26 51 00 INTERIOR LIGHTING.pdf

PDF 101 KB Posted

Attached to
WWYK250063 - INSTALL REACT VII FACILITY, B9001, POST V19
Solicitation number
FA813726R0026
Issued by

About this file

Summary: TAFB Technical Specifications Section 26 51 00 - Interior Lighting

This document is a technical specification for interior lighting systems at Tinker Air Force Base, Oklahoma, establishing comprehensive requirements for luminaires, light sources, drivers, ballasts, generators, lighting controls, and emergency lighting equipment. The specification mandates compliance with multiple standards including ASHRAE 90.1 and 189.1 for energy efficiency, UL safety standards, NEMA requirements, and IES photometric testing protocols. All luminaires must be products of manufacturers with at least two years of commercial use history, manufactured within six months of delivery, and supported by service organizations reasonably convenient to the installation site.

LED luminaires represent the primary requirement, with minimum efficacy ratings of 80–90 lumens per watt and Color Rendering Index (CRI) minimums of 70–90 depending on luminaire type. LED luminaires must include integral surge protection, maintain L70 lumen maintenance values of 50,000 hours per IES TM-21 calculations, comply with IES LM-79 and LM-80 testing standards, and carry DesignLights Consortium qualified product certifications for general application types. All LED luminaires require 10-year manufacturer warranties covering material, fixture finish, workmanship, all drivers, and replacement when more than 10 percent of LED sources are defective. Fluorescent luminaires must use electronic ballasts with power factors of 0.98 minimum, ballast factors of 0.95 minimum, and comply with CEC Title 24 requirements. HID and induction luminaires are also specified with detailed ballast and generator requirements. The specification includes detailed requirements for occupancy/vacancy sensors, dimming controllers, lighting contactors, timeswitches, emergency lighting equipment (exit signs with maximum five-watt consumption, LED and fluorescent emergency drivers/ballasts), support hardware, and installation procedures requiring independent suspension of recessed luminaires from building structure using minimum four wires or rods per unit, with ceiling grid clips explicitly prohibited.

View the file

Other files

File Type Posted
Solicitation Amendment FA813726R00260001 - CANCELLATION.pdf PDF
Solicitation Amendment FA813726R00260001 SF 30.pdf PDF
250063_ATT 10_Submittal Register.pdf PDF
250063_ATT 9_SOW.pdf PDF
250063_ATT 11_Drawings.pdf PDF
WWYK250063-04March2026.pdf PDF
2020 TAFB Facility Standard.pdf PDF
2026 TAFB Electrical Standard - Signed.pdf PDF
SOW Att 02a_Controlled Area Training.pptx PPTX presentation
SOW Att 02c_Controlled Area Training - Certificate.pdf PDF
22 00 00.pdf PDF
28 31 76.pdf PDF
23 09 23.02.pdf PDF
07 14 00.pdf PDF
08 51 23.pdf PDF
10 44 16.pdf PDF
07 21 16.pdf PDF
00 72 00.pdf PDF
00 71 00.pdf PDF
01 78 00.pdf PDF
01 33 00.pdf PDF
000_TABLE OF CONTENTS.pdf PDF
01 78 23.pdf PDF
esvperf_singledual_2023_V2.pdf PDF
lrad331965pd_spec.pdf PDF
REACT VII SA-01.pdf PDF
TAFB B9001 VAV Schedule.pdf PDF
ARCH-COMBINED.pdf PDF
4500-MUG.pdf PDF
overall plan 04.15.2021.pdf PDF
250063_ATT 10_Submittal Register.xlsx XLSX spreadsheet
26 05 73 POWER STUDIES.pdf PDF
26 20 00.pdf PDF
09 90 00.pdf PDF
23 09 13.pdf PDF
23 36 00.00 40.pdf PDF
08 71 00.pdf PDF
05 40 00.pdf PDF
10 14 00.10.pdf PDF
08 33 23.pdf PDF
08 11 13.pdf PDF
07 92 00.pdf PDF
01 33 16.00 10.pdf PDF
01 32 16.00 20.pdf PDF
image.png PNG image
250063 React VII_Hardware schedule 25MAR26 JL.xlsx XLSX spreadsheet
JOIST SPECIAL INSPECTIONS.xlsx XLSX spreadsheet
ELECTRICAL PANEL SCHEDULE U18L.xlsx XLSX spreadsheet
esvEH_singledual_2023_V2.pdf PDF
lk406gn05t4_spec.pdf PDF
Show 40 more

50 files listed here. See the rest on GovTribe.

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Ti nker AFB, OK TAFB Techni cal Spr ci f i cat i ons 2019

SECTI ON 26 51 00

I NTERI OR LI GHTI NG

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN SOCI ETY OF HEATI NG, REFRI GERATI NG AND AI R- CONDI TI ONI NG

ENGI NEERS ( ASHRAE)

ASHRAE 189. 1 ( 2011) St andar d f or t he Desi gn of Hi gh- Per f or mance Gr een Bui l di ngs Except Low- Ri se Resi dent i al Bui l di ngs

ASHRAE 90. 1 - I P ( 2010) Ener gy St andar d f or Bui l di ngs Except Low- Ri se Resi dent i al Bui l di ngs

ASTM I NTERNATI ONAL ( ASTM)

ASTM A1008/ A1008M ( 2015) St andar d Speci f i cat i on f or St eel , Sheet , Col d- Rol l ed, Car bon, St r uct ur al , Hi gh- St r engt h Low- Al l oy and Hi gh- St r engt h Low- Al l oy wi t h I mpr oved For mabi l i t y , Sol ut i on Har dened, and Bake Har dened

ASTM A580/ A580M ( 2015) St andar d Speci f i cat i on f or St ai nl ess St eel Wi r e

ASTM A641/ A641M ( 2009a; R 2014) St andar d Speci f i cat i on f or Zi nc- Coat ed ( Gal vani zed) Car bon St eel Wi r e

ASTM A653/ A653M ( 2015) St andar d Speci f i cat i on f or St eel Sheet , Zi nc- Coat ed ( Gal vani zed) or Zi nc- I r on Al l oy- Coat ed ( Gal vanneal ed) by t he Hot - Di p Pr ocess

ASTM B164 ( 2003; R 2014) St andar d Speci f i cat i on f or Ni ckel - Copper Al l oy Rod, Bar , and Wi r e

ASTM B633 ( 2015) St andar d Speci f i cat i on f or El ect r odeposi t ed Coat i ngs of Zi nc on I r on and St eel

ASTM D4674 REV A ( 2002; R 2010) St andar d Pr act i ce f or Accel er at ed Test i ng f or Col or St abi l i t y of Pl ast i cs Exposed t o I ndoor Of f i ce Environments

CALI FORNI A ENERGY COMMI SSI ON ( CEC)

CEC Ti t l e 24 ( 2008; Ef f ect i ve Jan 2010) Cal i f or ni a' s

Apr i l 2019 Page 1 SECTI ON 26 51 00

Ener gy Ef f i c i ency St andar ds f or Resi dent i al and Nonr esi dent i al Bui l di ngs

I LLUMI NATI NG ENGI NEERI NG SOCI ETY ( I ES)

I ES LM- 79 ( 2008) El ect r i cal and Phot omet r i c Measur ement s of Sol i d- St at e Li ght i ng Products

I ES LM- 80 ( 2015) Measur i ng Lumen Mai nt enance of LED Li ght Sour ces

I ES RP- 16 ( 2010; Addendum A 2008; Addenda B 2009;

Addendum C 2016) Nomencl at ur e and Def i ni t i ons f or I l l umi nat i ng Engi neer i ng

I ES TM- 21 ( 2011) Pr oj ect i ng Long Ter m Lumen Mai nt enance of LED Li ght Sour ces

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

I EEE 100 ( 2000; Ar chi ved) The Aut hor i t at i ve Di ct i onar y of I EEE St andar ds Ter ms

I EEE C2 ( 2012; Er r at a 1 2012; I NT 1- 4 2012; Er r at a

2 2013; I NT 5- 7 2013; I NT 8- 10 2014; I NT

11 2015; I NT 12 2016) Nat i onal El ect r i cal Saf et y Code

I EEE C62. 41 ( 1991; R 1995) Recommended Pr act i ce on Sur ge Vol t ages i n Low- Vol t age AC Power Circuits

I EEE C62. 41. 1 ( 2002; R 2008) Gui de on t he Sur ges Envi r onment i n Low- Vol t age ( 1000 V and Less) AC Power Ci r cui t s

I EEE C62. 41. 2 ( 2002) Recommended Pr act i ce on Char act er i zat i on of Sur ges i n Low- Vol t age ( 1000 V and Less) AC Power Ci r cui t s

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

ANSI ANSLG C78. 43 ( 2013) El ect r i c l amps: Si ngl e- Ended Met al Hal i de Lamps

ANSI C78. 389 ( 2004; R 2009) Amer i can Nat i onal St andar d f or El ect r i c Lamps - Hi gh I nt ensi t y Di schar ge ( HI D) - Met hods of Measur i ng Characteristics

ANSI C78. 901 ( 2005) Amer i can Nat i onal St andar d f or El ect r i c Lamps - Si ngl e Base Fl uor escent Lamps- - Di mensi onal and El ect r i cal Characteristics

ANSI C82. 2 ( 2002) Amer i can Nat i onal St andar d f or Lamp Bal l ast s- - Met hods of Measur ement of Fl uor escent Lamp Bal l ast s

Apr i l 2019 Page 2 SECTI ON 26 51 00

ANSI C82. 4 ( 2002) Amer i can Nat i onal St andar d f or Bal l ast s f or Hi gh- I nt ensi t y- Di schar ge and Low- Pr essur e Sodi um ( LPS) Lamps ( Mul t i pl e- Suppl y Type)

ANSI / NEMA C78. LL 1256 ( 2003) Pr ocedur es f or Fl uor escent Lamp Sampl e Pr epar at i on and t he Toxi c i t y Char act er i st i c Leachi ng Pr ocedur e ( TCLP)

NEMA 250 ( 2014) Encl osur es f or El ect r i cal Equi pment ( 1000 Vol t s Maxi mum)

NEMA ANSLG C78. 377 ( 2015) Amer i can Nat i onal St andar d f or El ect r i c Lamps— Speci f i cat i ons f or t he Chr omat i c i t y of Sol i d St at e Li ght i ng Products

NEMA ANSLG C78. 81 ( 2014) Amer i can Nat i onal St andar d f or El ect r i c Lamps- - Doubl e- Capped Fl uor escent Lamps- - Di mensi onal and El ect r i cal Characteristics

NEMA ANSLG C82. 11 ( 2011) Lamp Bal l ast s - Hi gh- Fr equency Fl uor escent Lamp Bal l ast s

NEMA ANSLG C82. 14 ( 2006) Lamp Bal l ast s Low- Fr equency Squar e Wave El ect r oni c Bal l ast s - - f or Met al Hal i de Lamps

NEMA ANSLG C82. 9 ( 2010) Amer i can Nat i onal St andar d f or Lamp Bal l ast s— Hi gh- I nt ensi t y Di schar ge and Low- Pr essur e Sodi um Lamps— Def i ni t i ons

NEMA C78. 376 ( 2014) El ect r i c Lamps — Speci f i cat i ons f or t he Chr omat i c i t y of Fl uor escent Lamps

NEMA C78. LL 3 ( 2003; R 2015) El ect r i c Lamps - Pr ocedur es f or Hi gh I nt ensi t y Di schar ge Lamp Sampl e Pr epar at i on and t he Toxi c i t y Char act er i st i c Leachi ng Pr ocedur e

NEMA C82. 77 ( 2002) Har moni c Emi ssi on Li mi t s - Rel at ed Power Qual i t y Requi r ement s f or Li ght i ng Equipment

NEMA I CS 2 ( 2000; R 2005; Er r at a 2008) St andar d f or Cont r ol l er s, Cont act or s, and Over l oad Rel ays Rat ed 600 V

NEMA I CS 6 ( 1993; R 2011) Encl osur es

NEMA SSL 1 ( 2010) El ect r oni c Dr i ver s f or Led Devi ces, Ar r ays, or Syst ems

NEMA SSL 3 ( 2011) Hi gh- Power Whi t e LED Bi nni ng f or Gener al I l l umi nat i on

NEMA SSL 7A ( 2015) Phase- Cut Di mmi ng f or Sol i d St at e

Apr i l 2019 Page 3 SECTI ON 26 51 00

Li ght i ng: Basi c Compat i bi l i t y

NEMA WD 1 ( 1999; R 2015) St andar d f or Gener al Col or Requi r ement s f or Wi r i ng Devi ces

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 101 ( 2015; ERTA 2015) Li f e Saf et y Code

NFPA 70 ( 2014; AMD 1 2013; Er r at a 1 2013; AMD 2 2013; Er r at a 2 2013; AMD 3 2014; Er r at a 3- 4 2014; AMD 4- 6 2014) Nat i onal El ect r i cal Code

UNDERWRI TERS LABORATORI ES ( UL)

UL 1029 ( 1994; Repr i nt Dec 2013) Hi gh- I nt ensi t y- Di schar ge Lamp Bal l ast s

UL 1472 ( 2015) UL St andar d f or Saf et y Sol i d- St at e Di mmi ng Cont r ol s

UL 1598 ( 2008; Repr i nt Oct 2012) Lumi nai r es

UL 20 ( 2010; Repr i nt Feb 2012) Gener al - Use Snap Switches

UL 2043 ( 2013) Fi r e Test f or Heat and Vi s i bl e Smoke Rel ease f or Di scr et e Pr oduct s and Thei r Accessor i es I nst al l ed i n Ai r - Handl i ng Spaces

UL 508 ( 1999; Repr i nt Oct 2013) I ndust r i al Cont r ol Equi pment

UL 844 ( 2012) St andar d f or Lumi nai r es f or Use i n Hazar dous ( Cl assi f i ed) Locat i ons

UL 8750 ( 2009; Repr i nt May 2014) UL St andar d f or Saf et y Li ght Emi t t i ng Di ode ( LED) Equi pment f or Use i n Li ght i ng Pr oduct s

UL 916 ( 2007; Repr i nt Aug 2014) St andar d f or Ener gy Management Equi pment

UL 917 ( 2006; Repr i nt Aug 2013) UL St andar d f or Saf et y Cl ock- Oper at ed Swi t ches

UL 924 ( 2006; Repr i nt Dec 2015) St andar d f or Emer gency Li ght i ng and Power Equi pment

UL 935 ( 2001; Repr i nt Aug 2014) St andar d f or Fl uor escent - Lamp Bal l ast s

UL 94 ( 2013; Repr i nt Jan 2016) St andar d f or Test s f or Fl ammabi l i t y of Pl ast i c Mat er i al s f or Par t s i n Devi ces and Appliances

Apr i l 2019 Page 4 SECTI ON 26 51 00

1. 2 RELATED REQUI REMENTS

Mat er i al s not consi der ed t o be l umi nai r es or l umi nai r e accessor i es ar e speci f i ed i n Sect i on 26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM. Lumi nai r es and accessor i es mount ed on ext er i or sur f aces of bui l di ngs ar e speci f i ed i n Sect i on 26 56 00 EXTERI OR LI GHTI NG.

1. 3 DEFINITIONS

a. Unl ess ot her wi se speci f i ed or i ndi cat ed, el ect r i cal and el ect r oni cs t er ms used i n t hese speci f i cat i ons, and on t he dr awi ngs, must be as def i ned i n I EEE 100 and I ES RP- 16.

b. For f l uor escent and HI D l umi nai r e l i ght sour ces, " Aver age Rat ed Li f e" i s t he t i me af t er whi ch 50 per cent of a l ar ge gr oup of l i ght sour ces wi l l have f ai l ed and 50 per cent wi l l have sur vi ved under nor mal conditions.

c. For LED l umi nai r e l i ght sour ces, " Usef ul Li f e" i s t he oper at i ng hour s bef or e r eachi ng 70 per cent of t he i ni t i al r at ed l umen out put ( L70) wi t h no cat ast r ophi c f ai l ur es under nor mal oper at i ng condi t i ons. Thi s i s al so know as 70 per cent " Rat ed Lumen Mai nt enance Li f e" as def i ned in I ES LM- 80.

d. For f l uor escent and HI D l umi nai r es, " Lumi nai r e Ef f i cacy Rat i ng" ( LER) i s t he appr opr i at e measur e of ener gy ef f i c i ency, measur ed i n l umens/ wat t . Speci f i cal l y i t i s t he l umi nai r e' s ef f i c i ency mul t i pl i ed by t he t ot al r at ed l i ght sour ce l umens and t he bal l ast f act or , di v i ded by t he l umi nai r e i nput wat t s.

e. For LED l umi nai r es, " Lumi nai r e Ef f i cacy" ( LE) i s t he appr opr i at e measur e of ener gy ef f i c i ency, measur ed i n l umens/ wat t . Thi s i s gat her ed f r om LM- 79 dat a f or t he l umi nai r e, i n whi ch absol ut e phot omet r y i s used t o measur e t he l umen out put of t he l umi nai r e as one ent i t y, not t he sour ce separ at el y and t hen t he sour ce and housi ng together.

f . Tot al har moni c di st or t i on ( THD) i s t he r oot mean squar e ( RMS) of al l t he har moni c component s di v i ded by t he t ot al f undament al cur r ent .

1. 4 SUBMITTALS

Gover nment appr oval i s r equi r ed f or al l submi t t al s. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Lumi nai r e Dr awi ngs

Occupancy/ Vacancy Sensor Cover age Layout

SD- 03 Pr oduct Dat a

Luminaires

Li ght Sour ces

Dr i ver s, Bal l ast s and Gener at or s

Apr i l 2019 Page 5 SECTI ON 26 51 00

LED Lumi nai r e War r ant y

Lumi nai r e Desi gn Dat a

Vacancy Sensor s

Di mmi ng Cont r ol l er s ( Di mmer s)

Li ght i ng Cont act or

Timeswitch

Power Hook Lumi nai r e Hanger s

Exi t Si gns

LED Emer gency Dr i ver s

Fl uor escent Emer gency Bal l ast s

Occupancy Sensor s

Ambi ent Li ght Level Sensor

Li ght i ng Cont r ol Panel

SD- 06 Test Repor t s

Occupancy/ Vacancy Sensor Ver i f i cat i on Test s

Ener gy Ef f i c i ency

SD- 07 Cer t i f i cat es

LED Dr i ver and Di mmi ng Swi t ch Compat i bi l i t y Cer t i f i cat e

1. 5 QUALI TY CONTROL

1. 5. 1 Lumi nai r e Dr awi ngs

I ncl ude di mensi ons, accessor i es, and i nst al l at i on and const r uct i on det ai l s. Phot omet r i c dat a, i ncl udi ng zonal l umen dat a, aver age and mi ni mum r at i o, ai mi ng di agr am, and comput er i zed candl epower di st r i but i on dat a must accompany shop dr awi ngs.

1. 5. 2 Occupancy/ Vacancy Sensor Cover age Layout

Pr ovi de f l oor pl ans showi ng cover age l ayout s of al l devi ces usi ng manuf act ur er ' s pr oduct i nf or mat i on.

1. 5. 3 LED Dr i ver and Di mmi ng Swi t ch Compat i bi l i t y Cer t i f i cat e

Submi t cer t i f i cat i on f r om t he l umi nai r e, dr i ver , or di mmer swi t ch manuf act ur er t hat ensur es compat i bi l i t y and oper abi l i t y bet ween devi ces.

1. 5. 4 Lumi nai r e Desi gn Dat a

a. Pr ovi de saf et y cer t i f i cat i on and f i l e number f or t he l umi nai r e f ami l y t hat must be l i s t ed, l abel ed, or i dent i f i ed per t he NFPA 70 ( NEC) .

Apr i l 2019 Page 6 SECTI ON 26 51 00

Appl i cabl e t est i ng bodi es ar e det er mi ned by t he US Occupat i onal Saf et y Heal t h Admi ni st r at i on ( OSHA) as Nat i onal l y Recogni zed Test i ng Labor at or i es ( NRTL) and i ncl ude: CSA ( Canadi an St andar ds Associ at i on) , ETL ( Edi son Test i ng Labor at or y) , and UL ( Under wr i t er s Labor at or i es) .

1. 5. 5 Occupancy/ Vacancy Sensor Ver i f i cat i on Test s

Submi t t est r epor t out l i ni ng post - i nst al l at i on cover age and oper at i on of sensors.

1. 5. 6 Regul at or y Requi r ement s

I n each of t he publ i cat i ons r ef er r ed t o her ei n, consi der t he advi sor y pr ovi s i ons t o be mandat or y, as t hough t he wor d " must " had been subst i t ut ed f or " shoul d" wher ever i t appear s. I nt er pr et r ef er ences i n t hese publ i cat i ons t o t he " aut hor i t y havi ng j ur i sdi ct i on, " or wor ds of s i mi l ar meani ng, t o mean t he Cont r act i ng Of f i cer . Equi pment , mat er i al s, i nst al l at i on, and wor kmanshi p must be i n accor dance wi t h t he mandat or y and advi sor y pr ovi s i ons of NFPA 70, unl ess mor e st r i ngent r equi r ement s ar e speci f i ed or i ndi cat ed.

1. 5. 7 St andar d Pr oduct s

Pr ovi de mat er i al s and equi pment t hat ar e pr oduct s of manuf act ur er s r egul ar l y engaged i n t he pr oduct i on of such pr oduct s whi ch ar e of equal mat er i al , desi gn and wor kmanshi p. Pr oduct s must have been i n sat i sf act or y commer ci al or i ndust r i al use f or t wo year s pr i or t o bi d openi ng. The t wo- year per i od must i ncl ude appl i cat i ons of equi pment and mat er i al s under s i mi l ar c i r cumst ances and of s i mi l ar s i ze. The pr oduct must have been on sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he t wo- year per i od. Wher e t wo or mor e i t ems of t he same cl ass of equi pment ar e r equi r ed, t hese i t ems must be pr oduct s of a s i ngl e manuf act ur er ; however , t he component par t s of t he i t em need not be t he pr oduct s of t he same manuf act ur er unl ess st at ed i n t hi s sect i on.

1. 5. 7. 1 Al t er nat i ve Qual i f i cat i ons

Pr oduct s havi ng l ess t han a 2- year f i el d ser vi ce r ecor d wi l l be accept abl e i f a cer t i f i ed r ecor d of sat i sf act or y f i el d oper at i on f or not l ess t han 6000 hour s, excl usi ve of t he manuf act ur er s ' f act or y or l abor at or y t est s, i s f ur ni shed.

1. 5. 7. 2 Mat er i al and Equi pment Manuf act ur i ng Dat e

Pr oduct s manuf act ur ed mor e t han si x mont hs pr i or t o dat e of del i ver y t o s i t e must not be used, unl ess speci f i ed ot her wi se.

1. 5. 7. 3 Ener gy Ef f i c i ency

Submi t dat a i ndi cat i ng l umens per wat t ef f i cacy and col or r ender i ng i ndex of l i ght sour ce.

1. 6 WARRANTY

Suppor t al l equi pment i t ems by ser vi ce or gani zat i ons whi ch ar e r easonabl y conveni ent t o t he equi pment i nst al l at i on i n or der t o r ender sat i sf act or y

Apr i l 2019 Page 7 SECTI ON 26 51 00 ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

1. 6. 1 LED Lumi nai r e War r ant y

a. Pr ovi de a wr i t t en 10 year on- si t e r epl acement war r ant y f or mat er i al , f i x t ur e f i ni sh, and wor kmanshi p. On- si t e r epl acement i ncl udes t r anspor t at i on, r emoval , and i nst al l at i on of new pr oduct s.

( 1) I ncl ude f i ni sh war r ant y t o i ncl ude f ai l ur e and subst ant i al det er i or at i on such as bl i st er i ng, cr acki ng, peel i ng, chal k i ng, or fading.

( 2) Mat er i al war r ant y must i ncl ude:

( a) Al l dr i ver s.

( b) Repl acement when mor e t han 10 per cent of LED sour ces i n any l i ght bar or subassembl y( s) ar e def ect i ve or non- st ar t i ng.

b. War r ant y per i od must begi n on dat e of benef i c i al occupancy. Pr ovi de t he Cont r act i ng Of f i cer wi t h s i gned war r ant y cer t i f i cat es pr i or t o f i nal payment .

PART 2 PRODUCTS

2. 1 PRODUCT COORDI NATI ON

Pr oduct s and mat er i al s not consi der ed t o be l umi nai r es, l umi nai r e cont r ol s, or associ at ed equi pment ar e speci f i ed i n Sect i on 26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM. Lumi nai r es, l umi nai r e cont r ol s, and associ at ed equi pment f or ext er i or appl i cat i ons ar e speci f i ed i n Sect i on

26 56 00 EXTERI OR LI GHTI NG.

2. 2 LUMINAIRES

UL 1598, NEMA C82. 77, and UL 8750. Pr ovi de l umi nai r es as i ndi cat ed i n l umi nai r e schedul e and NL pl at es or det ai l s on pr oj ect pl ans. Pr ovi de l umi nai r es compl et e wi t h l i ght sour ces of quant i t y, t ype, and wat t age i ndi cat ed. Pr ovi de al l l umi nai r es of t he same t ype by t he same manuf act ur er . Lumi nai r es must be speci f i cal l y desi gned f or use wi t h t he dr i ver , bal l ast or gener at or and l i ght sour ce pr ovi ded.

2. 2. 1 LED Lumi nai r es

Pr ovi de l umi nai r es compl et e wi t h power suppl i es ( dr i ver s) and l i ght sour ces. Pr ovi de desi gn i nf or mat i on i ncl udi ng l umen out put and desi gn l i f e i n l umi nai r e schedul e on pr oj ect pl ans f or LED l umi nai r es. LED l umi nai r es must meet t he mi ni mum r equi r ement s i n t he f ol l owi ng t abl e:

LUMI NAI RE TYPE MI NI MUM LUMI NAI RE

EFFI CACY ( LE)

MI NI MUM COLOR RENDERI NG I NDEX

(CRI)

LED TROFFER -

1 x 4 2 x 2 2 x 4

90 LPW 80

Apr i l 2019 Page 8 SECTI ON 26 51 00

LUMI NAI RE TYPE MI NI MUM LUMI NAI RE

EFFI CACY ( LE)

MI NI MUM COLOR RENDERI NG I NDEX

(CRI)

LED Downl i ght 50 LPW 90

LED Tr ack or Accent 40 LPW 80

LED Low Bay/ Hi gh Bay 80 LPW 70

LED Li near Ambi ent 80 LPW 80

LED l umi nai r es must al so meet t he f ol l owi ng mi ni mum r equi r ement s:

Lumi nai r es must be pr ovi ded wi t h an i nt egr al sur ge pr ot ect i ve devi ce.

a. Lumi nai r es must have a mi ni mum 10 year manuf act ur er ' s war r ant y.

b. Lumi nai r es must have a mi ni mum L70 l umen mai nt enance val ue of 50, 000 hour s as cal cul at ed by I ES TM- 21, wi t h dat a obt ai ned per I ES LM- 80 requirements.

c. Lumi nai r e dr i ve cur r ent val ue must be i dent i cal t o t hat pr ovi ded by t est dat a f or l umi nai r e i n quest i on.

d. Lumi nai r es must be t est ed t o I ES LM- 79 and I ES LM- 80 st andar ds, wi t h t he r esul t s pr ovi ded as r equi r ed i n t he Submi t t al s par agr aph of t hi s specification.

e. Lumi nai r es must be l i s t ed wi t h t he Desi gnLi ght s Consor t i um ' Qual i f i ed Pr oduct s Li st ' when f al l i ng i nt o cat egor y of " Gener al Appl i cat i on" l umi nai r es, i . e. I nt er i or Di r ect i onal , Di spl ay Case, Tr of f er , Li near Ambi ent , or Low/ Hi gh Bay. Requi r ement s ar e shown i n t he Desi gnl i ght s Consor t i um " Techni cal Requi r ement s Tabl e" at https://data.energystar.gov/dataset/EPA-Recognized-Laboratories-For-Lighting-Products/jgwf-7qrr f . Pr ovi de Depar t ment of Ener gy ' Li ght i ng Fact s ' l abel f or each l umi nai r e.

2. 2. 2 Fl uor escent Lumi nai r es

UL 1598. Pr ovi de l i near and compact f l uor escent l umi nai r es compl et e wi t h housi ng, bal l ast and l i ght sour ce. Al l f l uor escent l umi nai r es must be equi pped wi t h el ect r oni c bal l ast s.

2. 2. 3 Hi gh I nt ensi t y Di schar ge ( HI D) Lumi nai r es

UL 1598. Pr ovi de HI D l umi nai r es compl et e wi t h housi ng, bal l ast and l i ght source.

2. 2. 4 I nduct i on Lumi nai r es

UL 1598. Pr ovi de i nduct i on l umi nai r es compl et e wi t h housi ng, gener at or and l i ght sour ce.

2. 2. 5 Lumi nai r es f or Hazar dous Locat i ons

I n addi t i on t o r equi r ement s st at ed her ei n, pr ovi de LED, Fl uor escent , HI D, l umi nai r es f or hazar dous l ocat i ons whi ch conf or m t o UL 844 or whi ch have Fact or y Mut ual cer t i f i cat i on f or t he c l ass and di v i s i on i ndi cat ed.

Apr i l 2019 Page 9 SECTI ON 26 51 00

2. 3 DRI VERS, BALLASTS and GENERATORS

2. 3. 1 LED Dr i ver s

NEMA SSL 1, UL 8750. LED dr i ver s must be el ect r oni c, UL Cl ass 1, const ant - cur r ent t ype and compl y wi t h t he f ol l owi ng r equi r ement s:

a. Out put power ( wat t s) and l umi nous f l ux ( l umens) as shown i n l umi nai r e schedul e f or each l umi nai r e t ype t o meet mi ni mum l umi nai r e ef f i cacy ( LE) val ue pr ovi ded.

b. Power Fact or ( PF) gr eat er t han or equal t o 0. 9 over t he f ul l di mmi ng r ange when pr ovi ded.

c. Cur r ent dr aw Tot al Har moni c Di st or t i on ( THD) of l ess t han 20 per cent .

d. Cl ass A sound r at i ng.

e. Oper abl e at i nput vol t age of 120- 277 vol t s at 60 her t z.

f . Mi ni mum 10 year manuf act ur er ' s war r ant y.

g. RoHS compl i ant .

h. I nt egr al t her mal pr ot ect i on t hat r educes or el i mi nat es t he out put power i f case t emper at ur e exceeds a val ue det r i ment al t o t he dr i ver .

i . UL l i s t ed f or dr y or damp l ocat i ons t ypi cal of i nt er i or i nst al l at i ons.

j . Non- di mmabl e or f ul l y- di mmabl e usi ng 0- 10V cont r ol as i ndi cat ed i n l umi nai r e schedul e.

2. 3. 2 Fl uor escent El ect r oni c Bal l ast s

NEMA ANSLG C82. 11, UL 935, CEC Ti t l e 24. Fl uor escent bal l ast s must not cont ai n any magnet i c cor e and coi l component s, and must meet t he f ol l owi ng requirements:

a. Pr ovi de wi t h t r ansi ent pr ot ect i on as r ecommended by I EEE C62. 41. 1 and

I EEE C62. 41. 2.

b. Pr ovi de UL l i s t ed Cl ass P, " A" sound r at i ng, wi t h mi ni mum power f act or r at i ng of 0. 98 and mi ni mum bal l ast f act or r at i ng of 0. 95.

c. Be desi gned f or t he wat t age and t ype of l i ght sour ce pr ovi ded i n t he l umi nai r e speci f i ed, and have ci r cui t di agr ams and l i ght sour ce connect i on i nf or mat i on pr i nt ed on t he ext er i or of t he bal l ast housi ng.

d. Cont ai n no PCB' s and be RoHS compl i ant .

e. Be manuf act ur ed i n an I SO 9001 cer t i f i ed f aci l i t y .

f . Oper at e at a f r equency gr eat er t han 20 kHz, and have a Lamp Cur r ent Cr est Fact or l ess t han 1. 7.

g. Have a l i ght r egul at i on of pl us or mi nus 10 per cent of l umen out put when oper at i ng wi t hi n a pl us or mi nus 10 per cent r ange of i nput voltage.

Apr i l 2019 Page 10 SECTI ON 26 51 00

h. Have a f ul l r epl acement war r ant y of f i ve year s f r om dat e of manufacture.

i . Pr ovi de al l f l uor escent bal l ast s as NEMA Pr emi um t ype.

2. 3. 2. 1 T8 Pr ogr ammed I nst ant - St ar t Fl uor escent Bal l ast s

Pr ovi de pr ogr ammed i nst ant - st ar t T8 el ect r oni c f l uor escent bal l ast s wi t h t he f ol l owi ng char act er i st i cs:

a. Tot al har moni c di st or t i on ( THD) : Must be 20 per cent ( maxi mum) .

b. I nput wat t age at 120/ 277 vol t s.

( 1) 29/ 28 wat t s ( maxi mum) when oper at i ng one F32T8 l i ght sour ce

( 2) 55/ 54 wat t s ( maxi mum) when oper at i ng t wo F32T8 l i ght sour ces

( 3) 84/ 82 wat t s ( maxi mum) when oper at i ng t hr ee F32T8 l i ght sour ces

( 4) 109/ 107 wat t s ( maxi mum) when oper at i ng f our F32T8 l i ght sour ces

d. Wher e i ndi cat ed on pr oj ect dr awi ngs, pr ovi de mul t i - l i ght sour ce l umi nai r es wi t h t wo or mor e bal l ast s t o accompl i sh t he swi t chi ng scenar i o i ndi cat ed.

2. 3. 2. 2 T5 ( l ong t wi n t ube) and T5HO Fl uor escent Bal l ast s

a. Tot al har moni c di st or t i on ( THD) : Not gr eat er t han 25 per cent when oper at i ng one l i ght sour ce, 15 per cent when oper at i ng t wo l i ght sour ces, and 20 per cent when oper at i ng t hr ee l i ght sour ces.

b. I nput wat t age:

( 1) 45 wat t s ( maxi mum) when oper at i ng one F40 T- 5 l i ght sour ce

( 2) 74 wat t s ( maxi mum) when oper at i ng t wo F40 T- 5 l i ght sour ces

( 3) 105 wat t s ( maxi mum) when oper at i ng t hr ee F40 T- 5 l i ght sour ces

c. Pr ovi de t hr ee and f our l i ght sour ce l umi nai r es wi t h t wo bal l ast s per l umi nai r e wher e mul t i l evel swi t chi ng i s i ndi cat ed.

2. 3. 2. 3 Compact Fl uor escent Bal l ast s

Pr ovi de pr ogr ammed- st ar t bal l ast s f or compact f l uor escent l umi nai r es.

2. 3. 2. 4 Fl uor escent El ect r oni c Di mmi ng Bal l ast s

Pr ovi de f l uor escent el ect r oni c di mmi ng bal l ast s wi t h t he f ol l owi ng characteristics:

a. Compl y wi t h NEMA ANSLG C82. 11, UL 935, and NFPA 70, unl ess speci f i ed ot her wi se. Pr ovi de bal l ast wi t h t r ansi ent i mmuni t y as r ecommended by I EEE C62. 41. 1 and I EEE C62. 41. 2. Pr ovi de di mmi ng capabi l i t y r ange f r om 100 t o 5 per cent ( mi ni mum r ange) of l i ght out put , f l i cker f r ee.

Bal l ast must st ar t l amp at any pr eset l i ght out put set t i ng wi t hout f i r st havi ng t o go t o f ul l l i ght out put . Pr ovi de bal l ast s desi gned f or t he wat t age of t he l i ght sour ces used i n t he i ndi cat ed

Apr i l 2019 Page 11 SECTI ON 26 51 00 appl i cat i on. Pr ovi de bal l ast s desi gned t o oper at e on t he vol t age syst em t o whi ch t hey ar e connect ed.

b. Pr ovi de power f act or of 0. 95 ( mi ni mum) at f ul l l i ght out put , and 0. 90 ( mi ni mum) over t he ent i r e di mmi ng r ange.

c. Pr ovi de bal l ast s desi gned t o oper at e at a f r equency of 20, 000 Her t z ( mi ni mum) . Bal l ast must be compat i bl e wi t h and not cause i nt er f er ence wi t h t he oper at i on of occupancy sensor s or ot her i nf r ar ed cont r ol syst ems. When avai l abl e, pr ovi de hi gher oper at i ng f r equency of 40, 000 her t z or above.

d. Bal l ast f act or at f ul l l i ght out put must be bet ween 0. 85 ( mi ni mum) and

1. 00 ( maxi mum) . Cur r ent cr est f act or must be a maxi mum of 1. 7.

e. Pr ovi de bal l ast wi t h Cl ass P UL l i s t i ng and wi t h a sound r at i ng of " A" .

f . Pr ovi de bal l ast wi t h c i r cui t di agr ams di spl ayed on t he bal l ast exterior.

g. Pr ovi de pr ogr ammed- st ar t bal l ast . Bal l ast may oper at e l i ght sour ces i n a ser i es c i r cui t conf i gur at i on. Pr ovi de ser i es/ par al l el wi r i ng f or pr ogr ammed- st ar t bal l ast s wher e avai l abl e.

h. Bal l ast must be capabl e of st ar t i ng and mai nt ai ni ng oper at i on at a mi ni mum of 0 degr ees F unl ess ot her wi se i ndi cat ed.

i . Pr ovi de bal l ast wi t h t ot al har moni c di st or t i on ( THD) of 20 per cent ( maxi mum) over t he ent i r e di mmi ng r ange.

j . Bal l ast s f or T- 5 and smal l er l i ght sour ces must have end- of - l i f e pr ot ect i on c i r cui t s as r equi r ed by NEMA ANSLG C78. 81 and ANSI C78. 901 as appl i cabl e.

2. 3. 2. 4. 1 T- 8 Lamp Bal l ast

I nput wat t age:

a. 35 wat t s ( maxi mum) when oper at i ng one F32T8 l i ght sour ce.

b. 70 wat t s ( maxi mum) when oper at i ng t wo F32T8 l i ght sour ces.

c. 104 wat t s ( maxi mum) when oper at i ng t hr ee F32T8 l i ght sour ces.

2. 3. 3 HI D Bal l ast s

UL 1029, NEMA ANSLG C82. 9, and ANSI C82. 2. Pr ovi de bal l ast t o ser ve one si ngl e l i ght sour ce.

2. 3. 3. 1 Met al Hal i de Bal l ast s

Pr ovi de bal l ast s desi gned t o oper at e on t he vol t age syst em t hey ar e connect ed and i n a nor mal ambi ent t emper at ur e of 40 degr ees C.

2. 3. 3. 1. 1 El ect r oni c Met al Hal i de Bal l ast s

NEMA ANSLG C82. 14. El ect r oni c met al hal i de bal l ast s must meet t he f ol l owi ng mi ni mum r equi r ement s:

Apr i l 2019 Page 12 SECTI ON 26 51 00

a. Power f act or gr eat er t han 90 per cent .

b. I nput vol t age of 120- 277 vol t s, pl us or mi nus 10 per cent .

c. Pr ovi de end- of - l i f e c i r cui t r y t o pr event bal l ast f r om oper at i ng i f l i ght sour ce i s i noper abl e, and t her mal pr ot ect i on t o pr event overheating.

d. Sound r at i ng of A, wi t h l amp cur r ent cr est f act or l ess t han 1. 5.

e. I nput cur r ent t ot al har moni c di st or t i on l ess t han 15 per cent .

f . Mi ni mum st ar t i ng t emper at ur e of mi nus 22 degr ees F.

g. UL l i s t ed and Rest r i ct i on of Hazar dous Subst ances Di r ect i ve ( RoHS) compliant.

2. 3. 3. 1. 2 Magnet i c Met al Hal i de Bal l ast s

ANSI C82. 4. Pul se- st ar t const ant wat t age aut ot r ansf or mer ( CWA) t ype must be used when avai l abl e. Pr obe- st ar t CWA, hi gh r eact ance/ hi gh power f act or ( HX/ HPF) or r egul at or t ype must be used when pul se- st ar t i s not avai l abl e. Bal l ast s must meet t he f ol l owi ng mi ni mum r equi r ement s:

a. Cl ass H i nsul at i on r at i ng.

b. Desi gned f or 60, 000 hour s of oper at i on at maxi mum r at ed t emper at ur e.

c. Mi ni mum st ar t i ng t emper at ur e of mi nus 22 degr ees F.

d. Nomi nal bal l ast f act or of 1. 0.

e. Capaci t or s must have sel f - cont ai ned bl eeder r esi st or as r equi r ed by

UL 1029.

f . House oi l - f i l l ed capaci t or s i n an al umi num or cor r osi on- r esi st ant st eel can and pr ovi de wi t h qui ck di sconnect t er mi nal s.

g. Capaci t or maxi mum case t emper at ur e must be 194 degr ees F f or oi l - f i l l ed and 221 degr ees F f or dr y f i l m t ype.

h. St ar t er / i gni t er must pr ovi de si x mont hs of l i ght sour ce open ci r cui t oper at i on wi t hout f ai l ur e and be desi gned t o wi t hst and 10, 000 hour s of cont i nuous pul s i ng.

2. 3. 4 I nduct i on Gener at or s

Gener at or must be connect ed, and oper at e i n conj unct i on wi t h an i nduct i ve power coupl er or coi l ( s) . Pr ovi de sol i d- st at e, hi gh- f r equency ( 200 kHz -

2. 67 MHz) t ype, wi t h power f act or gr eat er t han 0. 95, Cl ass A sound r at i ng, maxi mum i nput cur r ent THD of 15 per cent , oper at i ng vol t age of 120- 277V, and a mi ni mum st ar t i ng t emper at ur e of mi nus 30 degr ees F. Pr ovi de gener at or di mmabl e t o a mi ni mum of 50 per cent l i ght out put .

2. 4 LI GHT SOURCES

NEMA ANSLG C78. 377, NEMA SSL 3. Pr ovi de t ype and wat t age as i ndi cat ed i n l umi nai r e schedul e on pr oj ect pl ans.

Apr i l 2019 Page 13 SECTI ON 26 51 00

2. 4. 1 LED Li ght Sour ces

a. Cor r el at ed Col or Temper at ur e ( CCT) of 4000 degr ees K.

b. Mi ni mum Col or Render i ng I ndex ( CRI ) R9 val ue of 80.

c. Hi gh power , whi t e l i ght out put ut i l i z i ng phosphor conver si on ( PC) process.

d. RoHS compl i ant .

e. Pr ovi de l i ght sour ce col or consi st ancy by ut i l i z i ng a bi nni ng t ol er ance wi t hi n a 4 st ep McAdam el l i pse.

2. 4. 1. 1 LED Ret r of i t T8 Tubes

Pr ovi de l i near T8 t ubul ar LED l i ght sour ces t o r epl ace f l uor escent l i ght sour ces i n r enovat i on or ener gy conser vat i on pr oj ect s. Pr ovi de onl y wher e ent i r e l umi nai r es ar e not bei ng r epl aced. Li ght sour ces must be compat i bl e wi t h exi st i ng i nst ant - st ar t or pr ogr ammed- st ar t bal l ast s and have t he f ol l owi ng r equi r ement s:

a. Cor r el at ed Col or Temper at ur e ( CCT) of 4000 degr ees K.

b. Tot al Har moni c Di st or t i on ( THD) l ess t han 20 per cent , wi t h Power Fact or ( PF) gr eat er t han 90 per cent .

c. Mi ni mum l umen per wat t ef f i cacy gr eat er t han 120.

d. Mi ni mum beam angl e of 180 degr ees.

e. Mi ni mum 5 year war r ant y.

f . Mi ni mum Col or Render i ng I ndex ( CRI ) of 80.

2. 4. 2 Fl uor escent Li ght Sour ces

NEMA C78. 376. Fl uor escent l i ght sour ces must be l ow- mer cur y, ener gy- savi ngs t ype and be compl i ant wi t h t he most cur r ent TCLP t est pr ocedur e per ANSI / NEMA C78. LL 1256 at t he t i me of manuf act ur e.

2. 4. 2. 1 Li near Fl uor escent Li ght Sour ces

NEMA ANSLG C78. 81. Pr ovi de l i near f l uor escent l i ght sour ces wi t h mi ni mum CRI of 85 and CCT of 3500 degr ees K.

2. 4. 2. 1. 1 T8 Li near Fl uor escent Li ght Sour ces

Pr ovi de T8 l i ght sour ces wi t h medi um bi - pi n base, r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s, and wi t h an aver age r at ed l i f e of 30, 000 hour s usi ng a aver age t hr ee hour bur n t i me and pr ogr ammed- st ar t bal l ast .

2. 4. 2. 1. 2 T5HO ( Hi gh- Ouput ) Li near Fl uor escent Li ght Sour ces

Pr ovi de T5HO l i ght sour ces wi t h mi ni at ur e bi - pi n base, r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s, and wi t h an aver age r at ed l i f e of 30, 000 hour s usi ng a aver age t hr ee hour bur n t i me and pr ogr ammed st ar t bal l ast .

Apr i l 2019 Page 14 SECTI ON 26 51 00

2. 4. 2. 2 Compact Fl uor escent ( CFL) Li ght Sour ces

ANSI C78. 901. Pr ovi de compact f l uor escent ( CFL) l i ght sour ces wi t h mi ni mum CRI of 82 and CCT of 3500 degr ees K.

2. 4. 2. 2. 1 T5 Long Twi n Tube CFL Li ght Sour ce

Pr ovi de T5 Long Twi n Tube CFL l i ght sour ces wi t h f our pi n, 2G11 base, r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s, and wi t h an aver age r at ed l i f e of 20, 000 hour s.

2. 4. 2. 2. 2 T4 Twi n Tube CFL Li ght Sour ce

Pr ovi de T4 Twi n Tube CFL l i ght sour ces wi t h f our pi n, G24q base, r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s, and wi t h an aver age r at ed l i f e of 17, 00 hour s.

2. 4. 2. 2. 3 T4 Tr i pl e Tube CFL Li ght Sour ce

Pr ovi de T4 Tr i pl e Tube CFL l i ght sour ces wi t h f our pi n, GX24q base, r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s, and wi t h an aver age r at ed l i f e of 17, 000 hour s.

2. 4. 2. 2. 4 T4 Quad Tube CFL Li ght Sour ce

Pr ovi de T4 Quad Tube CFL l i ght sour ces wi t h f our pi n, GX24q base, r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s, and wi t h an aver age r at ed l i f e of 17, 000 hour s.

2. 4. 3 HI D Li ght Sour ces

ANSI C78. 389. Li ght sour ces must be compl i ant wi t h t he most cur r ent TCLP t est pr ocedur e per NEMA C78. LL 3 at t he t i me of manuf act ur e.

2. 4. 3. 1 Met al Hal i de Li ght Sour ces

ANSI ANSLG C78. 43. Ut i l i ze onl y pr ot ect ed t ype l i ght sour ces i n open l umi nai r es. Li ght sour ces must be speci f i cal l y sui t ed t o oper at e i n t he bur ni ng posi t i on whi ch t hey ar e i nst al l ed, and have t he f ol l owi ng requirements:

a. Pul se- st ar t , quar t z met al hal i de l i ght sour ces ut i l i z i ng an ED28 t ype, c l ear gl ass envel ope; E39 mogul base; r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s; mi ni mum CRI of 62; CCT of 4000 degr ees K; wi t h a mi ni mum aver age r at ed l i f e of 20, 000 hour s.

b. Pul se- st ar t , cer ami c met al hal i de l i ght sour ces ut i l i z i ng a ( an) ED23. 5 t ype, c l ear coat ed gl ass envel ope; E26base; r at ed wat t s and i ni t i al l umens as i ndi cat ed i n t he cont r act document s; mi ni mum CRI of 80; CCT of 4000 degr ees K; wi t h mi ni mum r at ed l i f e of 15, 000 hour s.

2. 5 LI GHTI NG CONTROLS

ASHRAE 90. 1 - I P ASHRAE 189. 1.

2. 5. 1 Toggl e Swi t ches

Pr ovi de l i ne- vol t age t oggl e swi t ches as speci f i ed i n Sect i on 26 20 00

Apr i l 2019 Page 15 SECTI ON 26 51 00

I NTERI OR DI STRI BUTI ON SYSTEM.

2. 5. 2 Di mmi ng Cont r ol l er s ( Di mmer s)

UL 1472, UL 20, I EEE C62. 41, NEMA SSL 7A. 120/ 277 V and 0- 10 V di mmer s must pr ovi de f l i cker - f r ee, cont i nuousl y var i abl e l i ght out put t hr oughout t he di mmi ng r ange. Pr ovi de r adi o f r equency i nt er f er ence suppr essi on i nt egr al t o devi ce. Pr ovi de di mmer s ut i l i z i ng const ant cur r ent r educt i on ( CCR) t echnol ogy. Pr ovi de devi ce wi t h a ver t i cal s l i der , paddl e, r ot ar y but t on, or t oggl e ( wi t h adj acent ver t i cal s l i der ) t ype cont r ol , wi t h f i ni sh t o mat ch swi t ches and out l et s i n same ar ea. Pr ovi de back box i n wal l wi t h suf f i c i ent dept h t o accomodat e body of swi t ch and wi r i ng.

Devi ces must be capabl e of oper at i ng at t hei r f ul l r at ed capaci t y r egar dl ess of bei ng si ngl e or ganged- mount ed, and be compat i bl e wi t h t hr ee- way and f our - way swi t chi ng scenar i os. Di mmer s must be capabl e of cont r ol l i ng t wo- wi r e, t hr ee- wi r e, or 0- 10 vol t f l uor escent bal l ast s or LED dr i ver s, as i ndi cat ed i n t he cont r act document s. Ensur e compat i bi l i t y of di mmer wi t h separ at e power packs when ut i l i zed f or l i ght i ng cont r ol .

Di mmer s and t he bal l ast s or dr i ver s t hey cont r ol , must be pr ovi ded f r om t he same manuf act ur er , or t est ed and cer t i f i ed as compat i bl e f or use t oget her . Pr ovi de NEMA SSL 7A- compi ant devi ces.

2. 5. 3 Sensor s f or Li ght i ng Cont r ol

I EEE C62. 41, NEMA WD 1, UL 94, UL 916, UL 508, ASTM D4674 REV A.

2. 5. 3. 1 Occupancy Sensor s

Pr ovi de occupancy sensor s wi t h cover age pat t er ns as i ndi cat ed on pr oj ect pl ans. Pr ovi de no l ess quant i t y of sensor s as shown on pl ans, but add addi t i onal sensor s when r equi r ed t o f ul f i l l cover age r equi r ement f or t he speci f i c model sensor pr ovi ded. Sensor must be pr ovi ded wi t h an adapt i ve l ear ni ng f unct i on t hat aut omat i cal l y set s sensor i n opt i mum cal i br at i on i n a set per i od of t i me af t er i nst al l at i on and a non- vol at i l e memor y t hat saves set t i ngs af t er a power out age. Pr ovi de sensor s desi gned f or cei l i ng, wal l or wal l - box i nst al l at i on as i ndi cat ed. Oper at i ng vol t age must be 120/ 277 vol t s. Al t er nat el y, oper at i ng vol t age must be 24V i n conj unct i on wi t h a cont r ol syst em or separ at e power pack whi ch i nt er act s wi t h l umi nai r e bei ng cont r ol l l ed. Pr ovi de housi ng of hi gh- i mpact , i nj ect i on- mol ded t her mopl ast i c wi t h a mul t i - segment ed l ens f or PI R and dual t echnol ogy sensor s. Sensor oper at i on r equi r es movement t o act i vat e l umi nai r es cont r ol l ed, and t ur ns l umi nai r es of f af t er a set t i me of i nact i v i t y. Pr ovi de i nt egr al phot ocel l mount ed i n occupancy sensor housi ng when i ndi cat ed.

2. 5. 3. 1. 1 Passi ve I nf r ar ed ( PI R) Sensor s

Pr ovi de cei l i ng or wal l - mount ed PI R sensor s meet i ng t he f ol l owi ng requirements:

a. Temper at ur e compensat ed, dual el ement sensor and a mul t i - el ement f r esnel l ens ( Pol y I R4 mat er i al ) .

b. Technol ogy t o opt i mi ze aut omat i c t i me del ay t o f i t occupant usage patterns.

c. No mi ni mum l oad r equi r ement f or l i ne vol t age sensor s and be capabl e of swi t chi ng f r om zer o t o 800 W at 120 VAC, 50/ 60 Hz and f r om zer o t o 1200 W at 277 VAC, 50/ 60 Hz. Cont r ol vol t age sensor s must not exceed a

Apr i l 2019 Page 16 SECTI ON 26 51 00 maxi mum l oad r equi r ement of 20 mA at 24VDC.

d. Ti me del ay of f i ve t o 30 mi nut es i n i ncr ement s of f i ve mi nut es wi t h a wal k t hr ough and t est mode set by DI P swi t ch.

e. LED i ndi cat or t hat r emai ns act i ve dur i ng occupancy.

f . Bui l t - i n l i ght l evel sensor t hat i s oper at i onal f r om 8 t o 180 foot-candles.

g. Cover age pat t er n t est ed t o NEMA WD 7 st andar ds.

h. St andar d f i ve year war r ant y and be UL l i s t ed i . No l eakage cur r ent t o l oad when i n t he of f mode.

2. 5. 3. 1. 2 Ul t r asoni c Sensor s

Pr ovi de cei l i ng- mount ed ul t r asoni c sensor s meet i ng t he f ol l owi ng requirements:

a. Oper at e at an ul t r asoni c f r equency of 25 kHz.

b. LED on ext er i or of devi ce t o i ndi cat e occupant det ect i on.

c. Adj ust abl e t i me del ay per i od of 15 seconds t o 15 mi nut es.

d. UL l i s t ed wi t h mi ni mum f i ve year war r ant y.

e. When i ndi cat ed i n t he cont r act document s, pr ovi de wi t h i sol at ed r el ay f or i nt egr at i ng cont r ol of HVAC or ot her aut omat ed syst ems.

2. 5. 3. 1. 3 Dual Technol ogy Sensor s

Pr ovi de dual t echnol ogy sensor s t hat meet t he r equi r ement s f or PI R sensor s and ul t r asoni c sensor s i ndi cat ed above. I f ei t her t he passi ve i nf r ar ed or ul t r asoni c sensi ng r egi st er s occupancy, t he l umi nai r es must r emai n on.

2. 5. 3. 1. 4 Hi gh/ Low- Bay Sensor s

Pr ovi de occupancy sensor s speci f i cal l y desi gned f or hi gh/ l ow- bay mount i ng appl i cat i on usi ng passi ve i nf r ar ed ( PI R) t echnol ogy, wi t h t he f ol l owi ng characteristics:

a. I nput vol t age of 120/ 277 vol t s, at 50/ 60 her t z.

b. Hi gh- i mpact , i nj ect i on- mol ded t her mopl ast i c housi ng wi t h i nt er changabl e l enses f or 360 degr ee open ar ea cover age or nar r ow r ect angul ar , war ehouse ai s l e cover age.

c. Ut i l i ze zer o- cr ossi ng ci r cui t r y t o pr event damage f r om hi gh i nr ush cur r ent and t o pr omot e l ong l i f e oper at i on.

d. Be desi gned t o mount di r ect l y t o or adj acent t o hi gh or l ow- bay luminaires.

e. UL l i s t ed, CEC Ti t l e 24 and ASHRAE 90. 1 - I P compl i ant .

Apr i l 2019 Page 17 SECTI ON 26 51 00

2. 5. 3. 1. 5 Power Packs f or Sensor s

UL 2043, CEC Ti t l e 24, ASHRAE 90. 1 - I P. Power packs used t o pr ovi de power t o one or mor e l i ght i ng cont r ol sensor s must meet t he f ol l owi ng requirements:

a. I nput vol t age - 120- 277 VAC; out put vol t age - 24 VDC at 225 mA.

b. Pl enum- r at ed, hi gh- i mpact t her mopl ast i c encl osur e.

c. Ut i l i zes zer o- cr ossi ng ci r cui t r y t o pr event damage f r om i nr ush cur r ent .

d. Maxi mum l oad r at i ng of 16 amps f or el ect r oni c l i ght i ng l oads.

e. RoHS compl i ant .

2. 5. 3. 2 Vacancy Sensor s

Pr ovi de vacancy sensor s as i ndi cat ed above under par agr aph OCCUPANCY SENSORS, but wi t h r equi r ement of a manual oper at i on t o act i vat e l umi nai r es cont r ol l ed. Pr ovi de aut omat i c oper at i on t o t ur n l umi nai r es of f af t er a set per i od of i nact i v i t y.

2. 5. 4 Li ght i ng Cont act or

NEMA I CS 2. Pr ovi de an mechani cal l y- hel d l i ght i ng cont act or housed i n a encl osur e conf or mi ng t o NEMA I CS 6, sui t abl e t o t he envi r onment or as i ndi cat ed i n t he cont r act docuent s. Pr ovi de cont act or wi t h nor mal l y- open( NO) , s i ngl e pol e cont act s, r at ed 600 vol t s, 30 amps.

Pr ovi de coi l oper at i ng vol t age as i ndi cat ed i n t he cont r act document s.

2. 5. 5 Timeswitch

UL 917.

Pr ovi de el ect r oni c t ype t i meswi t ch wi t h a 24 hour - 7 day ast r onomi c pr ogr ammi ng f unct i on t hat changes on/ of f set t i ngs accor di ng t o seasonal var i at i ons of sunset and sunr i se, pr ovi di ng a t ot al of 56 on/ of f set poi nt s. Pr ovi de 24 hour t ype di gi t al c l ock di spl ay f or mat . Pr ovi de power out age back- up f or swi t ch f or a mi ni mum of seven days. Pr ovi de swi t ch capabl e of cont r ol l i ng a mi ni mum of 4 channel s or l oads. Rat e cont act s at 30 amps at 120/ 277 vol t s f or gener al pur pose l oads. Pr ovi de cont act s as appr opr i at e t o t he appl i cat i on. Pr ovi de swi t ch wi t h f unct i on t hat al l ows aut omat i c cont r ol t o be ski pped on cer t ai n sel ect ed days of t he week, manual bypass or r emot e over r i se cont r ol , dayl i ght savi ngs t i me adj ust ment , moment ar y f unct i on f or out put cont act s, and abi l i t y f or phot osensor i nput .

House t i meswi t ch i n a sur f ace- mount ed, l ockabl e, NEMA 1 encl osur e const r uct ed of pai nt ed st eel or pl ast i c pol ymer conf or mi ng t o NEMA I CS 6.

2. 5. 6 Li ght i ng Cont r ol Panel

Pr ovi de an el ect r oni c, pr ogr ammabl e l i ght i ng cont r ol panel , capabl e of pr ovi di ng l i ght i ng cont r ol wi t h i nput f r om i nt er nal pr ogr ammi ng, di gi t al swi t ches, t i me cl ocks, and ot her l ow- vol t age cont r ol devi ces.

Encl ose panel har dwar e i n a sur f ace or f l ush- mount ed, NEMA 1 or 3R, pai nt ed, st eel encl osur e, wi t h hi nged, l ockabl e access door and vent i l at i on openi ngs, as speci f i ed. I nt er nal l ow- vol t age compar t ment must

Apr i l 2019 Page 18 SECTI ON 26 51 00 be separ at ed f r om l i ne- vol t age compar t ment of encl osur e wi t h onl y l ow- vol t age compar t ment accessi bl e upon openi ng of door .

I nput vol t age - 120/ 277 V, 60 Hz, wi t h i nt er nal 24 VDC power suppl y.

Pr ovi de number or s i ngl e- pol e l at chi ng r el ays r at ed at 20 or 30 amps, 120 or 277 vol t s, as speci f i ed.

Rel ay cont r ol modul e must oper at e at 24 VDC and be r at ed t o cont r ol a mi ni mum of speci f i ed r el ays.

2. 6 EXI T AND EMERGENCY LI GHTI NG EQUI PMENT

UL 924, NFPA 101, and NFPA 70 compl i ant .

2. 6. 1 Exi t Si gns

Pr ovi de exi t s i gns consumi ng a maxi mum of f i ve wat t s t ot al .

2. 6. 1. 1 LED Sel f - Power ed Exi t Si gns

Pr ovi de i n UV- st abl e, t her mo- pl ast i c or pai nt ed, di e- cast al umi num housi ng wi t h UL damp l abel or UL wet l abel ( when i ndi cat ed) , conf i gur ed f or uni ver sal mount i ng, as speci f i ed. Pr ovi de 6 i nch hi gh, 3/ 4 i nch st r oke r ed l et t er i ng on f ace of s i gn. Pr ovi de chevr ons on ei t her s i de of l et t er i ng t o i ndi cat e di r ect i on. Pr ovi de wi t h number of f aces as i ndi cat ed i n cont r act document s. Equi p wi t h aut omat i c power f ai l ur e devi ce, t est swi t ch, and pi l ot l i ght , and f ul l y aut omat i c hi gh/ l ow t r i ckl e char ger i n a sel f - cont ai ned power pack. Bat t er y must be seal ed, mai nt enance f r ee ni ckel - cadmi um t ype, and must oper at e unat t ended f or a per i od of not l ess t han f i ve year s. Emer gency r un t i me must be a mi ni mum of 1 1/ 2 hour s.

LEDs must have a mi ni mum r at ed l i f e of 10 year s. Pr ovi de sel f - di agnost i c c i r cui t r y i nt egr al t o emer gency LED dr i ver .

2. 6. 2 LED Emer gency Dr i ver s

Pr ovi de LED emer gency dr i ver wi t h aut omat i c power f ai l ur e det ect i on, t est swi t ch and LED i ndi cat or ( or combi nat i on swi t ch/ i ndi cat or ) l ocat ed on l umi nai r e ext er i or , and f ul l y- aut omat i c sol i d- st at e char ger , bat t er y and i nver t er i nt egr al t o a sel f - cont ai ned housi ng. Pr ovi de sel f - di agnost i c f unct i on i nt egr al t o emer gency dr i ver . I nt egr al ni ckel - cadmi um bat t er y i s r equi r ed t o suppl y a mi ni mum of 90 mi nut es of emer gency power at 10 wat t s, 10- 50 VDC compat i bl e wi t h LED f or war d vol t age r equi r ement s, const ant out put . Dr i ver must be RoHS compl i ant , r at ed f or i nst al l at i on i n pl enum- r at ed spaces and damp l ocat i ons, and be war r ant ed f or a mi ni mum of f i ve year s.

2. 6. 3 Fl uor escent Emer gency Bal l ast s

Pr ovi de each ' syst em' wi t h an aut omat i c power f ai l ur e devi ce, t est swi t ch oper abl e f r om t he ext er i or of t he l umi nai r e ( or r emot el y) , a pi l ot l i ght v i s i bl e f r om t he ext er i or of t he l umi nai r e, and f ul l y aut omat i c sol i d- st at e char ger , bat t er y, and i nver t er i nt egr al t o a sel f - cont ai ned housi ng. Pr ovi de sel f - di agnost i c f unct i on i nt egr al t o emer gency bal l ast .

I nt egr al ni ckel - cadmi um bat t er y i s r equi r ed t o suppl y a mi ni mum of 90 mi nut es of emer gency power t o one l i ght sour ce wi t hi n l umi nai r e at a mi ni mum of 1200 l umens out put . Pr ovi de open- ci r cui t pr ot ect i on and t i me- del ay f unct i on t o count er act ' end- of - l i f e' c i r cui t r y i n nor mal power bal l ast f r om i nt er f er i ng wi t h emer gency bal l ast oper at i on. Bal l ast must

Apr i l 2019 Page 19 SECTI ON 26 51 00 be RoHS compl i ant , r at ed f or i nst al l at i on i n pl enum- r at ed spaces and damp l ocat i ons, and be war r ant ed f or a mi ni mum of f i ve year s.

2. 6. 4 Sel f - Di agnost i c Ci r cui t r y f or LED and Fl uor escent Emer gency Drivers/Ballasts

Pr ovi de emer gency l i ght i ng uni t wi t h f ul l y- aut omat i c, i nt egr al sel f - t est i ng/ di agnost i c el ect r oni c c i r cui t r y. Ci r cui t r y must pr ovi de f or a one mi nut e di agnost i c t est ever y 28 days, and a 30 mi nut e di agnost i c t est ever y s i x mont hs, mi ni mum. Any mal f unct i on of t he uni t must be i ndi cat ed by LED( s) v i s i bl e f r om t he ext er i or of t he l umi nai r e. A manual t est swi t ch must al so be pr ovi ded t o per f or m a di agnost i c t est at any gi ven t i me.

2. 7 LUMI NAI RE SUPPORT HARDWARE

2. 7. 1 Wire

ASTM A641/ A641M; Gal vani zed, sof t t emper ed st eel , mi ni mum 0. 11 i nches i n di amet er , or gal vani zed, br ai ded st eel , mi ni mum 0. 08 i nches i n di amet er .

2. 7. 2 Wi r e f or Humi d Spaces

ASTM A580/ A580M; Composi t i on 302 or 304, anneal ed st ai nl ess st eel , mi ni mum

0. 11 i nches i n di amet er .

ASTM B164; UNS NO4400, anneal ed ni ckel - copper al l oy, mi ni mum 0. 11 i nches i n di amet er .

2. 7. 3 Thr eaded Rods

Thr eaded st eel r ods, 3/ 16 i nch di amet er , z i nc or cadmi um coat ed.

2. 7. 4 Straps

Gal vani zed st eel , one by 3/ 16 i nch, conf or mi ng t o ASTM A653/ A653M, wi t h a l i ght commer ci al z i nc coat i ng or ASTM A1008/ A1008M wi t h an el ect r odeposi t ed z i nc coat i ng conf or mi ng t o ASTM B633, Type RS.

2. 8 POWER HOOK LUMI NAI RE HANGERS

UL 1598 Pr ovi de an assembl y consi st i ng of t hr ough- wi r ed power hook housi ng, i nt er l ocki ng pl ug and r ecept acl e, power cor d, and l umi nai r e suppor t l oop. Power hook housi ng must be cast al umi num havi ng t wo 3/ 4 i nch t hr eaded hubs. Suppor t hook must have saf et y scr ew. Fi xt ur e suppor t l oop must be cast al umi num wi t h pr ovi s i ons f or accept i ng 3/ 4 i nch t hr eaded st ems. Power cor d must i ncl ude 16 i nches of 3 conduct or No. 16 Type SO cor d. Assembl y must be r at ed 120 vol t s or 277 vol t s, 15 amper es.

2. 9 EQUI PMENT I DENTI FI CATI ON

2. 9. 1 Manuf act ur er ' s Nampl at e

Each i t em of equi pment must have a namepl at e bear i ng t he manuf act ur er ' s name, addr ess, model number , and ser i al number secur el y af f i xed i n a conspi cuous pl ace; t he namepl at e of t he di st r i but i ng agent wi l l not be acceptable.

Apr i l 2019 Page 20 SECTI ON 26 51 00

2. 9. 2 Labels

Pr ovi de l abel ed l umi nai r es i n accor dance wi t h UL 1598 r equi r ement s. Al l l umi nai r es must be cl ear l y mar ked f or oper at i on of speci f i c l i ght sour ces and bal l ast s, gener at or s or dr i ver s. Not e t he f ol l owi ng l i ght sour ce char act er i st i cs i n t he f or mat " Use Onl y _____" :

a. Li ght sour ce di amet er code ( T- 4, T- 5, T- 8) , t ube conf i gur at i on ( t wi n, quad, t r i pl e) , base t…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .