A004_DID_ContractorCMP.pdf
PDF 121 KB Posted
- Attached to
- F-16 Brake Control System Redesign (BCSR) Federal contract opportunity
- Solicitation number
- SPRHA1-21-R-7000
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains a Data Item Description and details of a related federal contract opportunity. The Data Item Description provides the format and required content for a Supplier's Configuration Management Plan, including processes and procedures for configuration management and planning, identification, change management, status accounting, and verification over the lifecycle of a product.
The related federal contract opportunity is a solicitation from the Defense Logistics Agency Aviation to redesign the Brake Control System for the F-16 fighter aircraft. The solicitation seeks to address continued operations of the aircraft throughout its remaining service life. Additional details on pre-solicitation and the full solicitation can be found at the listed websites. The contracting office is located in Hill Air Force Base, Utah and the agency is the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
Show all 50
F-16 Brake Control System Redesign (BCSR) has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: SUPPLIER’S CONFIGURATION MANAGEMENT PLAN
Number: DI-SESS-80858D Approval Date: 20200211
AMSC Number: N10144 Limitation: N/A
DTIC Applicable: No GIDEP Applicable: No
Preparing Activity: NM Project Number: SESS-2020-007
Applicable Forms: N/A
Use/relationship: The Supplier’s Configuration Management (CM) Plan describes the organization, procedures, and controls of the Supplier’s CM program. The principle use is to provide the
Government a basis for review, evaluation, and monitoring of the CM program and associated proposed components.
a. This DID contains the format, content, and intended use information for the data deliverable resulting from the work task described in EIA-649-1 and the principles of EIA-649 (Copies of these standards are available online at www.sae.org or from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel 877-606-7323 [inside USA and Canada] or 724-776-4970 [outside
USA]).
b. This DID supersedes DI-SESS-80858C.
Requirements:
1. Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.
2. Format. The Supplier’s CM plan shall be prepared in Supplier format.
3. Content. The Supplier’s CM plan shall identify the Supplier’s processes and procedures for:
a. Configuration management and planning over the lifecycle of a product.
b. Configuration identification throughout the product lifecycle.
c. Configuration change management involves controlling and documenting the product and its product configuration information to the product’s end of life.
d. Configuration status accounting involves recording and reporting of information needed to trace and manage configuration of a product.
e. Verification and audits to ensure consistency of product information are established and maintained in the execution of the total configuration, including hardware, software, and firmware.
End of DI-SESS-80858D
DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.
Source: http://assist.dla.mil -- Downloaded: 2020-07-15T18:59Z
Check the source to verify that this is the current version before use.
http://www.sae.org/
File details come from the government source that posted it. Updated .