J-0200000-23 ELINs.xlsx

CLIN 0001-Base RW

Total Recurring Work Line Items:

&P Source Selection Information. See FAR 2.101 and 3.104.

CLIN 0002-Base N-RW

Refer to: Section C, Annex 0200000 Management and Administration, Specification Item 2.15.2 Unit Priced Labor (UPL)Work (Negotiated) for description of UPL Work.

Refer to: Section J, Annex 0200000 Management and Administration, Attachment J-0200000-01 Definitions and Acronyms for description of Unit Priced Labor (UPL) Hour and Universal Equipment.

Task order completion times will be specified on each task order.

For self-performed work: the unit price proposed for Sub-ELIN A700AA will be used to determine the labor cost to the Government.

For subcontracted labor: the FBR proposed for Sub-ELIN A700AB will be used to determine the labor cost to the Government.

Refer to: Section C, Annex 0200000 Management and Administration, Specification Item 2.15.2 Unit Priced Labor (UPL)Work (Negotiated) for description of UPL Work.

Refer to: Section J, Annex 0200000 Management and Administration, Attachment J-0200000-01 Definitions and Acronyms for description of Unit Priced Labor (UPL) Hour and Universal Equipment.

Refer to: Section C, Annex 0200000 Management and Administration, Specification Item 2.15.2.1.2 Subcontractor Requirements description of Sub.

Refer to: Section J, Annex 0200000 Management and Administration, Attachment J-0200000-01 Definitions and Acronyms for definition of Sub-Contractor Fixed Burden Rate.

The estimated quantity (in dollars) is provided. A Fixed Burdened Rate (FBR) shall be entered in the Unit Price column. The FBR shall include all direct and indirect factors for management and oversight of subcontracted non-recurring work. Similar to FBR example in J-0200000-01, if a 15% markup is the Contractor's proposed FBR, the Unit Price should be $1.15. During performance, if the lowest subcontractor labor proposal is $1,000.00 and the FBR is $1.15, the labor cost to the Government will be $1,150.00. (DO - Dollars).

The Contractor shall perform Category I Calls to accomplish any work identified within the entire boundary of the installation and will include a wide variety of work.

Category I Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request

As part of the Category I Call, the Contractor has full responsibility for any work identified up to the Category I Work Order Limit of Liability of $2,500 in direct labor and direct material, per Category I Call.

Category II Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request.

As part of the Category II Call, the Contractor has full responsibility for any work identified up to the Category II Work Order Limit of Liability of $5,000 in direct labor and direct material, per Category II Call.

Category III Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request

As part of the Category III Call, the Contractor has full responsibility for any work identified up to the Category III Work Order Limit of Liability of $7,500 in direct labor and direct material, per Category III Call.

Category IV Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request

As part of the Category IV Call, the Contractor has full responsibility for any work identified up to the Category IV Calls Limit of Liability of $10,000 in direct labor and direct material, per Category IV Call.

Category V Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request

As part of the Category V Call, the Contractor has full responsibility for any work identified up to the Category V Calls Limit of Liability of $12,500 in direct labor and direct material, per Category V Call.

Category VI Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request

As part of the Category VI Call, the Contractor has full responsibility for any work identified up to the Category VI Calls Limit of Liability of $15,000 in direct labor and direct material, per Category VI Call.

Category VII Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request

As part of the Category VII Call, the Contractor has full responsibility for any work identified up to the Category VII Calls Limit of Liability of $17,500 in direct labor and direct material, per Category VII Call.

Category VIII Calls shall be completed within the negotiated timeframe unless otherwise agreed to by the customer, contractor and annotated on the CAT call request

As part of the Category VIII Call, the Contractor has full responsibility for any work identified up to the Category VIII Calls Limit of Liability of $20,000 in direct labor and direct material, per Category VIII Call.

available on FEDMALL The Contractor shall replace PTAC unit, up to 2 ton, using existing wall sleeve and branch circuits. The Contractor shall recover refrigerant and dispose of unit according to OEM standards. Work shall be completed within 30 days of receipt of order.

available on FEDMALL The Contractor shall recover refrigerant from refrigerant containing equipment in accordance with Section C, Annex 0200000, Spec Item 2.10.2.2

available on FEDMALL The Contractor shall provide all labor, management, supervision, tools, material, and equipment (Crane with up to 80 TON capacity, operator(s), riggers, etc.) required to perform Unscheduled Crane Services 24 hours per day, seven days per week.

Unscheduled Crane Services shall comply with NAVFAC P-300, NAVFAC P-307, NAVSUP 538, NAVSEA OP-5, and the equipment manufacturer's instructions and manuals. Operators and riggers shall report on site 30 minutes prior to the time specified on the task order.

Mobilization and demobilization shall be included in the Contractor's hourly rate.

available on FEDMALL The Contractor shall provide light, medium, and heavy duty trucking service up to 10,000 pounds GVW and above. This service shall include semi-trailers, tractors and full trailers, trucks with dolly converters and straight trucks. Cargo loads may be oversized and can include construction equipment, parts or pieces of equipment and others miscellaneous equipment.

The Contractor shall obtain all necessary license and permits required by the states to travel public highways.

available on FEDMALL The Contractor shall provide, transport and place sandbags filled with non-cohesive sand.

Sandbag shall be woven polypropylene, polyethylene or polyamide fabric, minimum unit weight 135 g/m2 (four ounces per square yard). Each sand-filled bag shall have a length of 450 mm (18 in), width of 300 mm (12 in), thickness of 75 mm (3 in), and mass of approximately 15 kg (33 lb.).

Fill material shall be non-cohesive, Class 1 or Class 2 permeable material free from clay.

available on FEDMALL The Contractor shall provide change of occupancy maintenance tasks according to prescribe scope below.

Change of Occupancy Level 1

The Unaccompanied Housing (UH) Manager (s) will attempt to give the Contractor at least five days advance notice when a COM is required and any know major work requirements or the Contractor may coordinate an advanced inspection of the unit with the UH Manager via PWD.

As part of the Level 1 COM, the Contractor is fully responsible for any individual occurrence of repair, including replacement up to the COM threshold of $1000 in direct labor and direct material cost for each bedroom per COM order.

Scope Level 1: Vent Cleaning, Interior Hardware matching, Light Globe matching, burned out light bulbs replacement, range hood filter replacement and complete interior room painting (walls, ceilings, cabinets, and closets). All finishing and painting shall be with compatible brands, textures and hardware.

All maintenance, repair, replacement, alteration and minor work must be completed within two calendar days after the Change of Occupancy period begins, as defined above. One additional calendar day will be allowed when the Change of Occupancy period begins on more than five units on a single day, each of the first five units shall be completed within two calendar days. Units six and seven must be completed within three calendar days. Two additional calendar days will be allowed when painting is ordered in conjunction with COM work, for a total of four days of change of occupancy work and painting.

available on FEDMALL The Contractor shall provide change of occupancy maintenance tasks according to prescribe scope below.

Change of Occupancy Level 2

The Unaccompanied Housing (UH) Manager (s) will attempt to give the Contractor at least five days advance notice when a COM is required and any know major work requirements or the Contractor may coordinate an advanced inspection of the unit with the UH Manager via PWD.

As part of the Level 2 COM, the Contractor is fully responsible for any individual occurrence of repair, including replacement up to the COM threshold of $2000 in direct labor and direct material cost for each bedroom per COM order.

Scope Level 2: Removal of carpet and replacing it with solid surface flooring, Vent Cleaning, Interior Hardware matching, Light Globe matching, Burned out light bulbs replacement, range hood filter replacement, complete interior painting (walls, ceilings, cabinets, and closets) and the revamping of cabinets and hardwood floors. All finishing and painting shall be with compatible brands, textures and hardware.

All maintenance, repair, replacement, alteration and minor work must be completed within two calendar days after the Change of Occupancy period begins, as defined above. One additional calendar day will be allowed when the Change of Occupancy period begins on more than five units on a single day, each of the first five units shall be completed within two calendar days. Units six and seven must be completed within three calendar days. Two additional calendar days will be allowed when painting is ordered in conjunction with COM work, for a total of four days of change of occupancy work and painting.

Scope Level 2: Removal of carpet and replacing it with solid surface flooring, Vent Cleaning, Interior Hardware matching, Light Globe matching, Burned out light bulbs replacement, range hood filter replacement, complete interior painting (walls, ceilings, cabinets, and closets) and the revamping of cabinets and hardwood floors. All finishing and painting shall be with compatible brands, textures and hardware.

Source Selection Information. See FAR 2.101 and 3.104.

CLIN 0003-1st Option RW