Attachment 5 - Provision FAR 52.225-18 Place of Manufacture.pdf

FAR Clause PDF 263 KB Posted

Attached to
New Bale Press and Conveyor System with Scissor Lift-Tilt Table for the USDA, AMS, Cotton & Tobacco Program Memphis, TN Cotton Classing Office
Solicitation number
12639526Q0018
Issued by

About this file

This document is a Federal Acquisition Regulation (FAR) provision (52.225-18) addressing Place of Manufacture requirements for vendors submitting quotations. The provision defines "manufactured end product" across multiple product and service codes (PSCs), excluding specific categories like lumber, agricultural supplies, live animals, and raw materials. Vendors are required to indicate whether their end products are predominantly manufactured in or outside the United States for statistical purposes, by checking the appropriate box on the form. The provision mandates that vendors specify the place where a product is assembled or processed from raw materials, with reassembly not counting as the place of manufacture.

View the file

Other versions and copies of FAR 52.225-18

File Revision Posted Attached to
Attachment 3 Provision 52.225-18 Place of Manufacture.pdf Revision not stated Cow Cake - Miles City MT
Attachment 3 Provision 52.225-18 Place of Manufacture.pdf Revision not stated Flux Towers - Mandan ND
Attachment 3 Provision 52.225-18 Place of Manufacture.pdf Revision not stated High Throughput Screening System - Corvallis OR
Attachment 3 Provision 52.225-18 Place of Manufacture.pdf Revision not stated Carbon Flux Sensor and Tower
S02 - ATTACHMENT 2 - FAR 52.225-18 Place of Manufacture.docx Revision not stated 2310--Deployable Mobile Dental Health Clinic Vehicle
Attach 004 52.225-18-Place of Manufacture.docx Revision not stated 6540--Unrestricted Low Vision Diagnostic Dispensing System and accessories for Lebanon VA Medical Center
Attach 004 52.225-18-Place of Manufacture.docx Revision not stated 6540--Small Business Set Aside-- Low Vision Diagnostic Dispensing System and accessories at Lebanon VA Medical Center
Attach 004 52.225-18-Place of Manufacture.docx Revision not stated 6515--VOSB Set Aside WEST NORRITON CBOC AUDIOMETRIC SOUND BOOTH
Attach 02 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6525--Delivery and installation of Philips Telemetry Expansion
Attach 02 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--Delivery of Welch Allyn Green Series 777 Integrated Wall Diagnostic Systems (Brand Name Only)
S02 Attach 04 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--36C244-23-AP-1870 | Bard Rotarex Drive System W/Catheters (VA-23-00040058)
Attach 02 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6525--Delivery of MRI Safe Camera System
Attach 02 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--Delivery of Misc. Eye Clinic Equipment
Attach 02 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6640--Delivery of OsmoPRO MAX Brand Name Only
S02 Attach 04 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--Amendment to Unrestricted CSS (Revised Statement of Need)
Attach 02 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--Delivery of Chiropractic Misc. Equipment
Attach 02 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--Delivery of Brand Name or Equal Wireless Surgical Headlights
Attach 03 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--Medtronic Bundle NIM Vital System W/Cart (Delivery for VA Pittsburgh). This is Brand Name Only. SDVOSB set-aside
Attach 03 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6640--Tissue-Tek Glas g2 Automated Glass Coverslipper (Delivery for VA Philadelphia) This is Brand Name Only.
Attach 03 52.225-18 PLACE OF MANUFACTURE.docx Revision not stated 6515--Delivery of Brand Name Only Hologic Fluent Fluid Management System to the Philadelphia VA Medical Center
Show all 20

Who attaches FAR 52.225-18

Other files

File Type Posted
SF 30 Amendment PA14 Solicitation 12639526Q0018.pdf PDF
Attachment 3 - Vendor Quotation Form Solicitation 12639526Q0018 Amendment PA14.xlsx XLSX spreadsheet
Exhibit 9 - Baler Eject Into Bagger Process.mp4 MP4 file
SF 30 Amendment PA13 Solicitation 12639526Q0018.pdf PDF
SF 30 Amendment PA12 Solicitation 12639526Q0018.pdf PDF
SF 30 Amendment PA11 Solicitation 12639526Q0018.pdf PDF
SF 30 Amendment PA10 Solicitation 12639526Q0018.pdf PDF
Attachment 2 - Specifications Amendment PA09.pdf PDF
Exhibit 8 - Additional Photographs and Drawings Amendment PA09.pdf PDF
SF 30 Amendment PA09 Solicitation 12639526Q0018.pdf PDF
SF 30 Amendment PA08 Solicitation 12639526Q0018.pdf PDF
SF 30 Amendment PA07 Solicitation 12639526Q0018.pdf PDF
Exhibit 6 - Bale Eject.MOV MOV file
Exhibit 7 - Weighing Zone-Bagger.MOV MOV file
SF 30 Amendment PA06 Solicitation 12639526Q0018.pdf PDF
Exhibit 5 - Adding Steel Ties.MOV MOV file
SF 30 Amendment PA05 Solicitation 12639526Q0018.pdf PDF
Attachment 2 - Specifications Amendment PA05.pdf PDF
SF 30 Amendment PA04 Solicitation 12639526Q0018 Rev.pdf PDF
SF 30 Amendment PA03 Solicitation 12639526Q0018.pdf PDF
SF 30 Amendment PA02 Solicitation 12639526Q0018.pdf PDF
Exhibit 4 - Drawing Top View Baler Room South Wall and Dock.pdf PDF
SF 30 Amendment PA01 Solicitation 12639526Q0018.pdf PDF
Attachment 3 - Vendor Quotation Form Solicitation 12639526Q0018.xlsx XLSX spreadsheet
Attachment 1 - Solicitation Terms and Conditions.pdf PDF
Attachment 2 - Specifications.pdf PDF
Exhibit 3 - Questions and Answers Previous Solicitation.pdf PDF
Attachment 4 - Vendor Experience and Past Performance Sheet Solicitation 12639526Q0018.docx DOCX document
Attachment 3 - Vendor Quotation Form Solicitation 12639526Q0018.xlsx XLSX spreadsheet
Show all 29

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

INSTRUCTIONS TO VENDORS: QUOTATIONS MUST INCLUDE A COMPLETED

COPY OF THE PROVISION FAR 52.225-18. VENDOTRS MUST UTILIZE THIS FORM

TO COMPLETE THE INFORMATION REQUIRED (CHECK THE APPLICABLE

HIGHLIGHTED BOX BELOW).

52.225-18 Place of Manufacture.

As prescribed in 25.1101 (f), insert the following provision:

Place of Manufacture (Aug 2018)

(a) Definitions. As used in this provision— Manufactured end product means any end product in product and service codes (PSCs) 1000- 9999, except-

(1) FPSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-

(1) □ In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) □ Outside the United States.

(End of provision)

File details come from the government source that posted it. Updated .