Attachment_0024_-_DD_254_RCIS_Type_I_W56HZV-15-R-0156.pdf

1. CLEARANCE AND SAFEGUARDING

DEPARTMENT OF DEFENSE a. FACILITY CLEARANCE REQUIRED

CONTRACT SECURITY CLASSIFICATION SPECI FICATION SEcR1’r (The requirements ofthe DoD Industrial Security Manual apply

b. LEVEL OF SAFEGUARDING REQUIRED to all secunty aspects of this effort.)

SFCRET

2. THIS SPECIFICATION IS FOR: (X and complete as applicable) 3. THIS SPECIFICATION IS: (Xand complete as applicable)

a. PRIME CONTRACT NUMBER DATE (YYYYMMDD) )< a. ORIGINAL (Complete date in all cases)

20151001

b. SUBCONTRACT NUMBER b. REVISED REVISION NO. DATE (YYYYMMDD)

(Supersedes all previous_specs)

c. SOLICITATION OR OTHER NUMBER I DUE DATE (YYYYMMDD) DATE (YYYYMMDD)

W56HZV- I 5-R-0 156 c. FINAL (Complete Item 5 in all cases)

41S THIS A FOLLOW-ON CONTRACT? L_i YES

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release Drect Through (Specify)

PM FP Security Manager, ATTN: Security Manager, 6501 E. II Mile Road, AMSTA-CSS I MS 105. Warren, MI 48397-5000, 586-282-5862. who will obtain public release approval through thc prescribed channels. During the performance of work on this contract and for any period of time after contract performance, the contractor shall provide protection as required by the DD 254.

to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs)* for review.

*ln the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classification guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended, (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

See follow on attachments and information regarding proper procedures for handling and protecting classified information in accordance with DoD 5220.22M, National Industrial Security Program Operating Manual (NISPOM) and the applicable Security

Classification Guides.

The undersigned has reviewed this Security Specification, understands the provisions and vill ensure that it is complied with within the limits of his/her responsibility, and that any violations are brought to the attention of the KO and supporting Security Manager.

Coneurrence:_/s/Jay Richards O8OCT 2015

Signature Date

Jay Richards, Procurement Analyst, PdM ALUGS

Concurrence: _/s/ Joe Mastrogiacomo 08 OCT 2015

Signature Date

Joseph Mastrogiacomo, Product Integrator, PdM ALUGS

Concurrence: _/s/ Keith W Ahlstrom 09 OCT 2015

Signature Date

Keith W Ahlstrom, Contracting Officer, Army Contracting Command — Warren

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to SM requirements, are established for this contract. [J Yes [_] No (If Yes, identify the pertinent contractual clauses in the contract document itsel( or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

See Continuation Sheets

15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office. [__J Yes [J No (If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

a. TYPED NAME OF CERTIFYING OFFICIAL b. TITLE c. TELEPHONE (Include Area Code)

Matthew Curis Program Security Manager 586-282-5862

d. ADDRESS (Include Zip Code) 17. REQUIRED DISTRIBUTION Al’IN: AMSTA-CSS ((32 ‘lACOM) a. CONTRACTOR

6501 E. 11 Mile Road b. SUBCONTRACTOR

Warren, Ml 48397-5000 c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

e. SIGNATURE d. U.S ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

C U R.1 S N1A..TTI-1 F \V G EO Iig,Ii5,odN, CI.TRIS uATIlu.v (tORuS 13”914 ISO —

. TIN o’IlS ,1IS (,ovo,Orn.,flt rn-PD oo-PKI, ,rn’I’S.O, X e ADMINISTRATIVE CONTRACTING OFFICER on—CURlS MAITCISW GEORCIS I355’11415’, R GE. 13999141 39 - ISNo 201551507245.0007 f. OTHERS AS NECESSARY

DD FORM 254 (BACK), DEC 1999

UNCLASSIFIED

DD 254, Item 13 Continuation Sheet W56HZV-15-R-0l56

CONTINUATION OF BLOCK 13

Item iO.a - COMMUNICATIONS SECURITY (COMSEC): Classified COMSEC material is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. COMSEC information/material will be accessed and/or processed JAW DoD 5220.22-M, NSA/CS S Policy Manual 3-16, AR 380-40 (Policy for Safeguarding and Controlling Communications Security), and additional security Guidelines for COMSEC (Attachment B). When access is required at Government facilities, contractor personnel shall adhere to COMSEC rules and regulations as mandated by Command policy and procedures. Contractor personnel requiring COMSEC access must be U.S. Citizens and possess a final clearance at the appropriate level. All contractors shall be briefed before access to COMSEC is granted.

The contractor may be subject to the Department of Army Cryptographic Access Program (DACAP) if contractor employees handle unencrypted S ECRET crypto or TOP SECRET crypto keying material. Subcontracts requiring classified COMSEC information shall be awarded only upon the written approval of the Government Contracting Officer.

The contractor shall comply with all of the security requirements in DOD 5220.22-M, National Jndustrial Security Program Operating Manual (NISPOM), if applicable.

Item lO.j — FOR OFFICIAL USE ONLY (FOUO): FOUO Information generated and/or provided under this contract shall be safeguarded and marked as specified in additional Guidelines for Controlled Unclassified information (CUI). FOUO is not a classification marking. It identifies unclassified DoD information that is exempt from public disclosure. FOUO is a category of Controlled Unclassified Information (CUI).

(Attachment A).

Item 1O.k (2) - SECURITY CLASSIFICATION GUIDANCE: PEO CS&CSS Armoring Systems SCG, dated 31 August 2012 and PEO GCS Unmanned Ground Vehicle Systems SCG, 12 September 2011.

Item l1.c-RECEIVE AND GENERATE CLASSIFIED INFORMATION: The contractor requires access to classified source data up to and including Secret in support of the work effort. Any extracts or use of such data requires the contractor to apply derivative classifications and markings consistent with the source documents. Use of “Multiple Sources” on the “Derived From” line necessitates compliance with the NISPOM, paragraph 4-208a, and the use of a bibliography.

a. Employees of the contractor may not act as couriers for classified material. All classified material will be transmitted lAW the NISPOM (Registered US Mail, cleared commercial carrier (Monday thru Thursday), Same Day Delivery, SIPRNET, or secure fax. This applies only to and from TACOM LCMC and the contractor’s office.

b. All classified material (CONFIDENTIAL and SECRET) supplied to the

UNCLAS SIFTED

contractor during the course of this contract will be turned into PM Force Projection for destruction not later than one year after receipt. Contractors willing to maintain the material for a longer period must receive permission from the PM Force Projection.

c. Contractors are required to establish means to control classified information. This will include maintaining receipts (DA 3964) of all classified material shipped or received that is associated with this contract number.

d. GSA approved security containers are required to store classified material.

Contractors will ensure all personnel who perform maintenance on any security container storing classified information are cleared to the SECRET level.

e. Any contractor who wishes to hold meetings in which classified information will be discussed are required to do so either on federal installations or a cleared facility.

They should contact TACOM G2 for approval of meeting locations.

f. In the event of a possible compromise of classified information under the control of the vendor, the vendor will immediately notify DSS; and TACOM G2 LCMC (586-282-5862, MAIL: TACOM G2, ATTN: AMSTA-CSS, 6501 East 11 Mile Road, Warren, MI 48397).

g. The contractor will establish a Restricted Area in accordance with the NIPSOM to be utilized for classified COMSEC. COMSEC may be stored in a NSA approved storage facility when not being used in support of the integration effort. An NSA COMSEC account will be required. Contractor will apply to the National Security Agency for a traditional COMSEC account. Contractor is responsible for obtaining equipment necessary for secure voice communications.

h. All classified material received will be handled and stored JAW with NISPOM. Any computer used by the contractor to process classified information must have written accreditation. The contractor shall obtain accreditation from the Cognizant Security Office (DSS). The contractor must provide a copy of their accreditation certificate from DSS to the G2 TACOM prior to processing any classified information.

All computers will be marked with the appropriate visual markings showing what level of classified information may be processed on the computer (e.g. Unclassified, Confidential, and Secret). All storage media will be marked to reflect the highest classification level of the system accreditation irrespective of what is saved on the storage device.

i. When processing classified information on a computer, the contractor will ensure he/she does so in a secure environment. Continuous supervision will be required to ensure inadvertent access to classified does not occur. All personnel with access to the computer must have a SECRET clearance and a need to know.

j. Cell phones, Palm Pilots, pagers, etc., will not be operated in areas approved for classi fled computer processing.

Item 11.d - FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE:

Contractor must provide adequate storage at their facility for collateral classified hardware to the level of SECRET.

Item l1.h — REQUIRE A COMSEC ACCOUNT: Contractor is authorized the use of secure telephones with fax, encryption equipment and keying material for classified program requirements.

Item 11.j - OPERATIONS SECURITY (OPSEC) REQUIREMENTS: The contractor shall develop an OPSEC program, in accordance with DoDM 5205 .02-M and AR 530-1, with specific features based on command or unit approved OPSEC requirements. All U.S. contractors shall provide annual program specific OPSEC training for all program personnel. New program personnel shall receive OPSEC training within 30 days of program assignment. Annually, contractors shall complete OPSEC training and submit a report, validating 100% completion to the Government Security Office by 30 September. These requirements, OPSEC Plan and training, shall be flowed down to all approved U.S. subcontractors with access to CUI and/or classified material.

Item 11.1- PROGRAM PROTECTION PLAN (PPP): The government Program Protection Plan (PPP) is effective immediately and is mandatory for use by all program participants and field activities at all program locations.

Item 13 — SECURITY GUIDANCE: Collateral classified information generated in support of this contract shall be classified in accordance with the source material used or the governing Security Classification Guides (SCG). The applicable SCGs are the PEO CS&CSS Armoring Systems, dated 31 August 2012 and the PEO GCS Unmanned Ground Vehicle (UGV) Systems SCG, dated 12 September 2011. In addition to the SCGs, classified information will also be protected in accordance with DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM) and the DD Form

254. Unclassified information will be protected in accordance with the PEO CS&CSS Armoring Systems SCG, the PM Force Projection Unmanned Ground Vehicle (UGV) Systems SCG, the OPSEC Plan, and Attachment A - ADDITIONAL GUIDELNES FOR

CONTROLLED UISICLAS SIFIED INFORMATION.

a. All classified material shall be transmitted in accordance with the DoD 5220.22-M, NISPOM (Registered US Mail, cleared commercial carrier (Monday thru Thursday), Same Day Delivery, or secure fax). Access to technical data by foreign interests is prohibited unless authorized by a valid export authorization. The following is made part of this DD Form 254:

1. Attachment A — Additional Security Guidelines for Controlled Unclassified Information (CUT) (Reference Continuation of Block 13 — Item 10(j) and Item 10(k).

2. Attachment B — Additional Security Guidelines for Communications Security (Reference Continuation of Block 13 — Item 10(a) and Item 11(h).

3. Attachment C — Additional Security Guidelines for Operations Security (OPSEC) (Reference Continuation of Block 13 — Item 11(j).

b. Classified Information requirements, CUI, and OPSEC requirements will flow down to all approved U.S. Subcontractors (including Unclassified U.S. Subcontractors) as an integral part of their respective contracts.

c. UPON COMPLETION OF CONTRACT OR AT GOVERNMENT DIRECTION: All classified (CONFIDENTIAL and SECRET), or CUT material (documents, media, hardware, software, vehicles, etc.) supplied to the contractor, or generated or derived from the CUT material supplied to the contractor, during the course of this contract will be destroyed in accordance with DoD 5220.22-M, NISPOM, or the contractor shall return these items to PM Force Projection for destruction no later than one year after completion of contract, or at an earlier date if directed by the Government.

Contractors wishing to maintain the material for a longer period must receive permission from the Contracting Officer.

d. Threat Awareness and Reporting Requirements: ICW NISPOM 1-30 1, the contractor shall report threat-related incidents, behavioral indicators, and other matters of counterintelligence (CI) interest specified in AR 381-12, Chapter 3, through the facility security officer to the government security officer, the nearest military CI office, the Federal Bureau of Investigation, and the Defense Security Service. The contractor shall annually train personnel who handle classified information JAW AR 38 1-12, Chapter 2.

e. Foreign Disclosure:

1. In no instance will DA Classified Military Information (CMI) be disclosed to transmit to other than authorized representatives of the foreign government or international organizations for which disclosure has been approved.

2. Disclosure of CMI is determined by DA officials designated as disclosure authorities. CMI disclosures must be limited to that information authorized to be disclosed to accomplish the purpose of the visit.

3. Foreign Disclosure Office for G2, TACOM LCMC is Dave Hazelip at 6501 II. 11 Mile Rd, Warren MI 48397, (586) 282-6262.

LTNCLAS SIFIED

ATTACHMENT A

ADDITIONAL GUIDELINES FOR CONTROLLED UNCLASSIFIED

INFORMATION (CUI)

1. Controlled Unclassified Information (CUI): On November 4, 2010, the President signed Executive Order 13556 “Controlled Unclassified Information”, which established a program for managing CUT.

a. CUT is unclassified information that meets the standards for safeguarding and dissemination controls pursuant to statute, and government-wide policies under EO 13556. Previously, similar information was referred to as Sensitive But Unclassified (“SBU”) throughout the executive branch and some of this information may meet the requirements to become CUT. Controlled unclassified information (CUT) includes, but is not limited to, “For Official Use Only (U//FOUO)” information; “Sensitive But Unclassified” (formerly “Limited Official Use”) information; “DEA Sensitive Information”; DoD Unclassified Controlled Nuclear Information”; “Sensitive Information”, as defined in the Computer Security Act of 1987; and information contained in technical documents.

2. Definition of U//FOUO Information: Information that has not been given a security classification pursuant to the criteria of an Executive Order, but which may be withheld from the public for one or more of the reasons cited in FOIA exemptions 2 through 9, shall be considered as being “For Official Use Only.”

3. Identification of Markings: The “Unclassified//For Official Use Only” (U//FOUO) marking is assigned to information at the time of its creation in a DoD User Agency. It is not authorized as a substitute for a security classification marking but is used on official government information that may be withheld from the public under exemptions 2 through 9 of the Freedom of Information Act (FOTA). The marking of records at the time of their creation provides notice of U//FOUO content. An unclassified document containing U//FOUO information shall be marked “UNCLASSIFIED//FOR OFFICIAL USE ONLY” in bold letters at the bottom on the outside of the front cover (if any), on each page containing U//FOUO information, and on the outside of the back cover (if any).

4. Dissemination and Transmission of U//FOUO Information: No person may have access to information designated as U//FOUO unless that person has been determined to have a valid need for such access in connection with the accomplishment of a lawful and authorized Government purpose. Until U//FOUO status is terminated, the U//FOUO information may be disseminated within DoD Components and between officials of DoD Components and DoD contractors to conduct official business for the Department of Defense, provided that dissemination is consistent with any further controls imposed by a distribution statement. Recipients shall be made aware of the status of such information, and transmission shall be by means that preclude unauthorized public disclosure.

Transmittal documents shall call attention to the presence of U//FOUO attachments.

Removal of the “U//FOUO” marking can only be accomplished by the originator or other competent authority.

5. Transporting U//FOUO Information: Records containing U//FOUO information shall be transported in a manner that precludes disclosure of the contents. When not commingled with classified information, U//FOUO information may be sent via first-class mail or parcel post. Bulky shipments, such as distributions of U//FOUO Directives or testing materials, that otherwise qualify under postal regulations may be sent by fourth-class mail. When material marked U//FOUO is removed from storage, attach DA Label 87 (For Official Use Only Cover Sheet).

6. Electronically Transmitted Messages: The contractor shall not transmit any FOUO information electronically over the Internet unless it is encrypted by FIPS 140-2 standard.

Alternative dissemination methods include: secure fax; US mail; and hand carrying FOUO material. FOUO information maybe disseminated by vendor’s internal computer network if its protected with a firewall and individual access is controlled by using IDs and passwords. Electronically transmitted messages containing U//FOUO information shall be marked appropriately. Unclassified messages containing U//FOUO information shall contain the abbreviation “U//FOUO” before the beginning of the text. Such messages shall be transmitted in accordance with communications security procedures in ACP-l21 (United States Supplement 1) for U//FOUO information. Army follows the procedures in AR 25-11. U//FOUO information should be sent encrypted and not sent via public internet mail providers. Documents containing U//FOUO shall not be posted on websites available to the public.

7. Telephone Usage: U//FOUO information may be discussed over the telephone lines with DoD Components and between officials of DoD Components and DoD contractors to conduct official business for the Department of Defense. Facsimile communications of U//FOUO information may be transmitted by nonsecure terminals, with the U//FOUO marking intact, between DoD Components and between officials of DoD Components and DoD contractors to conduct official business for the Department of Defense. Use of wireless telephones should be avoided when other options are available.

8. Storage of U//FOUO Information During Duty Hours: Records/data determined to be U//FOUO shall be placed in an out-of-sight location if the work area is accessible to persons who do not have a need for access to this information. During working hours, U//FOUO information shall he placed in an out-of-sight location if the work area is accessible to persons who do not have a need for the information.

9. Storage of U//FOUO Information During Nonduty Hours: At the close of business, U//FOUO records shall be stored so as to preclude unauthorized access. Filing such material with other unclassified records in unlocked files or desks, etc., is adequate when normal U.S. Government or government-contractor internal building security is provided during non-duty hours. When such internal security control is not exercised, locked buildings or rooms normally provide adequate after-hours protection. If such protection is not considered adequate, U//FOUO material shall be stored in locked receptacles such as file cabinets, desks, or bookcases.

10. Termination: The originator or other competent authority, e.g., initial denial and appellate authorities, shall terminate U//FOUO markings or status when circumstances indicate that the information no longer requires protection from public disclosure.

11. Disposal: Documents containing U//FOUO shall be destroyed by shredding. When a mechanical automatic shredder is not available, non-record copies of U//FOUO materials may be destroyed by tearing each copy into pieces to preclude reconstructing, and placing them in regular trash containers. CD-ROMJDVD copies of U//FOUO documents will be destroyed by breaking the CD media into pieces or placing into a mechanical shredder that can accommodate destruction of CDs.

12. Unauthorized Disclosure: The unauthorized disclosure of U//FOUO records does not constitute an unauthorized disclosure of DoD information classified for security purposes. Appropriate administrative action shall be taken, however, to fix responsibility for unauthorized disclosure whenever feasible, and appropriate disciplinary action shall be taken against those responsible. The DoD Component that originated the U//FOUO information shall be informed of its unauthorized disclosure. The unauthorized disclosure of U//FOUO information protected by the Privacy Act may result in criminal sanctions. Further information regarding FOUO handling, transporting, and destruction is available in the following documents:

a. DoDM 5200.0 l-V4, February 24, 2012, DoD Information Security Program:

Controlled Unclassified Information:

http://www.dtic.mil/whs/directives/corres/pdf/52OOO1_vo14.pdf

b. Army Regulation AR 25-55: http://www.apd.army.mil/pdffi1es/r25_55.pdf

c. Army Regulation AR 25-2: http://www.apd.army.miLfpdffiles/r25_2.pdf

13. Distribution Statements: Marking of Technical Data will include the statement provided in the Security Classification Guide. If the contents of the technical document require more than one Distribution Statement, apply the most restrictive statement. This does not preclude additional mandated markings as may be required by the contract.

Other request for this document shall be referred to AMSTA-CSS, 6501 E. 11 Mile Road, MS 105, Warren, MI 48397-5000, COM (586) 282-5862.

UNCLASSIFTED

ATTACHMENT B

COMMUNICATIONS SECURITY (COMSEC)

1. Contractor Generated Communications Security (COMSEC) Material: Any material generated by the contractor (including, but not limited to: correspondence, drawings, models, mockups, photographs, schematics, status programs and special inspection reports, engineering notes, computations and training aids) shall be marked, handled, and safeguarded appropriately in accordance with AR 3 80-5, AR 3 80-40, DoD 5220.22-M, DoDM 5200.01, and the NSA/CSS Policy Manual 3-16.

2. Contractor employees or cleared commercial carriers shall not carry classified COMSEC material on commercial passenger aircraft anywhere in the world without the approval of the procuring contracting officer.

3. No contractor generated COMSEC or government furnished material may be provided to the Defense Technical Information Center (DTIC). Contractor generated technical reports will bear the statement “Not Releasable to the Defense Technical Information Center per DoD Directive 5100-38.”

4. Unclassified COMSEC information released or generated under this contract shall be restricted in its dissemination to personnel involved in the contract. Release in open literature or exhibition of such information without the express written permission of the Director, NSA, is strictly prohibited.

5. Recipients of COMSEC information under this contract may not release information to subcontractors without permission of the government security manager.

6. Additional notices to be affixed to the cover and title or first page of contractor generated COMSEC documents:

a. “COMSEC MATERIAL - ACCESS BY CONTRACTOR PERSONNEL

RESTRICTED TO U.S. CITIZENS HOLDING FINAL GOVERNMENT

CLEARANCE.”

b. “THIS PUBLICATION OR INFORMATION IT CONTAINS MAY NOT BE

RELEASED TO FOREIGN NATIONALS WITHOUT PRIOR SPECIFIC APPROVAL

FROM THE DIRECTOR, NSA. ALL APPROVALS WILL IDENTIFY THE SPECIFIC

INFORMATION AND COPIES OF THIS PUBLICATION AUTHORIZED FOR

RELEASE TO SPECIFIC FOREIGN HOLDERS. ALL REQUESTS FOR

ADDITIONAL ISSUANCES MUST RECEIVE PRIOR SPECIFIC APPROVAL FROM

THE DIRECTOR, NSA.”

ATTACHMENT C

OPERATIONS SECURITY (OPSEC)

1. If the contractor generates unclassified OPSEC sensitive information, this information will be protected at the same level as FOUO information. The contractor will not transmit any OPSEC sensitive information electronically over the Internet unless it is encrypted JAW FIPS 140-2 standard. Alternative dissemination methods include secure fax, US mail, and hand carrying OPSEC sensitive material. OPSEC sensitive information maybe disseminated within the contractor’s internal computer network if it is protected with a firewall and individual access is controlled by using IDs and passwords.

(Under no circumstances can classified information be transmitted over an unclassified network.)

2. The contactor may disseminate “FOR OFFICIAL USE ONLY” (FOUO) information to their employees who have a need to know for the information in connection with the purchase order.

3. All FOUO material will be destroyed by tearing or shredding to make unreadable.

Electronic media will be purged with approved software or destroyed through a physical process.

4. Because of antiterrorism/force protection, operations security, and counterintelligence concerns the contractor will not release any diagrams, maps, floor plans, schematics, or digital pictures of the installation to outside organizations or companies without the approval of the COR and G2, TACOM. All information proposed for public release in any form (video, pictures, article, brochure, web site, etc.) will undergo a PEO CS&CSS OPSEC Review using the most current and approved PEO CS&CSS STA Form 71 14.

5. Examples of information that would be considered OPSEC sensitive:

- Equipment capabilities, limitations, and vulnerabilities.

- Detailed mission statements.

- Operation schedules.

- Readiness and vulnerability assessments.

- Test locations and dates.

- Inventory charts and reports.

- Detailed budget data.

- Photographs of components.

- Detailed organizational charts (with phones and e-mail listings).

- Technical and scientific data.

- Unclassified technical data with military applications.

- Critical maintenance information.

- Information extracted from a DOD Intranet web site.

- Lessons learned that could reveal sensitive military operations, exercises, or vulnerabilities.

- Logistics support (munitions, weapons, movement).

- Specific real time support to current or on-going military operations.

- Delivery schedules

- Manufacturing methods.

6. All information pertaining to this contract which is being considered for public release will undergo an OPSEC review using the most current and approved PEO CS&CSS STA Form (STA Form 7114, copy attached) prior to release.

7. OPSEC review requests should be sent to:

a. Program Security Manager, PM Force Projection 6501 E. 11 Mile Rd Warren, MI 48397 D/P 586-282-5862