Manadatory Door Hardware.pdf

08 71 00 Door Hardware4th Edition | Federal Security Solutions

APPROVED PRODUCT LIST

MANDATORY SUPPLY FOR DOOR HARDWARE

FAR Part 8, Clause 52.208-9 Contractor Use of Mandatory Sources of Supply requires that the products listed in this catalog, which have been assigned National Stock Numbers (NSNs), and included in the AbilityOne® Procurement List, be specified and procured on all federally funded projects. No substitutions allowed.

MORTISE LOCKS | CYLINDRICAL LOCKS | EXIT DEVICES

DOOR CLOSERS | STAND-ALONE KEYPAD LOCKS

PDQ IS AN AbilityOne®

AUTHORIZED DISTRIBUTOR

CUSTOMER SERVICE

717-656-5301

LANCASTER, PA

TABLE 0F CONTENTS

WHO, WHAT, WHERE, WHEN, WHY AND HOW

PDQ CAPABILITIES STATEMENT .................................................................................................................................. 3-4

PAST PERFORMANCE LOCATIONS

MORTISE LOCKS .................................................................................................................................................... 5-9 CYLINDRICAL LOCKS ............................................................................................................................................. 10-14 EXIT DEVICES ..................................................................................................................................................... 15-20 DOOR CLOSERS .................................................................................................................................................. 21-24 STAND-ALONE ELECTRONIC KEYPAD LOCKS ................................................................................................................ 25-27 THE AbilityOne® PROGRAM

LAWS, REGULATIONS, POLICY

WHO PRODUCES SKILCRAFT® PRODUCTS?

WHAT ARE SKILCRAFT® PRODUCTS?

WHERE ARE SKILCRAFT® PRODUCTS PRODUCED?

WHEN ARE SKILCRAFT® PRODUCTS PROCURED?

WHY ARE SKILCRAFT® PRODUCTS PROCURED?

HOW ARE SKILCRAFT® PRODUCTS PROCURED?

• AbilityOne® products co-branded PDQ® / SKILCRAFT®, are manufactured, assembled or finalized by people who are blind or severely vision impaired.

• All AbilityOne® facilities are located within the United States and its jurisdictions.

• Products that have been presented to the National Industries for the Blind (NIB) to be manufactured, assembled and packaged at an approved not for profit agency for the blind or severely vision impaired.

• These products are reviewed by several agencies of the federal government to insure compliance with Federal guidelines, statutes and regulations.

• Once final approval is granted, each of the approved products are assigned an AbilityOne® Procurement List National Stock Number (NSN).

• Products included in this brochure have been assigned SKILCRAFT® branding, most have also been assigned NSNs. Ref: “Federal Register 2/9/2016 (PL # 20150054).

• Products that have been assigned an AbilityOne® Procurement List NSN or carry the SKILCRAFT® brand can only be produced at an NIB approved not for profit agency for the blind or severely visually impaired.

• Per FAR 52.208-9 “Contractor Use of Mandatory Sources of Supply or Services”, only AbilityOne® Door Hardware products, which carry the PDQ®/SKILCRAFT® co-brand, shall be procured and used for all federally funded architectural projects and MRO requirements.

• These AbilityOne® products have no equal for Federal procurement and no substitutions are allowed per (41 U.S.C. 8504) and the 1984 Competition in Contracting Act.

• Through Federal mandate, AbiltyOne® Products, including Door Hardware, are intended to provide meaningful and fulfilling work for those who are blind or severely vision impaired (41 U.S.C. § 46).

• Through normal Government channels, GSA or any authorized AbiltyOne® distributor.

CAPABILITIES STATEMENT

CORE COMPETENCIES:

• Expert staff of architectural specification writers and consultants.

• Products are certified to ANSI/BHMA Grade 1 testing standards, ideally suited for institutional applications.

• Global market presence.

• Active membership in BHMA.

• Products are UL Listed for Fire and Life Safety.

• On site certified testing laboratory.

• Staff represents over 500 years industry expertise.

• End user and distributor sales force of 50-plus in CONUS.

• Manufacturing facilities located in Lancaster, Pennsylvania.

• Regional distribution centers provide expedited delivery.

• Factory keying and security consulting available through select distribution.

• Production lead time 3 to 5 days.

• All products BAA & TAA compliant.

• Products meet ADA compliance requirements.

PRODUCTS

ANSI/BHMA GRADE 1

CERTIFIED

DIFFERENTIATORS:

• AbilityOne® Program Products are co-branded PDQ® / SKILCRAFT® .

• PDQ has assembled a team of trained experts and specification consultants to assist end users, architects, contracting authorities, and facility managers with compliance with FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services.

• PDQ is an approved AbilityOne® distributor for door hardware products.

• PDQ is dedicated to supporting AbilityOne® BSC (Base Supply Center) locations, facility maintenance contract holders, and FSSI contract holders with supply chain solutions, technical service, and training to ensure comprehensive federal end user support.

• Simplified acquisition and procurement.

• Mortise locks meet Operational and Security Grade 1 standards.

• Extended lifecycle and durability testing by an Independent 3rd party laboratory:

— Mortise Locks over 9 million cycles.

— Cylindrical Locks over 3 million cycles.

— Door Closers over 2 million cycles.

— Exit Devices over 2 million cycles.

WHAT DOES THE AbilityOne® PROGRAM MEAN:

• When PDQ® / SKILCRAFT® products are procured, meaningful work has been provided to individuals who are visually impaired or blind. This would include veterans who served in our Armed Forces and are physically disabled.

• Compliance with FAR 52.208-9 means PDQ® / SKILCRAFT® products designated as mandatory use items are specified for new construction/major renovations and maintenance of all federally funded buildings.

• It means that PDQ® /SKILCRAFT® products assigned NSNs (National Stock Numbers) simplify the federal agency acquisition process.

Main Offices and Manufacturing Center:

2754 Creek Hill Road • Leola, PA 17540 • 800.441.9692 • 717.656.6892 Fax

Regional Distribution Centers: Kansas City, MO Salt Lake City, UT Seattle, WA www.pdqlocks.com

ABOUT PDQ:

PDQ Manufacturing was founded in 1983 as a distributor of Door Hardware. A few years later the company’s founder, Bill Tell, put together his own team of engineers to develop, manufacture and distribute a complete line of products sold in the United States and all over the world. Today PDQ remains a family owned and managed US based manufacturer, located in Lancaster, Pennsylvania, offering products with quality materials, durably designed, built to last, and for a majority of our products - Made in the USA.

MORTISE LOCKS CYLINDRICAL LOCKS

RIM AND VERTICAL

ROD EXIT DEVICESDOOR CLOSERS STAND ALONE

KEYPAD LOCKS

CERTIFICATIONS/COMPLIANCES/

LISTINGS/APPROVALS

• Underwriters Laboratories (UL).

• Builders Hardware Manufacturers Association (BHMA).

• Certified Products Listings (CPD).

• Florida Building Commission, Hurricane Listed.

• Windstorm Rated.

• Americans with Disabilities Act (ADA).

• ICC/ANSI 117.1 for Accessible and Usable Buildings.

• Unified Facilities Guide Specification 08 71 00

(August 2008).

• Buy American Act (BAA).

• Trade Agreements Act (TAA).

• LEED® Recycled Content 32% to 54%.

• Contributes to LEED® Credits 2.1, 4.1 and 4.2.

- Recycled Content from 32% to 54%.

PAST PERFORMANCE LOCATIONS

AFFILIATIONS/TRADE ASSOCIATIONS

• Society of American Military Engineers (SAME).

• Builders Hardware Manufacturers Association (BHMA).

• Design Build Institute of America (DBIA).

• Construction Specifications Institute (CSI).

• American Institute of Architects (AIA).

• Modular Building Institute (MBI).

• Door and Hardware Institute (DHI).

• Associated Locksmiths of America (ALOA).

Osan Air Base Officers Quarters, South Korea

NATO Headquarters Norfolk, Virginia

Lake County Veterans Administration Baldwin, Michigan

CAPABILITIES STATEMENT

See www.pdqlocks.com for more past performance locations.

MR SERIES

GRADE 1

MORTISE LOCK

DALLAS LEVER

(DJEW)

PHILADELPHIA LEVER

(PJEW)

BALL KNOB

(KJEW)

LEVER DESIGNS

SPECIFICATIONS

FOR DOORS: • 1-3/4”.

BACKSET: • 2-3/4”.

CASE: • 13-gauge cold rolled steel mechanism. • Dichromated for corrosion resistance.

ARMOR FRONT: • Beveled 1/8” on 2”. • Stainless steel.

HANDING: • Chassis set for RH (default). • Left Hand, contact agency. • Field reversible.

STRIKE: • Handed Curved Lip (default). • Stainless steel.

LATCHBOLT: • 3/4” Throw. • Investment Cast Stainless Steel. • Anti-friction.

DEADBOLT: • 1” Throw. • Investment Cast Stainless Steel.

TRIM: • JW Wide Escutcheon trim, PHL, DAL levers - stainless steel.

CONVENTIONAL CYLINDER: • Sold separately. Contact agency.

INTERCHANGEABLE CORE HOUSING: • Supplied with Best® SFIC compatible housing (default).

• Large format (Schlage® LFIC compatible) available. Contact agency.

INTERCHANGEABLE CORE: • Small and large format interchangeable cores sold separately. Contact agency.

KEYING, KEYWAYS: • Included when cylinder or interchangeable core is specified/ordered. Most keyways available including Schlage C and Best A. Contact agency.

FINISHES: • 630 (US32D) Stainless Steel.

CERTIFICATIONS, LISTINGS

COMPLIANCES: • UL/CUL 10C listed for 3 hrs, for single doors up to 4’0” x 8’0”.

• Certified to ANSI/BHMA 156.13-2005 Operational Grade 1 and Security Grade 1.

• Florida Building Code HVHZ (High Velocity Hurricane Zone) listed, FL 21376.

Maximum design load rating: ± 80 PSF for single doors 3’ x 7’ (All locking functions with deadbolt).

• Complies with ADA (Americans with Disabilities Act) and ICC/ANSI 117.1 for Accessible and Usable Buildings.

• Complies with Unified Facilities Guide Specification 08 71 00 (August 2008).

WARRANTY: • Lifetime Limited Warranty.

COUNTRY OF ORIGIN: • Proudly assembled in the U.S.A. with U.S. and foreign material.

Meets requirements of the Buy American Act.

AbilityOne® REGULATORY FRAMEWORK: • Public Law:

- Wagner-O’day Act of 1938 For National Industries For The Blind (NIB).

- Javits Amendment of 1971.

• Code Of Regulations:

- FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services.

• Competition:

- Exemption From The Competition In Contracting Act.

- FAR Subpart 6.3 Other Than Full & Open Competition.

- 6.302-5 Authorized Or Required By Statute.

PHILADELPHIA (PJEW) LEVERDALLAS (DJEW) LEVER BALL (KJEW) KNOB

3 5 8 "

2 1 2 "

8"

2 9 16 "

5 3 4 "

2 "

2 "

2 1 2 "

3- 5⁄8”

2- 1⁄2”

5- 3⁄4” 2 -9⁄16”

8”

3 5 8 "

2 1 2 "

8"

2 9 16 "

5 3 4 "

2 "

2 "

2 1 2 "

1⁄2” 2- 1⁄2”

1⁄2”

6 1 8 "

3 5 8 "

2 1 2 "

8"

2 9 16 "

2 "

2 "

2 7 8 "

3- 5⁄8”

2- 1⁄2”

6-1⁄8” 2-9⁄16”

8”

6 1 8 "

3 5 8 "

2 1 2 "

8"

2 9 16 "

2 "

2 "

2 7 8 "

1⁄2” 2 -7⁄8”

1⁄2”

1 2

5 8

8"

2 9 16 "

1 2

1 8

Ø 2 1 8 "

3- 5⁄8”

2 -1⁄2”

2 -9⁄16”

8”

1 2

5 8

8"

2 9 16 "

1 2

1 8

Ø 2 1 8 "

1⁄2” 3-1⁄8”

2- 1⁄8”

LEVER DESIGNS AND DIMENSIONS

FUNCTIONS

Classroom Hold Back

(Single Cylinder)

MR113

• Latchbolt operated by lever from inside

• Key outside retracts latchbolt

• Rigid outside lever

• Auxiliary latch deadlocks latchbolt

• Key outside secures latchbolt when latchbolt is retracted by inside lever

F06

Storeroom MR115

• Latchbolt operated by lever from inside

• Key outside retracts latchbolt

• Rigid outside lever

• Auxiliary latch deadlocks latchbolt

F07

Entry MR116

• Latchbolt operated by lever from either side

• Toggle locks/unlocks outside lever

• Key outside retracts latchbolt

• Auxiliary latch deadlocks latchbolt

F04

Front Door MR117

• Latchbolt operated by lever from either side

• Toggle locks/unlocks outside lever

• Key outside retracts latchbolt

• Key outside extends/retracts deadbolt

• Thumbturn inside extends/retracts deadbolt

F08 or F10

Passage MR126 • Latchbolt operated by lever from either side F01

Entrance/ Storeroom MR135

• Latchbolt operated by lever from either side

• Key outside extends/retracts deadbolt

• Thumbturn inside extends/retracts deadbolt

F21

Dormitory/Exit MR136

• Latchbolt operated by lever from either side

• Key outside extends/retracts deadbolt

• Thumbturn inside extends/retracts deadbolt

• Inside lever simultaneously retracts latchbolt and deadbolt

• Auxiliary latch deadlocks latchbolt

F13

Store Door MR137

• Latchbolt operated by lever from either side

• Key outside extends/retracts deadbolt

• Key inside extends/retracts deadbolt

• Key locks/unlocks outside lever

F14

Classroom SKMR148

• Latchbolt operated by lever from either side

• Key outside retracts latchbolt

• Inside Lever Always Free

• Auxiliary latch deadlocks latchbolt

F05

Entrance MR154

• Latchbolt operated by lever from either side

• Toggle locks/unlocks outside lever

• Key outside retracts latchbolt

• Key outside extends/retracts deadbolt

• Thumbturn inside extends/retracts deadbolt

• Inside lever simultaneously retracts latchbolt and deadbolt

• Auxiliary latch deadlocks latchbolt

• Projecting then retracting the deadbolt releases the toggle

FUNCTION

SKILCRAFT®

FUNCTION

NUMBER

OUTSIDE | INSIDE DESCRIPTION ANSI

NUMBER

Available with option LM - Latch Bolt Monitor

FUNCTIONS

Dormitory MR158

• Latchbolt operated by lever from either side

• Toggle locks/unlocks outside lever

• Key outside extends/retracts deadbolt

• Key inside extends/retracts deadbolt

• Inside lever simultaneously retracts latchbolt and deadbolt

• Auxiliary latch deadlocks latchbolt

F11

Apartment/ Corridor MR162

• Latchbolt operated by lever from either side

• Toggle locks/unlocks outside lever

• Key outside retracts latchbolt

• Key outside extends/retracts deadbolt

• Thumbturn inside extends/retracts deadbolt

• Inside lever simultaneously retracts latchbolt and deadbolt

• Auxiliary latch deadlocks latchbolt

F20

Privacy MR176™

• Latchbolt operated by lever from either side

• Emergency coin turn outside unlocks outside lever

• Thumbturn inside locks/unlocks outside lever

• Closing door unlocks outside lever

• Rotating inside lever unlocks outside lever

F01

Apartment SKMR186

• Latchbolt operated by lever from either side

• Key inside locks/unlocks outside lever

• Key outside retracts latchbolt

• Auxiliary latch deadlocks latchbolt

F09

Electrified Storeroom SKMR199A

• Key outside retracts latchbolt

• Latchbolt operated by lever from inside

• Auxiliary latch deadlocks latchbolt

• Fail safe – latchbolt operated by lever from outside unless electrically locked

• Fail secure – latchbolt operated by lever from outside when electrically unlocked

• Motor drive locking/unlocking

• Not field reversible

• Specify handing

FUNCTION

SKILCRAFT®

FUNCTION

NUMBER

OUTSIDE | INSIDE DESCRIPTION ANSI

NUMBER

CROSS REFERENCE

ANSI FUNCTION SKILCRAFT®

LOCK FUNCTION BEST CORBIN DORMA SARGENT SCHLAGE YALE

F06 MR113 45HR/HB ML2056 M9076 8289 L9076 AU8800

F07 MR115 45HD ML2057 M9080 8204 L9080 AU8805FL

F04 MR116 45HA ML2051 M9050 8205 L9050 AU8807FL

F08/F10 MR117 — — — — — —

F01 MR126 45HN ML2071 M9010 8215 L9010 AU8801FL

F21 MR135 45HB ML2024 M9973 8224 L9473 AU8860FL

F13 MR136 45HT ML2065 M9956 8225 L9456 AU8822FL

F14 MR137 45HG ML2017 M9966 8226 L9466 AU8860-2FL

F105 MR148 — — — — — —

— MR154 — — — — — —

F11 MR158 N/A N/A M9957 N/A N/A AU8800

F20 MR162 45HAB ML2067 M9953 8243 L9453 AU8847FL

F22 MR176 45HLT ML2060 M9040 8265 L9040 AU8862FL

— SKMR186 45HC ML2042 ML9060 8216 L9060 AU8817-2FL

— SKMR199A 45HEL/45HEU ML22904 M9080EL/M9080EU 8270 L9080EL/L9080EU AU8890FL/AU8891FL

LEVER AND KNOB OPTIONS LEVER DESIGN BEST CORBIN DORMA SARGENT SCHLAGE YALE

LEVER

DALLAS 3 LS LUSTR LT J 03 TUBULAR CR CARMEL

PHILADELPHIA 15 NS NEWPORT LR L 06 RHODES AU AUGUSTA

KNOB K 4 YW KB C 41 PLYMOUTH LF LITCHFIELD

Information on this sheet is compiled from public documents and third parties. SKILCRAFT® makes no guarantees as to their accuracy, content, quality or availability.

Comparisons were made using the technical features only and are not commercial comparisons. Final suitability should be determined by a professional AbilityOne® Architectural Hardware Consultant.

• Available with options:

LM - Latch Bolt Monitor REX - Request to Exit

ORDERING GUIDE

HOW TO ORDER GUIDE:

NSN:

• USE 5340-00-NIB PLUS A FOUR DIGIT CODE FROM THE TABLE ABOVE*.

• EXAMPLE, TO ORDER A MORTISE LOCK WITH A PASSAGE FUNCTION, PHILADELPHIA LEVER, SELECT THE FOUR DIGIT CODE 0139.

• NSN #: 5340-00-NIB-0139.

SK SERIES:

• EXAMPLE, TO ORDER A MORTISE LOCK WITH A CLASSROOM FUNCTION, BALL KNOB, SELECT SKMR148KJEW-630.

SKILCRAFT®

FUNCTION

FUNCTION

DESCRIPTION KEYED DEADBOLT ANSI

FUNCTION

Dallas Lever Philadelphia Lever Ball Knob

126 Passage No No F01 0283 0139* 0282

116 Entry Yes No F04 0281 0138 0280

148 Classroom Yes No F05 SKMR148DJEW-630 SKMR148PJEW-630 SKMR148KJEW-630

113 Holdback Yes No F06 0265 0263 0264

115 Storeroom Yes No F07 0279 0137 0278

117 Front Door Yes Yes F08/F10 0268 0266 0267

186 Apartment Yes No F09 SKMR186DJEW-630 SKMR186PJEW-630 SKMR186KJEW-630

158 Dormitory Yes Yes F11 0274 0272 0273

136 Dormitory/Exit Yes Yes F13 0285 0149 0284

137 Store Door, deadbolt Yes Yes F14 0271 0269 0270

162 Apartment/Corridor Yes Yes F20 0290 0301 0289

135 Room Door, deadbolt Yes Yes F21 0277 0275 0276

176 Privacy No No F22 0292 0141 0291

199A Storeroom, electrified Yes No F07 SKMR199ADJEW-630 SKMR199APJEW-630 SKMR199AKJEW-630

WHAT MAKES A GREAT LOCK

• Independently tested to over 9 Million Cycles (Over 9 times the ANSI/BHMA A156.13-2012 Security Grade 1 Standard).

• Less moving parts than any other Mortise Lock.

• US Patent #5,813,255.

12 ga. Heavy Duty Alloy Steel Case

Independent Single Retractor Hub

Stainless Steel Stop Works Stainless Steel Armor Plate

Stainless Steel Deadlatch

Stainless Steel Deadbolt

Most Functions Accommodate Field Reversible Handing

Stainless Steel Latchbolt and Anti-Friction

Single Cam for All Locking Functions

Four Compression Springs.

Lock Body Designed For ANSI/BHMA 156.115 Mortise Lock Door Prep

GT SERIES

GRADE 1

CYLINDRICAL LOCK

BOSTON

PHILADELPHIA

LEVER DESIGNS

PERFORMANCE • Factory tested to over 3 million cycles (3 times the ANSI/BHMA Grade 1 std).

• Lever torque tested to 2,100 in-lbs (3 times the ANSI/BHMA Grade 1 std).

SPECIFICATIONS

FOR DOORS: • 1-3/4” to 2-1/4” thick. • Preset for 1-3/4” door.

APPLICATION: • Through door thru-bolting. • Fits standard 161 Door prep.

BACKSET: • 2-3/4” standard.

CHASSIS: • Heavy duty cast alloy, investment cast, chromated cold rolled steel, stainless steel and EZAC™ mechanism. Billet Steel spindles for locking functions.

FRONT: • 2-1/4” x 1-1/8”. • Stainless Steel or Wrought Brass.

• Beveled 1/8” in 2”.

STRIKE: • ASA standard. • Stainless Steel or Wrought Brass.

TORQUE RESISTANCE: • Exceeds 2100 in. lbs.

LATCHBOLT: • 9/16” Throw Deadlocking.

HAND: • Non-handed.

TRIM: • Solid cast alloy, PHL, BSN. • 41° Lever Rotation Standard.

• Wrought Brass Roses Concealed Screws.

HOUSING LESS

INTERCHANGEABLE CORE: • Option SFL - BEST® Small Format Compatible.

• Option LFL - Schlage® Large Format Compatible (Available with PHL Lever).

INTERCHANGEABLE CORE: • Small and large format interchangeable cores sold separately. Contact agency.

FINISHES: • 626 (US26D))Satin Chrome.

CERTIFICATIONS, LISTINGS

COMPLIANCES: • UL/CUL 10C listed for 3 hrs, for single doors up to 4’0” x 8’0”.

• Certified to ANSI/BHMA A156.2-2011, Grade 1.

• California Education Code Compliant (Functions GT135, GT135LED).

• Federal Specification FF-H-10C (Superseded by A156.2).

• Florida Building Code HVHZ (High Velocity Hurricane Zone) listed, FL 21376.

Maximum design load rating: ± 70 PSF for single doors 3’ x 7’.

• Complies with ADA (Americans with Disabilities Act) and ICC/ANSI 117.1 for Accessible and Usable Buildings.

WARRANTY: • Twenty-five year Limited Warranty.

COUNTRY OF ORIGIN: • Assembled in the U.S.A. with U.S. and foreign material.

Meets requirements of the Buy American Act.

AbilityOne®

REGULATORY FRAMEWORK: • Public Law:

- Wagner-O’day Act of 1938 For National Industries For The Blind (NIB).

- Javits Amendment of 1971.

• Code Of Regulations:

- FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services.

• Competition:

- Exemption From The Competition In Contracting Act.

- FAR Subpart 6.3 Other Than Full & Open Competition.

- 6.302-5 Authorized Or Required By Statute.

31⁄16”

33⁄8”

415⁄16”

1⁄2”

3”

33⁄8”

51⁄16”

7⁄16”

BOSTON (BSN) LEVER

PHILADELPHIA (PHL) LEVER

LOCK FUNCTIONS

NON KEYED

Storeroom GT115 • Latchbolt operated by inside lever or key in outside lever

• Outside lever always fixed F86

Entrance GT116

• Latchbolt operated by lever from either side or key in outside lever

• Outside lever locked by push/turn button on inside

• When outside lever is locked by push button on inside – key from outside, or rotating inside lever unlocks outside lever

• When outside lever is locked by pushing and turning button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever

F109

Exit GT124

• Latchbolt operated by inside lever at all times

• Outside lever always fixed

• Outside lever has non-removable security features

F89

Passage / Closet GT126™ • Latchbolt operated by lever from either side at all times F75

Classroom Intruder

GT135

• Latchbolt operated by lever from either side

• Key in either lever locks outside lever

• Key in either lever unlocks outside lever

• Inside lever always free

F110

GT135LED

• Red LED Outside Lever Status Indicator

• Lock Directional Arrow

• Patented (U.S. Patent #9,187,928)

Store Door GT137

• Latchbolt operated by lever from either side

• Both levers locked by key from either side

• Both levers unlocked by key from either side

F91

Communicating GT141 • Latchbolt operated by lever from either side

• Key in either side locks or unlocks its own lever independently F80

Classroom SKGT148

• Latchbolt operated by lever from either side

• Outside lever locked by key from outside

• Outside lever unlocked by key from outside

• Inside lever always operates latch

F84

Dormitory / Corridor GT165

• Latchbolt operated by lever from either side or key in outside lever

• Outside lever locked by key on outside or push button on inside

• Outside lever unlocked by key in outside lever, closing door, or rotating inside lever

• Inside lever always free

F90

Privacy Bedroom / Bathroom

GT176™

• Latchbolt operated by lever from either side or emergency release in outside lever

• Outside lever locked by push button on inside

• Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door

F76

Electrified Storeroom SKGT199

• Key outside retracts latchbolt

• Latchbolt operated by lever from inside

• Auxiliary latch deadlocks latchbolt

• Fail safe–latchbolt operated by lever from outside unless electrically locked

• Fail secure–latchbolt operated by lever from outside when electrically unlocked

• Accepts 12VDC@.6A, 12VAC@.6A, 24VDC@.3A and 24VAC@.3A

• Furnished with 6” wire leads

FUNCTION

SKILCRAFT®

FUNCTION

NUMBER

INSIDE | OUTSIDE DESCRIPTION ANSI

FUNCTION

ANSI # / FUNCTION SKILCRAFT® BEST CORBIN DORMA SARGENT SCHLAGE YALE

F86

STORE ROOM GT 115 D CL3357 C880 10G04 ND80PD 4705LN

F109

ENTRANCE GT 116 AB CL3351 C850 10G05 ND53PD 4704LN

F75

PASSAGE GT 126 N CL3310 C810 10U15 ND10S 4701LN

F110

INTRUDER CLASSROOM GT 135 IN CL3352 C877 10G38 ND95PD 4718LN

F110

INTRUDER CLASSROOM

W/LED INDICATOR

GT 135 LED

PDQ Exclusive N/A N/A N/A N/A N/A N/A

F84

CLASSROOM GT 148 R CL3355 C870 10G37 ND70PD 4708LN

F76

PRIVACY GT 176 L CL3320 C840 10U65 ND40S 4702LN

CROSS REFERENCE

SCHOOL SECURITY SOLUTIONS

GT 135 LED Classroom Intruder Cylindrical Lock, patented (US Patent #9,187,928), is designed to allow a staff member to use the inside cylinder to lock the outside of the door, without compromising safety to the occupants in the room. But how does a staff member know if the outside lever is locked? Until now, it required opening the door and checking the lever. The Classroom Intruder function eliminates the need to open the door. Simply press the button on the lock, and…if the Red LED lights up, the outside lever is locked and secure. If the Red LED does not light up, this indicates the outside lever is not locked and secure.

FEATURES

• Complies with California Education Code (Functions GT135, GT135LED).

• Red LED (Light Emitting Diode) outside lever status indicator.

• Pushing the button located on the rose of the inside lock, Red LED illuminates indicating the outside lever is locked.

• Offered with cylinder housings compatible with Best® Small Format

Inter-changeable cores, Schlage® Large Format Interchangeable cores and most others.

• Large Format Inter-changeable cores only available with PHL lever.

• Keying options available, compatible with most key systems.

• Battery life rating: 10 years*.

• Battery type: CR1220.

*Battery tested to over 7,300 illumination cycles. Ten year life rating is calculated using one second per illumination at two illuminations per day, 365 days per year over ten years.

OUTSIDE LEVER UNLOCKED TO CHECK THE SECURITY OF THE

OUTSIDE LEVER, PRESS THE BUTTON.

IF THE RED LED ILLUMINATES, THAT

CONFIRMS THE OUTSIDE LEVER IS

LOCKED AND SECURE.

Information on this sheet is compiled from public documents and third parties. SKILCRAFT® makes no guarantees as to their accuracy, content, quality or availability. Comparisons were made using the technical features only and are not commercial comparisons. Final suitability should be determined by a professional AbilityOne® Architectural Hardware Consultant.

SKILCRAFT® MODEL NUMBER DESCRIPTION GUIDE

SERIES FUNCTION LEVER FINISH BACKSET STRIKE CYLINDER HOUSING

GT 115 PHL 626 234 ASA SFL

SFL — BEST compatible SFIC Housing less core

LFL — Schlage© Compatible LFIC Housing less core

PHL — PHILADELPHIA (Default)

BSN — BOSTON

See function table above

ORDERING GUIDE

SFL = BEST compatible small format less core.

LFL = Schlage large format (full size) less core.

SKILCRAFT®

FUNCTION

FUNCTION

DESCRIPTION KEYED LEVER

HOUSING ANSI

BOSTON LEVER PHILADELPHIA LEVER

126 Passage No N/A F75 0254 0134

176 Privacy No N/A F76 0255 0136

141 Communicating Yes

SFL

F80 0245 0244

LFL N/A 0246

182 Entry Yes

SFL

F82 0257 0256*

LFL N/A 0258

148 Classroom Yes

SFL

F84

SKGT148BSN-626234ASASFL SKGT148PHL-626234ASASFL

LFL N/A SKGT148PHL-626234ASALFL

115 Storeroom Yes

SFL

F86 0252 0132

LFL N/A 0253

128 Institution Yes

SFL

F87 0242 0241

LFL N/A 0243

124 Exit No N/A F89 0240 0239

165 Dormitory Yes

SFL

F90 0248 0247

LFL N/A 0249

137 Store Door Yes

SFL

F91 0237 0236

LFL N/A 0238

116 Entrance Yes

SFL

F109 0250 0133

LFL N/A 0251

135 Classroom Intruder Yes

SFL

F110 0259 0135

LFL N/A 0260

135LED Classroom Intruder with LED Yes

SFL

F110

0262 0261

LFL N/A N/A

199A Storeroom, electrified Yes

SFL

SKGT199BSN-626234ASASFL SKGT199PHL-626234ASASFL

LFL N/A SKGT199PHL-626234ASALFL

HOW TO ORDER GUIDE:

NSN:

• USE 5340-00-NIB PLUS A FOUR DIGIT CODE FROM THE TABLE ABOVE.*

• EXAMPLE, TO ORDER A CYLINDRICAL LOCK WITH AN ENTRY FUNCTION,

PHILADELPHIA LEVER LESS CORE , SELECT THE FOUR DIGIT CODE 0256.

• NSN #: 5340-00-NIB-0256.

SK SERIES:

• EXAMPLE, TO ORDER A CYLINDRICAL LOCK WITH A CLASSROOM INTRUDER

FUNCTION (ANSI F84), BOSTON LEVER, SELECT SKGT148BSN-626234ASASFL.

THE STORY BEHIND THE SKILCRAFT® GT SERIES CYLINDRICAL LOCK

-INDUSTRY FIRSTS:

-STRONGEST IN THE INDUSTRY.

LEVER TORQUE RESISTANCE

EXCEEDS 3 TIMES THE ANSI/

BHMA GRADE 1 STANDARD.

BUT WHAT DOES THIS LEVER TORQUE RESISTANCE MEAN?

• Eliminates the need for clutching/breakaway feature!!

ANSI/BHMA

Less than One Gorilla

GT Series Can Hold More Than Two 500 lb Gorillas

GT

2,200 in-lbs

OVER 3X

2”

BHMA

in-lbs

TRIPLE THICK LEAF SPRING HELPS ELIMINATES

LEVER SAG FOR OVER 3 MILLION CYCLES (3

TIMES THE ANSI/BHMA GRADE 1 STANDARD)

CAST ALLOY SPINDLE YIELDS OVER 2,100

IN-LBS LEVER TORQUE RESISTANCE (3 TIMES

THE ANSI/BHMA GRADE 1 STANDARD). NO

CLUTCHING MECHANISM REQUIRED

OVERSIZE STAINLESS STEEL LOCKING TIP AND BILLET STEEL

SPINDLE LEVER TORQUE RESISTANCE RATED FOR OVER 2,100

IN-LBS (3 TIMES THE ANSI/BHMA GRADE 1 STANDARD) FOR THE

GT SERIES, AND OVER 3,000 IN-LBS (OVER 4 TIMES THE ANSI/

BHMA GRADE 1 STANDARD) FOR THE XGT SERIES

VANDAL RESISTANT

HEAVY DUTY CAST LEVERS

ANTI-ROTATION THROUGH

BOLTS AT 6 AND 12 O’CLOCK

CAST ALLOY

CHASSIS

HEAVY GAGE STEEL ANTI ROTATION PLATE IS KEYED TO THE CHASSIS IN 3

LOCATIONS TO RESIST THE MOST EXTREME AND ABUSIVE SITUATIONS.

2:1 RATIO

FOR 41 DEGREE

LEVER ROTATION 7/8” DIA BRASS

LATCH BOLT WITH

9/16” THROW

THREAD LOCK PATCH STANDARD

ON ASSEMBLY AND MOUNTING

FASTENERS KEEPS THE LOCK BODY

INTACT IN THE MOST CHALLENGING

HIGH USE INSTALLATIONS.

SERIES

HEAVY DUTY GRADE 1

RIM EXIT DEVICE

RIM ANSI TYPE 1

SPECIFICATIONS

CHASSIS:

RAIL:

TOUCH PAD:

LATCH:

STRIKE/BACKSET:

PROJECTION:

HAND:

DOGGING:

MINIMUM STILE WIDTH:

DOOR THICKNESS:

DOOR WIDTH:

FINISHES:

FASTENERS:

MOUNTING HEIGHT:

CERTIFICATIONS, LISTINGS

COMPLIANCES:

WARRANTY:

AbilityOne®

REGULATORY FRAMEWORK:

• Corrosion resistant plated steel.

• Extruded aluminum.

• Stainless steel.

• Pullman with dead latching, stainless steel, 3/4” throw.

• Supplied standard for 161 prep with 5/8” stop and door gap of 1/8”.

• 3-1/16” (78mm) projection. • 2-19/32” (66mm) projection when dogged.

• Device is non-handed.

• Hex key dogging standard. • No dogging on fire listed devices. • Cylinder dogging kits available.

• No dogging on fire listed devices.

• 4-1/4”.

• 1-3/4”.

• From 36” up to 48”.

• 630 – Satin Stainless Steel.

• Device supplied with sex nuts, machine screws and wood screws.

• Device centerline from finished floor: 40” (1016mm).

• UL/ULC 305 listed for “Panic”, UL10C Listed for “Fire Exit Hardware” up to 3 hours for 4’0” x 8’0” maximum single, 8’0” x 8’0” maximum pairs.

• Certified to ANSI/BHMA A156.3-2001 Grade 1.

• Florida Building Code HVHZ (High Velocity Hurricane Zone) listed, FL21376. Maximum design load ratings:

± 70 PSF for single doors 3’ x 7’, ± 65 PSF for pairs of doors 6’ x 7’ with SK9200 Series Mullion. Specify “WS”.

• Meets requirements of the Buy American Act. • Complies with ADA (Americans with Disabilities Act)

• Ten (10) year limited warranty. and ICC/ANSI 117.1 for Accessible and Usable Buildings.

• Public Law:

- Wagner-O’day Act of 1938 For National Industries For The Blind (NIB).

- Javits Amendment of 1971.

• Code of Regulations:

- FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services.

• Competition:

- Exemption From The Competition In Contracting Act.

- FAR Subpart 6.3 Other Than Full & Open Competition.

- 6.302-5 Authorized Or Required By Statute.

DESCRIPTION SKILCRAFT® CORBIN DORMA FALCON PRECISION SARGENT VON DUPRIN YALE

RIM, HEX DOGGING 6200R/6200RA ED5200 9300 18-R APEX 2100 8800 99-EO 7100

RIM, FIRE LISTED 6200RF/6200RFA ED5200A F9300 F-18-R ED5200A APEX FL2100 99EO-F 7100F

CROSS REFERENCE

Information on this sheet is compiled from public documents and third parties. SKILCRAFT® makes no guarantees as to their accuracy, content, quality or availability. Comparisons were made using the technical features only and are not commercial comparisons. Final suitability should be determined by a professional AbilityOne® Architectural Hardware Consultant.

SURFACE VERTICAL ROD ANSI TYPE 2

DESCRIPTION SKILCRAFT® CORBIN DORMA FALCON PRECISION SARGENT VON DUPRIN YALE

SURFACE VERTICAL ROD

HEX DOGGING 6200V/6200VA ED5400 9400 18-V APEX 2100 8700 9927-EO 7110

SURFACE VERTICAL ROD FIRE LISTED 6200VF/6200VFA ED5400A F9400 F-18-V APEX FL2100 12-8700 9927-EO-F 7110F

CROSS REFERENCE

Information on this sheet is compiled from public documents and third parties. SKILCRAFT® makes no guarantees as to their accuracy, content, quality or availability. Comparisons were made using the technical features only and are not commercial comparisons. Final suitability should be determined by a professional AbilityOne® Architectural Hardware Consultant.

SERIES

HEAVY DUTY GRADE 1

SURFACE VERTICAL ROD

EXIT DEVICE

SPECIFICATIONS

CHASSIS:

RAIL:

TOUCH PAD:

LATCHES:

BACKSET:

PROJECTION:

HAND:

DOGGING:

MINIMUM STILE WIDTH:

DOOR THICKNESS:

DOOR WIDTH:

FINISHES:

FASTENERS:

MOUNTING HEIGHT:

VERTICAL RODS:

CERTIFICATIONS, LISTINGS

COMPLIANCES:

WARRANTY:

AbilityOne®

REGULATORY FRAMEWORK:

• Corrosion resistant plated steel.

• Extruded aluminum.

• Stainless steel.

• Top Latch — Pullman with dead latching 5/8” (16mm) throw.

• Bottom Latch — Pullman with 5/8” (16mm) throw, held retracted during door swing.

• 2-3/4” backset. • Supplied standard for 161 prep with door gap of 1/8”.

• 3-1/16” (78mm) projection. • 2- 19/32” (66mm) projection when dogged.

• Device is non-handed.

• Hex key dogging standard. • No dogging on fire listed devices. • Cylinder dogging kits available. Contact agency.

• No dogging on fire listed devices.

• 4-1/4”.

• 1-3/4”.

• From 36” to 48”.

• 630 – Satin Stainless Steel.

• Device supplied with sex nuts, wood screws and machine screws.

• Device centerline from finished floor: 40” (1016mm).

• ½” (13mm) diameter tubular stock for 7’ doors. Optional rod extensions available for doors up to 10’.

• UL/ULC 305 listed for “Panic”, UL10C Listed for “Fire Exit Hardware” labeled for up to 3 hours for 4’0” x 8’0” maximum single, 8’0” x 8’0” maximum pairs.

• Florida Building Code HVHZ (High Velocity Hurricane Zone) listed, FL21376. Maximum design load ratings:

± 50 PSF for single doors 3’ x 7” and pairs of doors 6’ x 7’. Specify “WS”.

• Certified to ANSI/BHMA A156.3-2001 Grade 1. • Complies with ADA (Americans with Disabilities Act)

• Meets requirements of the Buy American Act. and ICC/ANSI 117.1 for Accessible and Usable Buildings.

• Ten (10) year limited warranty.

• Public Law:

- Wagner-O’day Act Of 1938 For National Industries For The Blind (NIB).

- Javits Amendment Of 1971.

• Code of Regulations:

- FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services.

• Competition:

- Exemption From The Competition In Contracting Act.

- FAR Subpart 6.3 Other Than Full & Open Competition.

- 6.302-5 Authorized Or Required By Statute.

NOTES:

SKILCRAFT® MODEL NUMBER DESCRIPTION GUIDE

DOGGING LABELING FINISH

62 - Exit Device Series R – Rim V – Surface Vertical Rod

A – 48” Default - 3 ft

00 – Hex Key Dogging F – Fire Listed No Designation – Panic Listed (Default) 630 – Satin Stainless Steel

SERIES APPLICATION SIZE

R62 00 F A 630

HOW TO ORDER

SKILCRAFT® MODEL NUMBER NATIONAL STOCK NUMBER

6200 R 630 5340-00-NIB-0144

6200 RA 630 5340-00-NIB-0148

6200 RF 630 5340-00-NIB-0145

6200 RFA 630 5340-00-NIB-0149

6200 V 630 5340-00-NIB-0146

6200 VA 630 5340-00-NIB-0150

6200 VF 630 5340-00-NIB-0147

6200 VFA 630 5340-00-NIB-0151

ORDERING EXAMPLE: NSN 5340-00-NIB-0144 = SKILCRAFT® MODEL NUMBER 6200 R 630.

ELECTRONIC ACCESS CONTROL

MOTORIZED LATCH RETRACTION

FEATURES

• Ultra Quiet Operation.

• For use with SKILCRAFT® 6200 Series exit devices, panic and fire listed.

• Unique motor drive retracts Push Pad.

• Dual operation: maintained or momentary operation.

• Supports remote signaled electric dogging.

• Low power requirements. Interfaces with PDQ’s 81440 2A 24VDC Filtered/

Regulated Power Supply, and EL Series Electrified Power Transfer Hinges.

• Suitable for pairing with Low Energy Power Operators.

• Non-polarized leads.

• On-board diagnostic LED lights.

• UL Listed.

RECOMMENDED POWER SUPPLY

• PDQ Model # 81440.

– Input: 120VAC, .9A, 50/60Hz 240VAC, .6.A, 50/60Hz.

– Output: 24VDC, 2A, filtered and regulated.

• Rated for simultaneous operation of two devices.

• Power Supply Requirements:

– AC/DC Output Voltage – 1A min (filtered and regulated).

• 12-24VDC @ < 1A initial surge (1 sec), 5mA standby after 30 seconds.

– AC Output Voltage.

• 12-24VAC (60Hz) @ < 1A initial surge (1 sec), 15mA standby after 30 seconds.

ELECTRICAL SPECIFICATIONS

• Operating voltage at ± 10% of rated voltage. Input voltage: 24VDC.

• Rated in-rush current: 1.0A.

• Operational in-rush current: .85A.

• Continuous current, electric dogging: .4A.

PERFORMANCE

• Motor drive factory tested to over 500,000 cycles

(Over 2 times the ANSI/BHMA 156.25 Grade 1 STD).

SK81550K-MDT RETROFIT KIT

• Designed to field retrofit SKILCRAFT® 6200 series exit devices.

• Includes motor drive module, connectors and fasteners.

AN

TI

MICROBIAL

C O AT I N G

WHEN IT’S BETTER TO BE SEEN AND NOT HEARD!!

SPECIFY PDQ® MLR SERIES MOTORIZED ELECTRIC LATCH RETRACTION

– Designed for high use and abuse Grade 1 applications.

– Heavy duty cast alloy escutcheon thru-bolts directly into the exit device chassis.

– No exposed set-screws or installation fasteners.

FEATURES

• Designed for use with SKILCRAFT® 6200 series RIM and Surface Vertical Rod exit devices.

• Compatible with PDQ® 6200 series Concealed Vertical Rod exit devices.

Contact agency.

• Lever remains rigid when locked.

• Simple installation.

• Handing is field reversible.

• Lever rotation: 28 degrees.

CERTIFICATIONS, COMPLIANCES, LISTINGS

• ANSI/UL10C and CAN/ULC-5104 Listed for “Fire Exit Hardware” up to 3 hours for

4’0” x 8’0” maximum single, 8’0” x 8’0” maximum pairs.

• Certified to ANSI/BHMA A156.3-2008.

• Lever designs comply with ADA (Americans with Disabilities Act) and ICC/ANSI

117.1 for accessible and Usable Buildings.

• Assembled in the U.S.A. with U.S. and foreign material.

Meets requirements of the Buy American Act.

CONVERSION KITS AVAILABLE FOR

CHANGING FUNCTIONS IN THE FIELD.

• For changing from 08 Classroom to 09 Storeroom, order 629089.

• For changing from 09 Storeroom to 08 Classroom, order 629098.

SK6 EW SERIES HEAVY DUTY EXIT DEVICE TRIM

PHL - PHILADELPHIABSN - BOSTON

LEVER DESIGNS

TYPE LEVER SHAPES SPECIAL FINISH

COATING HOUSING

EW — Escutcheon Wide Stile

BSN — Boston PHL — Philadelphia AM — Anti-microbial

SF7L — SFIC 7 Pin Housing less core LFL — Schlage© Compatible LFIC Housing less core

SK6 EW PHL 08 626 — D

SK6

02 — Dummy (Rigid Lever) 08 — Classroom 09 — Storeroom 14 — Passage

626 — Satin Chrome

SERIES ANSI FUNCTION FINISH

HOW TO ORDER

Ordering Example: SK6 EW 08 PHL 626 SFL7

- Denotes factory default

Notes:

1 - All levers field handed.

2 - Door thickness - 1-3/4”.

3 - For other door thickness applications, contact Customer Service.

4 - Other finishes available. Contact Customer Service.

CYLINDER HOUSING REFERENCE GUIDE

LENGTH

INCLUDES CAM

TYPE LENGTH PDQ CAM

NUMBER

SFIC Housing, 7 Pin 1-3/8” I54031

LFIC Housing 1-1/2” I54231

SK 6EW SERIES HEAVY DUTY EXIT DEVICE TRIM

SERIES

GRADE 1 DOOR CLOSER

SPECIFICATIONS

HANDING:

OPERATION:

BODY:

ARM:

ARM OPTIONS:

PISTON:

ADJUSTMENT:

FACTORY DEFAULT

SPRING SETTING:

SIZE:

MOUNTING:

COVER:

FINISHES:

CERTIFICATIONS

LISTINGS

REGULATORY FRAMEWORK:

CROSS REFERENCE

• Non-handed.

• Rack and pinion design.

• High strength aluminum alloy.

• Flat style arm assembly.

• Hold open arm. • DS/DSHO heavy duty parallel stop arm.

• Spring Cushion Stop for DS/DSHO.

• Hardened steel.

• Adjustable controlled closing.

• Separate hydraulic backcheck standard.

• Separate sweep, latch and backcheck intensity valves.

• Optional adjustable delayed action.

• Common 12” x 3/4” mounting hole pattern retrofits Norton 8300®, Yale 3300®, DORMA 8600 (for more comparisons, see cross reference table).

• Size 3.

• Adjustable BF Plus 1 through 6.

• Fasteners furnished for hollow metal, wood or aluminum doors and frames. • Sex nuts and bolts standard.

• Tri-packed for regular, top jamb and parallel arm installations.

• Full plastic cover standard (non-handed).

• 689 – Aluminum.

• UL and ULC listed. • UL 10C listed.

• Certified to ANSI/BHMA A156.4-2006 Grade 1.

• Complies with ADA (Americans with Disabilities Act) and ICC/ANSI

117.1 for Accessible and Usable Buildings.

• Meets requirements of the Buy American Act.

• Twenty-five year limited warranty.

• Public Law:

- Wagner-O’day Act of 1938 For National Industries For The Blind (NIB).

- Javits Amendment of 1971.

• Code Of Regulations:

- FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services.

• Competition:

- Exemption From The Competition In Contracting Act.

- FAR Subpart 6.3 Other Than Full & Open Competition.

- 6.302-5 Authorized Or Required By Statute.

Information on this sheet is compiled from public documents and third parties. SKILCRAFT® makes no guarantees as to their accuracy, con-tent, quality or availability. Comparisons were made using the technical features only and are not commercial comparisons. Final suitability should be determined by a professional AbilityOne® Architectural Hardware Consultant.

MANUFACTURER SKILCRAFT® CORBIN/

RUSSWIN® DORMA FALCON LCN® NORTON/

YALE® SARGENT® STANLEY®

SERIES

Foot Pattern 12”X 3/4”

DC6200 8616FC SC80FC 4010/4110

(Handed) 8501/3501 350 D-4550

MOUNTING HOLE

PATTERN

RETRO-FIT

YES NO YES YES NO YES NO NO

SPRING CUSHION STOPS

630 SATIN

STAINLESS STEEL

The SCS Series Spring Cushion Stop helps reduce wear and tear on the opening. As the door begins moving through backcheck to its maximum opening angle, the stop acts as a shock absorber, dampening the impact forces.

STOP SHOWN BEFORE

DOOR IS FULLY OPENED

NOTE: PLUNGER SHOWN IN RED TO ENHANCE

THE CUSHIONING FEATURE.

STOP SHOWN WHEN

DOOR IS FULLY OPENED

2-1⁄8”

CROSS REFERENCE

Information on this sheet is compiled from public documents and third parties. SKILCRAFT® makes no guarantees as to their accuracy, con-tent, quality or availability. Comparisons were made using the technical features only and are not commercial comparisons. Final suitability should be determined by a professional AbilityOne® Architectural Hardware Consultant.

MANUFACTURER SKILCRAFT® CORBIN/

RUSSWIN® DORMA LCN® NORTON® SARGENT® YALE®

SERIES 7100 DC8000 8900 4040 7500 281 5800/4400

MOUNTING

HOLE PATTERN

RETRO-FIT

YES NO NO YES NO NO NO

HEAVY DUTY

GRADE 1 DOOR CLOSER

SPECIFICATIONS

HANDING:

OPERATION:

BODY:

ARM:

ARM OPTIONS:

PISTON:

ADJUSTMENT:

ADJUSTMENT VALVES:

FACTORY DEFAULT

SPRING SETTING:

MOUNTING:

COVER:

FINISHES:

CERTIFICATIONS

LISTINGS

REGULATORY FRAMEWORK:

• Non-handed.

• Rack and pinion design.

• High strength cast iron.

• Forged steel main arm. • Flat style arm assembly.

• Hold open arm. • DS/DSHO heavy duty parallel stop arm.

• Spring Cushion Stop for DS/DSHO.

• Hardened steel, 1-1/2” diameter.

• Adjustable controlled closing. • Separate hydraulic backcheck standard.

• Separate sweep, latch and backcheck intensity valves.

• Optional adjustable delayed action.

• All Adjustment Valves are STAKED.

• Size 3.

• Adjustable BF Plus 1 through 6.

• Mounting hole pattern retrofits LCN® 4040 (for more comparisons, see cross reference table).

• Tri-packed for regular, top jamb and parallel arm installations.

• Fasteners for metal and wood doors and frames.

• Sex nuts and bolts standard.

• Full plastic cover standard (non-handed).

• 689 – Aluminum. • UL228 listed.

• Complies with ADA (Americans with Disabilities Act) and ICC/ANSI 117.1.

• ANSI/UL 10C listed for Accessible and Usable Buildings for labeled swinging including 3 hours.

• Certified to ANSI/BHMA A156.4-2006 Grade 1.

• Meets requirements of the Buy American Act.

• Twenty-five (25) year limited warranty.

• Public Law:

- Wagner-O’day Act of 1938 For National Industries For The Blind (NIB).

- Javits Amendment of 1971.

• Code Of Regulations:

- FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services.

• Competition:

- Exemption From The Competition In Contracting Act.

- FAR Subpart 6.3 Other Than Full & Open Competition.

- 6.302-5 Authorized Or Required By Statute.

SPRING CUSHION STOPS

630 SATIN

STAINLESS STEEL

The SCS Series Spring Cushion Stop helps reduce wear and tear on the opening. As the door begins moving through backcheck to its maximum opening angle, the stop acts as a shock absorber, dampening the impact forces.

STOP SHOWN BEFORE

DOOR IS FULLY OPENED

NOTE: PLUNGER SHOWN IN RED TO ENHANCE

THE CUSHIONING FEATURE.

STOP SHOWN WHEN

DOOR IS FULLY OPENED

2-1⁄4”

12-1⁄4”

3-1⁄2”

SKILCRAFT® MODEL NUMBER NATIONAL STOCK NUMBER

5501 BC DS 689 5340-00-NIB-0293

5501 BC DS HO 689 5340-00-NIB-0294

SK5501 BC EDA 689 —

SK5501 BC EDA HO 689 —

5501 BC PA 689 5340-00-NIB-0152

5501 BC PA HO 689 5340-00-NIB-0154

5501 BC SCS 689 5340-00-NIB-0295

7101 BC DS 689 5340-00-NIB-0296

7101 BC DS HO 5340-00-NIB-0297

SK7101 BC EDA 689 —

SK7101 BC EDA HO 689 —

7101 BC PA 689 5340-00-NIB-0153

7101 BC PA HO 689 5340-00-NIB-0155

7101 BC SCS 5340-00-NIB-0298

7141 BC DS 5340-00-NIB-0300

SK 7141 BC EDA —

7141 BC PA 5340-00-NIB-0299

HOW TO ORDER

ORDERING EXAMPLE: NSN 5340-00-NIB-0152 = SKILCRAFT® MODEL NUMBER 5501 BC PA 689, OR ITS COMMERCIAL CROSS

REFERENCE.

SKILCRAFT® MODEL NUMBER DESCRIPTION GUIDE

DELAYED ACTION BACKCHECK FINISH

55 - 5500 Series SK55 - 5500 Series with EDA Extra Duty Arm 71 - 7100 Series SK71 - 7100 Series with EDA Extra Duty Arm

1 - Adjustable 1-6

DS – Door Saver Arm DSHO – Door Saver Hold Open Arm2 EDA - Extra Duty Arm1 EDA HO - Extra Duty Arm Hold Open1,2 HO – Hold Open, Tri-Pack2 PA – Tri-Pack (standard) SCS – Spring Cushion Stop

0 – Non-Delayed Action 4 – Delayed Action

(In Addition To Backcheck)

BC – Adjustable Hydraulic Backcheck (Standard) Backcheck Positioning (Standard)

689 – Aluminum

SERIES SIZE APPLICATION

71 0 1 BC PA 689

Notes:

1 - Requires separate limiting stop by others.

2 - Not appropriate for use on fire labeled doors.

ANSI FUNCTIONS TO SKILCRAFT® MODELS AND NSN’S

ANSI

NUMBER MOUNTING SKILCRAFT®

MODEL NSN

ANSI OPTIONAL SPECIFICATION FEATURES

PT-4A PT-4C PT-4D PT-4E PT-4F PT-4G PT-4H PT-4J

C02011 HINGE SIDE

5501BCPA 5340-00-NIB-0152 X X X X X

7101BCPA 5340-00-NIB-0153 X X X X X X

7141BCPA 5340-00-NIB-0299 X X X X X X X

C02021 PARALLEL

5501BCDS 5340-00-NIB-0293 X X X X X X

5501BCPA 5340-00-NIB-0152 X X X X X

7101BCDS 5340-00-NIB-0296 X X X X X X X

7101BCPA 5340-00-NIB-0153 X X X X X X

7141BCDS 5340-00-NIB-0300 X X X X X X X X

7141BCPA 5340-00-NIB-0299 X X X X X X X

C02041 TOP JAMB

5501BCPA 5340-00-NIB-0152 X X X X X

7101BCPA 5340-00-NIB-0153 X X X X X X

7141BCPA 5340-00-NIB-0299 X X X X X X X

C02051 HINGE SIDE HOLD OPEN

5501BCPAHO 5340-00-NIB-0154 X X X X X

7101BCPAHO 5340-00-NIB-0155 X X X X X X

C02061 PARALLEL HOLD OPEN

5501BCDSHO 5340-00-NIB-0294 X X X X X X

5501BCPAHO 5340-00-NIB-0154 X X X X X

7101BCDSHO 5340-00-NIB-0297 X X X X X X X

7101BCPAHO 5340-00-NIB-0155 X X X X X X

C02081 TOP JAMB HOLD OPEN

5501BCPAHO 5340-00-NIB-0154 X X X X X

7101BCPAHO 5340-00-NIB-0155 X X X X X X

C03011 HINGE SIDE 5501BCPA 5340-00-NIB-0152 X X X X X

C03021 PARALLEL

5501BCDS 5340-00-NIB-0293 X X X X X X

5501BCPA 5340-00-NIB-0152 X X X X X

C03041 TOP JAMB 5501BCPA 5340-00-NIB-0152 X X X X X

C03051 HINGE SIDE HOLD OPEN 5501BCPAHO 5340-00-NIB-0154 X X X X X

C03061 PARALLEL HOLD OPEN

5501BCDSHO 5340-00-NIB-0294 X X X X X X

5501BCPAHO 5340-00-NIB-0154 X X X X X

C03081 TOP JAMB HOLD OPEN 5501BCPAHO 5340-00-NIB-0154 X X X X X

For a complete list of SKILCRAFT® products, go to AbilityOne® catalog.com or contact Customer Service at 1-877-438-5963 or customer_service@nib.org. ©2017 The AbilityOne® Program all rights reserved.

For more information about these or other PDQ products, go to www.pdqlocks.com or 1-800-441-9692

These quality SKILCRAFT® products are proudly assembled by people who are blind from VisionCorps of Pennsylvania.

LT2053 4-2017

The AbilityOne® Program is a Federal Program providing employment opportunities to more than 50,000 people who are blind or have other significant disabilities in the United States.

The AbilityOne® Program uses the purchasing power of the federal government to buy products and services from participating, community-based nonprofit agencies nationwide dedicated to training and employing individuals with disabilities.

Since 1938, National Industries for the Blind (NIB) has enhanced economic and personal independence of people who are blind by creating employment opportunities. Under its brand name Skilcraft®, NIB and its associate agencies supply federal customers with a selection of more than 3,000 quality products.

NIB is one of two nonprofit agencies established to assist with implementation of the Federal AbilityOne® Program. NIB has single source status on Federal procurements destined for set aside under the Program. This allows Federal procurement agencies to streamline acquisition processes and ease contract renewal while maximizing cost-efficiencies and maintaining the highest degree of integrity.

Created by Congress in 1938 (originally as the Wagner-O’Day Act, then amended in 1971 to become Javits-Wagner-O’Day), the act was designed to increase employment and training opportunities for persons who are blind or have significant disabilities through government purchasing of products and services.

The Act established the U.S. AbilityOne® Commission® to administer the Program, determine which products and services should be placed on the Procurement List and to set fair market prices. The Commission was also authorized to designate two national nonprofit agencies to facilitate the Federal procurement of products and services on the Procurement List among community-based nonprofit agencies employing persons who are blind or have significant disabilities. NIB is one of those designated national nonprofits.

The AbilityOne® Program is implemented via the Code of Federal Regulations (41 CFR Ch. 51), FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services, and FAR Part 6.302-5 exempts AbilityOne® contracts from the requirements of the Competition in Contracting Act.

LAWS, REGULATIONS AND POLICY

AbilityOne® HISTORY AbilityOne® PROGRAM STRUCTURE

AbilityOne® PROGRAM REGULATIONS

• Agency inventory

• Other agency excess

• Federal Prison Industries

• AbilityOne® Procurement List

SUPPLIES

• AbilityOne® Procurement List

• Mandatory Federal Supply Schedules

• Optional Federal Supply Schedules

• Federal Prison Industry and Commercial sources

SERVICES

ABOUT THE AbilityOne® PROGRAM

• Wholesale supply sources

• Mandatory Federal Supply Schedules

• Optional Federal Supply Schedules

• Commercial sources

• Javits-Wagner-O’Day Act (JWOD)

— 41 U.S.C. 46-48c

• Code of Federal Regulations

— FAR 52.208-9 Contractor Use of Mandatory Sources of Supply or Services

• 48 CFR Part 8.002 (a)(1)(iv) “top priority source”

— Establishes descending order of priority that Federal Government shall use to satisfy requirements for supplies and services from or through sources and publications

— Products included in this brochure assigned National Stock Numbers have been approved by the US AbilityOne® Commission.

Ref: “Federal Register Procurement List Additions. A Notice by the Committee for Purchase From People Who Are Blind or Severely disabled on 2/9/2016”.