09900.doc

SECTION 09900

PAINTING

PART 1 - GENERAL CONDITIONS

1.01 SUMMARY

A. Provide staining and surface preparation for exterior unfinished surfaces, exposed interior items, exposed roof elements and other accessories,

1.02 STANDARDS

A. National Paint and Coatings Association.

1.03 SUBMITTALS

A. Submit product data, samples, 4’ x 4’ mockup of each paint and stain color, warranties.

PART 2 - PRODUCTS

2.01 PRODUCTS

A. Products: Sherwin-Williams Company, Glidden Paint Company, Pratt and Lambert, Inc., Valspar Paint Company, Olympic Stain

Company.

B.

Regulations: Compliance with VOC and environmental regulations.

C.

First-line commercial-quality for all coating systems.

PART 3 - EXECUTION

3.01 INSTALLATION

A. This Section to comply with all requirements of Division 1.

B.

Protect hardware and adjacent surfaces.

C.

Sand before painting or staining until smooth and flat and sand between coats.

D.

Apply paint/stain to achieve manufacturer’s recommended dry film thicknesses.

F.

Recoat areas which show bleed-through or defects.

G.

Touch-up damaged surfaces at completion of construction.

H.

Clean paint/stain splatter from adjacent surfaces including slab.

I.

All work shall performed when exterior temperature is above 45 Degrees Fahrenheit.

3.02 SCHEDULE

A. Exterior surfaces:

1.

Zinc Coated (Galvanized) Metal – One coat of dust-zinc oxide primer coating, two coats of oil-based exterior paint.

2.

Ferrous Metal – One coat of base paint, two coats of oil-based exterior paint.

3.

Wood – Two coats of exterior oil-based semi-transparent wood stain.

4.

Concrete – Transparent sealer – Two coats HB-150 Water Repellent.

PART 4 - MEASUREMENT AND PAYMENT

4.01

MEASUREMENT

The work specified herein will not be measured for payment.

4.02

PAYMENT

This work is incidental to related pay items

END OF SECTION

PAGE

09900-1