EACH35.70trueNo3819P59301A01
117TEE,PIPE4"IPS, 70-30, BW

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364730014397295No1.00000EACH643.45trueNo3819P59301A01
118TUBE,MET4"IPS, 70-30, #200

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364710006048328No20.00000FOOT165.07trueNo3819P59301A01
119TUBE,MET4"IPS, 70-30, #200

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364710006048328No20.00000FOOT165.07trueNo3819P59301A01
120TUBE,MET4"IPS, 70-30, #200

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364710006048328No20.00000FOOT165.07trueNo3819P59301A01
121TUBE,MET4"IPS, 70-30, #200

ORDERED FOR KTR

ORIG:C234 Y.INOMATA, 243-45364710006048328No20.00000FOOT165.07trueNo3819P59301A01
122TUBE,METALLIC4" IPS, CU-NI 70-30, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-09764710006048328No5.00000FOOT173.13trueNo3819P59301A01
123TUBE,METALLIC5" IPS, CU-NI 70-30, CL200

ORDERED FOR KTR

ORIG:C234 O.MITSUI 243-0976

4710006048366 No 15.00000 FOOT 223.93 true No 3819P59301A01

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .