Attachment_0012_-_MIL_Grade_Connector_Waiver_Form.xlsx

Cover

UNCLASSIFIED

1 October 2014

Instructions

UNCLASSIFIED

Connector List

UNCLASSIFIED

Microsoft_Word_Document1.docx Instructions for completing the MIL Grade Connector Waiver Form

The contractor populates the form (Connector List Tab) with the information requested. One row is to be completed for each connector requiring a waiver for use in lieu of MIL-GRADE designation. Complete the list as follows:

· # of Connectors per Vehicle – identify the quantity of this connector used on a single vehicle

· Manufacturer – List the manufacturer of the connector

· Model Number – List the Manufacturer’s part number

· Commercial Standard – List any commercial standards the connector has been tested to, also list any commercial certifications the connector has qualified for.

· Materials used – List the type of material for the identified parts, if the pins are plated - state this, if no seal is present in the connector state ‘N/A.’

· # of pins – List the total number of pins contained in the connector, if not all pins are active, include the number of pins that are active.

· Specifications – List the temperature rating, the type of features used for locking and keying and the rated number of insertions for the connector.

· Environmental Qualifications Testing – List the test reference used to validate the part for its intended use.

· Connector application – identify the connector(s) physical location in vehicle and to the fording lines, expected exposure to environment

· Circuit type – identify the connector(s) types of circuits in the connector (AC, DC, ground/return, RF, signal, hazardous voltage) image1.emf