Amendment 0002_d - Revised Section 00 01 15 List of Drawings.pdf
PDF 32 KB Posted
- Solicitation number
- W912DS24B0003
About this file
This document is an amendment to the list of drawings for a federal contract opportunity related to maintenance dredging and beach nourishment of the Fire Island Inlet and Shores Westerly to Jones Inlet Beach Erosion Control and Navigation Project in New York.
The key details are: The proposed work involves dredging approximately 700,000 to 1,000,000 CY of sand from the Fire Island Inlet Federal Navigation channel and deposition basin, and placing the dredged sand as nourishment along the designated feeder beach at Gilgo Beach. The dredging and beach nourishment work must be completed within 97 calendar days after the notice to proceed, with a minimum production rate of 13,500 CY per day. The estimated cost range for the project is $15 million to $50 million. Plans and specifications are expected to be available in March 2024, with bid opening in April 2024, and contract award in May 2024. Liquidated damages of $2,390 per day will be assessed for delays.
View the file
Other files
Show 40 more
Latest 50 of 56 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Fire Island Inlet to Jones Inlet, NY-Navigation FIIJI24
SECTION TABLE OF CONTENTS
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS
SECTION 00 01 15
LIST OF DRAWINGS
01/07
PART 1 GENERAL
1.1 SUMMARY
1.2 CONTRACT DRAWINGS, MAPS, AND SPECIFICATIONS
PART 2 PRODUCTS
PART 3 EXECUTION
-- End of Section Table of Contents --
DOCUMENT 00 01 15 Page 1
SECTION 00 01 15
LIST OF DRAWINGS
01/07
PART 1 GENERAL
1.1 SUMMARY
This section lists the drawings for the project pursuant to contract clause "DFARS 252.236-7001, Contract Drawings, Maps and Specifications."
1.2 CONTRACT DRAWINGS, MAPS, AND SPECIFICATIONS
(a) The Government will provide to the Contractor, without charge, one (1) sets of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.
(b) The Contractor shall-
(1) Check all drawings furnished immediately upon receipt;
(2) Compare all drawings and verify the figures before laying out the work;
(3) Promptly notify the Contracting Officer or Contractor Officer's Representative of any discrepancies;
(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and
(5) Reproduce and print contract drawings and specifications as needed.
(c) In general:
(1) Large-scale drawings shall in general govern over small-scale drawings. Information and data provided in contract specifications shall govern over similar information and data specified in contract drawings; and
(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.
(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.
(e) The work shall conform to the following contract drawings and maps, all of which form a part of these specifications and are available in the office of the District Engineer, U.S. Army Corps of
DOCUMENT 00 01 15 Page 2
Engineers, New York District, 26 Federal Plaza, New York, N.Y.
10278-0090:
Contract drawings are as follows:
Fire Island Inlet and Shores Westerly to Jones Inlet, New York Beach Erosion Control and
Navigation Project
- Option : Overlook Beach
SHEET NO. DESCRIPTION
1 COVER & INDEX
2 GENERAL LOCATION MAP AND
DETAILS
3 CHANNEL & DEPOSITION
BASINS - DREDGING
LIMITS & PRISM
4 CHANNEL & DEPOSITION
BASINS - DREDGING
LIMITS & PRISM
5 CHANNEL & DEPOSITION
BASINS - DREDGING
LIMITS & PRISM
6 GENERAL NOTES AND ALIGNMENT
DATA
7 LAYOUT & DESING OF
PLACEMENT AREA
(STA. 0+00 to 26+00)
8 lAYOUT & DESIGN OF
PLACEMENT AREA
(STA. 26+00 to 55+00)
9 LAYOUT & DESIGN OF
PLACEMENT AREA
(STA. 55+00 to 84+00)
DOCUMENT 00 01 15 Page 3
10 LAYOUT & DESIGN OF
PLACEMENT AREA
(STA. 84+00 to 113+00)
11 LAYOUT & DESIGN OF
PLACEMENT AREA
(STA. 113+00 to 142+00)
12 LAYOUT & DESIGN OF
PLACEMENT AREA
(STA. 142+00 to 171+00
13 PLACEMENT AREA
PROFILES
(STA. 3+00 to 27+00)
14 PLACEMENT AREA
PROFILES
(STA. 30+00 to 54+00)
15 PLACEMENT AREA
PROFILES
(STA. 57+00 to 81+00)
16 PLACEMENT AREA
PROFILES
(STA. 84+00 to 108+00)
17 PLACEMENT AREA
PROFILES
(STA. 111+00 to 135+00)
18 PLACEMENT AREA
PROFILES
(STA. 138+00 to 162+00)
OPTION 1
BEACH PLACEMENT AT OVERLOOK
BEACH
1 OP - 1:LEGEND, LAYOUT AND
DESIGN OF PLACEMENT AREA
2 PLACEMENT AREA PROFILE
(12+00 - 15+00)
3 PLACEMENT AREA PROFILE
(16+00 - 19+00)
DOCUMENT 00 01 15 Page 4
(f) The Contractor shall check all drawings furnished to him immediately upon their receipt and shall promptly notify the Contracting Officer or Contracting Officer's Representative of any discrepancies. Figures marked on drawings shall in general be followed in preference to scale measurements unless dimensions are specified.
Large-scale drawings shall in general govern over small-scale drawings. Information and data provided in contract specifications shall govern over similar information and data specified in contract drawings. The Contractor shall compare all drawings and verify the figures before laying out the work and will be responsible for any errors which might have thereby been avoided (DOD FAR Suppl.
52.236-7002).
PART 2 PRODUCTS
Not Used.
PART 3 EXECUTION
Not Used.
-- End of Section --
DOCUMENT 00 01 15 Page 5
File details come from the government source that posted it. Updated .