FA8637-12-D-6002 LAS MODEL CONTRACT - As of Amendment 8.pdf

AWARD / CONTRACT

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

RATING

DO-A1

PAGE of PAGES

1 306

2. CONTRACT (PROC. INST. IDENT.) NO. 3. EFFECTIVE DATE 4. REQUISITION / PURCHASE REQUEST / PROJECT NO.

FA8637-12-D-6002 See Section G

5. ISSUED BY ASC/WWYA CODE FA8615 6. ADMINISTERED BY (IF OTHER THAN ITEM 5) CODE

USAF/AFMC

AERONAUTICAL SYSTEMS CENTER (ASC)

2725 C STREET, BUILDING 553

WRIGHT-PATTERSON AFB OH 45433-7424

SHELLY R. KENDRICKS 937-904-5184

shelly.kendricks@wpafb.af.mil

SCD: C PAS: (NONE)

7. NAME AND ADDRESS OF CONTRACTOR (NO., STREET, CITY, COUNTY, STATE AND ZIP CODE)

8. DELIVERY

FOB Origin Other (see below)

9. DISCOUNT FOR PROMPT PAYMENT

N

10. SUBMIT INVOICES

(4 COPIES UNLESS OTHERWISE

SPECIFIED) TO

THE ADDRESS SHOWN IN

ITEM

See Block

12 CAGE CODE FACILITY CODE

11. SHIP TO / MARK FOR CODE 12. PAYMENT WILL BE MADE BY CODE

See Section F

EFT: T

13. AUTHORITY FOR OTHER THAN FULL AND OPEN COMPETITION 14. ACCOUNTING AND APPROPRIATION DATA

15A. ITEM NO 15B. SUPPLIES/SERVICES 15C. QUANTITY 15D. UNIT 15E. UNIT PRICE 15F. AMOUNT

See Section B

15G. TOTAL AMOUNT OF CONTRACT

16. Table of Contents

SEC DESCRIPTION PAGE(S) SEC DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

A SOLICITATION/CONTRACT FORM 1 I CONTRACT CLAUSES 281

B SUPPLIES OR SERVICES AND PRICES/COSTS 2 PART III - LIST OF DOCUMENTS, EXHIBITS & ATTACHMENTS

C DESCRIPTION/SPECS./WORK STATEMENT 234 J LIST OF ATTACHMENTS 304

D PACKAGING AND MARKING 236 PART IV - REPRESENTATIONS AND INSTRUCTIONS

E INSPECTION AND ACCEPTANCE 237 K REPRESENTATIONS, CERTIFICATIONS AND

F DELIVERIES OR PERFORMANCE 238 OTHER STATEMENTS OF OFFERORS

G CONTRACT ADMINISTRATION DATA 239 L INSTRS., CONDS., AND NOTICES TO

OFFERORS

H SPECIAL CONTRACT REQUIREMENTS 240 M EVALUATION FACTORS FOR AWARD

CONTRACTING OFFICER WILL COMPLETE ITEM 17 OR 18 AS APPLICABLE

17. Contractor’s Negotiated Agreement 18. Award (Contractor is not required to sign this document).

(Contractor is required to sign this document and return 1 copies to issuing office).

Contractor agrees to furnish and deliver all items or perform all services set forth or otherwise identified above and on any continuation sheets for the consideration stated herein. The rights and obligations of the parties to this contract shall be subject to and governed by the following documents: (a) this award/contract, (b) the solicitation, if any, and (c) such provisions, representations, certifications, and specifications, as are attached or incorporated by reference herein. (A ttachments are listed herein.)

Your offer on solicitation number including the additions or changes made by you which additions or changes set forth in full above, is hereby accepted as to items listed above and on any continuation sheets. This award consummates the contract which consists of the following documents: (a) the Government’s solicitation and your offer, and (b) this award/contract. No further contractual document is necessary.

19A. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 20A. NAME OF CONTRACTING OFFICER

19B. Name of Contractor

19C. Date Signed 20B. United States of America

20C. Date Signed by _________________________________ (signature of person authorized to sign) by _________________________________________ (signature of Contracting Officer)

NSN 7540-01-152-8069 STANDARD FORM 26 (Rev 4-85) Previous Editions unusable Prescribed by GSA FAR (48 CFR) 53.214(a)

ConWrite Version 6.13.1 Created 04 May 2012 9:45 AM

PART I - THE SCHEDULE

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

SECTION B FA8637-12-D-6002

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

AIRCRAFT

Noun: LAS AIRCRAFT NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: SOURCE Acceptance: SOURCE

FOB: SOURCE

Descriptive Data:

The Contractor shall manufacture and deliver USAF Military Type Certified (MTC) Light Air Support (LAS) Aircraft in accordance with (IAW) Section J, Attachment 1, "Aircraft Specification Light Air Support (LAS) Aircraft", Section J, Attachment 5, "Statement of Work (SOW) for LAS Aircraft", and Section J, Attachment 31, "Delivered Aircraft Configuration" (or as amended IAW ASC/LAS H036, "Configuration Baselines and Changes").

Offeror shall deliver all aircraft in the Delivered Aircraft Configuration to perform the standard LAS combat mission.

Acquisition for Afghanistan requirement will be at prices established in Section J, Attachment 34, Summary Pricing for IDIQ Contract. Additional delivery orders may be issued in accordance with B040, Ordering Procedures.

INTERIM CONTRACTOR SUPPORT (ICS)

Noun: CONUS ICS LONG LEAD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, the contractor shall provide sufficient spares and support equipment as required to support the cumulative number of aircraft per customer for all CONUS Bases. The contractor's PWS shall list ICS Long Lead items and tasks required; contractor PWS paragraphs:

The requirement for ICS Long Lead shall be determined in accordance with the cumulative quantity range that includes, but does not exceed, the total aircraft supported.

Long Lead items are defined as those with a lead time in excess of 12 months.

Acquisition may be accomplished via delivery orders issued in accordance with B040, Ordering Procedures.

Noun: CONUS ICS BASE ACTIVATION NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, the contractor shall perform base activation to establish a capability to support maintenance and supply requirements for LAS aircraft at an operating base. Base activation is to include, but is not limited to, infrastructure items, office furniture, administrative communications equipment, telecom, internet connectivity installation, storage racks, work benches, and sufficient initial spares and support equipment not purchased under Long Lead. The contractor's PWS shall describe base activation tasks and items required in the contractor PWS paragraphs: ______________.

Noun: CONUS AIRCRAFT ICS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, the contractor shall perform monthly CONUS Aircraft ICS. Monthly CONUS Aircraft ICS includes, but is not limited to, support equipment, repairable spares, maintenance, repair and return, supply chain management, required to (1) meet and sustain the 80% Fully Mission Capable (FMC) rate on fleet-wide basis per month based on 24 hour per day X 7 days per week aircraft availability; and (2) achieve Maintenance Cancellation Rate (MxC) less than or equal to 5%. The contractor's PWS shall describe monthly CONUS AIRCRAFT ICS tasks and items required in the contractor PWS paragraphs: ______________.

ICS support is for each aircraft, per month per cumulative aircraft quantity range stationed at all customer operating Bases, and operating at the LAS fleet ops tempo of 60 hours per month, per aircraft.

Noun: CONUS ICS ADDL FLEET FLIGHT OPERATIONS (OPS) NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, this CLIN covers a fixed price per additional fleet operational flight hour supported on a fleet wide basis above the LAS fleet operations tempo (OPTEMPO) of 60 hours per month, per aircraft billed on the CONUS AIRCRAFT ICS CLINs. The contractor shall perform all additional activities required to support each CONUS ICS additional flight operations hour to continually (1) meet and sustain the 80% Fully Mission Capable (FMC) rate on fleet-wide basis per month based on 24 hour per day X 7 days per week aircraft availability; and (2) achieve Maintenance Cancellation Rate (MxC) less then or equal to 5%. The contractor's PWS shall describe hourly support for CONUS ICS additional fleet flight operations required in the contractor PWS paragraphs: ____________.

Acquisition may be accomplished via delivery orders issued in accordance with B040, Ordering Procedures.

Based on actual fleet flight operations the contractor shall bill per flight hour for each additional operational hour on a fleet wide basis. Billing shall be accomplished on a quarterly basis.

Noun: OCONUS ICS LONG LEAD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 8, PWS for OCONUS Stationed Aircraft ICS, the contractor shall provide sufficient spares and support equipment as required to support the cumulative number of aircraft per customer for all OCONUS Bases. The contractor's PWS shall list ICS Long Lead items and tasks required; contractor PWS paragraphs:

The requirement for ICS Long Lead shall be determined in accordance with the cumulative quantity range that includes, but does not exceed, the total aircraft supported.

Long Lead items are defined as those with a lead time in excess of 12 months.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: OCONUS ICS BASE ACTIVATION NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 8, PWS for OCONUS Stationed Aircraft ICS, the contractor shall perform base activation to establish a capability to support maintenance and supply requirements for LAS aircraft at an operating base. Base activation is to include, but is not limited to, infrastructure items, office furniture, administrative communications equipment, telecom, internet connectivity installation, storage racks, work benches, and sufficient initial spares and support equipment not purchased under Long Lead or Aircraft ICS. The contractor's PWS shall describe base activation task and items required in the contractor PWS paragraphs: ______________.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: OCONUS AIRCRAFT ICS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 8, PWS for OCONUS Stationed Aircraft ICS, the contractor shall perform monthly OCONUS Aircraft ICS. Monthly OCONUS Aircraft ICS includes, but is not limited to, support equipment, repairable spares, maintenance, repair and return, supply chain management, required to (1) meet and sustain the 80% Fully Mission Capable (FMC) rate on fleet-wide basis per month based on 24 hour per day X 7 days per week aircraft availability; and (2) achieve Maintenance Cancellation Rate (MxC) less than or equal to 5%. The contractor's PWS shall describe monthly OCONUS AIRCRAFT ICS tasks and items required in the contractor PWS paragraphs: ______________

Acquisition for Afghanistan requirement will be at prices established in Section J, Attachment 34, Summary Pricing for IDIQ Contract. Additional delivery orders may be issued in accordance with B040, Ordering Procedures.

ICS support is for each aircraft, per month per cumulative aircraft quantity range

Noun: OCONUS ICS ADDL FLEET FLIGHT OPERATIONS (OPS) NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 8, PWS for OCONUS Stationed Aircraft ICS, this CLIN covers a fixed price per additional fleet operational flight hour supported on a fleet wide basis above the LAS fleet operations tempo (OPTEMPO) of 60 hours per month, per aircraft billed on the OCONUS AIRCRAFT ICS CLINs. The contractor shall perform all additional activities required to support each OCONUS ICS additional fleet flight operations hour to continually (1) meet and sustain the 80% Fully Mission Capable (FMC) rate on fleet-wide basis per month based on 24 hour per day X 7 days per week aircraft availability; and (2) achieve Maintenance Cancellation Rate (MxC) less then or equal to 5%. The contractor's PWS shall describe hourly support for OCONUS ICS additional fleet flight operations required in the contractor PWS paragraphs: ______________.

Acquisition for Afghanistan requirement will be at prices established in Section J, Attachment 34, Summary Pricing for IDIQ Contract. Additional delivery orders may be issued in accordance with B040, Ordering Procedures.

Based on fleet flight operations the contractor shall bill per flight hour for each additional operational hour on a fleet wide basis. Billing shall be accomplished on a quarterly basis.

MISSION PLANNING

Noun: MISSION PLANNING STATIONS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 1, Systems Specification for Light Air Support (LAS) Aircraft, paragraphs 3.1.2 and 3.4.1, Mission Planning Systems, the contractor shall provide, delivery and install hardware to easily transfer data to each aircraft. Loadable mission data shall include aircraft configuration and identification, fuel loads with bingo fuel, map updates, flight route, communications settings, weapon settings, and laser designator coding.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: MISSION DEBRIEF SYSTEMS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 1, Systems Specification for Light Air Support (LAS) Aircraft, paragraphs 3.1.2. and 3.4.2, Mission Debrief Systems, the contractor shall provide, deliver and install hardware required to easily transfer data to each aircraft. The Mission Debrief System shall display time correlated significant mission events including aircraft audio, MFDs representations, HUD and EO/IR aiming sensor video. Up to four aircrafts' selective mission data shall be displayed in a synchronized manner.

Acquisition for Afghanistan requirement will be at prices established in Section J, FERRY

1314 RESERVED CLIN (supply)

Noun: RESERVED (CONUS FERRY) NSN: N - Not Applicable

Noun: CONTRACTOR FERRY OCONUS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, SOW for LAS Aircraft, paragraph *; the contractor shall prepare aircraft and ferry to the location(s) described in the Delivery Order. Ferry shall include all painting, decals, preparation, planning, flight (delivery), and returning aircraft to Fully Mission Capable (FMC). CLIN shall be applicable to any OCONUS location.

Contractor is to perform all tasks required to release conditional acceptance upon aircraft delivery.

Acquisition for Afghanistan requirement will be at prices established in Section J, GROUND TRAINING DEVICES

Noun: COMPUTER BASED TRAINER (CBT) GTD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW with Section J, Attachment 2, Systems Specification for CBT GTD, paragraph _______, and Section J, Attachment 6, SOW for GTD, paragraph __________ and ASC/LAS-H032 Ground Training Devices (GTD) delivery/Installation and Inspection Acceptance, the contractor shall deliver and install CBT GTD. The CBT devices (PCs) delivered shall be suitable for conducting training for up to five (5) students at a time.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: BASIC AVIATION TRAINING DEVICE (BATD) GTD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW with Section J, Attachment 3, Systems Specification for BATD GTD, paragraph _______, and Section J, Attachment 6, SOW for GTD, paragraph __________ and ASC/LAS-H032, Ground Training Devices (GTD) delivery/Installation and Inspection Acceptance, the contractor shall deliver and install BATD GTD.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: FLIGHT TRAINING DEVICE (FTD) GTD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW with Section J, Attachment 4, Systems Specification for FTD GTD, paragraph _______, and Section J, Attachment 6, SOW for GTD, paragraph __________ and ASC/LAS-H032, Ground Training Devices (GTD) delivery/Installation and Inspection Acceptance, the contractor shall deliver and install FTD GTD.

Acquisition for Afghanistan requirement will be at prices established in Section J, GROUND TRAINING DEVICES CLS

Noun: COMPUTER BASED TRAINER (CBT) GTD CLS

MAINTENANCE & OPERATION

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 9, PWS for OCONUS CLS for CBT GTDs, the contractor shall perform monthly CLS Maintenance for each CBT GTD stationed at each operating base.

The contractor shall include contractor support and maintenance sufficient to allow for available operation of each CBT. Availability shall include maintenance for automated computer aided lessons, objectives, course syllabus and testing for the CBTs. Support shall be sufficient to continually maintain the requirement for maintenance, operations and updates to maintain a 95% Mission Effectiveness (ME) rating.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: BASIC AVIATION TRAINING DEVICE (BATD) GTD CLS

MAINTENANCE & OPERATION

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 10, PWS for OCONUS CLS for BATD GTDs, the contractor shall perform monthly CLS Maintenance & Operation for each BATD GTD stationed at each operating base. The contractor shall include contractor support and maintenance sufficient to allow for available operation of each BATD for 12 continuous hours per day, six days per week or 312 hours per month equivalent. Availability shall include maintenance & operations for the BATDs. Support shall be sufficient to continually maintain the requirement for maintenance, operations and updates to maintain a 95% Mission Effectiveness (ME) rating.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: ADDITIONAL FLEET BATD GTD CLS MAINTENANCE &

OPERATION

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

Pursuant to Section J, Attachment 10, PWS for OCONUS CLS for BATD GTDs, the contractor shall perform additional CLS Maintenance & Operation hours for each BATD GTD stationed at an operating base as required under this CLIN. Availability may include maintenance & operations for the BATDs. Support shall be sufficient to continually maintain a 95% Mission Effectiveness (ME) rating.

Acquisition for Afghanistan requirement will be at prices established in Section J, Attachment 34, Summary Pricing for IDIQ Contract. Additional delivery orders may be issued in accordance with B040, Ordering Procedures.

Based on actual fleet flight operations the contractor shall bill per flight hour for each

Noun: FLIGHT TRAINING DEVICE (FTD) GTD CLS MAINTENANCE

& OPERATION

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 11, PWS for OCONUS CLS for FTD GTDs, the contractor shall perform monthly CLS Maintenance & Operation for each FTD GTD stationed at each operating base. The contractor shall include contractor support and maintenance sufficient to allow for available operation of each FTD for 12 continuous hours per day, six days per week or 312 hours per month equivalent. Availability shall include maintenance & operations for the FTD. Support shall be sufficient to continually maintain the requirement for maintenance, operations and updates to maintain a 95% Mission Effectiveness (ME) rating.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: ADDITIONAL FLEET FTD GTD CLS MAINTENANCE &

OPERATION

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

Pursuant to Section J, Attachment 11, PWS for OCONUS CLS for FTD GTDs, contractor performance of additional CLS Maintenance & Operation hours for each FTD GTD stationed at an operating base shall be performed under this CLIN. Availability may include maintenance & operations for the FTD. Support shall be sufficient to continually maintain a 95% Mission Effectiveness (ME) rating.

Acquisition for Afghanistan requirement will be at prices established in Section J, AIR ADVISOR PILOT TRAINING (AETC)

Noun: AIR ADVISOR PILOT TRAINING NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 12, PWS for Air Advisor Pilot Training, including but not limited paragraph ____________, the contractor shall train each class, consisting of up to four (4) pilots, as required to train USG instructor pilots to perform flight instructor duties in the LAS aircraft.

Classes are priced per class and more than one class may be ordered per year.

Acquisition for Afghanistan requirement will be at prices established in Section J, AIR ADVISOR MAINTAINER TRAINING (AETC)

Noun: AIR ADVISOR MAINTAINER TRAINING NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 13, PWS for Air Advisor Maintainer Training, including but not limited paragraph ____________, the contractor shall train each class, consisting of up to six (6) students, as required to train USG maintenance personnel to perform maintenance instructor duties on the LAS aircraft.

Classes are priced per class and more than one class maybe ordered per year.

Acquisition for Afghanistan requirement will be at prices established in Section J, ALTERNATE MISSION EQUIPMENT

Noun: EO/IR IMAGING SENSOR NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: EXTERNAL FUEL TANK & MATED PYLON (WITH FAIRING

AS APPLICABLE)

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: TRAVEL POD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: WEAPON PYLON (WITH FAIRING AS APPLICABLE) NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: FLARE/CHAFF MAGAZINE NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: FLARE/CHAFF COVER NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: 50 CAL MACHINE GUN NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______, the contractor shall deliver a 50 caliber machine gun that is in compliance with the aircraft specification.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: MACHINE GUN MAGAZINE NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: MACHINE GUN PORT COVER NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: EO/IR IMAGING SENSOR COVER NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: HUD LASER RANGE FINDER NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: HUD LASER RANGE FINDER COVER NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: PILOT IFR PRACTICE SHIELD/COVER NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: REMOVABLE ARMOR SET NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: ILLUMINATION FLARE DISPENSER NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: 50 CAL MACHINE GUN POD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph__________.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: 2.75" (70 MM) FOLDING FIN ROCKET POD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: CONTRACTOR PROPOSED ADDITIONAL AME NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

SURVIVAL KIT EQUIPMENT

Noun: INFLATABLE LIFE RAFT ASSEMBLY NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: VISUAL SIGNAL DEVICE NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: LIFE RAFT REPAIR KIT NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: FIRST AID KIT NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: SURVIVAL RADIO WITH GPS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: SURVIVAL LOCATOR BEACON WITH GPS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: COMPACTED SLEEPING BAG NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

Noun: CONTRACTOR PROPOSED ADDITIONAL PILOT SURVIVAL

EQUIPMENT

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

EQUIPMENT

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

EQUIPMENT

NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 5, Statement of Work (SOW) for Light Air Support (LAS) Aircraft, paragraph _______.

OTHER COSTS

Noun: CONUS OVER AND ABOVE (CO&A) NSN: N - Not Applicable Contract type: Y - TIME AND MATERIALS Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section H, Special Contract Requirements, ASC/LAS-H003, Over and Above Work , and Procuring Contracting Officer Letter (PCOL), the contractor shall perform work as directed by the contracting officer within the scope of the contract but not covered by the line item(s) for the basic work.

Noun: OCONUS OVER AND ABOVE (OO&A) NSN: N - Not Applicable Contract type: Y - TIME AND MATERIALS Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section H, Special Contract Requirements, ASC/LAS-H003, Over and Above Work, and Procuring Contracting Officer Letter (PCOL), the contractor shall perform work as

Noun: OVER AND ABOVE MATERIALS NSN: N - Not Applicable Contract type: Y - TIME AND MATERIALS Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section H, Special Contract Requirements, ASC/LAS-H003, Over and Above Work, and Procuring Contracting Officer Letter (PCOL), the contractor shall perform work as

Noun: CONUS STUDIES AND ANALYSIS (CS&A) NSN: N - Not Applicable Contract type: Y - TIME AND MATERIALS Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section H, Special Contract Requirements, ASC/LAS-H002, Streamlined Special Studies Acquisition Process, and Procuring Contracting Officer Letter (PCOL), the contractor shall perform work as directed by the contracting officer within the scope of the contract but not covered by the line item(s) for the basic work.

Noun: OCONUS STUDIES AND ANALYSIS (OS&A) NSN: N - Not Applicable Contract type: Y - TIME AND MATERIALS Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section H, Special Contract Requirements, ASC/LAS-H002, Streamlined Special Studies Acquisition Process, and Procuring Contracting Officer Letter (PCOL), the contractor shall perform work as directed by the contracting officer within the scope of the contract but not covered by the line item(s) for the basic work.

Noun: SPECIAL STUDIES MATERIALS NSN: N - Not Applicable Contract type: Y - TIME AND MATERIALS Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section H, Special Contract Requirements, ASC/LAS-H002, Streamlined Special Studies Acquisition, Process and Procuring contracting officer Letter (PCOL) direction, the contractor shall provide Special Studies Materials which shall be billed IAW terms of the contract.

Noun: CONUS SITE SURVEY (SS) NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft LAS ICS, paragraph _____ the contractor site survey shall be adequate to determine if facilities, in the location to be delivered, are sufficient to adequately perform the services required in the PWS.

Contractor is to report the site visit as required.

Noun: OCONUS SITE SURVEY (SS) NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 8, PWS for OCONUS Stationed Aircraft LAS ICS, paragraph _____, and Section J, Attachment 9, 10 and 11, PWSs for OCONUS Contractor Logistics Support (CLS) for GTDs, paragraphs _________, the contractor's site survey shall be adequate to determine if facilities, in the location to be delivered, are sufficient to adequately perform the services required in the PWS. Contractor is to report the site visit as required.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: LAS FLIGHT CERTIFICATION TO USAF MTC STANDARDS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW ASC/FMS-H005, Specification and Standards and Section J, Attachment 5, SOW for LAS Aircraft, paragraph _______(contractor fill in Section J, Attachment 14, MIL-HDBK- 516B, Change 1, Tailored Airworthiness Criteria Checklist (TACC)), the contractor shall perform tasks to: (1) submit a comprehensive, technically sound, realistic and reasonable plan for achieving USAF Airworthiness Military Type Certification (MTC); (2) host and make all required technical personnel available for participation in Technical Interchange Meetings (TIMs) required, as defined by the USG, to achieve MTC; first TIM to be held NLT 30 business days after award; (3) make technical certification data (including required proprietary data) available for USG review; (4) prepare and deliver Airworthiness Specification (CDRL A001) for USG approval not later than 90 days before FCA/PCA.

Adequacy and sufficiency of acceptable standards and methods of compliance shall be determined by the USG. This CLIN is for contractor's performance up to and through aircraft certification.

Acquisition for Afghanistan requirement will be at prices established in Section J, 1367 RESERVED CLIN (supply)

Noun: RESERVED (ENGINEERING CHANGE

PROPOSALS/CONTRACT CHANGE PROPOSALS)

NSN: N - Not Applicable Descriptive Data:

IAW ASC/LAS-H029, Change Management Instructions to include Engineering Change Proposals, Contract Change Proposals, and Nonconforming Items, the contractor shall perform in accordance the negotiated ECP/CCP and provide further certification data as required to meet the USAF Airworthiness MTC for the LAS Aircraft.

Descriptive Data will be described in the change proposal and the deliveries shall be IAW the required change as negotiated. Aircraft or Ground Training Devices (GTDs) applicable Statement of Works (SOWs) shall be incorporated and attached to Section J, Attachment 26, Engineering Change Proposal (ECP)/Configuration Change Proposal (CCP), SOWs.

Noun: AIRCRAFT STORAGE AT FACILITY NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW B040, Ordering Procedures and ASC/FMS-H001, Accelerated Delivery, and the changes clause, FAR 52.243-01, Changes-Fixed Price and 52.243-03, Changes-Time and Materials, or as directed by PCOL, the contractor shall store and perform routine maintenance as required. Storage shall be priced IAW Section J, Attachment 29 or 30, Labor Rates Matrix.

Noun: NON-RECURRING IMPLEMENTATION OF UID NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The LAS program will not require UID for Delivery Order 0001. Future Delivery Orders, if any and unless otherwise specified, will require UID compliance in accordance with DFARS 252.211-7003 and MIL-STD-130N. All non-recurring costs for implementation of a LAS UID program for LAS aircraft and LAS-unique systems, to include GTDs and Support Equipment, will be negotiated and ordered in accordance with B040, Ordering Procedures. Compliance shall be in accordance with 252.211-7003; with Section J, Attachment 5, SOW for LAS Aircraft; and with Section J, Attachment 6, SOW for LAS

GTD.

Acquisition shall be accomplished through the issuance of individual delivery orders with pricing and delivery derived from Section J, Attachment 34, Summary Variation in Quantity Pricing for IDIQ Contract.

1373 RESERVED CLIN (supply)

Noun: RESERVED (UID FOR MISSION ESSENTIAL AND CRITICAL

ITEMS)

NSN: N - Not Applicable Descriptive Data:

IAW 252.211-7003 Item Identification and Valuation, paragraph (c)(1)(ii) and Section J, Attachment 5, SOW for LAS aircraft and Attachment 6, SOW for LAS GTD, as directed by the contracting officer, the contractor shall mark items identified by the USG as mission essential or critical items.

Delivery orders may be issued in accordance with B040, Ordering Procedures.

If exercised, this CLIN will have the following delivery requirements: Delivery of UID is complete upon successful DD250 of the applicable items IAW DFARS 252.211-7003, Item Identification and Valuation, paragraph (c) (1) (ii).

1376 RESERVED CLIN (supply)

Noun: RESERVED (CONUS CLS UID REQUIREMENTS (GTDS))

Descriptive Data:

IAW 252.211-7003, Item Identification and Valuation, and as directed by the Contracting Officer, the contractor shall perform additional logistics requirements to perform successful CLS implementing UID requirements.

If exercised, this CLIN will have the following delivery requirements: Delivery is complete upon contractor submitted Letter of Completion (LOC) Section J, Attachment 33 and ASC/LAS H030 Certificate of Service (COS) and Letter of Completion (LOC), for invoicing purposes.

Noun: TECHNICAL DATA (DEFERRED ORDERING CLAUSE) NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW DFARS Clause 252.227-7027, Deferred Ordering of Technical Data or Computer Software, and B040, Ordering Procedures, the contractor will deliver a proposal for the delivery of technical data or computer software generated in the performance of this contract or any subcontract hereunder. The form, reproduction and delivery requirement will be provided.

Noun: DATA LAS AIRCRAFT NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall provide data IAW Section J, Attachment 5, SOW for LAS Aircraft.

Data is priced in CLIN _______(contractor fill in).

Noun: DATA GTD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall provide data IAW Section J, Attachment 6, SOW for GTD. Data is priced in CLIN _______(contractor fill in).

Noun: DATA GTD CLS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall provide data IAW Section J, Attachments 9, 10 and11, PWS for OCONUS CLS for CBT Ground Training Devices, PWS for OCONUS CLS for BATD Ground Training Devices and PWS for OCONUS CLS for FTD Ground Training Devices.

Data is priced in CLIN _______(contractor fill in).

Noun: DATA CONUS ICS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall provide data IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS. Data is priced in CLIN _______(contractor fill in).

Noun: DATA OCONUS ICS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall provide data IAW Section J, Attachment 8, PWS for OCONUS Aircraft ICS. Data is priced in CLIN _______(contractor fill in).

Noun: DATA AIR ADVISOR NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

The contractor shall provide data IAW Section J, Attachment 12, PWS for Air Advisor Pilot Training, Section J. Attachment 13, PWS for Air Advisor Maintainer Training. Data is priced in CLIN _______(contractor fill in).

1384 RESERVED CLIN (supply)

Noun: RESERVED (AIRCRAFT SUSTAINMENT & CONTINUED

AIRWORTHINESS CERTIFICATION)

NSN: N - Not Applicable Descriptive Data:

As directed by contracting officer (CO) IAW B040, ordering procedure, and ASC/LAS- H029, Change in Management Instructions to include ECP, CCP and nonconforming items, or other terms of the contract, these CLINs are reserved for future Total System Performance Responsibility (TSPR) for the LAS aircraft and GTDs as required. TSPR may include continued USAF Certification through the life of the program. As required, and as directed through DFARS Clause 252.227-7027 these CLINs may include certification up to and through three (3) years after period of performance of this contract.

If exercised, this CLIN will have the following delivery requirements: Delivery is complete upon contractor submitted Letter of Completion (LOC) IAW, Section J, Attachment 33, Contractor Submitted Letter of Completion, and ASC/LAS H030 Certificate of Service (COS) and Letter of Completion, for invoicing purposes.

AIRCRAFT

Noun: LAS AIRCRAFT NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: SOURCE Acceptance: SOURCE

FOB: SOURCE

Descriptive Data:

The Contractor shall manufacture and deliver USAF Military Type Certified (MTC) Light Air Support (LAS) Aircraft in accordance with (IAW) Section J, Attachment 1, "Aircraft Specification Light Air Support (LAS) Aircraft", Section J, Attachment 5, "Statement of Work (SOW) for LAS Aircraft", and Section J, Attachment 31, "Delivered Aircraft Configuration" (or as amended IAW ASC/LAS H036, "Configuration Baselines and Changes").

Offeror shall deliver all aircraft in the Delivered Aircraft Configuration to perform the standard LAS combat mission.

Noun: CONUS ICS LONG LEAD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, the contractor shall provide sufficient spares and support equipment as required to support the cumulative number of aircraft per customer for all CONUS Bases. The contractor's PWS shall list ICS Long Lead items and tasks required; contractor PWS paragraphs:

The requirement for ICS Long Lead shall be determined in accordance with the cumulative quantity range that includes, but does not exceed, the total aircraft supported.

Long Lead items are defined as those with a lead time in excess of 12 months.

Noun: CONUS ICS BASE ACTIVATION NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, the contractor shall perform base activation to establish a capability to support maintenance and supply requirements for LAS aircraft at an operating base. Base activation is to include, but is not limited to, infrastructure items, office furniture, administrative communications equipment, telecom, internet connectivity installation, storage racks, work benches, and sufficient initial spares and support equipment not purchased under Long Lead or Aircraft ICS. The contractor's PWS shall describe base activation tasks and items required in the contractor PWS paragraphs: ______________.

Noun: CONUS AIRCRAFT ICS NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, the contractor shall perform monthly CONUS Aircraft ICS. Monthly CONUS Aircraft ICS includes, but is not limited to, support equipment, repairable spares, maintenance, repair and return, supply chain management, required to (1) meet and sustain the 80% Fully Mission Capable (FMC) rate on fleet-wide basis per month based on 24 hour per day X 7 days per week aircraft availability; and (2) achieve Maintenance Cancellation Rate (MxC) less than or equal to 5%. The contractor's PWS shall describe monthly CONUS AIRCRAFT ICS tasks and items required in the contractor PWS paragraphs: ____________.

Acquisition may be accomplished via delivery orders issued in accordance with B040, Ordering Procedures.

ICS support is for each aircraft, per month per cumulative aircraft quantity range

Noun: CONUS ICS ADDL FLEET FLIGHT OPERATIONS (OPS) NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 7, PWS for CONUS Stationed Aircraft ICS, this CLIN covers a fixed price per additional fleet operational flight hour supported on a fleet wide basis above the LAS fleet operations tempo (OPTEMPO) of 60 hours per month, per aircraft billed on the CONUS AIRCRAFT ICS CLINs. The contractor shall perform all additional activities required to support each CONUS ICS additional flight operations hour to continually (1) meet and sustain the 80% Fully Mission Capable (FMC) rate on fleet-wide basis per month based on 24 hour per day X 7 days per week aircraft availability; and (2) achieve Maintenance Cancellation Rate (MxC) less then or equal to 5%. The contractor's PWS shall describe hourly support for CONUS ICS additional fleet flight operations required in the contractor PWS paragraphs: ____________.

Acquisition may be accomplished via delivery orders issued in accordance with B040, Ordering Procedures.

Based on actual fleet flight operations the contractor shall bill per flight hour for each

Noun: OCONUS ICS LONG LEAD NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

IAW Section J, Attachment 8, PWS for OCONUS Stationed Aircraft ICS, the contractor shall provide sufficient spares and support equipment as required to support the cumulative number of aircraft per customer for all OCONUS Bases. The contractor's PWS shall list ICS Long Lead items and tasks required; contractor PWS paragraphs:

The requirement for ICS Long Lead shall be determined in accordance with the cumulative quantity range that includes, but does not exceed, the total aircraft supported.

Long Lead items are defined as those with a lead time in excess of 12 months.

Acquisition for Afghanistan requirement will be at prices established in Section J, Noun: OCONUS ICS BASE ACTIVATION NSN: N - Not Applicable Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB:…