Exhibit 4 - Drawing Top View Baler Room South Wall and Dock.pdf

This is a technical drawing produced by Siemens PLM Software, dated 12/17/2025, drawn by G. Moore. The drawing provides a top view layout of a Baler Room South Wall and Dock area, identified as the QA Dock project, Sheet 1 of 1 at a 1:1 scale.

The drawing depicts a facility layout measuring 408 inches in total length, with various work areas and features marked. Key elements include a Garage Door (100½ inches wide), Dock Conveyor (72 inches high, 36 inches wide Open Work Area), Fire Lanes on both sides of the Conveyor, a QA Baler Room South Wall section, a Lockout Box, and an Exit Door. Additional measurements include a Fire Lane width of 19¼ inches on the left side, a 24½-inch spacing near the Lockout Box, and a 34-inch clearance to the Exit Door, with an additional 34½-inch measurement noted. The drawing uses standard architectural conventions with dimension lines, reference grid columns (1-5) and rows (A-D), and includes a north arrow indicator in the lower left corner.