Wet Lab Conveyor System Parts Manual.pdf

PDF 692 KB Posted

Attached to
DORFP 1305M224R0041 – NOAA Ship Henry Bigelow FY25 Dockside Repairs
Solicitation number
1305M224R0041
Issued by

About this file

Written by GovTribe AI ·

This document is a spare parts manual for equipment provided by Carsoe US for a federal contract job (Job 15732) for the National Oceanic and Atmospheric Administration (NOAA). The manual includes detailed drawings and part numbers for various conveyor system components, such as modular belts, sprockets, drum motors, bearings, and other replacement parts. It provides guidance on ordering spare parts, including the required information to ensure expedient delivery. The manual also includes warranty information, noting that Carsoe US cannot be held responsible for injuries, malfunctions, or damage to machines provided by a third party.

The related federal contract opportunity is for NOAA Ship Henry Bigelow FY25 Dockside Repairs, solicitation number 1305M224R0041. This is a special notice for the NOAA Region 1 Dockside Repair and Ship Maintenance Indefinite Delivery, Indefinite Quantity (IDIQ) Contract Holders only. The attached references, drawings, and manuals are provided for this contract opportunity.

View the file

Other files

File Type Posted
Immersion Suit Inventory (05-2-24).xlsx XLSX spreadsheet
HB-167-002 Wet Lab Door Modification REV A - Approved_143748972.pdf PDF
HB-583-03 (FRV40-225-093-010) Rescue Boat Handling System.pdf PDF
00 51 21.01 Vent Duct Cleaning.pdf PDF
HB-085 FF01 Insulation Arrangement.pdf PDF
Bigelow 2024 GMDSS Inspection Certificates.pdf PDF
3-ZF 63 Marine Propulsion Systems Operator_s Manual.pdf PDF
Steering Gear Handwheel Pump H330 and Piping Drawings.pdf PDF
HB-512 FV02 HVAC Diagram.pdf PDF
DWG MOCA-HB-434A-02 INSTALLATION Rev B (As Built).pdf PDF
Carsoe REPORT No 2 Conveyor Overhaul.pdf PDF
HB-631 FF04 Paint Schedule r1.0.pdf PDF
HB-170 FH22 Mast Rigging Flagstaff Layout Details.pdf PDF
DWG MOCA-HB-434A-02 INSTALLATION Rev C (New System).pdf PDF
HB-801 FC05 Tank Capacity Curves.pdf PDF
HB-167-001 Hydro Lab Door Modification REV A - Approved_143742608.pdf PDF
MarineTuff - Cat6 Cable Specification.pdf PDF
Immersion Suit Pressure Testing.pdf PDF
2-Volvo Penta D3 Operator_s Manual.pdf PDF
HB-985 FA05 Fire Control Plan.pdf PDF
SECNAV FORM 5512-NSNPT - JUL 2023 - HIGHLIGHTED.pdf PDF
Installation Guide TracVision UHD7 SWM Expansion Kit.pdf PDF
OLEX processor location and dimensions.pdf PDF
15732 Henry Bigelow_Lab Manual.pdf PDF
SECNAV FORM 5512 - Quick Guide.pdf PDF
HB-568 PE32 Bow Thruster Control System Terminal List.pdf PDF
Newport Naval Station Base Access Map.pdf PDF
New KVH UDH-7 and old Intellian HD6 Antenna footprint.pdf PDF
MOC-631-2D Coating Systems for Steel Surfaces.pdf PDF
4-HJ-274 Water Jet Installation and Service Manual.pdf PDF
FRV40-226-008-010 Bow Thruster Model 40 T3S.zip ZIP file
HB-506 FP02 Vents Sounds System Diagram.pdf PDF
HB-085 FA02 General Arrangements.pdf PDF
HVAC Systems for Duct Cleaning (04-25-24).xlsx XLSX spreadsheet
AMC-583-1B General Requirements for Liferaft Inspections.pdf PDF
Installation Guide - TracVision UDH7 - 54-1308_UHD7_IG.pdf PDF
00 00 01.07 General Requirements.pdf PDF
FRV40-225-058-010 Motor Propulsion DC.pdf PDF
Bigelow Direct TV Box Inventory March 2024.xlsx XLSX spreadsheet
Newport Naval Station-Pier 2 Load Restrictions 7-15-19.pdf PDF
Bow Thruster HMI Cutout Pictures.pdf PDF
IEEE 45 Recommended Practice for Electrical Installations on Shipboard.pdf PDF
HB Fire System Inventory (05-3-24).xlsx XLSX spreadsheet
Rescue Boat Manual - 670 SOLAS - Willard Marine.zip ZIP file
Siemens Report - How to built a NOAA SPDM.pdf PDF
HB-512 FV04 Fan List.pdf PDF
HB-561 02 (FRV40-225-128-010) Steering Gear Model 1xSR662.pdf PDF
HB Fire System Inspection Report - FEB 2024.pdf PDF
13603 Manual Complete.pdf PDF
Show all 49

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Spare Parts Manual Oak Management Inc.

Henry B Bigelow Job: 15732

About this Spare Part Manual.

This Spare Part Manual is intended to assist you in replacing spare parts for equipment provided by Carnitech US in 2006 for Job: 15732.

Customer Support For customer support please email spareparts-us@carsoe.com

Warranty Information For specific warranty information, please consult the written contract of the purchase. Carsoe US cannot be held responsible for injuries to persons, malfunctions of the machine or damage to machines provided by a 3rd party.

Note Carsoe US Inc. does not warranty any equipment that has not been used according to specifications and provided by Carsoe US.

Ordering Spare Parts To ensure expedient supply of ordered spare parts, please specify the following when placing an order:

Order No./Job No.

Position No. of the piece of machinery the spare parts are for.

Item No. of the spare part.

Name and type of spare part.

Quantity of requested spare parts.

Delivery address.

Invoice address.

Your phone/ fax No.

Our address:

Carsoe US Inc.

1080 W. Ewing Place Seattle, WA 98119 U.S.A.

Tel.: +1 (206) 717-0147 Fax: +1 (206) 783-1885 E-mail: spareparts-us@carsoe.com

Note Some parts such as Motors, Gear Motors, and Cylinders, can have a very long delivery time, approx.

6 to 12 weeks.

Spare Part Drawings for Holding Tank with (3) Openings

Spare Parts Table for Holding Tank with (3) Openings

24” wide Modular Belt Double Knuckle Conveyor

24” wide Modular Belt Double Knuckle Conveyor

24” wide Modular Plastic ConveyorDwg: 02D-02-0349-01-0, Job:15732, Pos: 4

24” wide Modular Plastic ConveyorDwg: 02D-02-0349-01-0, Job:15732, Pos: 4 POS Item No. Description QTY UNIT

1 40969 24” Wide Modular belt L=11’ 1 EA 2 18303 Sprocket 6T 4.5” PD 1.5” SQ Bore 5 EA 3 40976 Idle Shaft 1 EA 4 11039 Bearing 206 Closed 2 EA 5 MOD Clamp plate (cut 10mm off top) 2 EA 6 10439 Retaining Ring 1.5” SQ 10 EA 7 40962 Drum Motor HP: 1 EA 8 23973 Bushing Blue #9/16-5B 2 EA 9 26244 End Plug 2 EA

10 26248 Bushing Adapter 2 EA 11 26190 Tube Round SS 1-1/2”x16 GA (return roller) 2 FT 12 40985 Belt Guard 10’ LG 1 EA 13 41047 Take-up Bracket 2 EA

24” wide Modular Belt Sorting ConveyorDwg: 02D-02-0344-02-0, Job:15732, Pos: 6

24” wide Modular Belt Sorting ConveyorDwg: 02D-02-0344-02-0, Job:15732, Pos: 6

POS Item No. Description QTY UNIT

1 30-301-40970 MODULAR BELT FLAT TOP 24” x 41’-0” LONG 1 EA

2 30-305-NS0816 SPROCKET 20TH, PD 3.8”, SQ.BORE 14 EA

3 20-203-40963 DRUM MOTOR HP:0.34 1 EA

4 057-5701-11039 BEARING 206 CLOSED CAP. 4 EA

5 061-6103-10855 SQUARE CLAMP PLATE 206 4 EA

6 056-5602-40979 IDLE SHAFT (“A”=715, “TL”=811) 2 EA

7 70-703-10439 RETAINING RING SQ.1.5” 28 EA

8 60-602-26244 END PLUG (RALPH PUGH) 6 EA

9 60-602-26248 BUSHING ADAPTER (RALPH PUGH) 6 EA

10 60-602-23973 BUSHING BLUE #9/16-5B (RALPH PUGH) 6 EA

11 10-102-26190 ROUND TUBE SS 1.5”x16GA @ 2’LONG 3 EA

12 056-5602-40981 TAKE-UP SHAFT FOR CENTER DRIVE 2 EA

13 002-0203-40984 IDLE PULLEY FOR CENTER DRIVE 2 EA

14 061-6104-40991 TAKE-UP FOR CENTER DRIVE 2 EA

15 061-6103-40993 CLAMP PLATE FOR CENTER DRIVE 2 EA

16 60-602-30304 2-BOLT FLANGE BEARING 20mm 4 EA

17 002-0204-40987 UHMW DOOR 1 EA

18 002-0204-40988 SPACER, DETAIL “1” FOR SIDE ROLLER 10 EA

19 002-0204-40989 SPACER, DETAIL “2” FOR SIDE ROLLER 9 EA

20 002-0204-40990 COMPLETE ROLLER FOR ROLLER CONVEYOR 40 EA

18” wide Modular Belt Basket ConveyorDwg: 02D-02-0344-04-0, Job:15732, Pos: 8

18” wide Modular Belt Basket ConveyorDwg: 02D-02-0344-04-0, Job:15732, Pos: 8

POS Item No. Description QTY UNIT

1 30-301-40971 MODULAR BELT FLAT TOP 18” x 41’-0” LONG 1 EA

2 30-305-NS0816 SPROCKET 20TH, PD 3.8”, SQ.BORE 5 EA

3 20-203-40964 DRUM MOTOR HP:0.34 1 EA

4 057-5701-11039 BEARING 206 CLOSED CAP. 2 EA

5 061-6103-10855 SQUARE CLAMP PLATE 206 2 EA

6 056-5602-40979 IDLE SHAFT (“A”=479, “TL”=575) 1 EA

7 70-703-10439 RETAINING RING SQ.1.5” 10 EA

8 60-602-26244 END PLUG (RALPH PUGH) 12 EA

9 60-602-26248 BUSHING ADAPTER (RALPH PUGH) 12 EA

10 60-602-23973 BUSHING BLUE #9/16-5B (RALPH PUGH) 12 EA

11 10-102-26190 ROUND TUBE SS 1.5”x16GA @ 1.6’LONG 6 EA

Basket Elevator

Basket Elevator

18” wide Modular Belt Offal ConveyorDwg: 02D-02-0348-02-0, Job:15732, Pos: 10

18” wide Modular Belt Offal ConveyorDwg: 02D-02-0348-02-0, Job:15732, Pos: 10

POS Item No. Description QTY UNIT

1 30-301-40972 MODULAR BELT FLAT TOP 18” x 43’-0” LONG 1 EA

2 30-305-NS0816 SPROCKET 20TH, PD 3.8”, SQ.BORE 5 EA

3 20-203-40964 DRUM MOTOR HP:0.34 1 EA

4 057-5701-11039 BEARING 206 CLOSED CAP. 2 EA

5 061-6103-10855 SQUARE CLAMP PLATE 206 2 EA

6 056-5602-40978 IDLE SHAFT (“A”=479, “TL”=577) 1 EA

7 70-703-10439 RETAINING RING SQ.1.5” 10 EA

8 60-602-26244 END PLUG (RALPH PUGH) 14 EA

9 60-602-26248 BUSHING ADAPTER (RALPH PUGH) 14 EA

10 60-602-23973 BUSHING BLUE #9/16-5B (RALPH PUGH) 14 EA

11 10-102-26190 ROUND TUBE SS 1.5”x16GA @ 1.6’LONG 7 EA

Inspection Table with Scissor Lift Dwg: 22D-50-0206-01-0, Job:15732, Pos: 11

Inspection Table with Scissor Lift Dwg: 22D-50-0206-01-0, Job:15732, Pos: 11

POS Item No. Description QTY UNIT

1 60-604-11465 HYDRAULIC CYLINDER SR20 1 EA

2 70-703-18793 RETAINING RING, EXTERNAL 2 EA

3 041-4114-39220 2” SPACER 2 EA

4 041-4114-40702 2” BUSHING 4 EA

5 041-4114-40492 SMALL WHEEL 2 EA

6 041-4114-41008 LARGE WHEEL 2 EA

7 041-4114-41009 1 ¼” BUSHING 4 EA

8 041-4114-41010 PIN FOR CYLINDER 1 EA

9 041-4114-41011 PIVOT SHAFT FOR CYLINDER 1 EA

10 041-4114-41018 SPACER 1 ½” 2 EA

11 041-4114-41033 LONG SHAFT 2 EA

12 041-4114-41034 SHORT SHAFT 2 EA

16” wide Modular Belt Offal ConveyorDwg: 02D-02-0348-03-0, Job:15732, Pos: 12

16” wide Modular Belt Offal ConveyorDwg: 02D-02-0348-03-0, Job:15732, Pos: 12

POS Item No. Description QTY UNIT

1 30-301-40973 MODULAR BELT FLAT TOP 16” x 33’-0” LONG 1 EA

2 30-305-NS0816 SPROCKET 20TH, PD 3.8”, SQ.BORE 10 EA

3 20-203-40965 DRUM MOTOR HP:0.34 1 EA

4 057-5701-11039 BEARING 206 CLOSED CAP. 4 EA

5 061-6103-10855 SQUARE CLAMP PLATE 206 4 EA

6 056-5602-40977 IDLE SHAFT (“A”=511, “TL”=609) 2 EA

7 70-703-10439 RETAINING RING SQ.1.5” 20 EA

8 60-602-26244 END PLUG (RALPH PUGH) 8 EA

9 60-602-26248 BUSHING ADAPTER (RALPH PUGH) 8 EA

10 60-602-23973 BUSHING BLUE #9/16-5B (RALPH PUGH) 8 EA

11 10-102-26190 ROUND TUBE SS 1.5”x16GA @ 1.4’LONG 4 EA

12 056-5602-40980 TAKE-UP SHAFT FOR CENTER DRIVE 2 EA

13 002-0203-40982 IDLE PULLEY FOR CENTER DRIVE 2 EA

14 061-6104-40991 TAKE-UP FOR CENTER DRIVE 2 EA

15 061-6103-40993 CLAMP PLATE FOR CENTER DRIVE 2 EA

16 60-602-30304 2-BOLT FLANGE BEARING 20mm 4 EA

16” wide Modular Belt Offal ConveyorDwg: 02D-02-0347-01-0, Job:15732, Pos: 13

16” wide Modular Belt Offal ConveyorDwg: 02D-02-0347-01-0, Job:15732, Pos: 13

POS Item No. Description QTY UNIT

1 30-301-40974 MODULAR BELT FLAT TOP 16” x 33’-0” LONG 1 EA

2 30-305-NS0816 SPROCKET 20TH, PD 3.8”, SQ.BORE 10 EA

3 20-203-40965 DRUM MOTOR HP:0.34 1 EA

4 057-5701-11039 BEARING 206 CLOSED CAP. 4 EA

5 061-6103-10855 SQUARE CLAMP PLATE 206 4 EA

6 056-5602-40977 IDLE SHAFT (“A”=511, “TL”=609) 2 EA

7 70-703-10439 RETAINING RING SQ.1.5” 20 EA

8 60-602-26244 END PLUG (RALPH PUGH) 6 EA

9 60-602-26248 BUSHING ADAPTER (RALPH PUGH) 6 EA

10 60-602-23973 BUSHING BLUE #9/16-5B (RALPH PUGH) 6 EA

11 10-102-26190 ROUND TUBE SS 1.5”x16GA @ 1.4’LONG 3 EA

12 056-5602-40980 TAKE-UP SHAFT FOR CENTER DRIVE 2 EA

13 002-0203-40982 IDLE PULLEY FOR CENTER DRIVE 2 EA

14 061-6104-40991 TAKE-UP FOR CENTER DRIVE 2 EA

15 061-6103-40993 CLAMP PLATE FOR CENTER DRIVE 2 EA

16 60-602-30304 2-BOLT FLANGE BEARING 20mm 4 EA

File details come from the government source that posted it. Updated .