FFE FINAL - Building A.pdf

WORK ORDER NO. 1624797

FINAL DESIGN SUBMISSION

FF&E PACKAGE

April 05, 2021

P303 Marine Corps Reserve Center (Building A) Camp Fretterd – Reisterstown, Maryland

PREPARED BY:

NAVFAC Washington, Design and Construction 1314 Harwood St. SE Bldg.212

Washington Navy Yard, DC 20374

FOR OFFICIAL USE ONLY (U/FOUO)

Marine Corps Reserve Center, Reisterstown, MD (Building A) Final FF&E Package

Table of Contents

1. BVA Cover Letter

2. FF&E Cost Summary Sheet

3. Technical Specification (BVD RFQ Spreadsheet)

4. Performance Criteria

a. Systems Furniture

b. Casegoods

c. Ergonomic Seating

d. Multipurpose Chair

e. Table

f. Storage and Workbench

g. Appliance and Miscellaneous

5. Questionnaires

6. Furniture Plans

1: BVD Cover Letter

Marine Corps Reserve Center, Reisterstown, MD (Building A) Final FF&E Packages

BVD Cover Letter Contractor’s Interior Designer Letterhead and contact information

BVD ANALYSIS COVER LETTER DATE

1624797 P-303 Marine Corps Reserve Center (Building A) Reisterstown, MD 21117

To Whom It May Concern:

Please provide a proposal from your firm utilizing your NAVSUP BPA OFFICE FURNITURE and PACKAGED FURNITURE contract pricing to provide furniture for this project. This building is tentatively scheduled for completion on [ date ]. We are asking BPA contract holders to provide pricing on all furniture items listed, so that we can provide a Best Value Determination for the project. Include your BPA contract name and number.

We will include the drawings in CAD format for your use after Best Value process is completed.

Quantities listed are based on the preliminary design and are provided as a courtesy to aid in assessing the project for discount structure.

Please provide your NAVSUP BPA pricing proposal by [ date ]. If you have any questions, please email both contacts below:

[ Name ] [ Title ] [ Phone No. ] [ E-mail ]

Proposal Requirements:

Please provide the following information in your proposal:

1. Offer should include items on the NAVSUP BPA OFFICE FURNITURE and PACKAGED FURNITURE. Answer the questions and provide pricing in the format provided. Specifications and typicals are listed as part of enclosure (1). Provide your pricing and answers as part of the Pricing and Questionnaire spreadsheet, enclosure (2).

2. Literature describing items proposed in your offer (finishes samples not required at this time).

3. Please submit an electronic copy to [ Name ] by this deadline and mail a hard copy, postmarked by the due date, to [ Address ]. Include a cover letter signed by the representative managing the account, plus your company’s terms & conditions.

4. Solicitation or inquires to end users or base personnel regarding this project and RFQ are not permitted. Direct any inquiries regarding this project to [ Name ].

5. The furniture specifications written for this proposal have been based on Information gathered from the Users and project requirements. Compatible systems manufacturers will be acceptable if substitution meets the specification listed in the FF&E package.

Evaluation factors:

Aesthetics and perceived appropriateness of offered product compared to RFQ requirements

Product performance and construction: Probable life of the item offered as compared with that of a comparable item; Perceived product durability and quality

Comfort/suitability of the system and/or component Warranty considerations

Environmental and energy efficiency considerations (sustainability) Price Maintenance availability; Dealer/manufacturer proximity for support Past performance Delivery terms

Scope of Work:

For your consideration in preparing pricing for the project, the selected Dealer’s Responsibilities/ Scope of Work will include the following:

1. Produce complete furniture specifications and pricing based on space plan in enclosure (1) provided by NAVFAC INTERIOR DESIGNERS. All specifications are to be coordinated with NAVFAC INTERIOR DESIGNERS for design intent, but quantities will be the responsibility of the Dealer.

2. CONTRACTOR’S INTERIOR DESIGNER will coordinate all furniture finish selections with building finishes; provide samples from which we may select.

3. Coordinate order entry, production schedule and shipping with Manufacturer.

4. Conduct site visit(s) to become familiar with site and to check for potential installation problems. CONTRACTOR’S INTERIOR DESIGNER MUST IDENTIFY KNOWN JOBSITE

CONDITIONS SUCH AS # OF FLOORS, STAIRS, ELEVATOR SIZE AND AVAILIBILITY,

AND TYPICAL HOURS OF JOBSITE ACCESS, ETC.

5. Coordinate installation dates and logistics with General Contractor and NAVFAC

WASHINGTON

6. CONTRACTOR’S INTERIOR DESIGNER MUST IDENTIFY APPROXIMATE # OF DAYS

CONTRACTOR HAS IN CONSTRUCTION SCHEDULE FOR FF&E INSTALLATION.

7. Sign off on the condition of the space at the start of the installation and be responsible for any damages incurred during installation. Provide proper protection for the building during installation.

8. Provide all labor, materials and equipment needed to receive, unload, stage and install furniture in accordance with approved plan.

9. Remove debris and packing materials from the site.

10. Coordinate connection of electrical system with General Contractor.

11. Coordinate with IT personnel for running of data cabling by others.

12. At completion of installation, inspect all product for proper operation/ defects and perform a final cleaning.

13. Conduct walk-thru with CONTRACTOR’S INTERIOR DESIGNER, NAVFAC

WASHINGTON, and End User to address any discrepancies or damages. Have any replacements parts ready to be ordered with lead-time report within 5 days of walk through completion.

14. After occupancy, instruct End User’s staff in proper use and adjustment of product, correct deficiencies in installation and coordinate replacement of defective product with Manufacturer.

15. Installation will occur on a U. S. military installation. Vendor representatives and installers must comply with Base and General Contractor security, safety, and health requirements while on Base and jobsite.

16. CONTRACTOR’S INTERIOR DESIGNER must solicit from UNICOR and other mandatory Government sources per FAR 8.002 in additions to the BPA vendors.

Enclosure: FF&E Cost Summary Sheet Enclosure: Technical Specification (BVD RFQ Spreadsheet) Enclosure: Questionnaires Enclosure: Performance Criteria Enclosure: Furniture Plans

Sincerely, CONTRACTOR’S INTERIOR DESIGNER’S NAME

CONTACT INFORMATION

Copy to: NAVFAC WASHINGTON

2: FF&E Cost Summary Sheet

CODE QTY ITEM DESCRIPTION MANUFACTURER UNIT COST TOTAL

A-1 82 Small Trashcan

A-2 82 Small Recycle Bin

A-3 4 Medium Trashcan

A-4 3 Medium Recycle Bin

A-5 4 Large Trashcan

A-6 3 Large Recycle Bin

A-7 1 Magazine Rack

A-8 2 Anti-fatigue Mat

A-9 1 Wall Shelf

A-10 NOT USED

A-11 1 Brochure Rack

A-12 2 Chart Holder

A-13 2 Step on Trashcan

A-14 1 Janitor Cart

A-15 NOT USED

A-16 Large Trashcan (Building B)

CH-1 81 Nesting Chair

CH-2 9 High Task Chair

CH-3 69 Task Chair

CH-4 41 Guest Chair

CH-5 13 Conference Chair

CH-6 1 Mobile Stool, Medical

CH-7 1 Recliner, Lactation

CH-8 Tablet Arm Chair (Building B)

CH-9 2 Loveseat Sofa

CH-10 250 Stacking Chair

CH-11 1 Task Chair

CH-12 2 Side Chair

CH-13 1 Blood Drawing Chair

CH-14 1 Task Chair

CH-15 6 Side Chair

CP-1 10 Printer Station

D-1 2 Mobile Laptop Workstation

D-2 1 Single Desk

D-3 1 Single Desk

EQ-1 1 Refrigerator

EQ-2 2 Refrigerator, Commercial

EQ-3 Projector (Part of AV)

EQ-4 1 Refrigerator, Undercounter

EQ-5 2 Microwave

EQ-6 TV & Bracket (Part of AV)

VENDOR: TBD

BPA/GSA CONTRACT #

SIN & CATEGORY NAME: SIN 71 1 Packaged Office

DATE:

NAVAL FACILITIES ENGINEERING COMMAND

FURNITURE, FIXTURES & EQUIPMENT (FF&E) PRELIMINARY COST SUMMARY

LOCATION: Reisterstown, MD

PROJECT: Marine Corps Reserve Center, Building A

EQ-7 1 Coffee Pot

EQ-8 1 Refrigerator, Medical

EQ-9 47 Wall Clock

EQ-10 Copier (GFGI)

EQ-11 Fax (GFGI)

EQ-12 Printer (GFGI)

EQ-13 Shredder (GFGI)

EQ-14 Projector Screen (Part of AV)

EQ-15 1 Exam Bed

EQ-16 2 Medical Cart

EQ-17 2 Mobile Medical Workstation

EQ-18 Flat Monitor Computer (GFGI)

EQ-19 1 Centrifuge

EQ-20 1 Tube Shaker

EQ-21 1 Label Printer, Pharmacy

EQ-22 1 Integrated Diagnostic System

EQ-23 NOT USED

EQ-24 2 Sharp Cabinet W/ Glove Disp

EQ-25 2 Portable Eye Wash Station

EQ-26 6 Clearing Barrel, Portable

EQ-27 4 Clearing Barrel, Wall Mount

F-1 11 Lateral File, 5H

F-2 Classified V Safe (GFGI)

F-3 1 Lateral File, 2H

FE-1 19 Fire Extinguisher, Portable

L-1 Lectern (Part of AV)

S-1 31 Metal Shelving, 5H

S-2 Weapons Rack (GFGI)

S-3 7 Flammable Liquid Storage

S-4 26 Storage Cabinet

S-5 1 Display Case

S-6 4 Medical Shelving

S-7 12 Stacking Chair Dolly

S-8 9 Pallet Container Rack, 96" W

S-9 60 Pallet Container

S-10 2 Pallet Container Rack, 48" W

T-1 16 Training Table

T-2 1 Worktable, Medical

T-3 13 Table

T-4 1 Conference Table

T-5 AV Credenza (Part of AV)

T-6 3 Drafting Table

T-7 1 Side Table

T-8 4 ESD Workbench

T-9 3 Dining Table

T-10 2 Workbench

T-11 Instructor Desk (Building B)

T-12 1 Coffee Table

T-13 2 Worktable, Kitchen

T-14 1 Corner Worktable, Kitchen

T-15 Nesting Table (Building B)

T-16 9 Worktable

W-1 34 Wardrobe

WS-1 45 Workstation

WS-2 20 Private Office Desk

WS-3 2 Executive Office Desk

WS-4 1 Workstation

0.06

0.057

TOTAL with SIOH/Project Oversight if applicable

NOTE: Adjust all formulas to reflect vendor/project Fees, State Sales Tax, HAR, and SIOH/Project Oversight Rates.

TOTAL FF&E + HAR

Handling and Adminstrative Rate (HAR) (NTE 5%)

FF&E Total

SIOH/Project Oversight ROUNDED UP TO NEAREST $

FF&E Product Total

Project Contingency

State Sales Tax (If Applicable)

Shipping/Freight

Project Mgmt

Design Mgmt

Installation

3: Technical Specification (BVD RFQ Spreadsheet)

PROJECT NUMBER, NAME, LOCATION: 1624797, Marine Corps Reserve Center, Reisterstown, MD (Building A)

BPA CONTRACT NAME AND NUMBER:

DEALER NAME:

REQUEST FOR PRICING

PART 1: Vendor Pricing PLEASE NOTE: Technical Performance Criteria takes precedence over the basis of design examples provided on this spreadsheet.

A-1 SMALL TRASHCAN

28 quarts (7 gallons) to fit under standard-height desk. Material to be resin. Rolled rims add strength, 10 1/2" W x 14 1/2" L x 15" H

Basis of Design:

Rubbermaid, Wastebasket 28 qt

A-2 SMALL RECYCLE BIN

28 quarts (7 gallons) to fit under standard-height desk, Material to be resin, Rolled rims add strength, 10 1/2" W x 14 1/2" L x 15" H

Basis of Design:

Rubbermaid, Wastebasker Recycling 28 qt

A-3 MEDIUM TRASHCAN

Venting channel for easy liner removal, handles, resin body material, no cap, 23 Gal Capacity, 22"x11"x30"

Basis of Design:

Rubbermaid, Vented Slim Jim

A-4 MEDIUM RECYCLE BIN

Venting channel for easy liner removal, handles, resin body material, no cap, 23 Gal Capacity, 22"x11"x30"

Basis of Design:

Rubbermaid, Vented Slim Jim

EXT. NET PRICE

BASIS OF DESIGN PROPOSED ITEMS

ITEM DESCRIPTION PHOTO or DWG QTY MFR/SERIES NAME or MODEL # &

FEATURES PHOTO or DWG QTY NET PRICE

Technical Specification (BVD RFQ Spreadsheet)

A-5 LARGE TRASHCAN

Venting channel for easy liner removal, handles, resin body material, no cap, 32 Gal Capacity, 25D"x30"H

Basis of Design:

Rubbermaid, Vented Brute

A-6 LARGE RECYCLE BIN

Venting channel for easy liner removal, handles, resin body material, no cap, 32 Gal Capacity, 25D"x30"H

Basis of Design:

Rubbermaid, Vented Brute

A-7 MAGAZINE RACK

Wall mounted or free standing Magazine Rack

Basis of Design:

Global Industrial, 11 Pocket Literature Rack

A-8 ANTI-FATIGUE MAT

24"X36"

Basis of Design:

Global Industrial

A-9 WALL SHELF

4"X36" Metal wall shelf w/ ledge *Must be black finish

Basis of Design:

Crate and Barrel, Davis 36" Zinc Wall Shelf

A-10 NOT USED

A-11 BROCHURE RACK

36"H Wall mounted brochure rack *Must be black finish

Basis of Design:

Display2go, 3-Tiered Acrylic Literature Wall Rack

A-12 CHART HOLDER

Wall mounted medical chart holder

Basis of Design:

Global Industrial, Steel wall File Pockets Letter Size

A-13 STEP ON TRASH CAN

3.5 gal, Step on trash can

Basis of Design:

Global Industrial, 3.5 gal Step on Trash can

A-14 JANITOR CART

46"X22", 25 gal trash bag, 4" swivel casters and 8" real wheels, extended bottom shelf

Basis of Design:

Rubbermaid, Janitor Cart Black 6173-88

A-15 NOT USED

A-16 LARGE TRASHCAN BUILDING B

CH-1 NESTING CHAIR, CASTERS

Chair shall have a low square mesh back. Back shall contain nylon supports as required. A 1.04” thick upholstered foam seat shall be provided. A 4-leg steel frame with casters is required.

Chair shall nest or stack in sections of 8 chairs per bunch, 22” D x 28” W x 35 ½” H Shell Back: Mesh Seat Fabric: Upholstery, Grade 4, 100,000 DR

Frame Finish: Metal

Basis of Design:

KI, Torsion Air

CH-2 HIGH TASK CHAIR

Height adjustable, mid-back task stool, no arms, flex back, 5-star swivel base with soft casters, foot rest Back: Mesh Seat: Upholstery, Grade 4, min

100,000 DR

Basis of Design:

Knoll, Multigeneration High Task

CH-3 TASK CHAIR

Fully adjustable seat, back and arms, seat height adjustment to be minimum 15”, seat depth adjustment to be minimum 3”. dual-wheeled nylon caster for carpet.

Back: high-performance elastomer and perforated mesh Seat: high-resiliency molded urethane foam with textile cover, Grade 4, 100,000 DR Base Finish: Metal

Basis of Design:

Knoll, Generation

CH-4 GUEST CHAIR

Open arms, low & square polypropylene back with steel structural supports, lumbar adjustment of minimum 8.25”, steel 4-leg frame , stack 4 on the floor, 25"W x 19"H x 16"H Back & Seat: Upholstery, Grade 4, 100,000 DR

Frame Finish: Metal

Basis of Design:

Sit on it seating, Achieve

CH-5 CONFERENCE CHAIR

Height adjustable, mid-back arm chair, 5-star swivel base with hard casters, parellel upholstery stitching, tilting mechanism, Back: Upholstery, Grade 4, min.

100,000 DR

Seat: Upholstery, Grade 4, min

100,000 DR

Frame: Polished metal

Basis of Design:

Andreu World, Flex Executive

CH-6 MOBILE STOOL, MEDICAL

5-leg pneumatic stool, soft casters Seat: Stain- resistant, woven, knit-backed, vinyl upholstery Frame: Satin Aluminum

Basis of Design:

Universal Medical, CL-2155

CH-7 RECLINER, LACTATION ROOM

Locking casters Seat: Stain-resistant, antimicrobial vinyl, min 100,000 DR

Basis of Design:

National Business Furniture, Harmoby Mobile Medical Recliner 25063

CH-8 TABLET ARM CHAIR BUILDING B

CH-9 LOVESEAT SOFA

Upholstered sofa with 4-legged steel legs, max 68"L Seat: Upholstery, Grade 4, min

100,000 DR

Leg: Metal

Basis of Design:

Andreu World, Element

CH-10 STACKING CHAIR

Polypropyene seat & back side chair, stacking, 4 metal legs, 19.25"Wx21.25"D

Basis of Design:

KI, Grazie

CH-11 TASK CHAIR

Pneumatic seat-height adjustment, adjustable back height, swivel 5-star base, hard casters, adjustable T-arms Seat & Back: Upholstery, Must be Red color, min 100,000 DR

Basis of Design:

Knoll, Remix Ergonomic Chair

CH-12 SIDE CHAIR

Four-leg frame, stackable, open arms, metal glides Seat: Upholstery, Grade 4, min

100,000 DR

Back: Polypropylene *Must be all black finish

Basis of Design:

KI, Rapture Stack Chair

CH-13 BLOOD DRAWING CHAIR

Adjustable flip-up armrest, with storage, 300 lb weight capacity Seat & Back: Plastic Frame: Powder coated steel

Basis of Design:

Tigermedical, Blood Drawing Plastic Chair w/ Storage , TM126

CH-14 TASK CHAIR

Fully adjustable seat, back and arms, seat height adjustment to be minimum 15”, seat depth adjustment to be minimum 3”. dual-wheeled nylon caster for carpet.

Back: high-performance elastomer and perforated mesh Seat: high-resiliency molded urethane foam with textile cover, Grade 4, 100,000 DR Base Finish: Metal *All finish to be black

Basis of Design:

Knoll, Generation

CH-15 NESTING CHAIR, CASTERS

Chair shall have a low square mesh back. Back shall contain nylon supports as required. A 1.04” thick upholstered foam seat shall be provided. A 4-leg steel frame with casters is required.

Chair shall nest or stack in sections of 8 chairs per bunch, 22” D x 28” W x 35 ½” H Shell Back: Mesh Seat Fabric: Upholstery, Grade 4, 100,000 DR

Frame Finish: Metal *All finish to be black

Basis of Design:

KI, Torsion Air

CP-1 PRINTER STATION

48"X24" standard height credenza, 2 doors, HPL laminate tops, painted steel chassis & storage, non-handed components, all storages lockable keyed alike

Basis of Design:

Haworth, X-Series

D-1 MOBILE LAPTOP

WORKSTATION

Sit to stand adjustment with gas cylinder pole, High impact ABS plastic top with pinter shelf, 16"Wx10.5"D, retractable mouse pad, poly base w/ 3 locking casters

Basis of Design:

Global Industrial, Aidata Sit/Stand Mobile Laptop workstation w/ printer shelf, WR3B2057878

D-2 SINGLE DESK

Rectangular worksurface (30"Dx60"W) w/ center grommet;

End unit support; Floorstanding Pedestal, steel front, BBF, 29.24"Dx 16"W, Lock, Pull Case: Laminate Worksurface: Laminate

Basis of design:

Knoll, Dividends Horizon

D-3 SINGLE DESK

Rectangular worksurface (30"Dx60"W) w/ center grommet;

End unit support; Floorstanding Pedestal, steel front, BBF, 29.24"Dx 16"W, Lock, Pull Case: Laminate Worksurface: laminate *Finish must be black

Basis of design:

Knoll, Dividends Horizon

EQ-1 REFRIGERATOR

Side by Side Refrigerator, minimum 25.6 Cu.Ft.; Adjustable Interior Storage, Smudge-Proof Stainless Steel, Sliding Spill-Safe Glass Shelves, Crisper Drawers, Quick Freeze, Humidity Controlled, Energy Saver Plus Technology;

Energy Star Certified, 33.37"D x 36"W

Basis of Design:

Frigidaire, FGHS2631PF

EQ-2 COMMERCIAL REFRIGERATOR

Side by side door refrigeration, Max. 54" W, Stainless Steel Finish, LED Interior lighting

Basis of Design:

True, T-Series T-49-HC

EQ-3 PROJECTOR Part of AV package

EQ-4 UNDERCOUNTER

REFRIGERATOR (ADA)

32"H x 24"W max. to fit under ADA counter, Stainless Steel, LED interior lighting *coordinate door swing

Basis of Design:

Summit, AL54CSSHV

EQ-5 MICROWAVE

Minimum 1.2 Cu. Ft., 1800 watts, medium volume, program 100 menus, 5 power levels, 4- cooking stages, 60 minute max cooking time, ADA compliant, hinged door with tempered glass, stainless steel exterior and interior, 5'-0" cord, 14"W x 22"D x 14-3/4"H

Basis of Design:

Amana

EQ-6 DISPLAY MONITOR & BRACKET Part of AV package

EQ-7 COFFEE POT

Medium volume brewing; Includes Splash Guard; Large 200oz. Tank provides back to back brewing;

Automatic warmer shut-off;

Includes hot water faucet; Energy-saver mode

Basis of Design:

Bunn Commercial, CWT15

EQ-8 MEDICAL REFRIGERATOR

24"W all refrigerator/all freezer combination, remote alarm contacts w/ Sensaphone 400 & 800 Series, temperature alarm, audible power failure alarm, sensor failure alarm 9.4 Cu. Ft.

(refrigerator 8 cu. ft / freezer 1.4

cu. ft) *coordinate door swing

Basis of Design:

Accucold, ARS8PV-

FS24LSTACKMED2

EQ-9 WALL CLOCK

Minimum of 14" Dia, clear acrylic face cover, using a quartz battery with a second hand or equal, 14” Diameter x 2”D Finish: Chrome

Basis of Design:

Peter Pepper Products

EQ-10 COPIER GFGI

EQ-11 FAX GFGI

EQ-12 PRINTER GFGI

EQ-13 SHREDDER GFGI

EQ-14 PROJECTOR SCREEN Part of AV package

EQ-15 EXAM BED

Slip resistant retractable step, extendable & adjustable stirrups, leg extension, pneumatic back positioning Seat: Seamless, medical stain resistant, bolstered support standard manufacturer's upholstery

Basis of Design:

Brewer Company, Basic Exam Table 4000

EQ-16 MEDICAL CART, BASIC

Basic medical supply cart w/ storages and accessory rail, 28"Wx22"Dx36"H

Basis of Design:

Herman Miller, 36" H Procedure cart for Basic Supply Storage

CTC.336

EQ-17 MOBILE MEDICAL

WORKSTATION

Pneumatic height adjustment, monitor mount w/ swivel and tilt adjustment, retractable keyboard tray, CPU holder, Mouse storage, heavy duty locking casters, 20.5"Wx24.5"D Construction: metal frame w/ polycarbonate writing surface

Basis of Design:

Global Industrial, Mobile Standing Point of care Medical Workstastion / Computer PC Cart, WG695436A

EQ-18 FLAT MONITOR COMPUTER GFGI

EQ-19 CENTRIFUGE

6 tubes to spin 8-15 ml tubes, variable spee 300-4000 RMP, 6 placed fixed angle rotor, 30 min mechanical timer, 11"x12"x8"

Basis of design:

Unico, PowerSpin LX Centrifuge, C856

EQ-20 TUBE SHAKER

3D orbital wave motion, timer w/ auto shut-off, 5 - 120 RPM variable speed, adjustable tilt angel, 20lb heavy duty load capacity

Basis of design:

Roekel, Orbitron V Shaker w/ adjustable angle, 281111

EQ-21 PHARMACY LABEL PRINTER

Compatible with PC or Mac;

Provide free software; Thermal printing techonology, Sleep mode capability, 7.5"Dx5.25"Hx5"W

Basis of design:

DIMO, LabelWrite 450 Label Printer

EQ-22 INTEGRATED WALL

DIAGNOSTIC SYSTEM

System to include Coaxial Ophthalmoscope, MacroView Otoscope and Wall Aneroid with Durable one-piece adult cuff

Basis of design:

Welch Allyn, Green Series 77792

EQ-23 NOT USED

EQ-24 SHARPS CABINETS W/ GLOVE

DISPENSER

5 Quartz sharps container with counterbalance lid & glove dispenser, wall mounted, to meet OSHA bloodborne pathogens standard

Basis of design:

Global Industirial, WGB2219121

EQ-25 PORTABLE EYE WASH STATION

Gravity operated eyewash, FDA approved high-density green polyethylene 16 gal tak, ABS plastic eyewash heads w/ 0.4 gpm flow rate over 15 min, yello pull-down activation arm, integral handles on top and sides, wide-fill threaded cap, label-mounted operation and maintenant instructions, and a stainless steel wall bracket

Basis of Design:

Haws, Portable Gravity Fed Eyewash 7500

EQ-26 CLEARING BARREL -

PORTABLE

For calibers up to and including

0.50 BMG, filled with high qulity

granulated rubber

Basis of design:

Mike Gibson Manufacturing, Inc., CTRIFLE

EQ-27 CLEARING BARREL - WALL

MOUNTED

For calibers up to caliber armor piercing rounds

Basis of design:

Pelican Sales, SCT-50CAL

F-1 LATERAL FILE (5 HIGH)

5H combination unit (4 solid front file drawers; 1 spring assisted retractable file drawer), steel ball bearing suspension on all drawers, one label holder per drawer, duaL-point gang lock with safety interlock system, anti-tip protection system (counterweight), drawer fronts are reinforced for added rigidity, closed base provides extra support and prevents dust from working its way into the cabinet, includes hanging rods allowing for letter or legal filing, four adjustable steel leveling glides, master keys, metal construction, 18" x 36"

Basis of design:

Steelcase, Universal System

F-2 CLASSIFIED V SAFE GFGI

F-3 LATERAL FILE (2 HIGH)

Steel ball bearing suspension on all drawers, one label holder per drawer, drawer fronts are reinforced for added rigidity, closed base provides extra support and prevents dust from working its way into the cabinet, includes hanging rods allowing for letter or legal filing, four adjustable steel leveling glides, master keys, HPL laminate top, metal construction, 18" x 36" *Must be black finish

Basis of design:

Steelcase, Universal System

FE-1 FIRE EXTINGUISHER -

PORTABLE

5.21"D x 18.75"H extinguisher with a powder coated steel cylinder and aluminum valve/lever. A discharge range of 20-25 feet - Must be a 4A:60B:C device

Basis of Design:

Kidde

19 MCRC

L-1 LECTERN Part of AV package

S-1 5H METAL SHELVING

Boltless assembly. Shelves snap into place and adjust at 1 1/2" increments, Four-way access for easy loading and unloading, 14-gauge steel posts; 16-gauge steel shelves, powder-coat finish.

18"x48", Add extra shelves to maximize storage space

Basis of Design:

Uline

S-2 WEAPONS RACK GFGI

S-3 FLAMMABLE LIQUID STORAGE

CABINET

(2) doors, 45 gal. capacity, (2) adj.

shelves, 18 gauge steel, 3-point locker, ventilation, grounding attachment, sloped shelves safely directs spills away from containers, meets NFPA 30 & OSHA requirements, master key, 18"x43"x65"

Basis of design:

Pelican Sales, 7125-01-044-2590

S-4 STORAGE CABINET

All-welded heavy duty steel construction, channel door with full length piano higes, (4) adjustable shelves, adjustable leving glides, double door handles, raised base, security lock, master key, 18"x36"x72"

Basis of design:

Global Industrial, T9F500417

S-5 DISPLAY CABINET

Satin aluminum frame, tempered glass sliding doors w/ lock, adjustable half-width shlves, glass back, built-in lighting, 72"Wx16"Dx72"H

Basis of design:

National Business Furniture, 72" W Spirit Display Case W/ Mirror Back 36288

S-6 MEDICAL SHELVING

20 gauge steel construction w/ break-resistant polypropylene nestable plastic shelf bins and anti-sway bracing, 750 lbs shelves capaciy, combination of 4"W bins & 8"W bins, 36"x18"x72"

Basis of design:

Global Industiral, Steel Shelving 13 shelves T9A603447YL

S-7 STACKING CHAIR DOLLY

Dolly to coordinate with CH-10, steel frame, caster

Basis of design:

KI, Transport Dolly, GCD.BL

S-8 PALLET CONTAINER RACK

Stackable (3 high, 15'), to have stops at the rear to prevent wall damage, designed to carry heavy pallet loads, shall be deep enough for pallets accessible for forklifts, 48"Dx96"W, 15'H

Basis of design:

Interlake Mecalux, Mecalux uprights, footplates, load beam,pallet stops & seismic anchors, with standard finish

(72 LF)

S-9 PALLET CONTAINER

Lockable, weatherproof, fiberglass cnotiner, double door on 40" side, built in handles, contains integral fitting, pallet base w/ four-way tineways, six inserts guided and supported by pallet container rack, stackable to 3 high at max, max.

weight load of 1200 lbs, 50 cubic feet, 48"Lx40"Wx41"H

Basis of design:

Plastics Research Corp, 102440

S-10 PALLET CONTAINER RACK

Stackable (3 high, 15'), to have stops at the rear to prevent wall damage, designed to carry heavy pallet loads, shall be deep enough for pallets accessible for forklifts, 48"Dx48"W, 15'H

Basis of design:

Interlake Mecalux, Mecalux uprights, footplates, load beam,pallet stops & seismic anchors, with standard finish

(8 LF)

T-1 TRAINING TABLE

Flip & nesting capability; Standard modesty panel; Ganing capability;

Metalic tabletop power grommet on each side & center of the desk (power & data); Undertable wiremanagement; Daily Link & single circuit power cord; Grommet for rubber floor; Softened PVC edge; T-leg base with glide, 24"x72" Worksurface: Laminate Frame / leg: Metalic

Basis of design:

National Office Furniture, WaveWorks Table

T-2 WORKTABLE, MEDICAL

Fully welded 18 gauge stainless steel table, weight capacity of 300 lbs medical equipment, lower shelf, rubber swivel locking wheels

Basis of design:

AERO Manufacturing, CS-2436

T-3 TABLE

Metalic tabletop power grommet on each side of the desk (power & data); Undertable wiremanagement; single circuit power cord; Solid plastic laminate table top; Softened PVC edge;

Metalic frame / leg finish; T-leg base with glide, 24"x60"

Basis of design:

National Office Furniture, WaveWorks Table

T-4 CONFERENCE TABLE

Rectangle table, Wood laminate table top & metal legs, (3) Table top power/data boxes to house (2) power, (2) USB & (1) HDMI per box w/ flip top in anodized metal, Panel bases w/ multiple direct plu-in cable mangement, 48"x180"

Basis of design:

Nucraft, Flow Conferent Table

T-5 AV CREDENZA Part of AV package

T-6 DRAFTING TABLE

1" laminate top and a heavy-gauge steel four post base construction, 50 degree tilt angle, steel end cleats, paper apron, Greenguard certified, 48"Wx38"Dx37"H

Basis of design:

National Business Furniture, 48"x38" Drafting Table, 70143

T-7 SIDE TABLE

18"D x 19"H wood construction side table

Basis of design:

Herman Miller, Bella Side Table

T-8 ESD WORKBENCH

Hardwood table top, 5ft bench w/ overhead light, lower shelf, (1) lower cabinet, (1) overhead cabinet, (1) lower pegboard back,

(1) upper solid back (2) 6-outlet electrical rails, Steel construction, provide ESD worktop mat, 30"x60"83"

Basis of design:

Equipto, preconfigured Omni Verse Workcenter, OV5-CLD-003

T-9 DINING TABLE

Laminate top with metal base, top is connected to the base via mounting plate, solid steel base plate construction, Greenguard Indoor Air-quality Certified, 30"Dx28.25"H

Basis of design:

Teknion, Audience

T-10 WORKBENCH

Butcherblock table top, (1) 5 drawer cabinet, (1) steel leg, Steel construction, Standard finish, 1500 KG load capacity, key lock, 30"Dx60"Wx35"H

Basis of design:

Lista, Workbench

T-11 INSTRUCTOR DESK BUILDING B

T-12 COFFEE TABLE

Wood frame 24"X24" table with glass top for paper inserts under neath *Must be black finish for body and legs

Basis of design:

National Office Furniture, Myriad Box End Table

T-13 WORKTABLE, KITCHEN

16 gauge stainless steel type 430 top, 18 gauge stainless steel shelf, tubular stainless steel legs w/ stainless steel gussets and 1" adjustable bullet feet, 5" back splash, pre-engineered welded construction, 30"Dx72"Wx35.5"H

Basis of design:

Advanced Tabco, Work Tables Super Saver Series 5" backsplash undershelf style

T-14 CORNER WORKTABLE,

KITCHEN

14 gauge stainless steel type 430 top, tubular stainless steel legs w/ stainless steel gussets and 1" adjustable bullet feet, 5" back splash, pre-engineered welded construction, 30"Dx96"/60"Wx35.5"H

Basis of design:

Advanced Tabco, Stainless Steel Korner Tables

T-15 NESTING TABLE BUILDING B

T-16 WORK TABLE

Weight capacity upto 500 lbs, 14" bottom shelf, steel leg construction, 30"Dx60"Wx36"H, Exterior use *Must be Stainless Steel top

Basis of design:

Uline, Industrial packing Tables

W-1 WARDROBE

Cabinet with a left/right hinged door and coat rod; Flush Base;

Cabinet hardware to match adjacent desk, 12"W x 20"D x 72"H Case: Laminate Lock: Keyed Alike

Basis of Design:

Knoll, Reff Profiles

WS-1 WORKSTATION, 72" X 72"

Primary worksurface rectangular - 30"D x 72"W with end support unit, grommets on each end;

Rectangular worksurface return - 42"W x 24"D with center grommet;

floorstanding Box/Box/File pedestal with lock and no back is provided to support the return worksurface; Overdesk cabinet is included - steel front with 2 lock cores; Overdesk cabinet size - 71- 7/8"W x 14-1/8"D x 15"H; Tackable privacy screen is included below the overdesk cabinet; Screen size - 68-3/8"W x 20-5/16"H;

Undercabinet task lighting Case: Laminate Tackboard: Grade 4, 100.000 DR

Basis of Design:

Knoll, Devidends Horizon

WS-2 PRIVATE OFFICE DESK, 72"x72" Primary rectangular worksurface (30"D x 72"W) with end support unit, grommets on each end;

Rectangular worksurface return (42"W x 24"D) with center grommet; floorstanding Box/Box/File pedestal (16"Wx23"Dx28 3/8"H) with back, flush base & lock; Hutch (72"Wx15"Dx20"H) with finished back single high surround (72"Wx15"Dx43"H), hinged door w/ lock, cubby concealed, bar pull;

Tackaboard below hutch (72"Wx43"H); Keyed alike;

Undercabinet task lighting Worksurface & Case: Laminate Tackboard: Grade 4, 100.000 DR

Basis of Design:

Knoll, Reff Profiles

WS-3 EXECUTIVE OFFICE DESK

Primary rectangular worksurface (30"D x 54"W) with open frame legs w/ flush mount attachment plate, sqaure edge; Rectangular worksurface return (96"W x 24"D) with L base & (3) grommets - each sides & center; Rectangulr worksurface credenza (72"Wx24"D); floorstanding Box/Box/File pedestal (16"Wx23"Dx28 3/8"H) with back, flush base & lock; Floorstanding File/File pedestal (30"Wx23"Dx28 3/8"H) with back, flush base & lock; Hutch (96"Wx15"Dx20"H) with finished back single high surround (96"Wx15"Dx43"H), hinged door w/ lock, cubby concealed, bar pull; Tackaboard below hutch (96"Wx43"H); Keyed alike; Undercabinet task lighting Worksurface & Case: Wood Laminate Tackboard: Grade 4, 100.000 DR

Basis of Design:

Knoll, Reff Profiles

WS-4 WORKSTATION

Primary D Shape worksurface (24"D x 48"W) with 4" Dia. support column; Rectangular worksurface return (42"W x 24"D) with (1) grommet on right; Preconfigured panel, monolithic/monolithic, fabric to raceway both sides (42"Hx24"W, 42"Hx36"W, 42"Hx42"W); Floorstanding File/File pedestal (16"Wx23"Dx28 3/8"H) w/ steel front, pull, no lock & no back *Must have metal frame construction with gray powder coat finish, gray laminate work surfaces, gray laminate work surface edges, black drawers and pedestal, brushed silver metal drawer pulls

Basis of Design:

Knoll, Dividends Horizon

Total Product

Freight/Delivery/Handling, if not FOB destination (% of product total)

* ADJUST FORMULAS AS REQUIRED

Storage - price for 30 day increment in case of unforeseen construction delays - See BVD Request for Pricing Cover Letter

Project Mgmt Fee (% of product total)

TOTAL

State Sales Tax, if applicable

Installation (% of product total)

Design Fee (% of product total)

4: Performance Criteria

Performance Criteria

SYSTEMS FURNITURE

General Features:

Manufacturer must have the same desk base/modular product as the panel system, using the same components (storage, worksurfaces) as the panel system. Desk supported and wall mounted overheads must be available as part of manufacturer’s standard offering.

Electrical Incrementation 11”-14” All storage including towers, overheads, and files must be available in steel construction.

Frame and Tile Stackable, Load Bearing Panels Greenguard, SCS, MAS Green, or BIFMA FES certified FSC certified wood available Lifetime warranty with exclusions for worksurfaces, fabric, and electrical components Products primarily available on GSA Schedule and NAVSUP BPA All products must meet the Trade Agreement Act and/or Buy American Act as stated in the GSA schedule.

SYSTEMS FURNITURE TECHNICAL SPECIFICATIONS

This specification establishes the minimum requirements for the acquisition and installation of the complete and usable system of workstations composed of panels, supporting components, electrical hardware, storage wall if required, communication and data cable routing, special electrical features, and accessories.

Workstation requirements and configurations shall be in accordance with the furniture layout and typical workstation types shown in drawings and specified herein. If dimension variations are not mentioned after the called out dimension within this specification, nominal dimensions are acceptable. Components and hardware shall be provided by a single manufacturer and shall be a standard commercial product as shown in the vendor’s current GSA pricelist. Vendor to submit a a product solution using a single manufacturer for the workstations. All products must be branded from the same manufacturer with the exception of the articulation keyboard tray, task lighting, and work tools.

Panels

1. The panel frame shall be a metal.

2. Panel thickness including the fabric outer surface shall be approximately 3”-4” (+/- 1/8”). The panel shall be a moveable monolithic panel. Worksurfaces and other components must be able to attach in 1 - 2 inch increments.

3. Each panel shall have the ability to route utilities within the stack unit.

4. Panel heights shall fall into the following height ranges: 36” to 42 height may be achieved with a base panel and one stack on panel. All panels shall be available in approximate widths of 24, 36, and 42 inch.

5. Base raceways shall be provided with every panel. The base raceway must be 3 3/4” to 6” high. Magnet held base covers will not be accepted. The raceway cover and top caps shall be constructed of painted roll formed metal (see general note).

6. Cables shall be capable of being accessed behind the removable pad/skin covers. The base raceway shall allow lay in cabling and as required, shall include any cable management accessories to do so. Each stack on panel segment shall have the ability to route utilities within the stack unit.

Panel Connectors Panel connectors shall be constructed of steel or aluminum. They shall be available in straight, two-way, three-way, four-way, end-of-run, T-mount, off modular, and wall mount conditions.

Light blocks shall be installed the full length of the connector. The panel connector shall accept adjoining stack on segments without removing the existing connector.

Face Tile

1. All panels, pads and connector cover seams shall be no more than ½ ” thick.

2. Face tile options should include tackable fabric, embossed metal, glass, wood and marker board options. All pads/skins shall have a metal hooks for attachment to panel. Fabric pads shall be bonded to the frame with an adhesive. Paper management pads/skins (slatwall) shall be constructed of extruded aluminum or steel with a powder coat finish (see general note) and allows the mounting of various types of paper and accessory management devices. All pads/skins 48 inches above the floor shall be structurally engineered so that when overhead components are added to the panel the pad/skins are not crushed.

3. The panel’s fabric shall be field replaceable, so that the entire panel doesn’t have to be replaced.

Electrical

1. The systems furniture is pre-wired to a wiring harness and shall meet one of the following configurations:

5-wire harness consisting of 3 circuit conductors, 1 oversized neutral conductor, and 1 equipment grounding conductor.

Serve 5-wire harnesses with 3 separate circuits. Provide oversized neutrals to match the harness configuration and balance loads between circuits and phases. A single circuit must not serve more than 4 cubicles under any circumstances.

2. Manufacturer to provide electrical system with locations as noted on the drawings. Electrical duplex locations are to be available at any height on the panel frame. Electrical entry into the beltline through panel to panel at the same height and through junctions. Freestanding workstations shall have hard-wire capability per each workstation. Workstation shall be able to provide power at or below work surface with ability to connect to adjacent workstations via a panel. Cable management accessories shall be included.

Voice and Data Wiring The wiring requirements for this project may include three wiring categories: non secure.

Specifications require the separation of each category into the workstations wall box or floor box and as the wiring is routed throughout the panels by a minimum of 6”. Each workstation requires 4 non-secure, two secure and two top secret cables.

1. All data entry is to be by wall box or floor box.

2. Cables shall be capable of being accessed behind the removable pad/skin covers. A cable management system shall be available horizontally within the panel cavity every 11”-14” inches to prevent wires/cables from hanging loose inside the panel. The base raceway shall allow lay in cabling. System manufacturer shall include any cable management accessories as required.

3. Lay-in Cable Management: Cables and electrical must be routed from one panel to another by means of a lay-in installation in a continuous and unobstructed clearance.

4. Wire management channels must allow for a minimum 2” bend radius.

Cable Management The manufacturer to provide necessary grommets and cable management required to conceal all data and electrical cords.

Undersurface Storage

1. Pedestal cabinets shall be of a steel construction. Pedestal shall be a fixed full depth pedestal that supports the worksurface.

2. Pedestal cabinets shall be approximately 15” wide and offered in two depths: approximately 23”.

3. Pedestal depth shall match the depth of the worksurface within 1 1/2 inches.

4. All files drawers shall be equipped to handle both letter and legal filing.

5. Box drawers shall have a ¾” suspension with ball bearing slides. Each box drawer shall include a side-to-side divider. At least one box drawer per cabinet must have an accessory tray capable of holding paper clips, rubber bands and such.

6. File drawers shall have full extension steel ball bearing glides. Loads are to be tested to BIFMA Cubic inch x 0.017 lbs.

7. Freestanding pedestals must be equipped with four leveler glides constructed of galvanized steel and allow up to 1” of height adjustment. Levelers shall be accessible from inside the pedestal cabinet. Freestanding pedestals must have the option of a seat cushion and/or castors.

8. Pedestals shall have a finished metal back.

9. Pedestals shall be non-handed.

10. All pedestals must be equipped with locks.

Worksurfaces Worksurfaces shall be available in approximately 24” and 30” depths. Options for straight, bullet, corners with curvilinear fronts, extended corners, p-tops, spanner half-moons, and other shapes shall be available. Worksurfaces shall be able to receive leg kits and be interchangeable from panel mount to freestanding. Leg kit conversion must be within product line. Worksurfaces shall be a minimum of 1” thick and made with a wood composite core. Worksurfaces shall be available in a high-pressure laminate top or wood veneer (no thermofoil). All worksurfaces shall be independently height adjustable in 1” increments with no shared cantilevers. A split-level dual surface and a sit-to-stand height adjustable surface (electrical, pneumatic, or counter balanced) must be part of the product offering.

Overhead Storage Overhead storage units shall include doors (standard or tambour) and options of sliding, flipper, or open shelf, provided in the sizes and configurations shown on the typicals. Overhead storage units shall accommodate task lighting and shall have a minimum 13 inch depth and standard 11.5" high binders must fit clear inside the overhead storage. System must accommodate panel hung off module overhead ability as well as have to ability for upmounted overheads. Cabinet bins must be available for freestanding workstations as well as panel hung workstations and must have the ability to be mounted on the worksurface and/or wall mounted.

Freestanding Wardrobe Storage

Wardrobe units shall be available in single units to provide a mixture of lateral file type storage, pedestal type storage, open and closed binder storage, and wardrobe storage. Wardrobe storage units shall be available in multiple heights and widths.

Benching:

Benching solution must be offered by the same manufacturer. A different product line is acceptable, however, the same warranty and sustainability features are required. The same finish options are required. Work surface must be supported on a beam or spline and able to span a minimum of 8'-0" without the use of supports other than at the ends. Work surfaces must be able to be installed either single sided or double sided. Integrated power is required, to be supplied by a central trough or grommets; undersurface wire management is required.

Universal storage solutions are acceptable. Bench specific storage solutions options are required. Must be able to attach monitor arms, light fixtures and accessories Privacy screens and work space dividers are available as part of the solution.

Ergonomic Tools (manufacturer specifications are for reference only):

1. Monitor Arms:

a. Monitor arm ranging from 8 – 40 lbs, offers min. 11.5” of dynamic height adjustment and up to 21” of depth adjustment.

b. Optional crossbar: Rugged, high-capacity construction that supports two monitors side-by-side and facilitates simultaneous adjustment; easily able to add crossbar to an existing single monitor arm.

c. Integrated cable management.

d. 180 degree stop mechanism.

e. Quick release ball joint facilitates fast and easy monitor installation and removal.

f. Clamp mount; with optional bolt-through, universal slat wall, wall stud mount.

2. CPU Holder:

a. Slides smoothly on nylon glides in 16” track, with friction locks for easy removal.

b. One-touch 360° swivel motion provides effortless access to cables, ports and drives.

c. Adjusts to fit CPUs 3” to 10” wide by 12” to 20” high.

d. Adjustable mounting plate ensures that the CPU will be centered and balanced.

3. Cable Management System:

a. Easy installation with two screws or double-sided tape.

b. Tape can support 8 lbs. of equipment for 10 years or more.

c. Options available large enough to support power strips if required.

4. Key Board Tray:

a. Tilt adjustment range: Zero to -15 degrees negative tilt only. No positive tilt positioning to encourage low-risk typing postures. Negative tilt with positive tilt option is acceptable.

b. Lift and self-lock mechanism, no levers or locks.

c. In/Out Slide, Standard 21.625” Under-desk track must be available.

d. Mouse platform with multiple angle adjustments for right and left hand users.

Task Lighting Fluorescent tasklights shall high efficiency and not be less than 6 inches shorter than the corresponding shelf or overhead on which it is hung . LED tasklights shall be a minimum of 18”.

All tasklight power cords shall be enclosed within a vertical wire cover or clipped between the overhead storage and the worksurface.

Locking All workstation components to be keyed alike.

Sustainability The system shall be Greenguard, SCS or MAS Green certified. Must contain recycled content.

FSC certified wood must be available and used if stated in the typical workstation requirements.

Cradle to Cradle, SMaRT, or BIFMA Level 2 may be required.

General Painted metal surfaces must meet all ANSI/BIFMA performance criteria for scratch resistance and finish durability, and painted metal components must meet ANSI/BIFMA level environmental standard. Dealer must have in-house services including interior design, sales, installation, and warehousing capability. Dealer must use an NCIDQ certified Interior Designer on the project for programming and design development. Dealer/manufacturer must have a showroom within approximately 4 hours of the project site.

CASEGOODS

Casegoods General Features Manufacturer’s lines should offer Contemporary, Transitional or Traditional design element options.

Contractor shall provide casegoods products that meet or exceed the requirements of

ANSI / BIFMA X5.5.

All products must be available on GSA contract.

All products shall carry a minimum 10-year warranty. Limitations or exclusions involving materials and components such as lamps and ballasts, wood veneer, and upholstery fabric are acceptable.

All desks shall be non-handed (modular).

All pieces in suite from one complete line.

Dealer/manufacturer must have a showroom within 4 hours of the project site.

SYSTEMS FURNITURE TECHNICAL SPECIFICATIONS

This specification establishes the minimum requirements for the acquisition and installation of the complete and usable suite of furniture composed of desks.

Requirements and configurations shall be in accordance with the furniture layout and typical types shown in drawings and specified herein. If dimension variations are not mentioned after the called-out dimension within this specification, nominal dimensions are acceptable.

Component and overall sizes noted on the workstations typical will take precedence. Products that are scheduled for discontinuation will not be accepted. Components and hardware shall be provided by a single manufacturer and shall be a standard commercial product as shown in the vendor’s current GSA pricelist. Vendor shall submit a single product solution for the workstation.

All products must be branded from the same manufacturer.

Construction and Materials

1. Minimally acceptable cores shall be composed of lumber core plywood, minimum (3) ply-particleboard or MDF as defined in ANSI A208.1; with a minimum density of 40 lbs./ft3. They shall be of sufficient strength and designed to prevent top from warping while in normal use.

2. For laminate casegoods edge to be matching 3mm edge band at user edge (front) and 1mm matching edge band at sides and back. Edge banding shall match laminate.

3. All exterior laminate surfaces shall be high pressure laminate (HPL) meeting NEMA LD3 specifications and available in wood grain patterns. The laminate shall be of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects. The laminate shall be .050” thick. The surface shall have a non-glare or “matte” finish.

4. Work surfaces shall be a minimum 1 1/8” thick with a minimum of 3-ply balanced construction.

5. All floor casegoods to have adjustable leveling glides with up to 1” adjustability and shall be inserted into solid wood cleats.

Drawers Drawers to include box drawer, files drawer and lateral file drawer shall:

1. Drawer fronts shall be solid wood, MDF, lumber core, or a minimum three (3) ply balanced laminated construction of minimum forty-five pound (45lbs.) density fiber core material with laminate on the exposed side.

2. Drawer fronts shall attach separately to the drawer box.

3. Drawer boxes shall be constructed of solid wood, lumber core, wrapped MDF or particleboard, or metal materials and dovetail joinery.

4. Drawer bottoms shall be reinforced and four corner dovetailed wood drawers shall be provided to withstand heavier than typical loads.

5. File drawers shall utilize a heavy-duty full extension steel ball bearing slide and positive, cushioned in/out stops for smooth operation. Box drawers shall utilize a full extension slide with over-travel.

6. Hanging folder frames or rails shall be capable of front-to-back and side-to-side hanging (letter and legal file sizes).

Finishes – Laminate Casegoods

1. Laminate tops, storage and chassis shall be a standard option Type 107 high pressure standard grade plastic laminate that meet MEMA HGS specifications. The laminate shall be of a uniform quality, free from blisters, wrinkles, cracks, scratches, dent marks, heat marks or other defects. The laminate shall be .048” thick minimum.

The top surface shall have a non-glare or “matte” finish.

2. Laminate finishes for work surfaces shall be offered in finishes to match solid wood and wood veneer components.

3. Laminate wood grains on “U” desk configurations (e.g., desk, bridge, credenza) shall run in the same direction.

4. Tack boards shall be provided in a standard grade fabric, grade 1 or A.

Product Design and Offering

1. Work surfaces shall be available in a variety of sizes and styles. Custom sizes and shapes shall be available per government specification.

2. Manufacturers’ product line must have a minimum of the following pieces; single anddouble pedestals, bullet and bow desk shapes, returns, credenzas, transaction tops, bridges, file cabinets, bookcases, overhead storage, storage cabinets, pedestals, and wardrobes.

3. Locks shall be standard on all desks, credenzas, returns, undersurface pedestals, and certain storage units. Lock cylinders shall be removable if rekeying is necessary.

Key random and key specific options are available.

4. Optional items such as keyboard trays, tack boards, center drawers, and monitor arms products shall be available.

5. Furniture mounted LED task lights shall be standard on upper storage units and shall have a beam spread which provides light on entire work surface below and shall not be less than 6” shorter than the corresponding storage unit from which it is hung. All task light power cords shall be secured either behind the tack board or behind the overhead cabinet with fasteners.

Panel Options

1. Modesty panels to come in full, half, quarter height and no modesty.

2. Modesty panels for modular desks shall be recessed under the desktop.

3. Bridge and credenza modesty panels, if required for structural integrity, shall be quarter height in order to access voice, data and electrical outlets.

4. Back panels can be attached to undersurface pedestals to provide a finished back.

5. Back of pedestal units to be finished

6.