Section_J_-_APP_M_-_90-Day_HWAS_Management_Flowchart-rev4APR14.pdf
PDF 515 KB Posted
- Solicitation number
- W912DR-19-R-0015
About this file
This document contains details regarding a federal contract opportunity for environmental remediation services at Fort Belvoir, Virginia. The U.S. Army Corps of Engineers, Baltimore District intends to issue a Request for Proposal numbered W912DR-16-R-0009 on or around July 15, 2016 for environmental remediation services at Fort Belvoir, Virginia. This will be a total small business set aside with a NAICS code of 569210 for Remediation Services, Environmental Remediation and a small business size standard of 500 employees. The contract will be a Single Award Task Order Contract with a base year and four option years and a total capacity of $45 million, with a minimum guarantee of $15,000. Required services include environmental compliance, environmental restoration, environmental conservation, pollution prevention and environmental management activities at Fort Belvoir. The geographic area of coverage is exclusively Fort Belvoir. The Government intends to award the contract by approximately September 2019.
Appendix M 90 Day HWAS Management Flowchart
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ADF East 90‐Day HWAS Management Procedures
Ensure HW packaged in approved, compatible container that is in good condition
Ensure labeled with appropriate label
Inspect weekly using appropriate form
Transfer waste for storage to DPW‐ENRD at Bldg 1495 with 30 days of ASD
Store properly
Segregate incompatible wastes
Ground highly flammable wastes as needed
Keep elevated off floor (i.e., on a pallet)
Keep containers closed unless adding or removing waste
Protect from direct sunlight & inclement weather
Maintain containers in good condition
“ACCUMULATION START
DATE:______“ indicating date container was filled for hazardous waste or date waste first added to container for universal waste and non‐reg waste
Segregate reactive HW from ignitable HW
Segregate acids from caustics
Segregate corrosive HW from flammable HW
Segregate oxidizers from all other wastes
No leaks, dents, corrosion, bulging, noticeable spills
Overpack any leaking containers
Immediately clean up any spills
Ensure turn‐in forms are completed prior to delivering to DPW –ENRD at Bldg 1495
Description of waste
Appoint 90‐Day HWAS Manager and turn in memo to DPW‐ENRD
Receive waste from SAA with turn‐in form/documentation from generator
DPW‐ENRD (703‐806‐
4008 / 703‐806‐4537) will provide guidance on container use
Ensure communication device, spill kit, fire extinguisher, and appropriate PPE are available
Weigh containers and write the weight on the container
Record waste on inventory log
Drums: ensure lugs down and nut against unthreaded lug
Notify DPW‐ENRD of any containers 60 days past accumulation start date
Inspect condition of containers upon receipt
Main 90‐Day HWAS Management Procedures
Ensure waste packaged in approved, compatible container that is in good condition
Ensure labeled with Hazardous Waste
Label
Inspect weekly and when waste is added to 90‐Day HWAS using appropriate form
Ship waste for disposal through DLADS within
90‐days of accumulation start date
Store properly
Segregate incompatible wastes
Ground highly flammable wastes
Keep elevated off floor (i.e., on a pallet)
Keep containers closed unless adding or removing waste
Protect from direct sunlight & inclement weather
Maintain containers in good condition
“ACCUMULATION START
DATE:______“ indicating date container was filled
Segregate reactive HW from ignitable HW
Segregate acids from caustics
Segregate corrosive HW from flammable HW
Segregate oxidizers from all other wastes
No leaks, dents, corrosion, bulging, noticeable spills
Overpack any leaking containers
Immediately clean up any spills
Ensure 1348 completed and turned in to DPW‐
ENRD
Description of waste
Applicable Waste Codes
EPA ID#
Appoint 90‐Day HWAS Manager and turn in memo to DPW‐ENRD
Receive waste from SAA with 1348 from generator
Corrosive (D002) HW should be placed in either a plastic or plastic‐lined drum (no metal)
DPW‐ENRD (703‐806‐
4008) will provide guidance on container use
Ensure communication device, spill kit, and fire extinguisher are available
Weigh containers and write the weight on the container
Record waste on inventory log
Drums: ensure lugs down and nut against unthreaded lug
Notify DPW‐ENRD of any containers 60 days past accumulation start date
Mark manifest number from DLADS on inventory log when waste picked up
Inspect condition of containers upon receipt
File details come from the government source that posted it. Updated .