4500-CIVIL.pdf

This is a comprehensive set of architectural and engineering drawings for a New Manufacturing Plant facility project located in Oklahoma City, Oklahoma, prepared by the G M Assembly Division. The document contains 49 sheets of detailed construction plans, including general notes, foundation plans, floor framing plans, footing schedules, wall elevations, sections, and exterior/interior system details.

The drawings specify structural requirements for a large industrial manufacturing facility with multiple foundation areas, supported slab framing systems, and various building systems. Key structural elements include partial and enlarged foundation plans across seven designated areas, detailed footing locations and schedules with load capacities, first and second floor supported slab framing plans with concrete beam specifications, typical wall elevations for various wall types (designations include Types W, U, V, and multiple others), and detailed sections showing construction joint details, column pocket fills, and cladding attachment systems. The plans incorporate multiple reinforcement schedules for concrete beams and structural components, with specifications for concrete strength, rebar sizing, and load ratings throughout. Building systems detailed include exterior wall and grade beam systems with multiple construction variations, plenum wall elevation and detail sheets, and foundation access stair details. The drawings reference multiple ancillary details including typical corner reinforcing, wall opening details, and pipe penetration specifications. All drawings are prepared to professional standards with comprehensive notes, dimension callouts, and cross-referencing between sheets to ensure constructability and structural integrity of the completed facility.