60040520.pdf
PDF 547 KB Posted
- Attached to
- Bldg. AS518 Paint Booth Repairs
- Solicitation number
- N4008524R2728
About this file
This document appears to be an Addendum to a Construction Drawing for a project to repair the paint booth at Building AS518 at Camp Lejeune. The key details are:
The Addendum includes two additional sheets with construction notes and a revised electrical plan. The work includes providing control cabling between a new exhaust fan VFD and the existing paint booth control panel, and providing power wiring from a panelboard to a disconnect switch and manufacturer-provided VFD. The contractor is responsible for providing a complete and operational system, including maintaining UL certification of modified equipment. All existing receptacles behind the paint booth will remain.
The related federal contract opportunity is Solicitation Number N4008524R2728 for the Bldg. AS518 Paint Booth Repairs project. This is a MACC contractor-only requirement for the Naval Facilities Engineering Command (NAVFAC) Camp Lejeune area of responsibility.
View the file
Other files
Show all 25
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
(X) GUH5-1
(X)MAU1
BE1-20
(X)EXHAUST
FAN
3#6 & 1#10 GND -
1" CND
FED FROM MAU1
(X)PAINT BOOTH
CONTROL PANEL
(X)PB01
60A/3P/1
W/60AF
POWER DISTRIBUTION
BUS APPROXIMATELY
LOCATED HERE
P2B-1
4#3 & 1#8 GND -
1-1/4" CND
100A/3P/4X
W/100AF
tt(X) tt(X) tt(X) tt(X) tt(X) t (X t
(X t (X t
(X t (X t
(X t (X t
(X t (X t
(X t (X t
(X t(X) t(X) t(X) t(X)
(X) PANEL BE1
(X) PANEL
P2B
(X) ELECTRICAL
EQUIPMENT
(X) PANEL
(X) SWITCHGEAR
(X) ELECTRICAL
EQUIPMENT
(X) ELECTRICAL
EQUIPMENT
(X) TRANSFORMER
(X) TRANSFORMER(S)
STACKED
(X) TRANSFORMER
(X) PANEL
(X) PANEL
(X) PANEL
tt(X) tt(X) tt(X) tt(X) tt(X)
2246 Yaupon Drive Wilmington, NC 28401
Phone: 910.791.4000 Fax: 910.791.5266 www.cbhfengineers.com NC# P-0506c Copyright 2024CBHF Engineers, PLLC
Engineers, PLLC 35230
SEAL
R
EENI GN
P R
OF E S S I ON
A
E
L
NO
RT H CAROL I NA
JA
S
O N
P . FAM I GL
I E T
T I
ADDENDUM: ADDED TWO SHEETS 06/19/24
CONSTRUCTION KEYED NOTES:
1 PROVIDE CONTROL CABLING PER MANUFACTURER'S RECOMMENDATION BETWEEN THE
NEW EXHAUST FAN VFD AND EXISTING PAINT BOOTH CONTROL PANEL.
ELECTRICAL EQUIPMENT MOUNTED ON THE OUTSIDE OF THE PAINT BOOTH. PROVIDE
GALVANIZED STEEL SLOTTED STANDARD STRUT FOR SUPPORTING EQUIPMENT.
COORDINATE APPROVED MOUNTING METHODS WITH VENDOR OF PURCHASED PAINT
BOOTH. PROVIDE POWER WIRING AS INDICATED FROM PANELBOARD TO DISCONNECT
SWITCH TO MANUFACTURER PROVIDED VFD.
1/4" = 1'-0" 0 4' 8'2'
1. CONTRACTOR IS RESPONSIBLE FOR PROVIDING A COMPLETE AND OPERATIONAL SYSTEM
FOR ALL BUILDING SYSTEMS INCLUDING, BUT NOT LIMITED TO MAINTAINING UL
CERTIFICATION OF EXISTING MODIFIED EQUIPMENT.
2. ALL EXISTING RECEPTACLES RECESSED IN BLOCK WALLS BEHIND PAINT BOOTH WILL
REMAIN.
1/4" = 1'-0" 0 4' 8'2'2 ENLARGED PAINT BOOTH POWER PLAN1 ENLARGED ELECTRICAL ROOM POWER PLAN
GENERAL NOTES:
NOT TO SCALE0 KEY PLAN
WORK THIS AREA
PLAN 2/E401
WORK THIS AREA
PLAN 1/E401
JFamiglietti Date 06/19/2024
| 2024-06-19T09:55:39-0400 | |
| Jason P Famiglietti | |
| I am the author of this document. |
File details come from the government source that posted it. Updated .