W912DS-17-R-0001-AMENDMENT_0010.pdf

W912DS-17-R-0001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

a. Revise Specifications

b. Revise the Draw ings Proposal due date remains 17 February 2017 at 2:00 P.M. Eastern Standard Time.

NOTE: Offeror must acknow ledge receipt of this amendment by the date specified in the proposal (or as amended) by one of the follow ing methods: in the space provided on SF1442, by separate letter, or by signing block 15 below . FAILURE TO ACKNOWLEDGE AMENDMENTS BY THE DATE AND TIME SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER IN ACCORDANCE WITH THE SUBMISSION, MODIFICATION, REVISION, AND WITHDRAWAL OF PROPOSALS (FAR 15.208)

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 09-Feb-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912DS-17-R-0001

X 9B. DATED (SEE ITEM 11)

14-Dec-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Feb-2017

CODE

US ARMY CORPS OF ENGINEERS, NEW YORK

26 FEDERAL PLAZA, RM 1843

NEW YORK NY 10278-0090

W912DS 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION 00 73 00 - SPECIAL CONTRACT REQUIREMENTS

The following have been added by full text:

AMENDMENT 0010

FY16 NCO Academy Complex Fort Drum, NY

W921DS-17-R-0001

Amendment 0010

AMENDMENT 0010 to DRAWINGS and SPECIFICATIONS for NCO Academy Complex, Fort Drum, NY.

TO OFFERERS

The following changes shall be made to the drawings and specifications.

DRAWINGS

1. The following DRAWINGS have been REVISED but NOT REISSUED:

- None

2. The following DRAWINGS have been REVISED and REISSUED:

- ET-602

3. The following DRAWINGS have been ADDED:

- None

4. The following DRAWINGS have been DELETED:

- None

SPECIFICATIONS

1. The following SPECIFICATION SECTIONS have been ADDED and are provided in their entirety herein:

- None

2. The following SPECIFICATIONS SECTIONS have been DELETED in their entirety:

- None

3. The following SPECIFICATIONS SECTIONS have been REVISED and REISSUED:

- None

4. The following SPECIFICATIONS have been REVISED but NOT REISSUED:

- Section 28 20 01.00 10, replace paragraph 2.3 in its entirety, with the following paragraphs:

2.3 READER LOCK

This shall be a fully integrated smart locking device with it's own database. It shall have the capability to make all decisions at the device without relying on a separate controller device. The reader / lock shall be able to be installed within the existing door ANSI cut out and require minimal drilling. There shall be no need to rout out the door to drive additional power through any electric transfer hinge. All requirements will be met within the reader / lock itself. In no event shall a wired alternate solution be. The Wireless Reader shall use an AA battery pack; no AC power shall be required at the door. The reader / lock shall also be able to operate as a fully stand alone intelligent device making all the decisions in real time. In the unlikely event that the reader/lock is offline from the host, it shall continue to operate, storing and recording accesses until it is re-connected and back online to the host. The wireless reader/ lock shall be offered in one of four modes.

a. As a self-contained cylindrical reader / lock.

b. As a supplemental quick adapter module to be added to an existing lockset for fire exit devices.

c. As a retrofit kit to be mounted in a double gang box as an upgrade path for a legacy hardwired application to make it wireless.

d. As a wireless access controller interfaced to a hardwired reader and ancillary door devices such as a Request to Exit switch, a Door Switch Monitor and a Door lock sense input.

For cylindrical lock applications the wireless reader shall provide support for an integral Request to Exit (RQE) and Door Switch Monitor (DS).

For mortise lock applications the wireless reader shall provide support for an integral Request to Exit (RQE), Door Switch Monitor (DS), Door Latch Position Switch (LS), and Key Over-ride Sensor (KOS).

For exit device applications the wireless reader shall provide support for an integral Request to Exit (RQE) and Door Switch Monitor (DS).

The reader / lock shall support as a minimum the following "reader" technology:

Up to a 6-digit user defined PIN number between 3 and 6 characters in length.

Support for 125 KHz HID/Wiegand compatible Proximity Cards with variable bit formats such that multiple user defined bit formats can be supported by the reader.

Additionally, the reader shall comply with the following:

As standard, the reader shall support exterior applications.

Each reader/lock shall have battery power to meet 100,000 lock/ transactions.

Each reader lock shall come with a minimum of 2,000 ID capacity, and be able to store locally, if offline, up to 20,000 transactions.

2.3.1 Proximity HID Card Readers

Proximity card readers shall be contactless type, utilizing HID proximity 125Khz, capable of reading HID 125 Khz/ wiegand compatible proximity cards with variable bit formats. Proximity card readers shall use active proximity detection and shall not require contact with the proximity card for proper operation. Active detection proximity card readers shall provide power to compatible credential cards and receive and decode a unique identification code transmitted from the credential card. The card reader shall read proximity cards in a range from 0 to at least 6 inches from the reader. The readers shall have "flash" download capability to accommodate card format changes. The card reader shall have the capability of reading the card data and transmitting the data, or a portion thereof, to the ESS control panel.

2.3.2 HID Proximity Card 125Khz Enrollment Station/Encoder

Provide an HID proximity 125Khz enrollment/encoder station capable of encoding the proximity cards for enrollment. Provide all required enrollment software and hardware required to enroll the HID cards. Provide database management functions for the system and allow an operator to change and modify the data entered into the system as needed. Multiple, password protected access levels are to be provided at the enrollment station.

Provide enrollment station to enroll personnel into, and dis-enroll personnel from, the system database. The enrollment equipment is to only be accessible to authorized entry control enrollment personnel. Provide credential cards for enrollment of personnel, as indicated in paragraph below. Rack mount all enrollment equipment in Office 124 in a lockable cabinet.

2.3.3 HID Proximity Key Cards

Provide one hundred ten (110) HID enrollment proximity key cards to be utilized for this facility. Provide credential cards that are 2-1/8 x 3–3/8 inches. Provide cards that are abrasion resistant and non-flammable. The credit card material must be dimensionally stable so that an undamaged card with deformations resulting from normal use is readable by the card reader. The cards are to be impervious to solar radiation and the effects of ultra-violet light.

(End of Summary of Changes)