4_-_Amend_2_Attachment_2_FOVA_174962.pdf

Amendment 002 Attachment No. 2

P15PS00118 FOVA 174962

FOVA 174962

Specification Section 013216, 1.3, B. add the following to the end of the existing paragraph:

The government must track construction costs for Building 987 by Shell, Tenant Improvement and Custom Tenant Improvement categorizations. The schedule of value shall be provided in Uniformat II breakout to facilitate this categorization. The contractor shall work with the government on the base schedule of value and all subsequent contract cost modifications to determine the correct cost allocation.

The building construction cost for Building 987 will be divided into the following cost categories in accordance with established commercial real estate practice, General Services Administration guidelines, and the standards of the Building Owners and Managers Association International (BOMA), with general guidelines as follows:

1) Shell: The building shell includes the base building and tenant areas. The base building is the complete enveloping structure, the base building utilities systems, the utilities chases, restrooms, and the elevator and fire egress stairwells as required for code compliant. Tenant areas will have broom-clean concrete floor slabs or wood sub-floors, gypsum wallboard spackled and primed on exterior perimeter walls and interior core walls. Tenant areas ceiling considered part of the shell will be metal panels, gypsum wall board, or suspended acoustical tile ceilings with parabolic fluorescent lighting. In general, utilities will have been brought to tenant demised area but not run through them.

2) Tenant Improvements: Interior framing and finishes and fixtures, including utilities, fire alarms, fire, suppression systems, that typically take space from the shell condition (such as building envelop, utilities chases, and the elevator and fire egress stairwells) to a finished usable condition.

3) Custom Tenant Improvements: Customization includes security enhancements, lighting beyond shell provisions, server room temperature controls, communications and A/V connections or equipment, etc.

The government will provide additional definition to the successful bidder and will assist in the development of the schedule of values. This requirement is not intended to add administrative costs or burden to the project.

FOVA 174966

1. Specification Section 014000 – 1.4, H. Add the following to the end of the paragraph:

“The contractor shall pay for all permits, inspections, fees and any other costs associated with the requirements of this section.”

P15PS00118 FOVA 174962

2. Specification Section 017340 - 3.2, B. Delete and replace with:

B. Permits, inspections and fees: Portions of the Project are located on City or State owned roads that may require permits. In addition to encroachment permits and/or right-of-way permits, there may be grading permit requirements and others not identified here. There may also be tap fees for connecting to utilities not owned by the Federal Government as well as meter installation fees. In addition, inspections by local jurisdictions are required and any fees shall be paid for by the contractor. The contractor shall be responsible for obtaining and payment for all permits, inspections, and fees associated with installation of utilities for this project.

Commissioning specification Specification Section 019114 - 3.9 Deferred Testing - delete this section in its entirety.

Specification Section 019114 - 3.10 Equipment & System Schedule - change to Specification Section 019114 - 3.9 Equipment & System Schedule