Attachment_14_-_PWS_Attachment_4_-_Required_Wing_Tooling.xlsx
XLSX spreadsheet 96 KB Posted
- Attached to
- PACAF F16 Depot Federal contract opportunity
- Solicitation number
- FA823220R0001
About this file
This document provides an advance notice of a forthcoming solicitation for F-16 depot support services. The U.S. Air Force Materiel Command Lifecycle Management Center plans to issue a competitive solicitation for contractor-operated depot maintenance and repair services for F-16 aircraft allocated to the U.S. Air Forces in the Pacific. The scope of work includes core depot-level maintenance, predefined programmatic work such as major modifications and repairs, and unplanned drop-in maintenance. The contract will have a five-year period of performance from April 2020 to March 2025, with an option to extend to March 2030. The contract ceiling amount is $252 million. Questions regarding this advance notice should be directed to the specified points of contact.
View the file
Other files for this federal contract opportunity
Show all 50
PACAF F16 Depot has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tool List Drawing # SERD # Tool Part # Task Figure No. Nomenclature Use and Application Used with SERD Level Pre-Block Only? Post-Block Only? Last Known Supplier/Cage NSN Drawing/Data Available?
MAY, VERNON S CTR USAF AFMC AFLCMC/WWM, Sustainment: MAY, VERNON S CTR USAF AFMC AFLCMC/WWM, Sustainment:
| Assumes data available form LM Aero | Make or Procure for Post Block Wing Overhaul? | ||||||||||||||
| 16A01015 | 01015 | 16A01015-1 | Fuselage Fuel System | Adapter Assembly, Pressure Test | Used to supply air pressure to the fuel system during test and fault isolation | 01006, 46014, 46141, 46142, 46177, 46205 | 5 | BAE Systems Information | 4920-01-066-3144 | Yes | Not Required | ||||
| 16A01051 | 01051 | 56SCD1078 | Fuselage Repair | None | Support, Assembly, Repair Fixture | Rotatable repair fixture; upper wing root fairings and gear doors | 11231, 11232, 11233, 11256 | 3 | N/A | 4920-00-945-8522 | SERD only | Not Required | |||
| 16A01055 | 01055 | BAC8205E | Composite Repair | None | Autoclave | Used for heat and vacuum during bonded repairs | 01056, 11163, 11678 | 5 | Baron-Blakeslee | 4430-00-870-3362 | No | Procure, Equivalent OK | |||
| 16A01056 | 01056 | 12A12012-1 | Composite Repair | None | Autoclave Dolly Assembly | Used to transport parts to and from autoclave | 01055, 11678 | 5 | OEM | 4940-00-870-3424 | No | Procure, Equivalent OK | |||
| 16A01072 | 01072 | AA314 | Unassigned | None | Bushing/Bearing Remove/Enerpac Assembly | Used to remove bushings and bearings | None | 3 | Enerpac | 5120-00-935-0772 | No | Procure, Equivalent OK | |||
| 16A01094 | 01094 | 8935-011 | Installation | None | Portable Floor Crane | Used with wing sling | 11011 | 5 | 00994 | 3950-01-093-3721 | No | Procure, Equivalent OK | |||
| 16A01132 | 01132 | PD04WRLEEE19 | Installation | None | Utility Crane, Towable | Used with wing sling | 11011 | 5 | 98752 | 3950-01-473-6011 | No | Procure, Equivalent OK | |||
| 16A11003 | 11003 | 50J25178 | Installation | None | Jack, Hydraulic, Tripod | Used with wing sling | 11011 | 5 | Y | 98752 | 1730-00-516-2019 | No | Procure, Equivalent OK | ||
| 16A11008 | 11008 | DT1163 or DT1893AY | Flare Nut | Installation Tool, Flare Nut | Used to install rivetless nutplates | 11223, 11224 | 3 | KLX, Huck, Deutsch | 5180-01-040-5082 | No | Procure | ||||
| 16A11011 | 11011 | 16A11011-1/-3 | Installation | None | Sling Assembly, Wing Hoisting | Used to hoist wing box assembly | 11916, 11775, 11774, 11164, 11125, 11003, 01094, 01132, 11776 | 3 | Y | OEM/94117 | 1730-01-318-3815 | Yes | Make | ||
| 16A11015 | 11015 | WDT10101-1 or 11425-1 | Elliptical Nuts | None | Countersink Stop Rocker Assembly | Used to measure depth of countersink | 11016, 11020 | 3 | Greer Industries/59563 | 5133-01-104-5365 | No | Procure | |||
| 16A11016 | 11016 | WDT10102-1 or 11427-1 | Elliptical Nuts | None | Elliptical Cut Countersink Cutter | Used to elliptical countersink for blind nuts | 11015 | 3 | Greer Industries/59563 | 5133-01-115-4674 | No | Procure | |||
| 16A11017 | 11017 | WDT10102-2 or 11427-2 | Elliptical Nuts | None | Elliptical Cut Countersink Cutter | Used to elliptical countersink for blind nuts | 11019 | 3 | Greer Industries/59563 | 5133-01-116-7835 | No | Procure | |||
| 16A11018 | 11018 | WDT10102-3 or 11427-3 | Elliptical Nuts | None | Elliptical Cut Countersink Cutter | Used to elliptical countersink for blind nuts | 11019 | 3 | Greer Industries/59563 | 5133-01-115-4675 | No | Procure | |||
| 16A11019 | 11019 | WDT10101-2 or 11425-2 | Elliptical Nuts | None | Countersink Stop Rocker Assembly | Used to measure depth of countersink | 11017, 11018, 11023 | 3 | Greer Industries/59563 | 5133-01-115-4716 | No | Procure | |||
| 16A11020 | 11020 | WDT10102-4 | Elliptical Nuts | None | Elliptical Cut Countersink Cutter | Used to elliptical countersink for blind nuts | 11015 | 3 | Greer Industries/59563 | 5133-01-105-9640 | No | Procure | |||
| 16A11021 | 11021 | 68DO50071-1001 | Composite Repair | None | Composite Repair Tool Kit | Used to repair composite material | None | 5 | 76301 | 5180-00-557-2731 | No | Procure | |||
| 16A11022 | 11022 | WDT10102-5 or 11427-5 | Elliptical Nuts | None | Elliptical Cut Countersink Cutter | Used to elliptical countersink for blind nuts | 11089 | 3 | Greer Industries/59563 | 5133-01-115-7996 | No | Procure | |||
| 16A11023 | 11023 | WDT10102-6 or 11427-6 | Elliptical Nuts | None | Elliptical Cut Countersink Cutter | Used to elliptical countersink for blind nuts | 11019 | 3 | Greer Industries/59563 | 5133-01-115-4676 | No | Procure | |||
| 16A11024 | 11024 | C6106-1 | Elliptical Nuts | None | 0.540 - 0.435 Piloted Reamer | Used to ream holes to final size | None | 4 | C Spec Available/9V094 | 5110-01-062-1395 | Yes | Make or procure | |||
| 16A11025 | 11025 | SLC6150 | Elliptical Nuts | None | 6150-500-A1 Piloted Reamer | Used to ream holes to final size | None | 4 | Raytheon Company/Hughes Missile System | 3455-00-938-7206 | No | Procure, Equivalent OK | |||
| 16A11026 | 11026 | A53-7 | Elliptical Nuts | None | Anvil - Upsetting, Elliptical Head Blind Nut | Used to upset head on blind nut | 11028, 11030, 11071 | 4 | HI-Shear Corp | 5130-01-078-9035 | No | Procure | |||
| 16A11027 | 11027 | A53-8 | Elliptical Nuts | None | Anvil - Upsetting, Elliptical Head Blind Nut | Used to upset head on blind nut | 11029, 11031, 11071 | 4 | HI-Shear Corp | 5130-01-078-9034 | No | Procure | |||
| 16A11028 | 11028 | C3 | Elliptical Nuts | None | Chuck - Upsetting, Elliptical Head Blind Nut | Used to assist anvil in upsetting blind nut head | 11026, 11030, 11071 | 4 | HI-Shear Corp | 5130-00-134-7592 | No | Procure | |||
| 16A11029 | 11029 | C5-820 | Elliptical Nuts | None | Chuck - Upsetting, Elliptical Head Blind Nut | Used to assist anvil in upsetting blind nut head | 11002, 11027, 11031 | 4 | HI-Shear Corp | 5130-00-839-0919 | No | Procure | |||
| 16A11030 | 11030 | M1-720 | Elliptical Nuts | None | Elliptical Head Blind Nut Upsetting Mandrel | Used to assist in blind nut installation | 11002, 11026, 11028 | 4 | HI Shear Corp/LISI Aerospace | 3460-01-088-3786 | No | Make or procure | |||
| 16A11031 | 11031 | M1-820 | Elliptical Nuts | None | Elliptical Head Blind Nut Upsetting Mandrel | Used to assist in blind nut installation | 11002, 11027, 11029 | 4 | HI Shear Corp/LISI Aerospace | 5130-00-134-7581 | No | Make or procure | |||
| 16A11033 | 11033 | 16A11033-1 | Composite Repair | None | Parts Kit, Reference-Skins, Composite Laminate | Used as a standard for composite inspections | 11037, 11038, 11039, 11040, 11041, 11087, 11091, 11094, 11095 | 5 | 94117 | 6635-01-054-8590 | Yes | Make or procure | |||
| 16A11034 | 11034 | 12A0173-1 or HCC-16024 | Composite Repair | None | Honeycomb Core Slicer Cutter Kit | Used to cut honeycomb core | 11048 | 5 | 85996 | 5110-01-074-9051 | No | Procure, Equivalent OK | |||
| 16A11035 | 11035 | 12A0174-1 | Composite Repair | None | Honeycomb Repair Arbor Saw Cutter | Used to trim honeycomb core after repair | 11044, 1150, 1152, 11056 | 5 | OEM | 5130-00-833-4383 | No | Procure, Equivalent OK | |||
| 16A11036 | 11036 | SE8969-1 | Composite Repair | None | Lap Shear Specimen Tester | Used to check tensile test | None | 5 | OEM | 4920-00-789-2913 | No | Procure, Equivalent OK | |||
| 16A11037 | 11037 | IMERSCOPE II or A-A-58073 | NDI | None | Ultrasonic Flaw Detector | Used to inspect bonded assembly for damage | 11033, 11039, 11040, 11041, 11087, 11091, 11094, 11095 | 5 | 81348 | 6635-01-363-6674 | No | Procure, Equivalent OK | |||
| 16A11038 | 11038 | 57A2271 | NDI | None | 10 Feet Connecting Cable | Used to connect probes to tester | 11033, 11037, 11039, 11040, 11041, 11087, 11091, 11094, 11095 | 5 | 1KY21 | 5995-00-371-1643 | No | Procure, Equivalent OK | |||
| 16A11039 | 11039 | 16A11039-1 | NDI | None | Aluminum Skins Reference Parts Kit | Used to assist in NDI 11037, 11038, | 11033, 11037, 11038, 11040, 11041, 11087, 11091, 11094, 11095 | 5 | Y | OYEB6 | 4920-01-055-4832 | Yes | Make or procure | ||
| 16A11040 | 11040 | 57A2275 | NDI | None | 2.25 MHz 3/8 Diameter Probe | Used to inspect bonded assemblies for voids | 11033, 11037, 11038, 11039, 11041, 11087, 11091, 11094, 11095 | 5 | 29192 | 6635-00-018-5843 | No | Procure, Equivalent OK | |||
| 16A11041 | 11041 | 57A2276 | NDI | None | 2.25 MHz 112 Diameter Probe | Used to inspect bonded assemblies for voids | 11033, 11037, 11038, 11039, 11040, 11087, 11091, 11094, 11095 | 5 | 29192 | 6635-00-945-1217 | No | Procure, Equivalent OK | |||
| 16A11042 | 11042 | 1-997 or 1550-SD | Composite Repair | None | Analytical Balance | Used to weigh adhesives for repairs | None | 5 | Fisher Scientific Comp/85973 | 6670-00-490-1569 | No | Procure, Equivalent OK | |||
| 16A11043 | 11043 | SE8787 | Composite Repair | None | Structural Repair Preparation Tool Kit | Used to prepare damaged honeycomb area for repair | None | 5 | OEM/80049/Airbase Group | 5180-00-710-0778 | SERD only | Procure | |||
| 16A11044 | 11044 | 12A0175-1 | Composite Repair | None | Honeycomb Arbor Saw Motor Assembly | Used to assist cutter in trimming honeycomb core | 11035 | 5 | OEM | 5130-00-833-4384 | No | Procure, Equivalent OK | |||
| 16A11045 | 11045 | SE8788 | Composite Repair | None | Tool Kit, Pressure-Structural Repair | Used for composite repairs | 11057 | 5 | 80049 | 4920-00-949-3976 | SERD only | Procure | |||
| 16A11046 | 11046 | 70323-1 | Composite Repair | None | Control Unit, Temperature | Used for composite repairs | 11057 | 5 | 99195 | 6685-01-048-6411 | No | Procure, Equivalent OK | |||
| 16A11047 | 11047 | SRE219-6-25-115 | Composite Repair | None | Blanket, Heating-Structural Repair | Used for composite repairs | 11057 | 5 | 90411 | 4920-00-876-5355 | No | Procure, Equivalent OK | |||
| 16A11048 | 11048 | 3S81041-101 | Composite Repair | None | Honeycomb Repair Core Slicer | Used to cut and trim honeycomb core for repair | 11034, 11049, 11051 | 5 | 98897 | 5130-00-837-6965 | No | Procure, Equivalent OK | |||
| 16A11049 | 11049 | 3S81071-101 | Composite Repair | None | Core Honeycomb Repair Holding Fixture Assembly | Used to hold honeycomb core for cutting and trimming | 11034, 11048, 11051 | 5 | 98897 | 5130-00-824-2642 | No | Procure, Equivalent OK | |||
| 16A11050 | 11050 | 10-1224 or 10L1201B-36 | Composite Repair | None | 90-Degree Pneumatic Motor | Used to trim core material to proper height | 11035, 11052 | 5 | Y | Cooper Power Tools/24047/Dotco | 5130-00-340-0719 | No | Procure | ||
| 16A11051 | 11051 | 3S81075-101 | Composite Repair | None | Core Slicer Spacer Assembly | Used to cut and trim honeycomb core for repair | 11034, 11048, 11049 | 5 | 98897 | 5130-00-837-6967 | No | Procure, Equivalent OK | |||
| 16A11052 | 11052 | 14-1723 | Composite Repair | None | Micro Adjust Trimmer Attachment | Used to trim honeycomb core to proper height | 11035, 11050 | 5 | Y | Cooper Power Tools/24047 | 5130-00-827-0897 | No | Procure, Equivalent OK | ||
| 16A11053 | 11053 | 10-1000 or 12L1000-36 | Composite Repair | None | 30,000 RPM Pneumatic Motor | Used to supply power for router attachments | 11054, 11056 | 5 | Cooper Power Tools/24047/Dotco | 5130-01-335-4754 | No | Procure | |||
| 16A11054 | 11054 | 14-2187 | Composite Repair | None | Router Attachment | Used to assist pneumatic mo- tor in removing damage | 11053, 11056 | 5 | Dotco/Cooper Air Tools | 5120-00-110-6438 | No | Procure | |||
| 16A11055 | 11055 | PD4104 or 221162 | Sealant Injection | None | Gernco Injection Gun | Used to inject sealing compound | 46017, 46019, 46021, 46022, 46081 | 5 | PRC-Desoto/92108 | 5130-00-677-7439 | No | Procure | |||
| 16A11056 | 11056 | 14-2703 | Composite Repair | None | Router Guide | Used to guide pneumatic mo- tor in trimming honey comb core | 11053, 11054 | 5 | Dotco or APEX Tool | 5130-00-110-6437 | No | Procure | |||
| 16A11057 | 11057 | 65J34440 | Composite Repair | None | Holder Assembly Air Ejector (Vacuum Pump) | Used to hold repair parts in place while adhesives cure | 11045, 11046, 11047 | 5 | USAF/80049 | 4920-00-949-3976 | No | Procure, Equivalent OK | |||
| 16A11066 | 11066 | C6105-1 | Elliptical Nuts | None | 0.242 - 0.185 Piloted Reamer | Used to ream Davis Nut holes to final size | None | 4 | C Spec Not Available | 3455-00-819-2252 | No | Procure or make to fit | |||
| 16A11067 | 11067 | SLC3280 | Elliptical Nuts | None | 3280-250-A1 Piloted Reamer | Used to ream holes to final size | None | 4 | Raytheon Company/Hughes Missile System/15090 | 3455-00-938-7199 | No | Procure | |||
| 16A11068 | 11068 | SLC3970 | Elliptical Nuts | None | 3970-312-A1 Piloted Reamer | Used to ream holes to final size | None | 4 | Raytheon Company/Hughes Missile System/15090 | 3455-00-938-7201 | No | Procure | |||
| 16A11069 | 11069 | SLC4720 | Elliptical Nuts | None | 4720-375-A1 Piloted Reamer | Used to ream holes to final size | None | 4 | Raytheon Company/Hughes Missile System/15090 | 3455-00-938-7203 | No | Procure | |||
| 16A11070 | 11070 | BP7000 | Elliptical Nuts | None | Air/Hydraulic Power Gun Assembly (Davis Nut tool) | Used to supply air/hydraulic power for blind nut gun | 11071, 11072, 11073, 11074, 11075, 11076, 11078, 11079, 11080, 11081, 11082, 11083, 11084 | 5 | HI-Shear Corp | 5130-00-944-5621 | No | Procure | |||
| 16A11071 | 11071 | BG2500 | Elliptical Nuts | None | Blind Nut Gun Assembly | Used to install blind nuts | 11072, 11073, 11074, 11075, 11076, 11078, 11079, 11080, 11081, 11082, 11083, 11084 | 5 | HI-Shear Corp | 5130-00-760-9677 | No | Procure | |||
| 16A11072 | 11072 | A53-3 | Elliptical Nuts | None | Anvil - Upsetting, Elliptical Head Blind Nut | Used to upset head on blind nut | 11071, 11075, 11079 | 4 | HI-Shear Corp | 5130-01-394-7644 | No | Procure | |||
| 16A11073 | 11073 | A53-4 | Elliptical Nuts | None | Anvil - Upsetting, Elliptical Head Blind Nut | Used to upset head on blind nut | 11071, 11080, 11076 | 4 | HI-Shear Corp | 5130-01-104-8670 | No | Procure | |||
| 16A11074 | 11074 | A53-5 | Elliptical Nuts | None | Anvil - Upsetting, Elliptical Head Blind Nut | Used to upset head on blind nut | 11071, 11080, 11076 | 4 | HI-Shear Corp | 5130-01-105-3953 | No | Procure | |||
| 16A11075 | 11075 | C2-1032 | Elliptical Nuts | None | Chuck - Upsetting, Elliptical Head Blind Nut | Used to assist anvil in upsetting blind nut head | 11071, 11072, 11079 | 4 | HI-Shear Corp | 5130-00-604-5267 | No | Procure | |||
| 16A11076 | 11076 | C2-12 | Elliptical Nuts | None | Chuck - Upsetting, Elliptical Head Blind Nut | Used to assist anvil in upsetting blind nut head | 11071, 11073, 11080 | 4 | HI-Shear Corp | 5130-00-944-5624 | No | Procure | |||
| 16A11078 | 11078 | C2-14 | Elliptical Nuts | None | Chuck - Upsetting, Elliptical Head Blind Nut | Used to assist anvil in upsetting blind nut head | 11071, 11074, 11081 | 4 | HI-Shear Corp | 5130-00-571-0997 | No | Procure | |||
| 16A11079 | 11079 | M1-1032 | Elliptical Nuts | None | Elliptical Head Blind Nut Upsetting Mandrel | Used to assist in blind nut installation | 11071, 11072, 11075 | 4 | HI Shear Corp/LISI Aerospace | 5130-00-134-7570 | No | Make or procure | |||
| 16A11080 | 11080 | M1-12 | Elliptical Nuts | None | Elliptical Head Blind Nut Upsetting Mandrel | Used to assist in blind nut installation | 11071, 11073, 11076 | 4 | HI Shear Corp/LISI Aerospace | 5130-00-944-5622 | No | Make or procure | |||
| 16A11081 | 11081 | M1-14 | Elliptical Nuts | None | Elliptical Head Blind Nut Upsetting Mandrel | Used to assist in blind nut installation | 11071, 11074, 11078 | 4 | HI Shear Corp/LISI Aerospace | 5130-00-571-0995 | No | Make or procure | |||
| 16A11082 | 11082 | M1-16 | Elliptical Nuts | None | Elliptical Head Blind Nut Upsetting Mandrel | Used to assist in blind nut installation | 11071, 11083, 11084 | 4 | HI Shear Corp/LISI Aerospace | 5130-00-134-7571 | No | Make or procure | |||
| 16A11083 | 11083 | A53-6 | Elliptical Nuts | None | Anvil - Upsetting, Elliptical Head Blind Nut | Used to upset head on blind nut | 11071, 11082, 11084 | 4 | HI-Shear Corp | 5130-01-105-0365 | No | Procure | |||
| 16A11084 | 11084 | C2-16 | Elliptical Nuts | None | Chuck - Upsetting, Elliptical Head Blind Nut | Used to assist anvil in upsetting blind nut head | 11071, 11082, 11083 | 4 | HI-Shear Corp | 5130-00-134-7601 | No | Procure | |||
| 16A11087 | 11087 | 81-113-129-660 | NDI | None | Transducer, 1/4" Diameter, 25 MHz | Used to inspect structures | 11033, 11037, 11038, 11039, 11040, 11041, 11091, 11094 | 5 | 52039 | 6635-01-053-7819 | No | Procure | |||
| 16A11089 | 11089 | WDT10101-3 or 11425-3 | Elliptical Nuts | None | Countersink Stop Rocker Assembly | Used to measure depth of countersink | 11022 | 3 | Greer Industries/59563 | 5133-01-115-4717 | No | Procure | |||
| 16A11091 | 11091 | 2103441-81-118-440-910 | NDI | None | Plastic Delay Line | Used to find flaws on bonded assemblies | 11033, 11037, 11038, 11039, 11040, 11041, 11087, 11094, 11095 | 5 | 52039 | 5999-01-062-8798 | No | Procure | |||
| 16A11094 | 11094 | Model 210 | NDI | None | Model 210 Bond Tester; ultrasonic test set | Used to inspect bonded assemblies | 11040, 11041, 11087, 11091, 11095, 11610, 11776 | 5 | 54136 | 6635-01-004-1247 | No | Procure | |||
| 16A11095 | 11095 | Model 200 | NDI | None | Model 200 Probe | Used to inspect bonded assemblies for damage | 11033, 11037, 11038, 11039, 11040, 11041, 11087, 11091, 11094 | 5 | 54136 | 6635-01-006-7441 | No | Procure | |||
| 16A11101 | 11101 | 16A11101 | Fuselage Repair | Fixture Assembly, Repair-Fuselage | Used to repair the fuselage after damage | 11122, 11124, 11131, 11132, 11133, 11430 | 1 | OEM | 4920-01-070-0229 | Yes | Not required | ||||
| 16A11125 | 11125 | 16A11125-1 | Installation | None | Pin Set, Alignment-Wing to Fuselage | Used to align wing to fuselage during wing installation | 11003, 11011, 11164, 11916, 11776 | 3 | OEM/94117 | 5315-01-054-4812 | Yes | Make | |||
| 16A11126 | 11126 | 16A11126-1 | Wing Attach Fitting Repair | None | Fixture Assembly, Maching Support-Wing Attach Fitting | Used to mill and drill single wing attach fittings, repair only | 11149, 11150, 11151, 11152, 11153, 11154, 11155, 11182, 11183 | ||||||||
| See also 11131, 11132, 11805, 11806 | 2 | OEM | 4920-01-069-6564 | Yes | Make | ||||||||||
| 16A11127 | 11127 | 16A11127-1 | Wing Fixed Trailing Edge Repair | None | Repair, Wing, Trailing Edge-Alignment Fixture Assembly, LH | Used to align fixed trailing edge during replacement/installation | None | ||||||||
| Not in 16PR13137 | 2 | OEM | 4920-01-069-6485 | Yes | Make with digital data | ||||||||||
| 16A11128 | 11128 | 16A11128-1 | Wing Fixed Trailing Edge Repair | None | Repair, Wing, Trailing Edge-Alignment Fixture Assembly, RH | Used to align fixed trailing edge during replacement/installation | None | ||||||||
| Not in 16PR13137 | 2 | OEM | 4920-01-069-1232 | Yes | Make with digital data | ||||||||||
| 16A11129 | 11129 | 16A11129-1 | Wing Mill/Drill | Figure 7-1 | LH Wing Box Assembly Support Fixture Assembly | Used to hold wing box during repair operations | 11131, 11133, 11411, 11413, 11606, 11607, 11809, 11811 | 1 | OEM | 4920-01-069-7810 | Yes | Make with COMG; same as MKTN45 | |||
| 16A11130 | 11130 | 16A11130-1 | Wing Mill/Drill | Figure 7-1 | RH Wing Box Assembly Support Fixture Assembly | Used to hold wing box during repair operations | 11132, 11133, 11412, 11414, 11606, 11607, 11810, 11812 | 1 | OEM | 4920-01-069-8389 | Yes | Make with COMG; same as MKTN45 | |||
| 16A11131 | 11131 | 16A11131-1 | Wing Mill/Drill | None | Fixture Assembly, Drill-Wing to Fuselage Attachment, LH | Used to drill wing attach fitting holes on pre-block wings and fuselage | 11101, 11129, 11134, 11135, 11136, 11137, 11139, 11140, 11141, 11149, 11150, 11151, 11152, 11153, 11155, 11156, 11157, 11158, 11159, 11187, 11289, 11290, 11291, 11298, 11431, 11432, X0001, X0002, X0003, X0004, X0005, X0006, X0007, X0008 | 1 | Y | OEM | 4920-01-069-8390 | Yes | Make with COMG; Not required for post-block work; Same as MKTC39 | ||
| 16A11132 | 11132 | 16A11132-1 | Wing Mill/Drill | None | Fixture Assembly, Drill-Wing to Fuselage Attachment, RH | Used to drill wing attach fitting holes on pre-block wings and fuselage | 11101, 11130, 11134, 11135, 11136, 11137, 11139, 11140, 11141, 11149, 11150, 11151, 11152, 11153, 11155, 11156, 11157, 11158, 11159, 11187, 11289, 11290, 11291, 11298, 11431, 11432, X0001, X0002, X0003, X0004, X0005, X0006, X0007, X0008 | 1 | Y | OEM | 4920-01-069-7811 | Yes | Make with COMG; Not required for post-block work; Same as MKTC39 | ||
| 16A11133 | 11133 | 16A11133-1 | Wing Mill/Drill | Figure 7-2 | Attach Fittings, Milling Machine | Used to drill, ream, and mill wing attach fittings | 11101, 11129, 11130, 11302 | 1 | OEM | 4920-01-071-1641 | Yes | Make with COMG; same as MKTN47 | |||
| 16A11134 | 11134 | GT915013-5938 | Wing Mill/Drill | None | 0.5938 Diameter Coolant High Speed Steel Twist Drill | Used to drill holes in wing skin and structures | 11129, 11131, 11132, 11137, 11139, 11187, X0001, X0007, X0008 | 4 | Y | Greer Fastener Corp/GI Legacy, LLC | 5133-01-070-4941 | Yes, use C15013 | Make | ||
| 16A11135 | 11135 | GT915013-7188 | Wing Mill/Drill | None | 0.7188 Diameter Coolant High Speed Steel Twist Drill | Used to drill holes in wing skin and structures | 11129, 11130, 11131, 11132, 11137, 11140, 11187, X0001, X0006, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-070-4940 | Yes, use C15013 | Make | |||
| 16A11136 | 11136 | GT915013-8438 | Wing Mill/Drill | None | 0.8438 Diameter Coolant High Speed Steel Twist Drill | Used to drill holes in wing skin and structures | 11129, 11130, 11131, 11132, 11137, 11141, 11187, X0001, X0005, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-070-4939 | Yes, use C15013 | Make | |||
| 16A11137 | 11137 | 158QGDBV1100-20-S400 | Wing Mill/Drill | Figure 7-3 | 1100 RPM Maximum 0.002 IPR Positive Feed Pneumatic Drill | Used for drilling upper and lower wing skins and substructures | 11129, 11130, 11131, 11132, 11134, 11135, 11136, 11139, 11140, 11141, 11149, 11150, 11151, 11187, 11286, 11287, 11289, 11296, 11299, 11302, X0001, X0002, X0003, X0004, X0005, X0006, X0007, X0008, X0009, X0010 | 3 | Intool Inc./Apex | 5130-01-115-4718 | No | Procure | |||
| 16A11139 | 11139 | GT915046-5938 | Fuselage Repair | None | Two Step Drill Depth Gage Set | Used to determine depth of cuts in wing skin | 11324, 11325, 11329, 11330, 11331, 11332, 11334, 11137, 11187, X0001, X0007, X0008 | 3 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 4920-01-070-2724 | No | Procure | |||
| 16A11140 | 11140 | GT915046-7188 | Wing Mill/Drill | None | 0.7188 Drill to Fluid Chuck Bushing Adapter | Used to adapt drill to fluid chuck | 11329, 11330, 11331, 11332, 11335, 11137, 11187, X0001, X0006, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 4920-01-070-2725 | Yes, use C15046 | Make or procure | |||
| 16A11141 | 11141 | GT915046-8130 | Wing Mill/Drill | None | 0.8438 Drill to Fluid Chuck Bushing Adapter | Used to adapt drill to fluid chuck | 11129, 11130, 11131, 11132, 11136, 11137, 11187, X0001, X0005, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 4920-01-070-2723 | Yes, use C15046 | Make | |||
| 16A11149 | 11149 | GT915014-6270 | Wing Mill/Drill | None | 0.6270 Diameter Right-Hand Helix Flute Chucking Reamer | Used to ream holes to final size | 11129, 11130, 11131, 11132, 11137, 11187, X0004, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-070-5222 | Yes, use C15014 | Make | |||
| 16A11150 | 11150 | GT915014-7520 | Wing Mill/Drill | None | 0.7520 Diameter Right-Hand Helix Flute Chucking Reamer | Used to ream holes to final size | 11129, 11130, 11131, 11132, 11137, 11187, X0003, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-071-3068 | Yes, use C15014 | Make | |||
| 16A11151 | 11151 | GT915014-8770 | Wing Mill/Drill | None | 0.8770 Diameter Right-Hand Helix Flute Chucking Reamer | Used to ream holes to final size | 11129, 11130, 11131, 11132, 11137, 11187, X0002, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-071-3069 | Yes, use C15014 | Make or procure | |||
| 16A11152 | 11152 | GT915075-8-1-1.375 | Wing Mill/Drill | None | 1.3750 Diameter x 0.06 Radius Spotface Reverse Cutter | Used to spotface under structure | 11129, 11130, 11131, 11132, 11156, 11159, 11187, X0007, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 3455-01-071-3007 | Yes, use C15075 | Make | |||
| 16A11153 | 11153 | GT915075-8B1-500A | Wing Mill/Drill | None | 1.500 Diameter x 0.090 Radius Reverse Spotface Cutter | Used to reverse spotface in under structure | 11129, 11130, 11131, 11132, 11157, 11159, 11187, X0006, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-071-3008 | Yes, use C15075 | Make | |||
| 16A11154 | 11154 | GT915074-10E8 | Wing Attach Fitting Repair | None | 0.589 Diameter Cutter to Chuck Spotface Pilot | Used to connect spotface cutter to chuck | 11126, 11152 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3009 | Yes, use C15074 | Make or procure | |||
| 16A11155 | 11155 | GT915075-8-1-688A | Wing Mill/Drill | None | 1.688 Diameter x 0.090 Radius Spotface Reverse Cutter | Used to reverse spotface in under structure | 11129, 11130, 11131, 11132, 11158, 11159, 11187, X0005, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3010 | Yes, use C15075 | Make | |||
| 16A11156 | 11156 | GT915074-10B8 | Wing Mill/Drill | None | 0.589 Diameter Cutter to Spindle Spotface Pilot | Used to connect pneumatic drill to spotface cutter | 11129, 11130, 11131, 11132, 11152, 11159, 11187, X0007, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3011 | Yes, use C15074 | Make or procure | |||
| 16A11157 | 11157 | GT915074-12D8 | Wing Mill/Drill | None | 0.714 Diameter Cutter to Spindle Spotface Pilot | Used to connect pneumatic drill to spotface cutter | 11129, 11130, 11131, 11132, 11153, 11159, 11187, X0006, X0008 | 4 | Y | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3012 | Yes, use C15074 | Make or procure | ||
| 16A11158 | 11158 | GT915074-14D8 | Wing Mill/Drill | None | 0.893 Diameter Cutter to Spindle Spotface Pilot | Used to connect spotface cutter to chuck | 11129, 11130, 11131, 11132, 11154, 11159, 11187, X0005, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3460-01-071-3013 | Yes, use C15074 | Make | |||
| 16A11159 | 11159 | 158QGDBVRF310-10-S400 | Wing Mill/Drill | None | 310 RPM 0.001 IPR Reverse Feed Pneumatic Drill | Used to reverse drill ream, and spotface wing substructures | 11129, 11130, 11131, 11132, 11152, 11153, 11155, 11156, 11157, 11158, 11187, X0005, X0006, X0007, X0008 | 3 | Intool Inc. | 5130-01-077-5411 | No | Procure | |||
| 16A11164 | 11164 | 16A11164-1/-5 | Installation | None | Extractor Tool Assembly, Bolt-Wing Attach Fitting | Used to remove bolts from wing attach fitting during wing box removal | 11003, 11011, 11125, 11776 | 3 | Y | OEM | 4920-01-112-3752 | Yes | Make or procure | ||
| 16A11166 | 11166 | 158QGDV10-1800-S265 | BL 71 Rib Repair | None | 1800 RPM 0.001 IPR Positive Feed Pneumatic Drill | Used for drilling upper and lower wing skins and substructures | 11457, 11460, 11241, 11246, 14070, 14071 | 3 | Intool Inc. | 5130-01-071-0595 | No | Procure | |||
| 16A11182 | 11182 | GT915074-12E8 | Wing Attach Fitting Repair | None | 0.714 Diameter Cutter to Chuck Spotface Pilot | Used to connect spotface cutter to chuck | 11126, 11153 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3460-01-071-3014 | Yes, use C15074 | Make | |||
| 16A11183 | 11183 | GT915074-14E8 | Wing Attach Fitting Repair | None | 0.839 Diameter Cutter to Chuck Spotface Pilot | Used to connect spotface cutter to chuck | 11126, 11155 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3460-01-071-3559 | Yes, use C15074 | Make | |||
| 16A11187 | 11187 | GT915506-944D | Wing Mill/Drill | None | 9.44 Long Pneumatic Drill Nose Piece | Used to interconnect bushings to drill | 11129, 11130, 11131, 11132, 11134, 11135, 11136, 11137, 11139, 11140, 11141, 11149, 11150, 11151, 11152, 11153, 11155, 11156, 11157, 11158, 11159, X0001, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3460-01-071-3015 | Yes, use C15506 | Make | |||
| 16A11188 | 11188 | 16A11188-1 | BL 71 Rib Repair | Figure 7-5 | Forward Fuel Pylon Attach Fitting Boring Tool | Used to bore pylon holes in wing skin | 11191, 11192, 111421, 11446, 14016, 14038, 11329 | 2 | OEM | 4920-01-093-9096 | Yes | Make with digital data | |||
| 16A11191 | 11191 | 16A11191-1 | Wing Repair Fixture | Figure 7-4 | LH Wing Box Assembly Holding Fixture | Used hold wing box during repair operations | 11193, 11195, 11197, 11421, 11213, 11215, 11217, 11219, 11221, 11223, 11225, 11188, 11845, 11905 | 1 | OEM | 4920-01-094-0541 | Yes | Make with COMG | |||
| 16A11192 | 11192 | 16A11192-1 | Wing Repair Fixture | Figure 7-4 | RH Wing Box Assembly Holding Fixture | Used hold wing box during repair operations | 11188, 11194, 11196, 11198, 11214, 11216, 11218, 11220, 11222, 11224, 11226, 11446, 11845, 11905 | 1 | OEM | 4920-01-094-0542 | Yes | Make with COMG | |||
| 16A11193 | 11193 | 16A11193-1/-3 | BL 71 Rib Repair | None | Fixture Assembly, Holding-Rib/Spar, BL71, LH | Used to replace spars and ribs (for pre/post ECP 0350) | 11191, 11905 | 2 | OEM | 4920-01-093-9811 | Yes | Make with COMG/digital data | |||
| 16A11194 | 11194 | 16A11194-1/-3 | BL 71 Rib Repair | None | Fixture Assembly, Holding-Rib/Spar, BL71, RH | Used to replace spars and ribs (for pre/post ECP 0350) | 11192, 11905 | 2 | OEM | 4920-01-093-9097 | Yes | Make with COMG/digital data | |||
| 16A11195 | 11195 | 16A11195-1/-3 | BL 120 Rib Repair | None | Fixture Assembly, Holding-Rib/Spar, BL120, LH | Used to replace spars and ribs (for pre/post ECP 0350) | 11191, 11905 | 2 | OEM | SERD N/A | Yes | Make with COMG/digital data | |||
| 16A11196 | 11196 | 16A11196-1/-3 | BL 120 Rib Repair | None | Fixture Assembly, Holding-Rib/Spar, BL120, RH | Used to replace spars and ribs (for pre/post ECP 0350) | 11192, 11905 | 2 | OEM | 4920-01-093-0432 | Yes | Make with COMG/digital data | |||
| 16A11197 | 11197 | 16A11197-1 | BL 157 Rib Repair | None | Fixture Assembly, Holding-Rib/Spar, BL157, LH | Used to replace spars and ribs | 11191, 11905 | 2 | OEM | 4920-01-093-0433 | Yes | Make with COMG/digital data | |||
| 16A11198 | 11198 | 16A11198-1 | BL 157 Rib Repair | None | Fixture Assembly, Holding-Rib/Spar, BL157, RH | Used to replace spars and ribs | 11192, 11905 | 2 | OEM | 4920-01-093-0878 | Yes | Make with COMG/digital data | |||
| 16A11213 | 11213 | 16A11213-1 | BL 71 Rib Repair | Figure 7-6 | LH Rear Spar Fuel Pylon Fastener Drill Fixture | Used to properly locate and drill pylon holes | 11017, 11018, 11019, 11070, 11071, 11074, 11078, 11081, 11082, 11083, 11084, 11137, 11191, 11103, 11304, 11305, 11314, 11315, 11316, 11317, 11318, 11319, 11320, 11323, 11289, X0001, X0008, X0009, X0010, X0011, X0012 | 2 | OEM | 4920-01-093-0879 | Yes | Make with COMG/digital data | |||
| 16A11214 | 11214 | 16A11214-1 | BL 71 Rib Repair | Figure 7-6 | RH Rear Spar Fuel Pylon Fastener Drill Fixture | Used to properly locate and drill pylon holes | 11017, 11018, 11019, 11070, 11071, 11074, 11078, 11081, 11082, 11083, 11084, 11137, 11192, 11103, 11304, 11305, 11306, 11307, 11308, 11309, 11310, 11311, 11312, 11313, 11314, 11315, 11316, 11317, 11318, 11319, 11320, 11323, 112899, X0001, X0008, X0009, X0010, X0011, X0012 | 2 | OEM | 4920-01-093-0880 | Yes | Make with COMG/digital data | |||
| 16A11215 | 11215 | 16A11215-1 | BL 71 Rib Repair | Figure 7-7 | LH BL 71 Weapons Pylon Fastener Drill Fixture | Used to properly locate and drill pylon holes | 11191, 11324, 11325, 11326, 11329, 11330, 11331, 11332, 11333, 11334, 11335, 11336, 11337, 11338, 11339, 11340, 14016, 14038, 11343, X0008, X0013, X0014 | 2 | OEM | 4920-01-093-2165 | Yes | Make with COMG/digital data | |||
| 16A11216 | 11216 | 16A11216-1 | BL 71 Rib Repair | Figure 7-7 | RH BL 71 Weapons Pylon Fastener Drill Fixture | Used to properly locate and drill pylon holes | 11192, 11324, 11325, 11326, 11329, 11330, 11331, 11332, 11333, 11334, 11335, 11336, 11337, 11338, 11339, 11340, 14016, 14038, 11343, X0008, X0013, X0014 | 2 | OEM | 4920-01-093-2163 | Yes | Make with COMG/digital data | |||
| 16A11217 | 11217 | 16A11217-1 | BL 120 Rib Repair | Figure 7-7 | LH BL 120 Weapons Pylon Fastener Drill Fixture | Used to properly locate and drill pylon holes | 11191, 14016, 11324, 11341, 11342, 11348, 14038, 11329, 11330, 11343, 11344, 11345, 11349, 11333, 11346, 11337, 11338, 11339, 11340, 11350, X0008, X0014, X0015 | 2 | OEM | 4920-01-093-2164 | Yes | Make with COMG/digital data | |||
| 16A11218 | 11218 | 16A11218-1 | BL 120 Rib Repair | Figure 7-7 | RH BL 120 Weapons Pylon Fastener Drill Fixture | Used to properly locate and drill pylon holes | 11192, 14016, 11324, 11341, 11342, 11348, 11329, 11330, 11343, 11344, 11345, 11349, 11333, 11346, 11347, 11336, 11337, 11338, 11339, 11340, 11350, 14038, X0008, X0014, X0015 | 2 | OEM | 4920-01-093-9552 | Yes | Make with COMG/digital data | |||
| 16A11219 | 11219 | 16A11219-1 | BL 157 Rib Repair | Figure 7-7 | LH BL 157 Launcher Adapter Fastener Drill Fixture | Used to locate and support drill during operation | 11191, 14016, 11341, 11351, 14038, 11329, 11330, 11343, 11345, 11352, 11347, 11353, 11338, 11339, X0008, X0014, X0015 | 2 | OEM | 4920-01-093-2166 | Yes | Make with COMG/digital data | |||
| 16A11220 | 11220 | 16A11220-1 | BL 157 Rib Repair | Figure 7-7 | RH BL 157 Launcher Adapter Fastener Drill Fixture | Used to locate and support drill during operation | 11192, 14016, 11341, 11351, 14038, 11329, 11330, 11343, 11345, 11352, 11347, 11353, 11338, 11339, X0008, X0014, X0015 | 2 | OEM | 4920-01-093-2167 | Yes | Make with COMG/digital data | |||
| 16A11221 | 11221 | 16A11221-1 | Flaperon Repair | None | Fixture Assembly, Holding-Fitting, Flaperon Hinge, LH | Used to replace flaperon fittings on the rear spar | 11015, 11016, 11017, 11019, 11067, 11068, 11070, 11071, 11073, 11074, 11075, 11076, 11078, 11080, 11081, 11191, 11195, 11197, 11282, 11263, 11388, 14082, 11436, 11437 | 2 | OEM | 4920-01-093-3961 | Yes | Make with COMG/digital data | |||
| 16A11222 | 11222 | 16A11222-1 | Flaperon Repair | None | Fixture Assembly, Holding-Fitting, Flaperon Hinge, RH | Used to replace flaperon fittings on the rear spar | 11015, 11016, 11017, 11019, 11067, 11068, 11070, 11071, 11073, 11074, 11075, 11076, 11078, 11080, 11081, 11192, 11196, 11198, 11228, 11282, 11263, 11388, 14082, 11436, 11437 | 2 | OEM | 4920-01-093-3959 | Yes | Make with COMG/digital data | |||
| 16A11223 | 11223 | 16A11223-1 | Wing Leading Edge | None | Fixture Assembly, Holding-Leading Edge Flap Hinge, LH | Used to replace LEF hinge fittings on the front spar | 11008, 11015, 11016, 11067, 11070, 11071, 11073, 11080, 11191, 11228, 11281, 11282, 11439, 11452, 11470, 11441, 14039 | 2 | OEM | 4920-01-093-3962 | Yes | Make with COMG/digital data | |||
| 16A11224 | 11224 | 16A11224-1 | Wing Leading Edge | None | Fixture Assembly, Holding-Leading Edge Flap Hinge, RH | Used to replace LEF hinge fittings on the front spar | 11008, 11015, 11016, 11067, 11070, 11071, 11073, 11080, 11192, 11228, 11281, 11282, 11439, 11452, 11470, 11441, 14039 | 2 | OEM | 4920-01-093-2168 | Yes | Make with COMG/digital data | |||
| 16A11225 | 11225 | 16A11225-1 | Wing Leading Edge | None | Fixture Assembly, Drill-Leading Edge Flap Hinge, Rotary ACTR, LH | Used to drill rotary actuator holes in the leading edge spar for pre-block aircraft | 11191, 11166, 11240, 11241, 11246, 11455, 11456, 11457, 11459, 11460, 14065, 14070, 14071 | 2 | Y | OEM | 4920-01-093-2169 | Yes | Make with COMG/digital data | ||
| 16A11226 | 11226 | 16A11226-1 | Wing Leading Edge | None | Fixture Assembly, Drill-Leading Edge Flap Hinge, Rotary ACTR, RH | Used to drill rotary actuator holes in the leading edge spar for pre-block aircraft | 11192, 11166, 11240, 11241, 11246, 11455, 11456, 11457, 11459, 11460, 14065, 14070, 14071 | 2 | Y | OEM | 4920-01-093-3963 | Yes | Make with COMG/digital data | ||
| 16A11227 | 11227 | GT900500CBRHS | Wing Rib and Spar Repair | None | 0.500 Diameter x 0.062 Radius Reverse Spotface Cutter | Used to reverse spotface wing skin or structures | 11228, 11429, 11438, 11443, 11458, 11495, 14048 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-071-3016 | No | Make | |||
| 16A11228 | 11228 | GT900625A187CBRHS | Wing Rib and Spar Repair | None | 0.187 Diameter Cutter to Spindle Reverse Spotface Pilot | Used to interconnect spotface | 11227, 11392, 11424, 11439, 11444, 11447 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-120-4597 | No, SERD not available | Make | |||
| 16A11231 | 11231 | 16A11231-1 | Wing Fairings | None | Fixture Assembly, Repair-Fairing, Upper Wing Root, LH | Used to repair wing root fairings | 01051 | 3 | OEM | 4920-01-085-2426 | Yes | Replace fairing, drill per existing structure | |||
| 16A11232 | 11232 | 16A11232-1 | Wing Fairings | None | Fixture Assembly, Repair-Fairing, Upper Wing Root, RH | Used to repair wing root fairings | 01051 | 3 | OEM | 4920-01-085-2427 | Yes | Replace fairing, drill per existing structure | |||
| 16A11233 | 11233 | 16A11233-1 | Wing Fairings | None | Fixture Assembly, Repair-Fairing, Lower Wing Root, LH | Used to repair wing root fairings | 01051 | 3 | OEM | 4920-01-084-6144 | Yes | Replace fairing, drill per existing structure | |||
| 16A11240 | 11240 | GT1C902923 | Wing Leading Edge/Wing Rib and Spar Repair | None | 0.3438 Diameter Carbide Tip Twist Drill | Used to drill holes in wing skin and structures | 11225, 11226, 11241, 11242, 11457, 11166 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5133-01-088-3840 | No | Replace fairing, drill per existing structure | |||
| 16A11241 | 11241 | GT915060-16-10-3438B | Wing Leading Edge/Wing Rib and Spar Repair | None | Nose Piece to 0.3438 Diameter Drill Bushing | Used to adapt nose piece to drill | 11225, 11226, 11166, 11240, 11242, 11300, 11457 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3465-01-071-3562 | Yes, use C15060 | Make | |||
| 16A11242 | 11242 | GT916493-719B | Vertical Stab Repair | Nose Piece, Vacuum-Pneumatic Drill | Used to collect graphite dust and metal chips | 11166, 11241, 11246, 11300 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3465-01-071-3563 | No | Make | ||||
| 16A11246 | 11246 | GT915060-16-10-3755B | Wing Leading Edge | None | Nose Piece to 0.3750 Diameter Reamer Bushing | Used to adapt nose piece to reamer | 11166, 11225, 11226, 11242, 11245, 11300, 11457 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3465-01-071-3565 | Yes, use C15060 | Make | |||
| 16A11248 | 11248 | GT9C902999 | Wing Skins | None | 0.3135 Diameter Carbide Chucking Reamer | Used to ream holes to final size | 11251 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3455-01-071-3619 | No | Make or procure | |||
| 16A11249 | 11249 | GT9C903000 | Wing Skins | None | 0.2610 Diameter Carbide Chucking Reamer | Used to ream holes to final size | 11252 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3455-01-071-3620 | No | Make or procure | |||
| 16A11256 | 11256 | 16A11256-1 | Wing Fairings | None | Fixture Assembly, Repair-Fairing, Lower Wing Root, RH | Used to repair wing root fairings | 01051 | ||||||||
| Not in 16PR13137 or Table 2-1 | 3 | OEM | 4920-01-085-2428 | Yes | Replace fairing, drill per existing structure | ||||||||||
| 16A11258 | 11258 | GTK100 | Pylon Insert | None | Pylon Mount Insert Removal/Installation Tool Kit | Used to install and remove pylon inserts | 11696 | 4 | Greer Fastener Corp/GI Legacy, LLC/Reid Products | 5180-01-101-8004 | Yes | Make or procure | |||
| 16A11263 | 11263 | GT900687-311-CBHS | Vertical Stab Repair | Pilot, Counterbore Cutter to Spindle, .311 Diameter | Used to guide counterbore | 14039 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 3460-01-071-3623 | SERD only | Make | ||||
| 16A11264 | 11264 | GT900687CBRHS | Vertical Stab Repair | None | 0.687 Diameter x 0.060 Radius Reverse Counterbore Cutter | Used to counterbore wing structures | 11265 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-077-1572 | No | Make | |||
| 16A11265 | 11265 | GT900687312CBRHS | Vertical Stab Repair | None | 0.312 Diameter Cutter to Spindle Counterbore Cutter | Used to guide counterbore | 11264 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3624 | No | Make | |||
| 16A11266 | 11266 | GT900500CBCT | Vertical Stab Repair | None | 0.500 Diameter x 0.06 Radius Carbide Counterbore Cutter | Used to counterbore graphite epoxy skin | 11267 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-077-1573 | No | Make | |||
| 16A11267 | 11267 | GT900500-249-CBCT | Vertical Stab Repair | Pilot, Counterbore-Cutter to Spindle, .249 Diameter | Used to counterbore graphite epoxy skin - cancelled and added as a standard hand tool (16PR1399) | 11266, 11624 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3625 | No | Not required | ||||
| 16A11281 | 11281 | GT900625-CBRHS | Wing Rib and Spar Repair | None | Cutter, Counterbore-Reverse, .625 Diameter x .06 Radius | Used to reverse spotface wing box understructure; Added to Depot Standard Hand Tool List (16PR1399); Cancelled per 11358 | 11282, 11283, 11449, 11446, 11623 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 5133-01-078-1910 | SERD only | Make or procure | |||
| 16A11282 | 11282 | GT900625-250-CBRHS | Wing Rib and Spar Repair | Pilot, Counterbore Cutter to Spindle, .250 Diameter | Used to reverse spotface wing box understructure; Added to Depot Standard Hand Tool List (16PR1399); Cancelled per 11358 | 11281, 11283, 11470 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 3460-01-071-3627 | SERD only | Make or procure | ||||
| 16A11283 | 11283 | GT916491-250-500-111 | Vertical Stab Repair | Bushing, Drill - Manual guide | Cancelled per 11358 | 11281, 11300 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 3465-01-071-3580 | SERD only | Not required | ||||
| 16A11286 | 11286 | GT915060-22-22-7188 | Vertical Stab Repair | Bushing, Drill-Nose Piece to .7188 Diameter Drill | Used to drill fuselage attach fittings on the vertical stabilizer | 11135, 11140, 11187, 11293, 11302 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 3465-01-071-4105 | Yes, use C15060 | Not required | ||||
| 16A11287 | 11287 | GT915060-24-20-7520 | Vertical Stab Repair | Bushing, Reamer-Nose Piece to .7520 Diameter Reamer | Used to ream fuselage attach fittings on the vertical stabilizer | 11150, 11187, 11290, 11295, 11302 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 3465-01-070-3581 | Yes, use C15060 | Not required | ||||
| 16A11289 | 11289 | GT915506-1044D | Wing Mill and Drill/Fuselage Mill and Drill | None | Pneumatic Drill Nose Piece | Used to interconnect drill to bushing | 11151, 11137, 11299, 11302, 11307 | 4 | Y | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3465-01-071-3582 | Yes, use C15506 | Make | ||
| 16A11290 | 11290 | GT915075-8-1.625 | Wing Mill and Drill/Fuselage Mill and Drill | None | 1.445 Diameter x 0.90 Radius Spotface Reverse Cutter | Used to spotface under structure | 11131, 11132, 11159, 11286, 11287, 11291, 11292, 11302, 11805, 11806, X0006, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-071-3583 | Yes, use C15075 | Make | |||
| 16A11291 | 11291 | GT915074-12B-8 | Wing Mill and Drill/Fuselage Mill and Drill | Pilot, Spotface - .500 Diameter | Used to spotface wing structure | 11131, 11132, 11159, 11187, 11286, 11290, 11292, 11302, X0006, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3584 | Yes, use C15074 | Make | ||||
| 16A11292 | 11292 | GT915011-944B | Vertical Stab Repair | Collar, Nose Piece-Pneumatic Drill, Positive Feed | Used to spotface vertical stabilizer structure | 11159, 11286, 11290, 11291, 11296, 11297, 11298, 11302 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3584 | Yes, use C15011 | Not required | ||||
| 16A11293 | 11293 | 158Q | Vertical Stab Repair | Drill, Pneumatic-Positive Feed, .002 IPR, 660 RPM | Used to drill fuselage attach fittings on the vertical stabilizer | 11286 | 3 | Intool Inc. | N/A | No SERD | Not required | ||||
| 16A11296 | 11296 | GT915060-24-24-8438 | Vertical Stab Repair | None | Bushing, Drill-Nose Piece to .8438 Diameter Drill | Used to drill fuselage attach fittings on the vertical stabilizer | 11136, 11141, 11187, 11293, 11302 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3460-01-071-3585 | Yes, use C15060 | Not required | |||
| 16A11297 | 11297 | GT915075-12-1.875 | Vertical Stab Repair | Cutter, Spotface-Reverse, Carbide, 1.875 Diameter | Used to spotface fuselage attach fittings on the vertical stabilizer | 11159, 11292, 11296, 11298, 11302 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 3455-01-071-3586 | Yes, use C15075 | Not required | ||||
| 16A11298 | 11298 | GT915074-14A-12 | Wing Mill/Drill | Pilot, Spotface - .750 Diameter | Used to spotface wing and fuselage structure | 11131, 11132, 11187, 11302 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3460-01-071-3587 | Yes, use C15074 | Make | ||||
| 16A11300 | 11300 | 16A11300-1 | Vertical Stab Repair Fixture | Fixture Assembly, Repair-Box, Vertical Stabilizer | Used to work on the vertical stabilizer box | No SERD available | 1 | OEM | SERD N/A | Yes | Not required | ||||
| 16A11301 | 11301 | 16A11301-1 | Vertical Stab Repair Fixture | Fixture Assembly, Repair-Actuator Support, Vertical Stabilizer | Used to work on the vertical stabilizer actuator support | 14024 | 1 | OEM | 4920-01-068-8997 | Yes | Not required | ||||
| 16A11302 | 11302 | 16A11302-1 | Vertical Stab Mill/Drill | Fixture Assembly, Mill and Drill-Vert Stab | Used for vertical stabilizer | None | 1 | OEM | 4920-01-068-8998 | Yes | Not required | ||||
| 16A11303 | 11303 | GT915013-4531 | Pylon Insert | None | 0.4531 Diameter Coolant High Speed Steel Twist Drill | Used to drill holes for pylon attaching points | 11137, 11213, 11214, 11305, 11307, 11289, X0008, X0010 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-097-3818 | Yes, use C15013 | Make | |||
| 16A11304 | 11304 | GT915013-3750 | BL 71 Rib Repair | None | 0.3750 Diameter Coolant High Speed Steel Twist Drill | Used to drill holes in wing skin and structures | 11137, 11213, 11214, 11306, 11308, 11131, X0008, X0009 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-096-0234 | Yes, use C15013 | Make | |||
| 16A11305 | 11305 | GT915046-4531 | BL 71 Rib Repair | None | 0.4531 Drill to Fluid Chuck Bushing Adapter | Used to adapt drill to fluid chuck | 11303, X0008, X0010 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5130-01-092-8323 | Yes, use C15046 | Make | |||
| 16A11306 | 11306 | GT915046-3755 | BL 71 Rib Repair | None | 0.3750 Drill to Fluid Chuck Bushing Adapter | Used to adapt drill to fluid chuck | 11304, X0008, X0010 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5130-01-092-7652 | Yes, use C15046 | Make or procure | |||
| 16A11307 | 11307 | GT915060-24-20-4531 | BL 71 Rib Repair | None | Drill - Nose Piece to 0.4531 Drill Bushing | Used to adapt nose piece to drill | 11137, 11213, 11214, 11303, 11305, 11289, X0008, X0010 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-095-1000 | Yes, use C15060 | Make or procure | |||
| 16A11308 | 11308 | GT915060-23-18-3755 | BL 71 Rib Repair | None | Drill - Nose Piece to 0.3750 Drill Bushing | Used to adapt nose piece to drill | 11137, 11213, 11214, 11304, 11306, 11315, X0008, X0009 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-095-1001 | Yes, use C15060 | Make or procure | |||
| 16A11309 | 11309 | GT915060-24-20-4725 | BL 71 Rib Repair | None | Reamer - Nose Piece to 0.4725 Reamer Bushing | Used to guide reamer | 11137, 11213, 11214, 11313, 11316, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-095-1002 | Yes, use C15060 | Make or procure | |||
| 16A11310 | 11310 | GT915060-23-18-3975 | BL 71 Rib Repair | None | Reamer - Nose Piece to 0.3975 Reamer Bushing | Used to adapt nose piece to reamer | 11137, 11213, 11214, 11314, 11316, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-095-1003 | Yes, use C15060 | Make or procure | |||
| 16A11311 | 11311 | GT917096-102 | BL 71 Rib Repair | None | 0.4720 Hole Bushing Guided Depth Control Cage Assembly | Used to align and control depth of cut | 11213, 11214, 11318, 11323 | 3 | Greer Fastener Corp/United Drill Bushing | 4920-01-094-3806 | SERD only | Make or procure; equivalent ok; likely use microstop | |||
| 16A11312 | 11312 | GT917096-101 | BL 71 Rib Repair | None | 0.3970 Hole Bushing Guided Depth Control Cage Assembly | Used to align and control depth of cut | 11213, 11214, 11317, 11323 | 3 | Greer Fastener Corp/United Drill Bushing | 4920-01-094-4539 | SERD only | Make or procure; equivalent ok; likely use microstop | |||
| 16A11313 | 11313 | GT915014-4720 | BL 71 Rib Repair | None | 0.4720 Diameter Right-Hand Helical Flutes Chucking Reamer | Used to ream holes to final size | 11137, 11213, 11214, 11309, 11316, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-095-5181 | Yes, use C15014 | Make | |||
| 16A11314 | 11314 | GT915014-3970 | BL 71 Rib Repair | None | 0.3970 Diameter Right-Hand Helical Flutes Chucking Reamer | Used to ream holes to final size | 11137, 11191, 11192, 11213, 11214, 11310, 11316, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC | 3455-01-099-1410 | Yes, use C15014 | Make | |||
| 16A11315 | 11315 | GT915506-894D | BL 71 Rib Repair | None | 8.84 Long Pneumatic Drill Nose Piece | Used to interconnect bushings to pneumatic drill | 11137, 11304, 11308 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-095-1004 | Yes, use C15506 | Make or procure | |||
| 16A11316 | 11316 | GT915506-844D | BL 71 Rib Repair | None | 8.44 Long Pneumatic Drill Nose Piece | Used to interconnect bushings to pneumatic drill | 11101, 11159, 11322, 11433, 11434, 11435, 11437, 11213, 11214, 11137, 11309, 11310, 11313, 11314, X0002, X0003, X0008 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-095-1005 | Yes, use C15506 | Make or procure | |||
| 16A11317 | 11317 | GT21C903184 | BL 71 Rib Repair | None | 0.966 Diameter x 0.090 Radius 0.395 Pilot Counterbore Cutter | Used to counterbore wing skin or structures | 11213, 11214, 11311, 11323 | 4 | Greer Fastener Corp/GI Legacy, LLC/UDB | 5133-01-094-8855 | Yes, similar to 21C3056, no SERD | Make or procure | |||
| 16A11318 | 11318 | GT21C903185 | BL 71 Rib Repair | None | 0.966 Diameter x 0.090 Radius 0.470 Pilot Counterbore Cutter | Used to counterbore wing skin or structures | 11213, 11214, 11311, 11323 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-095-5119 | Yes, similar to 21C3057, no SERD | Make | |||
| 16A11319 | 11319 | GT900750-470CBRHS | BL 71 Rib Repair | None | 0.750 Diameter x 0.06 Radius 0.470 Pilot Reverse Counterbore Cutter | Used to counterbore in wing skin | 11323 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-095-1716 | No, no SERD | Make or procure | |||
| 16A11320 | 11320 | GT900687395CBRHS | BL 71 Rib Repair | None | 0.687 Diameter x 0.060 Radius 0.395 Pilot Reverse Counterbore Cutter | Used to reverse counterbore wing skin and structures | 11323 | 4 | Greer Fastener Corp/GI Legacy, LLC | 5133-01-077-1572 | No | Make | |||
| 16A11322 | 11322 | 16A11322-1 | Vertical Stab Repair | Fixture Assembly, Drill-Longeron, Vertical Fin Attach Point | Used as a drill fixture for the vertical stabilizer attach points on fuselage | 11159, 11433, 11434, 11435, 11475, X0002, X0003, X0008 | 2 | OEM | N/A | N/A | Not required | ||||
| 16A11323 | 11323 | Unknown (no SERD) | BL 71 Rib Repair | Drill, Pneumatic-Portable, 400 Max RPM, 1/2" Chuck | Used to counterbore wing skin or structures | 11317, 11318, 11319, 11320 | 3 | Unknown | N/A | No | Procure equivalent | ||||
| 16A11324 | 11324 | GT916W020MLCU-167439 | BL 71 Rib Repair/BL 120 Rib Repair/Pylon Insert | None | 1.4000 Multidiameter and Taper Step Drill | Used to drill and countersink pylon holes | 11215, 11216, 11329, 11343, 11338, 11333, 14016, 14038, 11217, 11218 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5133-01-094-9404 | Yes, use 16W030, MLCU, 167437 | Make or procure | |||
| 16A11325 | 11325 | GT916W020MLCU-167442 | BL 71 Rib Repair | None | 1.8750 Multidiameter and Taper Step Drill | Used to drill and countersink pylon holes | 11215, 11216, 11329, 11331, 11338, 11332, 14016, 14038 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5133-01-094-9405 | Yes, use 16W030, MLCU, 167437 | Make or procure | |||
| 16A11326 | 11326 | No SERD Available | BL 71 Rib Repair | None | 2.0 Multidiameter and Taper Step Drill | No SERD available | None | 4 | Unknown | SERD N/A | No | Make tool as necessary to complete task; SERD not available | |||
| 16A11329 | 11329 | GT915202-8 | BL 71 Rib Repair | None | Pneumatic Drill Positive Feed Adjustable Stop | Used to stop spindle rotation at desired location | 14016, 14030, 11415 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-092-7653 | No | Procure if possible, re-engineer if necessary; SERD not available | |||
| 16A11330 | 11330 | CP3090TALDAL | BL 71 Rib Repair/BL 120 Rib Repair/Pylon Insert | None | Pneumatic - Torque Control, Right Angle, 275 RPM Drive | Used to provide proper torque to threaded taps | 11339, 11340 | 3 | Y | Chicago Pneumatic | 5130-01-095-1717 | No, no SERD | Procure | ||
| 16A11331 | 11331 | GT914146-644E | BL 71 Rib Repair | None | 2-1/2-16 Left-Hand Thread 6.44 Long Pneumatic Drill Nose Piece | Used to interconnect bushings to drill | 11332, 11334, 14016 | 4 | Y | Greer Fastener Corp/GI Legacy, LLC | 5130-01-095-2350 | Yes, use C14146 | Make or procure | ||
| 16A11332 | 11332 | GT917055-32-38-1-8756 | BL 71 Rib Repair | None | 1.8756 Diameter Nose Piece to Drill Fixture Bushing Adapter | Used to guide and interconnect nose piece to drill fixture | 11215, 11216, 11325, 11331 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-092-8930 | Yes, use C17055 | Make | |||
| 16A11333 | 11333 | GT917055-39-32-1-4006 | BL 71 Rib Repair/BL 120 Rib Repair/Pylon Insert | None | 1.4006 Diameter Nose Piece to Drill Fixture | Used to guide and interconnect nose piece to drill fixture | 11215, 11216, 11217, 11218, 11324, 11343 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-092-8931 | Yes, use C17055 | Make or procure | |||
| 16A11334 | 11334 | GT917055-40-40-2-0606 | BL 71 Rib Repair | None | Piece to Drill Fixture Bushing Adapter 2.0606 Diameter Nose | Used to guide and interconnect nose piece to drill fixture | 11215, 11216, 11326, 11331 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 4920-01-095-1706 | Yes, use C17055 | Make or procure | |||
| 16A11335 | 11335 | GT917054-30-38-1-1425 | BL 71 Rib Repair | None | 2.3748 Diameter Tap to Drill Fixture Adapter Bushing | Used to guide tap when cutting threads | 11215, 11216, 11340 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-094-0994 | Yes, use C17054 | Make | |||
| 16A11336 | 11336 | GT917054-32-32-1-1425 | BL 71 Rib Repair/BL 120 Rib Repair/Pylon Insert | None | 1.9998 Diameter Tap to Drill Fixture Adapter Bushing | Used to guide tap when cutting threads | 11215, 11216, 11217, 11218, 11340 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-092-8324 | Yes, use C17054 | Make | |||
| 16A11337 | 11337 | GT917054-37-40-1-0170 | BL 71 Rib Repair | None | 2.2499 Diameter Tap to Drill Fixture Adapter Bushing | Used to guide tap when cutting threads | 11215, 11216, 11339 | 4 | Greer Fastener Corp/GI Legacy, LLC/United Drill Bushing | 5130-01-092-8325 | Yes, use C17054 | Make |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .