Attachment F_P1360 DWG_Part 9 of 12.pdf

10 MB Posted

Attached to
P1360: Joint Maritime Facility, Newfoundland, Canada
Solicitation number
N6247026R0011
Issued by

About this file

Written by GovTribe AI ·

This document is a comprehensive set of mechanical and electrical design drawings for a Joint Maritime Facility project prepared by Naval Facilities Engineering Systems Command (NAVFAC) - Atlantic. The drawings serve as construction documents for the facility's HVAC, piping, ductwork, and electrical systems.

The mechanical systems documentation includes detailed drawings for HVAC floor plans, mechanical piping layouts, ductwork configurations, and mechanical room details. Key mechanical components specified include air-cooled chillers, air handling units, fan coil units, ductless split-system heat pumps, electric unit heaters, and associated piping and ductwork. The mechanical schedules document equipment specifications including grille and register details, louver specifications, chiller capacity ratings (750 kVA service transformer), pump specifications with variable frequency drive motors rated up to 13.8 gpm, expansion tank sizing (37.8 liters acceptance volume, 180 liters total), and vibration isolation requirements. Control sequences are provided for various systems including DOAS (Dedicated Outdoor Air System), chilled water systems with three air-cooled chillers in parallel configuration, and building pressure control systems.

The electrical documentation includes site plans, underground ductbank and manhole details, pad-mounted transformer specifications (750 kVA, 12.47 kV Delta to 480Y/277V), and communications infrastructure. Electrical systems include fire pump circuits, generator connections (with resistive load bank), UPS systems for critical equipment, site lighting, intrusion detection and access control systems, video surveillance infrastructure, and telecommunications networks. The drawings specify underground concrete-encased ductbank construction with detailed specifications for pull-in irons, cable racks, and standard electrical hand holes and access structures. All work is specified in accordance with Canadian Electrical Code (CAN/CSA-C22.3) requirements and includes comprehensive grounding and lightning protection systems.

View the file

Other files

File Type Posted
N6247026R00110005 SF 30.pdf PDF
Solicitation Amendment N6247026R00110005 SF 30.pdf PDF
AMENDMENT 0005.pdf PDF
Attachment K _Moll Point Joint Maritime Facility NL Tech Memo.pdf PDF
Attachment J _ Hazardous Materials Report_2024_Appendix D of SEI.pdf PDF
P1360-Drawings- Amendment 0005.pdf PDF
N6247026R0011 Amendment 0004.pdf PDF
N6247026R0011 Amendment 0003.pdf PDF
Amendment 0003 Revised P1360 Demo-DWGS.pdf PDF
P1360 Site Visit Attendance Log.pdf PDF
AMENDMENT 0003.pdf PDF
Amendment 0003 Revised P1360 DWGS.pdf PDF
Amendment 0003 Revised P1360 Specifications.pdf PDF
Amendment N6247026R0008 0005.pdf PDF
Solicitation Amendment N6247026R0011 (0002).pdf PDF
Solicitation Amendment N6247026R00110001 (0001).pdf PDF
Solicitation - N6247026R0011.pdf PDF
Attachment E_P1360 SPECS_Part 3 of 5.pdf PDF
Attachment E_P1360 SPECS_Part 2 of 5.pdf PDF
Attachment F_P1360 DWG_Part 10 of 12.pdf PDF
Attachment D - Schedule B Price Proposal Form.pdf PDF
Attachment G - Representations and Certifications.pdf PDF
Attachment F_P1360 DWG_Part 8 of 12.pdf PDF
Attachment A - Pre-Proposal Inquiry Form.xlsx XLSX spreadsheet
Attachment B - Construction Experience Project Data Sheet.pdf PDF
Attachment F_P1360 DWG_Part 6 of 12.pdf PDF
Attachment F_P1360 DWG_Part 11 of 12.pdf PDF
Attachment E_P1360 SPECS_Part 5 of 5.pdf PDF
Attachment F_P1360 DWG_Part 4 of 12.pdf PDF
Attachment E_P1360 SPECS_Part 4 of 5.pdf PDF
Attachment F_P1360 DWG_Part 3 of 12.pdf PDF
Attachment F_P1360 DWG_Part 7 of 12.pdf PDF
Attachment F_P1360 DWG_Part 1 of 12.pdf PDF
Attachment F_P1360 DWG_Part 2 of 12.pdf PDF
Attachment C - Past Performance Questionnaire (PPQ).pdf PDF
Attachment F_P1360 DWG_Part 5 of 12.pdf PDF
Attachment F_P1360 DWG_Part 12 of 12.pdf PDF
Attachment E_P1360 SPECS_Part 1 of 5.pdf PDF
Show all 38

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

M-001

JO

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

MECHANICAL LEGEND GENERAL MECHANICAL NOTESMECHANICAL SYMBOLS

MECHANICAL ABBREVIATIONS

AutoCAD SHX Text

MECHANICAL GENERAL NOTES, SYMBOLS, AND LEGEND

AutoCAD SHX Text 14157176

AutoCAD SHX Text

AutoCAD SHX Text

OLS

AutoCAD SHX Text

OLS

AutoCAD SHX Text

FISH

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text

THERMOSTAT

AutoCAD SHX Text

SUPPLY DUCT, SUPPLY DUCT

AutoCAD SHX Text

RETURN DUCT, RETURN DUCT

AutoCAD SHX Text

DOWN/UP

AutoCAD SHX Text

DOWN/UP

AutoCAD SHX Text

CONDENSER WATER RETURN PIPING

AutoCAD SHX Text

CONDENSER WATER SUPPLY PIPING

AutoCAD SHX Text

DUAL TEMPERATUR SUPPLY PIPING

AutoCAD SHX Text

PIPING TO BE REMOVED

AutoCAD SHX Text

DUAL TEMPERATURE RETURN PIPING

AutoCAD SHX Text

CDR

AutoCAD SHX Text

CDS

AutoCAD SHX Text

DTS

AutoCAD SHX Text

DTR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

RL

AutoCAD SHX Text

HOT WATER RETURN PIPING

AutoCAD SHX Text

HOT WATER SUPPLY PIPING

AutoCAD SHX Text

CHILLED WATER RETURN PIPING

AutoCAD SHX Text

CWR

AutoCAD SHX Text

CHILLED WATER SUPPLY PIPING

AutoCAD SHX Text

CWS

AutoCAD SHX Text

DOMESTIC COLD WATER PIPING

AutoCAD SHX Text

REFRIGERANT LIQUID PIPING

AutoCAD SHX Text

LPS

AutoCAD SHX Text

HPS

AutoCAD SHX Text

LOW PRESSURE STEAM PIPING

AutoCAD SHX Text

HIGH PRESSURE STEAM PIPING

AutoCAD SHX Text

CONDENSATE DRAIN PIPING

AutoCAD SHX Text D

AutoCAD SHX Text

(NAME)

AutoCAD SHX Text

NATURAL GAS PIPING

AutoCAD SHX Text G

AutoCAD SHX Text

DCW

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LOW PRESSURE CONDENSATE PIPING

AutoCAD SHX Text

HUMIDITY SENSOR

AutoCAD SHX Text

AIR TERMINAL TAG WITH AIR FLOW (LPS)

AutoCAD SHX Text

RECTANGULAR DUCT DIMENSIONS (MILLIMETERS)

AutoCAD SHX Text

DOWNWARD DIRECTION OF SLOPED PIPING

AutoCAD SHX Text

COMPRESSED AIR PIPING

AutoCAD SHX Text A

AutoCAD SHX Text

VAC

AutoCAD SHX Text

VACUUM (AIR)

AutoCAD SHX Text

VACUUM BREAKER

AutoCAD SHX Text

AUTOMATIC AIR VENT

AutoCAD SHX Text

MANUAL AIR VENT

AutoCAD SHX Text

BACKFLOW PREVENTER

AutoCAD SHX Text

RELIEF VALVE

AutoCAD SHX Text

3-WAY CONTROL VALVE

AutoCAD SHX Text

2-WAY CONTROL VALVE

AutoCAD SHX Text

DRAIN VALVE WITH HOSE CONNECTION

AutoCAD SHX Text

SQUARE HEAD BALANCING COCK

AutoCAD SHX Text

PRESSURE REDUCING VALVE

AutoCAD SHX Text

AUTOMATIC FLOW BALANCING VALVE

AutoCAD SHX Text

MANUAL FLOW CONTROL BALANCING VALVE

AutoCAD SHX Text

CHECK VALVE

AutoCAD SHX Text

BUTTERFLY VALVE

AutoCAD SHX Text

GLOBE VALVE

AutoCAD SHX Text

GATE VALVE

AutoCAD SHX Text

CLEAN OUT

AutoCAD SHX Text

SPRINKLER HEAD

AutoCAD SHX Text

VALVE IN VERT. PIPING

AutoCAD SHX Text

WYE STRAINER

AutoCAD SHX Text

STRAINER W/ BLOWDOWN VALVE

AutoCAD SHX Text

ECCENTRIC REDUCER

AutoCAD SHX Text

PIPE REDUCER

AutoCAD SHX Text

UNION

AutoCAD SHX Text

THERMOMETER IN PIPE WELL

AutoCAD SHX Text

PRESSURE GAUGE W/ SHUTOFF COCK

AutoCAD SHX Text

PIPE CAP

AutoCAD SHX Text

FLANGE

AutoCAD SHX Text

FLEXIBLE PIPE CONNECTOR

AutoCAD SHX Text

ROUND DUCT DIMENSION (MILLIMETERS)

AutoCAD SHX Text

FLEXIBLE ROUND DUCT

AutoCAD SHX Text

RS

AutoCAD SHX Text

REFRIGERANT SUCTION PIPING

AutoCAD SHX Text

HG

AutoCAD SHX Text

HOT GAS BYPASS PIPING

AutoCAD SHX Text

ACCESS DOOR

AutoCAD SHX Text

AD

AutoCAD SHX Text

VOLUME DAMPER

AutoCAD SHX Text 300x250

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text C.O.

AutoCAD SHX Text 300%%C

AutoCAD SHX Text

DPS

AutoCAD SHX Text

HVAC EMERGENCY SHUTOFF SWITCH

AutoCAD SHX Text

STATIC PRESSURE SENSOR

AutoCAD SHX Text

DIFFERENTIAL PRESSURE SENSOR

AutoCAD SHX Text

SP

AutoCAD SHX Text E

AutoCAD SHX Text

RETURN/EXHAUST GRILLE

AutoCAD SHX Text

DUCTWORK WITH ACOUSTICAL LINING

AutoCAD SHX Text

FIRE DAMPER

AutoCAD SHX Text

FD

AutoCAD SHX Text

MOTORIZED DAMPER

AutoCAD SHX Text

MD

AutoCAD SHX Text

1. THESE GENERAL MECHANICAL NOTES APPLY TO THE ALL MECHANICAL DRAWINGS IN THIS SET. SHEET SPECIFIC NOTES ARE INDICATED ON EACH SHEET UNDER GENERAL SHEET NOTES. 2. PATCH ALL HOLES FROM REMOVAL OF PIPING, DUCTWORK, OR PATCH ALL HOLES FROM REMOVAL OF PIPING, DUCTWORK, OR EQUIPMENT TO MATCH ADJACENT CONSTRUCTION. 3. PROVIDE ALL MATERIALS AND EQUIPMENT AND PERFORM ALL PROVIDE ALL MATERIALS AND EQUIPMENT AND PERFORM ALL LABOR REQUIRED TO INSTALL COMPLETE AND OPERABLE MECHANICAL SYSTEMS AS INDICATED ON THE DRAWINGS, AS SPECIFIED AND AS REQUIRED BY CODE. 4. INSTALL ALL MECHANICAL EQUIPMENT AND APPURTENANCES IN INSTALL ALL MECHANICAL EQUIPMENT AND APPURTENANCES IN ACCORDANCE WITH MANUFACTURER'S RECOMMENDATIONS, THIS CONTRACT'S DOCUMENTS, AND APPLICABLE CODES AND REGULATIONS. 5. PROVIDE VIBRATION ISOLATORS FOR ALL MECHANICAL EQUIPMENT PROVIDE VIBRATION ISOLATORS FOR ALL MECHANICAL EQUIPMENT TO PREVENT TRANSMISSION OF VIBRATION TO BUILDING STRUCTURE. 6. PROVIDE ACCESS PANELS IN WALLS AND CEILINGS, WHERE PROVIDE ACCESS PANELS IN WALLS AND CEILINGS, WHERE REQUIRED, TO SERVE FIRE DAMPERS, VALVES, SMOKE DETECTORS, AND OTHER CONCEALED MECHANICAL EQUIPMENT THAT REQUIRES ROUTINE MAINTENANCE. ACCESS PANELS BE LARGE ENOUGH TO ALLOW PROPER CLEARANCE FOR ACCESS DOORS. 7. ALL OPENINGS IN FIRE WALLS DUE TO DUCTWORK, PIPING, ALL OPENINGS IN FIRE WALLS DUE TO DUCTWORK, PIPING, CONDUIT, ETC., SHALL BE FIRE STOPPED. 8. EXISTING DUCT AND PIPING SIZES INDICATED ARE APPROXIMATE. EXISTING DUCT AND PIPING SIZES INDICATED ARE APPROXIMATE. FIELD VERIFY ALL DIMENSIONS. 9. LOCATE ALL NEW HORIZONTAL DUCTWORK ABOVE THE SUSPENDED LOCATE ALL NEW HORIZONTAL DUCTWORK ABOVE THE SUSPENDED CEILINGS UNLESS OTHERWISE INDICATED. 10. ALL 90 DEGREE RECTANGULAR MITERED DUCT ELBOWS IN THE ALL 90 DEGREE RECTANGULAR MITERED DUCT ELBOWS IN THE SUPPLY AND RETURN DUCTS SHALL HAVE TURNING VANES. 11. PROVIDE PIPE SLEEVES FOR ALL PIPING PENETRATIONS THRU PROVIDE PIPE SLEEVES FOR ALL PIPING PENETRATIONS THRU WALLS AND FLOORS. EACH PIPE SHALL BE SEPARATELY SLEEVED. PROVIDE CONTINUOUS SEALANT JOINT AROUND PIPE SLEEVE, BOTH SIDES OF WALL, WATERTIGHT. 12. PROVIDE P-TRAPS IN CONDENSATE DRAIN PIPING AT EACH AHU PROVIDE P-TRAPS IN CONDENSATE DRAIN PIPING AT EACH AHU UNLESS THE AHU IS EQUIPPED WITH AN INTERNAL TRAP. 13. AFTER PRELIMINARY OPERATIONAL TESTING OF ALL BOILERS OR AFTER PRELIMINARY OPERATIONAL TESTING OF ALL BOILERS OR DIRECT FIRED DOMESTIC WATER HEATERS WITH A CAPACITY GREATER THAN 120 KILOWATTS, THE BOILER SHALL BE INSPECTED AND AN OPERATIONAL TEST SHALL BE PERFORMED BY A NAVFAC FACILITIES ENGINEERING COMMAND BOILER INSPECTOR. ALLOW 15 DAYS ADVANCE NOTICE FOR SCHEDULING AN INSPECTOR TO CONDUCT AN ACCEPTANCE OPERATIONAL TEST AND INSPECTION. 14. MOUNT THERMOSTATS 1.2 METERS ABOVE THE FINISHED FLOOR MOUNT THERMOSTATS 1.2 METERS ABOVE THE FINISHED FLOOR UNLESS OTHERWISE INDICATED. REFER TO ELECTRICAL DRAWINGS FOR LOCATION OF LIGHT SWITCHES AND COORDINATE. 15. AFTER THE PIPING IS INSULATED, PROVIDE PIPE LABELS, WITH AFTER THE PIPING IS INSULATED, PROVIDE PIPE LABELS, WITH DIRECTION OF FLOW ARROWS, ON THE FOLLOWING PIPING, AT 10 FOOT ON CENTER ON THE PIPING MAINS AND 1.5 METERS ON CENTER ON THE BRANCH RUNOUTS FROM MAINS.

AutoCAD SHX Text DIAMETER °DEGREES AD ACCESS DOOR ACCESS DOOR AFF ABOVE FINISHED FLOOR ABOVE FINISHED FLOOR AHU AIR HANDLING UNIT AIR HANDLING UNIT AP ACCESS PANEL ACCESS PANEL APD AIR PRESSURE DROP AIR PRESSURE DROP APPROX APPROXIMATELY APPROXIMATELY AS AIR SEPARATOR AIR SEPARATOR BF BELOW RAISED FLOOR BELOW RAISED FLOOR BT BUFFER TANK BUFFER TANK C COMMON/CELSIUS COMMON/CELSIUS CH AIR-COOLED CHILLER AIR-COOLED CHILLER CLG CEILING CEILING CRAC COMPUTER ROOM AIR HANDLING UNIT COMPUTER ROOM AIR HANDLING UNIT CU CONDENSING UNIT CONDENSING UNIT Cv LOSS COEFFICIENT LOSS COEFFICIENT CWP CHILLED WATER PUMP CHILLED WATER PUMP DB DRY BULB DRY BULB DDC DIRECT DIGITAL CONTROL DIRECT DIGITAL CONTROL DEG DEGREE DEGREE DIA DIAMETER DIAMETER DNXX NOMINAL PIPE SIZE NOMINAL PIPE SIZE DX DIRECT EXPANSION DIRECT EXPANSION EA EXAUST AIR EXAUST AIR EAT ENTERING AIR TEMPRATURE ENTERING AIR TEMPRATURE EER ENERGY EFFICIENCY RATIO ENERGY EFFICIENCY RATIO EF EXHAUST FAN EXHAUST FAN ESP EXTERNAL STATIC PRESSURE EXTERNAL STATIC PRESSURE ET EXPANSION TANK EXPANSION TANK EWT ENTERING WATER TEMPERATURE ENTERING WATER TEMPERATURE FLA FULL LOAD AMPS FULL LOAD AMPS HGT HEIGHT HEIGHT HW HOT WATER HOT WATER IPLV INTEGRATED PART LOAD VALUE INTEGRATED PART LOAD VALUE KG KILOGRAM KILOGRAM kPA KILOPASCAL KILOPASCAL kW KILOWATT KILOWATT L LOUVER LOUVER LAT LEAVING AIR TEMPERATURE LEAVING AIR TEMPERATURE LPS LITERS PER SECOND LITERS PER SECOND LWT LEAVING WATER TEMPERATURE LEAVING WATER TEMPERATURE M METER METER MAX MAXIMUM MAXIMUM MCA MINIMUM CIRCUIT AMPS MINIMUM CIRCUIT AMPS MERV MINIMUM EFFICIENCY REPORTING VALUE MINIMUM EFFICIENCY REPORTING VALUE MFS MAXIMUM FUSE SIZE MAXIMUM FUSE SIZE MIN MINIMUM MINIMUM mm MILLIMETER MILLIMETER MOCP MAXIMUM OVER CURRENT PROTECTION MAXIMUM OVER CURRENT PROTECTION MPS METERS PER SECOND METERS PER SECOND NC NOISE CRITERIA/NORMALLY CLOSED NOISE CRITERIA/NORMALLY CLOSED NO NUMBER/NORMALLY OPEN NUMBER/NORMALLY OPEN OA OUTSIDE AIR OUTSIDE AIR PA PASCAL PASCAL PD PRESSURE DROP PRESSURE DROP PH PHASE PHASE RA RETURN AIR RETURN AIR RAD RADIUS RADIUS REF REFRIGERANT REFRIGERANT RPM REVOLUTIONS PER MINUTE REVOLUTIONS PER MINUTE RS REFRIGERANT SUCTION REFRIGERANT SUCTION SA SUPPLY AIR SUPPLY AIR SEER SEASONAL ENERGY EFFICIENCY RATING SEASONAL ENERGY EFFICIENCY RATING SP STATIC PRESSURE STATIC PRESSURE SQ SQUARE SQUARE SSIU DUCTLESS SPLIT SYSTEM INDOOR UNIT DUCTLESS SPLIT SYSTEM INDOOR UNIT SSOU DUCTLESS SPLIT-SYSTEM HEAT PUMP OUTDOOR UNIT DUCTLESS SPLIT-SYSTEM HEAT PUMP OUTDOOR UNIT TYP TYPICAL TYPICAL UL UNDERWRITERS LABORATORY UNDERWRITERS LABORATORY UON UNLESS OTHERWISE NOTED UNLESS OTHERWISE NOTED V VOLTS VOLTS VAV VARIABLE AIR VOLUME VARIABLE AIR VOLUME VFD VARIABLE FREQUENCY DRIVE VARIABLE FREQUENCY DRIVE WB WET BULB WET BULB WPD WATER PRESSURE DROP WATER PRESSURE DROP

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

HGD

AutoCAD SHX Text

HYDROGEN GAS DETECTION SENSOR

AutoCAD SHX Text

CAV

AutoCAD SHX Text

CLEAN AGENT VENTILATION SWITCH

GRAPHIC SCALE

M-101

A1 FLOOR PLAN - MECHANICAL HVAC

GENERAL NOTES

SHEET KEYNOTES

JO

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

AutoCAD SHX Text 10000mm

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 1:100

AutoCAD SHX Text

FLOOR PLAN - MECHANICAL HVAC

AutoCAD SHX Text 14157177

AutoCAD SHX Text

AutoCAD SHX Text

JAK

AutoCAD SHX Text

JAK

AutoCAD SHX Text

FISH

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text 1:100

AutoCAD SHX Text

1. REFER TO ARCHITECTURAL DRAWINGS FOR EXACT LOCATION OF REFER TO ARCHITECTURAL DRAWINGS FOR EXACT LOCATION OF LOUVERS ABOVE GRADE/FINISHED FLOOR. 2. REFER TO SHEET M-001 LEGEND, GENERAL NOTES, AND REFER TO SHEET M-001 LEGEND, GENERAL NOTES, AND ABBREVIATIONS. 3. SUPPLY AND RETURN DUCT RUN OUT DIMENSIONS SHALL MATCH SUPPLY AND RETURN DUCT RUN OUT DIMENSIONS SHALL MATCH DIFFUSER AND GRILLE NECK DIMENSIONS UNLESS OTHERWISE INDICATED. 4. INSULATE DOAS DUCTWORK IN ACCORDANCE WITH SPECIFICATIONS. INSULATE DOAS DUCTWORK IN ACCORDANCE WITH SPECIFICATIONS. 5. PROVIDE MANUAL BALANCING DAMPERS ON ALL BRANCH DUCT PROVIDE MANUAL BALANCING DAMPERS ON ALL BRANCH DUCT RUNS. 6. PROVIDE MITERED ELBOWS WHERE SPATIAL CONSTRAINTS DO NOT PROVIDE MITERED ELBOWS WHERE SPATIAL CONSTRAINTS DO NOT ALLOW FOR SMOOTH RADIUS ELBOWS. 7. ALL INTERIOR DUCTWORK TO BE PROVIDED WITH 50MM OF ALL INTERIOR DUCTWORK TO BE PROVIDED WITH 50MM OF INSULATION IN ALL DIRECTIONS.

AutoCAD SHX Text

1. BALANCE 80 LPS OF OUTDOOR AIR FROM DOAS-1 TO RETURN OF BALANCE 80 LPS OF OUTDOOR AIR FROM DOAS-1 TO RETURN OF FCU-1 2. FLOOR-MOUNTED COMPUTER ROOM AIR HANDLING UNIT. FLOOR-MOUNTED COMPUTER ROOM AIR HANDLING UNIT. 3. CLEAN AGENT VENTILATION SWITCH CLEAN AGENT VENTILATION SWITCH 4. WALL-MOUNTED DUCTLESS SPLIT SYSTEM INDOOR UNIT. WALL-MOUNTED DUCTLESS SPLIT SYSTEM INDOOR UNIT. 5. WALL-MOUNTED DUCTLESS SPLIT SYSTEM OUTDOOR UNIT. WALL-MOUNTED DUCTLESS SPLIT SYSTEM OUTDOOR UNIT. 6. CLEARANCE REQUIRED FOR MAINTENANCE, TYPICAL. CLEARANCE REQUIRED FOR MAINTENANCE, TYPICAL. 7. HYDROGEN DETECTION SYSTEM. HYDROGEN DETECTION SYSTEM. 8. BALANCE 40 LPS OF OUTDOOR AIR FROM DOAS-1 TO RETURN OF BALANCE 40 LPS OF OUTDOOR AIR FROM DOAS-1 TO RETURN OF FCU-2. 9. 150 WIDE FLEXIBLE DUCT CONNECTOR, TYP. 150 WIDE FLEXIBLE DUCT CONNECTOR, TYP. 10. TRANSITION DUCT FROM FULL SIZE OF GENERATOR DISCHARGE TO TRANSITION DUCT FROM FULL SIZE OF GENERATOR DISCHARGE TO FULL SIZE OF EXHAUST LOUVER OPENING, TYP. 11. FULL SIZED CONTROL DAMPER, MOTORIZED (LOW VOLTAGE), FULL SIZED CONTROL DAMPER, MOTORIZED (LOW VOLTAGE), THERMALLY INSULATED, LOW LEAKAGE, WITH FLANGE FOR WALL-MOUNTING. EQUIP WITH FAST ACTING ACTUATOR WITH NEMA 3 ENCLOSURE. 12. BOTTOM OF DUCT 2950 mm ABOVE FINISHED FLOOR. BOTTOM OF DUCT 2950 mm ABOVE FINISHED FLOOR. 13. ACCESS DOOR, TYPICAL ACCESS DOOR, TYPICAL 14. EXHAUST FAN AND DUCTWORK ARE MOUNTED BELOW DROP CEILING. EXHAUST FAN AND DUCTWORK ARE MOUNTED BELOW DROP CEILING. 15. BALANCE 40 LPS OF OUTDOOR AIR FROM DOAS-1 TO RETURN OF BALANCE 40 LPS OF OUTDOOR AIR FROM DOAS-1 TO RETURN OF FCU-3. 16. POWER GENERATOR SILENCER, CRITICAL GRADE, BOTTOM INLET, END POWER GENERATOR SILENCER, CRITICAL GRADE, BOTTOM INLET, END OUTLET. PROVIDE FLEXIBLE CONNECTOR AT GENERATOR. 17. PRE-MANUFACTURED WALL THIMBLE, DESIGNED IN ACCORDANCE PRE-MANUFACTURED WALL THIMBLE, DESIGNED IN ACCORDANCE WITH NFPA, TO PROTECT WALL FROM EXHAUST PIPE HEAT. 18. PRE-MANUFACTURED EXHAUST PIPE WITH OPEN 45 DEGREE PRE-MANUFACTURED EXHAUST PIPE WITH OPEN 45 DEGREE OPENING PROTECTED WITH EXPANDED METAL BIRDSCREEN. OPEN MUST FACE DOWN TOWARD GRADE. 19. RADON FANS ABOVE CEILING. SEE PLUMBING FOR RADON PIPING. RADON FANS ABOVE CEILING. SEE PLUMBING FOR RADON PIPING. 20. SMOKE/FIRE DAMPER SMOKE/FIRE DAMPER 21. 2 HOUR FIRE DAMPER 2 HOUR FIRE DAMPER 22. 3 HOUR FIRE DAMPER 3 HOUR FIRE DAMPER

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text 1200x600

AutoCAD SHX Text 1200x600

AutoCAD SHX Text T1

AutoCAD SHX Text

AutoCAD SHX Text T1

AutoCAD SHX Text

AutoCAD SHX Text

%%UCRAC-1

AutoCAD SHX Text

%%UCRAC-2

AutoCAD SHX Text

%%UCRAC-4

AutoCAD SHX Text

%%UCRAC-3

AutoCAD SHX Text

%%UDDOU-1

AutoCAD SHX Text

%%UDDIU-1

AutoCAD SHX Text

%%UFCU-3

AutoCAD SHX Text

%%UFCU-1

AutoCAD SHX Text

%%UFCU-2

AutoCAD SHX Text

%%UFCU-4

AutoCAD SHX Text

%%UFCU-5

AutoCAD SHX Text

%%UFCU-7

AutoCAD SHX Text

%%UFCU-6

AutoCAD SHX Text M-401

AutoCAD SHX Text C1

AutoCAD SHX Text M-403

AutoCAD SHX Text C3

AutoCAD SHX Text M-403

AutoCAD SHX Text A1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S7

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S7

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R3

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R3

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R8

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R7

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R5

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R9

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R6

AutoCAD SHX Text

%%UEF-2

AutoCAD SHX Text

%%UEF-1

AutoCAD SHX Text

%%UL-7

AutoCAD SHX Text

%%UL-7

AutoCAD SHX Text

%%UEF-3

AutoCAD SHX Text

%%UEF-4

AutoCAD SHX Text

%%UL-3

AutoCAD SHX Text

%%UL-3

AutoCAD SHX Text 150x150

AutoCAD SHX Text 450x450

AutoCAD SHX Text 150x200

AutoCAD SHX Text 150x150

AutoCAD SHX Text 150x150

AutoCAD SHX Text 250x200

AutoCAD SHX Text 150x150

AutoCAD SHX Text 150x150

AutoCAD SHX Text

AutoCAD SHX Text 150x150

AutoCAD SHX Text 250x350

AutoCAD SHX Text 200x200

AutoCAD SHX Text 250x300

AutoCAD SHX Text 400x250

AutoCAD SHX Text 250x350

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 200x250

AutoCAD SHX Text 200x200

AutoCAD SHX Text 200x200

AutoCAD SHX Text 250x300

AutoCAD SHX Text 150x150

AutoCAD SHX Text 250x250

AutoCAD SHX Text 200x200

AutoCAD SHX Text 200x200

AutoCAD SHX Text 300x300

AutoCAD SHX Text 150x150

AutoCAD SHX Text 300x350

AutoCAD SHX Text 400x400

AutoCAD SHX Text 450x450

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 250x300

AutoCAD SHX Text 250x300

AutoCAD SHX Text 150x150

AutoCAD SHX Text

AutoCAD SHX Text 150x200

AutoCAD SHX Text 150x150

AutoCAD SHX Text 150x150

AutoCAD SHX Text

AutoCAD SHX Text 150x150

AutoCAD SHX Text 150x150

AutoCAD SHX Text 250x250

AutoCAD SHX Text 150x150

AutoCAD SHX Text 200x250

AutoCAD SHX Text 200x200

AutoCAD SHX Text 200x200

AutoCAD SHX Text 150x200

AutoCAD SHX Text 300x300

AutoCAD SHX Text 150x150

AutoCAD SHX Text 350x450

AutoCAD SHX Text 350x350

AutoCAD SHX Text 350x300

AutoCAD SHX Text 250x200

AutoCAD SHX Text 350x350

AutoCAD SHX Text 350x450

AutoCAD SHX Text M-401

AutoCAD SHX Text A1

AutoCAD SHX Text

%%UL-1

AutoCAD SHX Text

%%UL-1

AutoCAD SHX Text

%%UL-4

AutoCAD SHX Text

%%UL-4

AutoCAD SHX Text

%%UL-2

AutoCAD SHX Text T

AutoCAD SHX Text

EF-2

AutoCAD SHX Text T

AutoCAD SHX Text T

AutoCAD SHX Text

FCU-3

AutoCAD SHX Text T

AutoCAD SHX Text

FCU-1

AutoCAD SHX Text T

AutoCAD SHX Text

FCU-8

AutoCAD SHX Text T

AutoCAD SHX Text

DOAS-1

AutoCAD SHX Text T

AutoCAD SHX Text

EF-1

AutoCAD SHX Text

HGD

AutoCAD SHX Text

HGD

AutoCAD SHX Text

CAV

AutoCAD SHX Text T

AutoCAD SHX Text T

AutoCAD SHX Text

DSSIU-1

AutoCAD SHX Text 150x150

AutoCAD SHX Text 200x200

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S6

AutoCAD SHX Text

AutoCAD SHX Text

EF-7

AutoCAD SHX Text

AutoCAD SHX Text

EF-5

AutoCAD SHX Text

AutoCAD SHX Text

EF-6

AutoCAD SHX Text

EF-8

M-102

JO

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

A1 FLOOR PLAN - MECHANICAL PIPING

GENERAL NOTES

GRAPHIC SCALE

SHEET KEYNOTES

AutoCAD SHX Text 10000mm

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 1:100

AutoCAD SHX Text

FLOOR PLAN - MECHANICAL PIPING

AutoCAD SHX Text 14157178

AutoCAD SHX Text

AutoCAD SHX Text

RER

AutoCAD SHX Text

RER

AutoCAD SHX Text

FISH

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text 1:100

AutoCAD SHX Text

1. NOT USED NOT USED 2. CHILLED WATER PIPING BELOW RAISED FLOOR IN THIS SPACE. CHILLED WATER PIPING BELOW RAISED FLOOR IN THIS SPACE. 3. UNDERGROUND CHILLED WATER PIPING. UNDERGROUND CHILLED WATER PIPING. 4. PIPE COOLING COIL CONDENSATE TO NEAREST FLOOR DRAIN. PIPE COOLING COIL CONDENSATE TO NEAREST FLOOR DRAIN. 5. PIPE COOLING COIL CONDENSATE TO FLOOR SINK BELOW.PIPE COOLING COIL CONDENSATE TO FLOOR SINK BELOW.

AutoCAD SHX Text

1. REFER TO SHEET M-001 LEGEND, GENERAL NOTES, AND REFER TO SHEET M-001 LEGEND, GENERAL NOTES, AND ABBREVIATIONS.

AutoCAD SHX Text

%%UCRAC-1

AutoCAD SHX Text

%%UCRAC-2

AutoCAD SHX Text

%%UCRAC-4

AutoCAD SHX Text

%%UCRAC-3

AutoCAD SHX Text

%%UEUH-3

AutoCAD SHX Text M

AutoCAD SHX Text M

AutoCAD SHX Text M

AutoCAD SHX Text M

AutoCAD SHX Text

%%UACCH-1

AutoCAD SHX Text

%%UACCH-2

AutoCAD SHX Text

%%UACCH-3

AutoCAD SHX Text

%%UEUH-2

AutoCAD SHX Text

%%UEUH-1

AutoCAD SHX Text

%%UEUH-4

AutoCAD SHX Text

%%UEUH-5

AutoCAD SHX Text

%%UEUH-6

AutoCAD SHX Text

%%UEUH-7

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

%%UEUH-10

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

50 CHWS & R

AutoCAD SHX Text

20 COND

AutoCAD SHX Text

25 CHWS & R

AutoCAD SHX Text

25 CHWS & R

AutoCAD SHX Text

20 COND

AutoCAD SHX Text

65 CHWS & R

AutoCAD SHX Text

50 CHWS & R

AutoCAD SHX Text

65 CHWS & R

AutoCAD SHX Text

100 CHWS & R

AutoCAD SHX Text

32 CHWS & R

AutoCAD SHX Text

20 COND

AutoCAD SHX Text

25 COND

AutoCAD SHX Text

25 CHWS & R

AutoCAD SHX Text

20 COND

AutoCAD SHX Text

100 CHWS & R

AutoCAD SHX Text

80 CHWS & R

AutoCAD SHX Text

(TYP. FOR 3)

AutoCAD SHX Text

SERVICE CLEARANCE

AutoCAD SHX Text

150 CONCRETE PAD

AutoCAD SHX Text

15 CHWS & R

AutoCAD SHX Text

%%UFCU-3

AutoCAD SHX Text

%%UFCU-1

AutoCAD SHX Text

%%UFCU-2

AutoCAD SHX Text

%%UFCU-4

AutoCAD SHX Text

%%UFCU-5

AutoCAD SHX Text

%%UFCU-7

AutoCAD SHX Text

%%UFCU-6

AutoCAD SHX Text

AutoCAD SHX Text

20 COND

AutoCAD SHX Text

20 COND

AutoCAD SHX Text

AutoCAD SHX Text A2

AutoCAD SHX Text M-402

AutoCAD SHX Text

100 CHWS & R

AutoCAD SHX Text

100 CHWS & R

AutoCAD SHX Text

10 CHWS & R

AutoCAD SHX Text

32 CHW BYPASS

AutoCAD SHX Text

DPS

%%UEUH-11

M-401

JO

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

A1 ENLARGED FLOOR PLAN - MECHANICAL ROOM DUCTWORK

SHEET KEYNOTES

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 5000mm

AutoCAD SHX Text 1:50

AutoCAD SHX Text

AutoCAD SHX Text

ENLARGED FLOOR PLAN - MECHANICAL ROOM DUCTWORK

AutoCAD SHX Text 14157179

AutoCAD SHX Text

AutoCAD SHX Text

JAK

AutoCAD SHX Text

JAK

AutoCAD SHX Text

OSA

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text 1:50

AutoCAD SHX Text

1. EQUIPMENT CLEARANCE REQUIRED FOR MAINTENANCE. EQUIPMENT CLEARANCE REQUIRED FOR MAINTENANCE. 2. 100% DEDICATED OUTDOOR AIR SYSTEM. 100% DEDICATED OUTDOOR AIR SYSTEM. 3. DUCT TURN UP. SEE SHEET M-403 SECTION C1 FOR DUCT TURN UP. SEE SHEET M-403 SECTION C1 FOR CLARIFICATION.

AutoCAD SHX Text

%%UL-6

AutoCAD SHX Text

%%UL-5

AutoCAD SHX Text

%%UFCU-8

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text R4

AutoCAD SHX Text 250x250

AutoCAD SHX Text 200x200

AutoCAD SHX Text 150x150

AutoCAD SHX Text 150x150

AutoCAD SHX Text 250x200

AutoCAD SHX Text 450x450

AutoCAD SHX Text 400x550

AutoCAD SHX Text

%%UDOAS-1

AutoCAD SHX Text 400x550

AutoCAD SHX Text 300x250

AutoCAD SHX Text 250x200

AutoCAD SHX Text T

AutoCAD SHX Text

FCU-8

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text S4

M-402

JO

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

A2 ENLARGED FLOOR PLAN - MECHANICAL ROOM PIPING

SHEET KEYNOTES

GENERAL NOTES

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 5000mm

AutoCAD SHX Text 1:50

AutoCAD SHX Text

AutoCAD SHX Text

ENLARGED FLOOR PLAN - MECHANICAL ROOM PIPING

AutoCAD SHX Text 14157180

AutoCAD SHX Text

AutoCAD SHX Text

RER

AutoCAD SHX Text

RER

AutoCAD SHX Text

FISH

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text 1:50

AutoCAD SHX Text

1. PIPE COOLING COIL CONDENSATE TO NEAREST FLOOR DRAIN. PIPE COOLING COIL CONDENSATE TO NEAREST FLOOR DRAIN. 2. PROPYLENE GLYCOL TANK AND PUMPING SYSTEM. PROPYLENE GLYCOL TANK AND PUMPING SYSTEM. 3. CHEMICAL SHOT FEEDER. CHEMICAL SHOT FEEDER. 4. CONTINUES TO SHEET M-102 CONTINUES TO SHEET M-102 5. DOMESTIC COLD WATER MAKEUP. SEE PLUMBING SHEETS FOR DOMESTIC COLD WATER MAKEUP. SEE PLUMBING SHEETS FOR CONTINUATION

AutoCAD SHX Text

1. REFER TO SHEET M-001 LEGEND, GENERAL NOTES, AND REFER TO SHEET M-001 LEGEND, GENERAL NOTES, AND ABBREVIATIONS.

AutoCAD SHX Text

AutoCAD SHX Text

%%UDOAS-1

AutoCAD SHX Text

%%UCHWP-1&2

AutoCAD SHX Text

%%UET-1

AutoCAD SHX Text

%%UAS-1

AutoCAD SHX Text

%%UEUH-8

AutoCAD SHX Text

%%UEUH-9

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

%%UBT-1

AutoCAD SHX Text

20 COND

AutoCAD SHX Text

20 CHWS & R

AutoCAD SHX Text

100 CHWS & R

AutoCAD SHX Text

25 CHWS & R

AutoCAD SHX Text

%%UFCU-8

AutoCAD SHX Text

AutoCAD SHX Text

25 COND

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

100 CHWS & R

AutoCAD SHX Text

20 CHWS & R

AutoCAD SHX Text

20 DCW

M-403

JO

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

C1 MECHANICAL ROOM SECTION C3 MECHANICAL SECTION

A1 MECHANICAL SECTION

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 5000mm

AutoCAD SHX Text 1:50

AutoCAD SHX Text

AutoCAD SHX Text

MECHANICAL SECTION PLANS

AutoCAD SHX Text 14157181

AutoCAD SHX Text

AutoCAD SHX Text

JAK

AutoCAD SHX Text

JAK

AutoCAD SHX Text

OSA

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text 1:50

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text 1:50

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text 1:50

AutoCAD SHX Text 250x250

AutoCAD SHX Text

FCU-8

AutoCAD SHX Text 400x400

AutoCAD SHX Text 400x45000x450

AutoCAD SHX Text 400x50000x500

AutoCAD SHX Text

DOAS-1

AutoCAD SHX Text 150x1500x150

AutoCAD SHX Text 200x200

AutoCAD SHX Text 400x50000x500

AutoCAD SHX Text 400x55000x550

AutoCAD SHX Text 150x200

AutoCAD SHX Text 250x200

AutoCAD SHX Text 350x250

AutoCAD SHX Text 150x200

AutoCAD SHX Text 150x150

AutoCAD SHX Text 150x150

AutoCAD SHX Text 250x350

AutoCAD SHX Text 350x350

AutoCAD SHX Text 200x200

AutoCAD SHX Text 150x150

AutoCAD SHX Text 200x200

AutoCAD SHX Text 350x400

AutoCAD SHX Text 150x200

AutoCAD SHX Text 150x200

AutoCAD SHX Text

FCU-1

AutoCAD SHX Text

FCU-2

AutoCAD SHX Text 150x150

AutoCAD SHX Text 200x200

AutoCAD SHX Text

AutoCAD SHX Text 200x200

AutoCAD SHX Text 300x250

AutoCAD SHX Text 400x250

AutoCAD SHX Text

FCU-5

AutoCAD SHX Text 200x200

150x150

M-501

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

A2 DUCTLESS SPLIT SYSTEM PIPING DETAIL A4 HEAT TRACING INSTALLATION DETAIL

INSTALLATION AT VALVESINSTALLATION DETAIL

SECTION THRU PIPE HEAT TRACE CONTROL BOX DIAGRAM

A1 LOUVER INSTALLATION DETAIL

C2 WALL PIPE SLEEVE - INTERIOR DETAILC1 CONDENSATE P-TRAP PIPING DETAIL C4 CABINET CEILING FAN DETAIL

AutoCAD SHX Text

MECHANICAL DETAILS

AutoCAD SHX Text 14157182

AutoCAD SHX Text

AutoCAD SHX Text

OLS

AutoCAD SHX Text

OLS

AutoCAD SHX Text

FISH

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text

SA

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text

N0TES:

AutoCAD SHX Text

1. MOUNT BOTTOM OF WALL-MOUNTED INDOOR UNIT 2.5 METERS AFF.MOUNT BOTTOM OF WALL-MOUNTED INDOOR UNIT 2.5 METERS AFF.

AutoCAD SHX Text

%%UAIRFLOW

AutoCAD SHX Text

AutoCAD SHX Text

N0TES:

AutoCAD SHX Text

1. PROVIDE WEATHER RESISTANT LABELING ON EXTERIOR OF JACKET IDENTIFYING PIPES AS PROVIDE WEATHER RESISTANT LABELING ON EXTERIOR OF JACKET IDENTIFYING PIPES AS BEING "ELECTRIC TRACED" WITH VOLTAGE INDICATED.

AutoCAD SHX Text

ALUMINUM FOIL TAPE AND INSULATION NOT SHOWN.

AutoCAD SHX Text

VALVE

AutoCAD SHX Text

SELF REGULATING TYPE HEAT TRACE CABLE

AutoCAD SHX Text

ALUMINUM FOIL TAPE AND INSULATION NOT SHOWN.

AutoCAD SHX Text

HOT-COLD JOINT

AutoCAD SHX Text

PIPE STRAPS

AutoCAD SHX Text

SELF REGULATING TYPE HEAT TRACE CABLE

AutoCAD SHX Text

ALUMINUM FOIL TAPE

AutoCAD SHX Text

PIPE INSULATION

AutoCAD SHX Text PIPE STRAPS AT APPROX. 460mm INTERVALS

AutoCAD SHX Text

WATERPROOF JACKET OVER INSULATION

AutoCAD SHX Text

HEAT TRACE CABLE

AutoCAD SHX Text

JUNCTION BOX

AutoCAD SHX Text ELECTRONIC THERMOSTAT WITH ADJUSTABLE THERMOSTAT SET AT 4°C,LED INDICATORS FOR ALARM, POWER AND HEATING CABLE STATUS

AutoCAD SHX Text

AMBIENT AIR SENSOR WITH SUN SHIELD

AutoCAD SHX Text

TO POWER SUPPLY DISCONNECT SWITCH

AutoCAD SHX Text

ILUMINATED END SEAL

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-101

AutoCAD SHX Text

%%UEXTERIOR

AutoCAD SHX Text

%%UINTERIOR

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text

1. REFER TO FIRE PROTECTION SPECIFICATIONS FOR FIRE STOPPING SYSTEM REFER TO FIRE PROTECTION SPECIFICATIONS FOR FIRE STOPPING SYSTEM REQUIREMENTS WHERE PIPE PENETRATES RATED WALL OR PARTITION. 2. PROVIDE APPROXIMATELY 13 GAP BETWEEN INSULATION AND METAL PIPE SLEEVE. PROVIDE APPROXIMATELY 13 GAP BETWEEN INSULATION AND METAL PIPE SLEEVE. 3. SUPPORT PIPE ON BOTH SIDES OF WALL. CONTACT WITH SLEEVE, WALL OR SUPPORT PIPE ON BOTH SIDES OF WALL. CONTACT WITH SLEEVE, WALL OR FRAMING IS NOT ALLOWED.

AutoCAD SHX Text

N0TES:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text H x 15MM

AutoCAD SHX Text

TOTAL TRAP HEIGHT = X + H + (1.5 X PIPE DIAMETER)

AutoCAD SHX Text H

AutoCAD SHX Text X

AutoCAD SHX Text

SEALANT

AutoCAD SHX Text

MINERAL FIBER PACKING

AutoCAD SHX Text

PIPE

AutoCAD SHX Text

INSULATION

AutoCAD SHX Text

FIRE STOPPING WHERE APPLICABLE

AutoCAD SHX Text

ESCUTCHEON PLATE WHERE PIPE IS EXPOSED

AutoCAD SHX Text

METAL PIPE SLEEVE

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-101

AutoCAD SHX Text

METAL FACE GRILLE FURNISHED WITH FAN

AutoCAD SHX Text

1. MAINTAIN MANUFACTURER'S RECOMMENDED SERVICE CLEARANCES. MAINTAIN MANUFACTURER'S RECOMMENDED SERVICE CLEARANCES. 2. SUPPORT EQUIPMENT TO THE STRUCTURE.SUPPORT EQUIPMENT TO THE STRUCTURE.

AutoCAD SHX Text

N0TES:

AutoCAD SHX Text

DUCTWORK. SEE PLANS FOR SIZE AND CONTINUATION.

AutoCAD SHX Text

BACKDRAFT DAMPER.

AutoCAD SHX Text

ACOUSTIC LINING

AutoCAD SHX Text

DRAIN PAN

AutoCAD SHX Text

CLEANOUT

AutoCAD SHX Text

CLEANOUT

AutoCAD SHX Text

PITCH DOWN TOWARD DRAIN

AutoCAD SHX Text

ROUTE TO NEAREST FLOOR DRAIN

AutoCAD SHX Text

25MM PLUS CASING PRESSURE

AutoCAD SHX Text

DRAIN LINE SHALL BE AT LEAST THE SAME SIZE AS UNIT CONNECTION SIZE

AutoCAD SHX Text

EXTERIOR WALL

AutoCAD SHX Text

LOUVER, WIND DRIVEN RAIN TYPE

AutoCAD SHX Text

REFER TO ARCHITECTURAL DRAWINGS FOR FLASHING DETAILS

AutoCAD SHX Text

LOW LEAKAGE DAMPER, MOTORIZED, FULL SIZE OF LOUVER.

AutoCAD SHX Text

DUCTWORK, FULL SIZE OF LOUVER

AutoCAD SHX Text

MOUNT ELECTRIC ACTUATOR(S) ON SIDE(S).

AutoCAD SHX Text PROVIDE DAMPER WITH REVERSE FLANGE OR PROVIDE ANGLES TO SECURE AS RECOMMENDED BY THE MANUFACTURER.

AutoCAD SHX Text

WALL MOUNTING BRACKET FURNISHED BY FCU MFGR.

AutoCAD SHX Text

WALL-MOUNTED TYPE INDOOR UNIT AHU

AutoCAD SHX Text

24V LEAD TO WALL-MTD THERMOSTAT, PROVIDED BY UNIT MANUFACTURER

AutoCAD SHX Text

PIPE SLEEVE

AutoCAD SHX Text

POWER & HIGH VOLTAGE CONTROL TO INDOOR UNIT

AutoCAD SHX Text

INSULATED CONDENSATE DRAIN PIPING. REFER TO FLOOR PLANS FOR PIPING CONTINUATION

AutoCAD SHX Text

INSULATED REFRIGERANT LINESET. REFER TO FLOOR PLANS FOR PIPING CONTINUATION

AutoCAD SHX Text

CONCRETE PAD. REFER TO CIVIL DRAWINGS FOR ADDITIONAL INFORMATION

AutoCAD SHX Text

SECURE OUTDOOR CONDENSING UNIT TO CONCRETE PAD OR EQUIPMENT ROOF CURB

25X25 STAINLESS MESH FULL SIZE OF LOUVER

M-502

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

C1 PIPE SUPPORT DETAIL

A1 BASE MOUNTED CENTRIFUGAL PUMP PIPING DETAIL A2 AIR COOLED CHILLER PIPING DETAIL A4 PIPE WALL PENETRATION ABOVE GRADE DETAIL

C2 CHEMICAL SHOT FEEDER PIPING DETAIL C4 FAN COIL UNIT INSTALATION DETAIL

AutoCAD SHX Text

MECHANICAL DETAILS

AutoCAD SHX Text 14157183

AutoCAD SHX Text

AutoCAD SHX Text

OLS

AutoCAD SHX Text

OLS

AutoCAD SHX Text

FISH

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text

SET TO UNIT CONNECTION HEIGHT ABOVE GRADE

AutoCAD SHX Text

150 X 150 X 6 POST PLATE

AutoCAD SHX Text

6-16X 70 ANCHOR BOLT TYPICAL OF 4

AutoCAD SHX Text

UNIVERSAL SHELF BRACKET

AutoCAD SHX Text

COMBINATION CHANNEL, LENGTH AS REQUIRED

AutoCAD SHX Text

PIPE CLAMP, TYP.

AutoCAD SHX Text

PIPE WITH INSULATION, TYP.

AutoCAD SHX Text

INSULATION SHIELD, TYP.

AutoCAD SHX Text

1. CHANNELS, HANGERS, FRAMES, THREADED RODS, WASHERS, AND NUTS AND ALL CHANNELS, HANGERS, FRAMES, THREADED RODS, WASHERS, AND NUTS AND ALL ASSOCIATED APPURTENANCES SHALL BE HOT DIPPED GALVANIZED STEEL. 2. PRE-MANUFACTURED PIPE SUPPORT. PRE-MANUFACTURED PIPE SUPPORT.

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

* STRAIGHT LENGTHS OF UNOBSTRUCTED PIPE WITHOUT INLINE APPURTENANCES SHALL BE INSTALLED UP/DOWNSTREAM OF FLOW CONTROL BALANCING VALVE A MINIMUM OF EIGHT PIPE DIAMETER OR PER MANUFACTURER'S INSTALLATION INSTRUCTIONS, WHICHEVER IS LONGEST.

AutoCAD SHX Text

CONCRETE INERTIA BASE

AutoCAD SHX Text

MOTOR

AutoCAD SHX Text

PUMP

AutoCAD SHX Text

COUPLING GUARD

AutoCAD SHX Text

PRESSURE GAGE WITH SERVICE COCK 0-415 KPA

AutoCAD SHX Text

DN25 DRAIN VALVE W/ HOSE CONNECTION

AutoCAD SHX Text BALL VALVE FOR PIPE DN50 AND LESS. BUTTERFLY VALVE FOR PIPE DN65 AND GREATER (TYP)

AutoCAD SHX Text

PRESSURE/TEMPERATURE PORT. EXTEND PIPE BEYOND INSULATION

AutoCAD SHX Text

GLOBE OR NEEDLE VALVE (TYP)

AutoCAD SHX Text

DN6

AutoCAD SHX Text

SUCTION DIFFUSER

AutoCAD SHX Text

SUPPORT

AutoCAD SHX Text

FLOOR

AutoCAD SHX Text

FLOOR FLANGE

AutoCAD SHX Text

SEISMIC SPRING ISOLATOR (TYP. OF 4)

AutoCAD SHX Text DOWL CONCRETE EQUIPMENT PAD TO THE STRUCTURE. HEIGHT MUST ACCOMMODATE SEISMIC ANCHORAGE BUT NOT BE LESS THAN 100. REFER TO STRUCTURAL DRAWINGS FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

MANUAL FLOW CONTROL BALANCING VALVE

AutoCAD SHX Text

FLEXIBLE PIPE CONNECTOR

AutoCAD SHX Text

LIFT CHECK VALVE

AutoCAD SHX Text 1.2M

AutoCAD SHX Text

DN20

AutoCAD SHX Text

DN20

AutoCAD SHX Text

FS

AutoCAD SHX Text NOTE: PROVIDE HEAT TRACE ON ALL EXTERIOR ABOVE GRADE PIPING. REFER TO DETAIL A4/M-501 FOR ADDITIONAL INFORMATION

AutoCAD SHX Text

FM

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text

FINISHED FLOOR

AutoCAD SHX Text

INDOOR

AutoCAD SHX Text

OUTDOOR

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text

1. SUPPORT EQUIPMENT TO THE STRUCTURE, REFER TO SPEC SECTION 220548.20 SUPPORT EQUIPMENT TO THE STRUCTURE, REFER TO SPEC SECTION 220548.20 "MECHANICAL SOUND, VIBRATION, AND SEISMIC CONTROL" AND SECTION 230548.19 "SEISMIC BRACING FOR HVAC" FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text

STEEL OR GALVANIZED PIPE SLEEVE

AutoCAD SHX Text

PACKED MINERAL WOOL INSULATION

AutoCAD SHX Text

PIPE

AutoCAD SHX Text

PIPE INSULATION (WHERE REQUIRED)

AutoCAD SHX Text

SILICONE CAULK

AutoCAD SHX Text

EXTERIOR WALL

AutoCAD SHX Text

SILICONE CAULK

AutoCAD SHX Text

FLOOR

AutoCAD SHX Text

TO FLOOR DRAIN

AutoCAD SHX Text

PROVIDE 15MM THICK FLEXIBLE CLOSED CELL INSULATION ON FILTER FEEDER

AutoCAD SHX Text BOLT UNISTRUT TO WALL. PROVIDE 2 UNISTRUT PIPE CLAMPS SIZED TO GO ON OUTSIDE OF INSULATION

AutoCAD SHX Text

SHOT FEEDER

AutoCAD SHX Text

75MM FLECK TOP

AutoCAD SHX Text

BALL VALVE FOR PIPE DN50 AND SMALLER. BUTTERFLY VALVE FOR PIPE DN65 AND LARGER

AutoCAD SHX Text

FLOW SWITCH

AutoCAD SHX Text

BALANCING VALVE

AutoCAD SHX Text

FLOW METER

AutoCAD SHX Text

MANUAL AIR VENT

AutoCAD SHX Text

CONCRETE EQUIPMENT PAD. REFER TO CIVIL DRAWINGS

AutoCAD SHX Text

UNION

AutoCAD SHX Text

STRAINER

AutoCAD SHX Text

DN20 DRAIN VALVE WITH THREADED HOSE CONNECTION AND CAP

AutoCAD SHX Text

0-50°C RANGE, TYP.

AutoCAD SHX Text

0-500 KPA RANGE, TYP.

AutoCAD SHX Text

FLEXIBLE PIPE CONNECTION. TYP

AutoCAD SHX Text

PRESURE/TEMPERATURE TEST PORT. TYP.

AutoCAD SHX Text M

AutoCAD SHX Text

MOTORIZED FLOW CONTROL - ISOLATION VALVE

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-102

AutoCAD SHX Text NOTES: 1. REFER TO FCU COIL PIPING FOR PIPING CONNECTIONS. REFER TO FCU COIL PIPING FOR PIPING CONNECTIONS. 2. REFER TO THE FLOOR PLANS FOR DUCT SIZES FOR RETURN AND SUPPLY AIR DUCTS.REFER TO THE FLOOR PLANS FOR DUCT SIZES FOR RETURN AND SUPPLY AIR DUCTS.

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

FILTER ACCESS

AutoCAD SHX Text

CONDENSATE DRAIN.

AutoCAD SHX Text

AUXILIARY CONDENSATE DRAIN PAN WITH CONDENSATE OVERFLOW FLOAT SWITCH

AutoCAD SHX Text

BELT DRIVE MOTOR ON LARGE UNITS ONLY

AutoCAD SHX Text

HEATING COIL

AutoCAD SHX Text

COOLING COIL

AutoCAD SHX Text

RETURN DUCT

AutoCAD SHX Text

FLEXIBLE DUCT CONNECTOR, TYP.

AutoCAD SHX Text

DOUBLE NUT AND WASHER, TYP. OF 4

AutoCAD SHX Text

10 THREADED ROD, TYP. OF 4.

AutoCAD SHX Text

SECURE TO STRUCTURE WITH EXPANSION ANCHOR

AutoCAD SHX Text

SUPPORT BRACKETS PROVIDED BY MANUFACTURER

AutoCAD SHX Text

EXISTING CONCRETE DECK

AutoCAD SHX Text

SUPPLY DUCT

AutoCAD SHX Text

300 MAX

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

M-503

IN

T M

A R

IT

IM

E F

A C

IL

IT

Y

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

S Y

S

TE

M S

C O

M M

A N

D

A

TL

A N

TI

C

B1 BRACING DETAIL FOR SUSPENDED MECHANICAL EQUIPMENT WITH EXTERNAL VIBRATION ISOLATORS DETAIL

PLAN VIEW

PLAN VIEW

A1

BRACING DETAIL FOR SUSPENDED MECHANICAL EQUIPMENT WITH INTERNAL VIBRATION ISOLATORS OR NO REQUIREMENT

FOR VIBRATION ISOLATION DETAIL

JOIST OR I BEAM CENTERLINE PERPENDICULAR TO UNITJOIST OR I BEAM CENTERLINE PARALLEL TO UNITCONCRETE DECK

D1 HANGAR ROD ATTACHMENT DETAIL

A4 CLOSEUP - PARALLEL CONNECTION DETAIL

GENERAL SHEET NOTES

ELEVATIONS

ELEVATIONS

AutoCAD SHX Text

MECHANICAL DETAILS

AutoCAD SHX Text 14157184

AutoCAD SHX Text

AutoCAD SHX Text

OLS

AutoCAD SHX Text

OLS

AutoCAD SHX Text

FISH

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

SCE

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

CONSTR. CONTR. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

NAVFAC METRIC DRAWFORM REVISION: 01 OCTOBER 2018

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.:

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text

VARIOUS LOCATIONS

AutoCAD SHX Text 1838720

AutoCAD SHX Text

AutoCAD SHX Text

D. EVANS VIA EMAIL

AutoCAD SHX Text 01/15/2026

AutoCAD SHX Text

MJD/ATP

AutoCAD SHX Text

DSN

AutoCAD SHX Text

PLANNING, DESIGN AND CONSTRUCTION

AutoCAD SHX Text

NORFOLK VA

AutoCAD SHX Text

WBF

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

DES PROD DIR

AutoCAD SHX Text

FIRE PROTECTION ENGINEER

AutoCAD SHX Text 45%%D

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

VIBRATION ISOLATION

AutoCAD SHX Text

TYP.

AutoCAD SHX Text 45%%D

AutoCAD SHX Text

30° TO90°

AutoCAD SHX Text

30° TO90°

AutoCAD SHX Text

30° TO90°

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-503

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-503

AutoCAD SHX Text C1

AutoCAD SHX Text M-504

AutoCAD SHX Text C1

AutoCAD SHX Text M-504

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text M-503

AutoCAD SHX Text

I BEAM

AutoCAD SHX Text

JOIST

AutoCAD SHX Text

I BEAM

AutoCAD SHX Text

JOIST

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

N…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .