W9128A-18-B-0002_Am-0006.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

See Continuation Page.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W9128A18B0002

X 9B. DATED (SEE ITEM 11)

01-Feb-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

Am-0006

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

15-May-2018

CODE

CECT - CONTRACTING DIVISION

USACE, HONOLULU DISTRICT

BLDG 252 (CECT-POH)

FT. SHAFTER HI 96858-5440

W9128A 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W9128A18B0002 Am-0006

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

1. CHANGES TO SPECIFICATIONS. Attached hereto are revised pages/paragraphs to the specifications. The revision mark “(Am-0006)” is shown on each revised page.

a. REVISED SECTIONS. The following are revised pages/paragraphs to the solicitation. Changes are marked in

“*” asterisks or indicated in bold.

Standard Form 1442 – Page 1 Section 00 10 00 – Page 3

b. NEW PAGES. The following are new pages to the solicitation.

Section 00 60 00, Appendix A – Requests for Information (#77 through 82)

2. The bid opening date and time is EXTENDED (see SF1442, Page 1, Block 13A).

FY16 MCAF RNMD043004, F-22 Fighter Alert Facility, Joint Base Pearl Harbor-Hickam (JBPHH), Oahu, Hawaii

X

COLIN K WAKI 808-835-4393

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

01-Feb-2018

(RFP)

(IFB)

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance within _______7 calendar days and complete it within ________721 calendar days after receiving award, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________52.211-10

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the work required are due at the place specified in Item 8 by ___________ local time ______________ 14 June 2018 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______ 90 calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

CECT - CONTRACTING DIVISION

USACE, HONOLULU DISTRICT

BLDG 252 (CECT-POH)

FT. SHAFTER HI 96858-5440

W9128A

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

02:00 PM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

FAX: TEL: TEL: FAX:

W9128A18B0002 90

(Am-0006)

W9128A-18-B-0002

Section 00 10 00 – Page 3

e. Section 00 45 00 - Representations & Certifications, Appendix A - SF LLL, Disclosure of Lobbying Activities

9. All Bidders shall provide one (1) copy of the entire bid on a CD within seven (7) calendar days after the date of bid opening.

10. The micropile quantities and the 40 foot length are identified in Drawing S503. If the actual required quantities and lengths, as finally approved by the Contracting Officer or authorized representative, are materially different from what was identified in Drawing S503, the Government will negotiate an equitable adjustment (increase or decrease to the contract price).

Unanticipated conditions encountered during construction may necessitate quantities of work that vary from that shown on the drawings. To minimize delays associated with encountering unanticipated conditions during construction, provide a unit price for each of the following items. If unanticipated conditions are encountered during construction, promptly notify the Contracting Officer that such a condition has been encountered, describe the condition encountered, and provide a listing of which the following items may be necessary. Upon notification, the Contracting Officer will promptly investigate the matter, and if necessary, may issue a Change Order directing the Contractor to proceed with any or all of the required items. Bidders are advised the following unit prices will not be part of the contract, but are a starting point for initiating the change order process.

DESCRIPTION UNIT UNIT PRICE

1) Micropiles – Additional Length LF $___________

2) Micropiles – Omitted Length LF $___________

11. The magnitude of the construction project is between $25,000,000 and $50,000,000.

12. Request for Information (RFIs) must be submitted no later than May 18, 2018, 2:00 PM Hawaii Standard Time. The Government Points of Contact for RFIs are as follows:

Mr. Colin Waki Telephone Number: (808) 835-4393 E-mail Address: colin.k.waki@usace.army.mil

Mr. Kent A. Tamai Telephone Number: (808) 835-4377 E-mail Address: kent.a.tamai@usace.army.mil

13. SITE VISIT INFORMATION: Cameras, including cell phones, will not be allowed during the site visit.

FY16 MCAF RNMD043004, F-22 Fighter Alert Facility Joint Base Pearl Harbor Hickam (JBPHH), Oahu, Hawaii

RFI # References Question Issued Response 77 00 10 00 Notes to Bid

Schedule, Note 6 If the DDESP approval extends beyond the first 90 calendar days intended for non-construction activities, will relief be provided to the 560 calendar days period of performance to complete the entire work?

Please see Am-0003. DDESB Approval has been received.

78 NEOGARD (a part of Hempel USA) is a manufacturer of architectural coatings to include resinous flooring systems. I am inquiring on NEOGARD becoming a “Pre-Approved” Manufacturer for Section 096723.15 – Fuel Resistive Flooring and also for future projects with the Army Corp of Engineers.

Neogard meets the criteria and product performance of other listed manufacturer’s and their systems within section 096723.15.

The U.S. Army Corps of Engineers, Honolulu District does not pre-approve any manufacturers/products regarding the Unified Facilities Guide Specifications (UFGS). A request may be submitted through the Tri-Service Building Technology Vendor Portal/WBDG Whole Building Design Guide via the following website: https://www.wbdg.org/ffc/dod/tri-service-technology-vendor-portal

79 NEOGARD (a part of Hempel USA) is a manufacturer of architectural coatings. I am inquiring on NEOGARD becoming a “Pre-Approved” Manufacturer for Section 096723.15 – Fuel Resistive Flooring and also for future projects with the Army Corp of Engineers.

The U.S. Army Corps of Engineers, Honolulu District does not pre-approve any manufacturers/products regarding the Unified Facilities Guide Specifications (UFGS). A request may be submitted through the Tri-Service Building Technology Vendor Portal/WBDG Whole Building Design Guide via the following website: https://www.wbdg.org/ffc/dod/tri-service-technology-vendor-portal

Section 00 60 00, Appendix A

FY16 MCAF RNMD043004, F‐22 Fighter Alert Facility

80 The U.S. Army Corps of Engineers, Honolulu District does not pre-approve any manufacturers/products regarding the Unified Facilities Guide Specifications (UFGS). A request may be submitted through the Tri-Service Building Technology Vendor Portal/WBDG Whole Building Design Guide via the following website: https://www.wbdg.org/ffc/dod/tri-service-technology-vendor-portal

We are requesting the addition of “PDQ Manufacturing” as an approved alternate manufacturer to that listed in the door schedule, and under section 08 71 00 of the specification for the following products when applicable to your project; 1) Mortise Locks, 2) Cylindrical Locks, 3) Door Closers, 4) Panic Devices with Trim.

Per FAR 36 2.02 Specifications, 11.103 Market acceptance paragraphs (a), (1), (i), (ii), (iii), (5) and 11.104 Use of brand name or equal purchase descriptions. We offer the following justification for review; test data, the material used, and certifications for the addition of PDQ Manufacturing. PDQ Manufacturing has also met all product testing, materials used, and certifications required by the UFGS and the FAR.

11.103 (a), (1), (i) - Achieved commercial acceptance

PDQ Manufacturing is a member of BHMA, the governing body for commercial contract hardware products standards and specifications. PDQ has an onsite BHMA/InterTech® certified testing laboratory to meet the requirement of recertification of all products every three years. PDQ is an architecturally specified manufacturer for many commercial projects each year.

(a), (1), (ii) - Been satisfactorily supplied to an agency under current or recent contracts

PDQ Manufacturing has supplied many projects which used products of similar form, fit, and function as the specifications on this project.

(a), (2) - Otherwise meet the item description, specifications, or other criteria prescribed in the public notice and solicitation.

PDQ Manufacturing meets all salient physical, functional, and performance characteristics of the brand listed, and as required by the Unified Facility Guide specifications, BHMA standards, ANSI and UL testing.

(Am‐0006)

FY16 MCAF RNMD043004, F‐22 Fighter Alert Facility

81 Will DFARS 7012 and/or NIST 800-171 compliance be considered when evaluating the strength of bids submitted?

No. This solicitation is issued as an Invitation for Bid (IFB) and it will be evaluated in accordance with FAR Part 14 - Sealed Bidding.

82 Specification 21 13

13.00 10

Can the Fire Protection Specialist referenced in 21 13 13.00 10 Paragraph 1.4.1 be within the same firm as long as they are not the engineer of record for the for the Fire Supression System?

The Designer of Record (the Prime Contractor and its Sub- Contractor(s) who were involved in the Fire Suppression System design) cannot participate in Fire Protection related portions of this construction contract.

(Am‐0006)