Attachment_06_-_Appendix_A.pdf

Appendix A Use Most Recent Version for All of the Following:

BUILDING CODES:

International Building Code International Mechanical Code International Plumbing Code International Energy Conservation Code International Fuel Gas Code Fire Safety Code, NFPA 1 Life Safety Code, National Fire Protection Association, NFPA 101 National Electric Code, NFPA 70 National Electric Safety Code, ANSI C2 Council of American Building Officials (CABO) One and Two Family Dwelling Code

DESIGN STANDARDS:

Base Facility Design Standard Base Architectural Compatibility Standard Tab K, Telecommunications Installation Criteria for Facility Design and Renovation Air Installation Compatible Use Zone (AICUZ), Hill AFB ASCE/SEI 7-05 Minimum Design Loads for Buildings and Other Structures ASHRAE Standard 62.1, Ventilation for Acceptable Indoor Air Quality ASHRAE Standard 90.1, Energy Standard for Buildings Illuminating Engineering Society of North America, Reference and Application Lighting Handbook ICSSC RP6 - Standards of Seismic Safety for Existing Federally Owned and Leased Buildings Architectural Barriers Act (ABA) Accessibility Standard for Department of Defense Facilities

REGULATIONS:

10 CFR 435 Energy Conservation Voluntary Performance Standards for New Buildings Energy Policy Act

AIR FORCE INSTRUCTION (AFI):

AFI 32-10141, “Planning and Programming Fire Safety Deficiency Correction Projects”

AIR FORCE DESIGN GUIDES (AFDG) and STANDARDS:

Temporary Lodging Facilities Design Guide USAF Dining Facilities Design Guide US Air Force Interior Design Standards

MILITARY HANDBOOK:

MIL-HDBK 1004/6 Lightning Protection MIL HDBK 1013-1A, Design Guidelines for Physical Security of Facilities MIL HDBK 1013-10, Design Guidelines for Security Fencing, Gates, Barriers, and Guard Facilities

AIR FORCE HANDBOOK:

Air Force Handbook 32-1084, Facility Requirements

OTHER:

DD Form 1354, “Transfer and Acceptance of DoD Real Property” DD Form 1354 MASTER CHECKLIST EXCEL SPREAD SHEET Unified Facilities Guide Specification (UFGS) 01 45 00.00 10

UNIFIED FACILITIES CRITERIA (UFC) (See www.wbdg.org for most recent version)

SERIES 1: POLICY, PROCEDURES AND GUIDANCE

SERIES 1-200: POLICY

UFC 1-200-01 General Building Requirements UFC 1-200-02 High Performance and Sustainable Building Requirements UFC 1-201-01 Non-Permanent DoD Facilities in Support of Military Operations UFC 1-201-02 Assessment of Existing Facilities for Use in Military Operations UFC 1-202-01 Host Nation Facilities in Support of Military Operations

SERIES 1-300: PROCEDURES AND GUIDANCE

UFC 1-300-01 Criteria Format Standard UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard UFC 1-300-07A Design Build Technical Requirements UFC 1-300-08 Criteria for Transfer and Acceptance of DoD Real Property FC 1-300-09N Navy and Marine Corps Design Procedures

SERIES 1-900: MISCELLANEOUS

UFC 1-900-01 Selection of Methods for the Reduction, Reuse and Recycling of Demolition Waste

SERIES 2: MASTER PLANNING

UFC 2-000-05N (formerly P-80) Facility Planning Criteria for Navy/Marine Corps Shore Installations UFC 2-100-01 Installation Master Planning

SERIES 3: DISCIPLINE-SPECIFIC CRITERIA

SERIES 3-100: ARCHITECTURE AND INTERIOR DESIGN

UFC 3-101-01 Architecture UFC 3-110-03 Roofing, with Change UFC 3-110-04 Roofing Maintenance and Repair UFC 3-120-01 Design: Sign Standards UFC 3-120-10 Interior Design UFC 3-190-06 Protective Coatings and Paints

SERIES 3-200: CIVIL / GEOTECHNICAL / LANDSCAPE ARCHITECTURE

UFC 3-201-01 Civil Engineering UFC 3-201-02 Landscape Architecture UFC 3-210-10 Low Impact Development UFC 3-220-01 Geotechnical Engineering UFC 3-220-04FA Backfill for Subsurface Structures UFC 3-220-05 Dewatering and Groundwater Control UFC 3-220-06 Grouting Methods and Equipment UFC 3-220-08FA Engineering Use of Geotextiles UFC 3-220-10N Soil Mechanics UFC 3-230-01 Water Storage, Distribution, and Transmission UFC 3-230-02 O&M: Water Supply Systems UFC 3-230-03 Water Treatment UFC 3-230-06A Subsurface Drainage UFC 3-240-01 Wastewater Collection http://www.wbdg.org/

UFC 3-240-02 Domestic Wastewater Treatment UFC 3-240-03N Wastewater Treatment System Augmenting Handbook Operation and Maintenance UFC 3-240-05A Solid Waste Incineration UFC 3-240-10A Sanitary Landfill UFC 3-240-13FN Industrial Water Treatment Operation and Maintenance UFC 3-250-01FA Pavement Design for Roads, Streets, Walks, and Open Storage Areas UFC 3-250-03 Standard Practice Manual for Flexible Pavements UFC 3-250-04 Standard Practice for Concrete Pavements UFC 3-250-06 Repair of Rigid Pavements Using Epoxy Resin Grouts, Mortars and Concretes UFC 3-250-07 Standard Practice for Pavement Recycling UFC 3-250-08FA Standard Practice for Sealing Joints and Cracks in Rigid and Flexible Pavements UFC 3-250-09FA Aggregate Surfaced Roads and Airfields Areas UFC 3-250-11 Soil Stabilization for Pavements UFC 3-260-01 Airfield and Heliport Planning and Design UFC 3-260-02 Pavement Design for Airfields UFC 3-260-03 Airfield Pavement Evaluation UFC 3-260-05A Marking of Army Airfield Heliport Operational and Maintenance Facilities UFC 3-260-11FA Model Design-Build (D-B) Request for Proposal (RFP) For Airfield Contracts UFC 3-260-16FA Airfield Pavement Condition Survey Procedures Pavements UFC 3-260-17 Dust Control for Roads, Airfields and Adjacent Areas UFC 3-270-01 Asphalt Maintenance and Repair UFC 3-270-02 Asphalt Crack Repair UFC 3-270-03 Concrete Crack and Partial-Depth Spall Repair UFC 3-270-04 Concrete Repair UFC 3-270-05 Paver Concrete Surfaced Airfields Pavement Condition Index (PCI) UFC 3-270-06 Paver Asphalt Surfaced Airfields Pavement Condition Index (PCI) UFC 3-270-07 O&M: Airfield Damage Repair UFC 3-270-08 Pavement Maintenance Management UFC 3-280-01A Guidance for Ground Water/Fuel Extraction and Ground Water Injection Systems UFC 3-280-04 Army Filtration of Liquids

SERIES 3-300: STRUCTURAL AND SEISMIC DESIGN

UFC 3-301-01 Structural Engineering UFC 3-310-04 Seismic Design for Buildings UFC 3-310-08 Non-Expeditionary Bridge Inspection, Maintenance and Repair UFC 3-320-06A Concrete Floor Slabs on Grade Subjected to Heavy Loads UFC 3-340-01 Design and Analysis of Hardened Structures to Conventional Weapons Effects UFC 3-340-02 Structures to Resist the Effects of Accidental Explosions

SERIES 3-400: MECHANICAL

UFC 3-400-02 Design: Engineering Weather Data UFC 3-401-01 Mechanical Engineering UFC 3-410-01 Heating, Ventilating, and Air Conditioning Systems UFC 3-410-02 Lonworks (R) Direct Digital Control for HVAC and Other Local Building Systems UFC 3-410-04N Industrial Ventilation UFC 3-420-01 Plumbing Systems UFC 3-420-02FA Compressed Air UFC 3-430-01FA Heating and Cooling Distribution Systems UFC 3-430-02FA Central Steam Boiler Plants UFC 3-430-07 Operations and Maintenance: Inspection and Certification of Boilers and Unfired Pressure Vessels UFC 3-430-08N Central Heating Plants UFC 3-430-09 Exterior Mechanical Utility Distribution

UFC 3-430-11 Boiler Control Systems UFC 3-440-01 Active Solar Preheat Systems UFC 3-440-04N Solar Heating of Buildings and Domestic Hot Water UFC 3-440-05N Tropical Engineering UFC 3-450-01 Noise and Vibration Control UFC 3-460-01 Design: Petroleum Fuel Facilities UFC 3-460-03 O&M: Maintenance of Petroleum Systems UFC 3-470-01 Lonworks (R) Utility Monitoring and Control System (UMCS)

SERIES 3-500: ELECTRICAL

UFC 3-501-01 Electrical Engineering UFC 3-510-01 Foreign Voltages and Frequencies Guide UFC 3-520-01 Interior Electrical Systems UFC 3-520-05 Stationary Battery Areas UFC 3-530-01 Design: Interior and Exterior Lighting and Controls UFC 3-535-01 Visual Air Navigation Facilities UFC 3-540-01 Engine-Driven Generator Systems for Backup Power Applications UFC 3-550-01 Exterior Electrical Power Distribution UFC 3-555-01N 400 Hertz Medium Voltage Conversion/Distribution and Low Voltage Utilization Systems UFC 3-560-01 Electrical Safety, O&M UFC 3-570-02A Cathodic Protection UFC 3-570-02N Electrical Engineering Cathodic Protection UFC 3-570-06 O&M: Cathodic Protection Systems UFC 3-575-01 Lightning and Static Electricity Protection Systems UFC 3-580-01 Telecommunications Building Cabling Systems Planning and Design UFC 3-580-10 Navy and Marine Corps Intranet (NMCI) Standard Construction Practices

SERIES 3-600: FIRE PROTECTION

UFC 3-600-01 Fire Protection Engineering for Facilities UFC 3-601-02 Operations and Maintenance: Inspection, Testing, and Maintenance of Fire Protection Systems

SERIES 3-700: COST ENGINEERING

UFC 3-701-01 DoD Facilities Pricing Guide; see also FY14 Supplemental Documentation and FY14 Unabridged Area Cost Factors UFC 3-710-01A Code 3 Design with Parametric Estimating UFC 3-730-01 Programming Cost Estimates for Military Construction UFC 3-740-05 Handbook: Construction Cost Estimating

SERIES 4: MULTI-DISCIPLINARY AND FACILITY-SPECIFIC DESIGN

UFC 4-010-01 DoD Minimum Antiterrorism Standards for Buildings UFC 4-010-02 DoD Minimum Antiterrorism Standoff Distances for Buildings UFC 4-010-03 Security Engineering: Physical Security Measures for High-Risk Personnel UFC 4-010-05 Sensitive Compartmented Information Facilities Planning, Design, and Construction UFC 4-020-01 DoD Security Engineering Facilities Planning Manual UFC 4-020-02FA Security Engineering: Concept Design UFC 4-020-03FA Security Engineering: Final Design UFC 4-021-01 Design and O&M: Mass Notification Systems UFC 4-021-02 Electronic Security Systems UFC 4-022-01 Security Engineering: Entry Control Facilities / Access Control Points UFC 4-022-02 Selection and Application of Vehicle Barriers UFC 4-022-03 Security Fences and Gates UFC 4-023-03 Design of Buildings to Resist Progressive Collapse UFC 4-023-07 Design to Resist Direct Fire Weapons Effects

UFC 4-024-01 Security Engineering: Procedures for Designing Airborne Chemical, Biological, and Radiological Protection for Buildings UFC 4-025-01 Security Engineering: Waterfront Security

SERIES 4-100: OPERATIONAL AND TRAINING FACILITIES

UFC 4-121-10N Design: Aircraft Fixed Point Utility Systems UFC 4-133-01N Navy Air Traffic Control Facilities UFC 4-141-04 Emergency Operations Center Planning and Design UFC 4-141-10N Design: Aviation Operation and Support Facilities UFC 4-150-02 Dockside Utilities for Ship Service UFC 4-150-06 Military Harbors and Coastal Facilities UFC 4-150-07 Maintenance and Operation: Maintenance of Waterfront Facilities UFC 4-150-08 Inspection of Mooring Hardware UFC 4-151-10 General Criteria for Waterfront Construction UFC 4-152-01 Design: Piers and Wharves UFC 4-152-07 Design: Small Craft Berthing Facilities UFC 4-159-01N Design: Hyperbaric Facilities UFC 4-159-03 Design: Moorings UFC 4-171-01N Design: Aviation Training Facilities UFC 4-171-04AN Band Training Facilities UFC 4-171-05 Army Reserve Facilities FC 4-171-06N Navy Operational Support Center UFC 4-179-01 Design: Navy Firefighting School Facilities

SERIES 4-200: MAINTENANCE AND PRODUCTION FACILITIES

UFC 4-211-01N Aircraft Maintenance Hangars: Type I, Type II and Type III; also see the Supplement

ITG FY10-01

UFC 4-211-02 Aircraft Corrosion Control and Paint Facilities UFC 4-212-01N Navy Engine Test Cells UFC 4-213-10 Design: Graving Drydocks UFC 4-213-12 Drydocking Facilities Characteristics UFC 4-214-03 Central Vehicle Wash Facilities

SERIES 4-300: RESEARCH, DEVELOPMENT, TEST AND EVALUATION FACILITIES

UFC 4-310-02N Design: Clean Rooms UFC 4-390-01 O&M: Unmanned Pressure Test Facilities Safety Certification Manual

SERIES 4-400: SUPPLY FACILITIES

UFC 4-440-01 Warehouses and Storage Facilities UFC 4-451-10N Design: Hazardous Waste Storage

SERIES 4-500: HOSPITAL AND MEDICAL FACILITIES

UFC 4-510-01 Design: Military Medical Facilities

SERIES 4-600: ADMINISTRATIVE FACILITIES

UFC 4-610-01 Administrative Facilities

SERIES 4-700: HOUSING AND COMMUNITY FACILITIES

UFC 4-711-01 Family Housing UFC 4-720-01 Lodging Facilities FC 4-721-10N Navy and Marine Corps Unaccompanied Housing FC 4-722-01F Air Force Dining Facilities FC 4-722-01N Navy and Marine Corps Dining Facilities UFC 4-730-01 Family Service Centers UFC 4-730-04AN Military Police Facilities UFC 4-730-10 Fire Stations FC 4-730-10N Navy and Marine Corps Fire Stations UFC 4-740-01NF Design: Bowling Centers

FC 4-740-02F Air Force Fitness Centers FC 4-740-02N Navy and Marine Corps Fitness Centers UFC 4-740-03 Design: Navy and Marine Corps Outdoor Adventure Centers and Rental Centers UFC 4-740-06 Youth Centers UFC 4-740-14 Design: Child Development Centers FC 4-740-14N Navy and Marine Corps Child Development Centers UFC 4-740-15 Continuous Child Care Facilities UFC 4-740-16 Design: Military Recreation Centers UFC 4-740-20 Libraries UFC 4-750-01NF Design: Golf Clubhouses UFC 4-750-02N Design: Outdoor Sports and Recreational Facilities FC 4-760-10N Navy Museums and Historic Resource Facilities

SERIES 4-800: UTILITIES AND GROUND IMPROVEMENTS

UFC 4-826-10 Design: Refrigeration Systems for Cold Storage UFC 4-832-01N Design: Industrial and Oily Wastewater Control UFC 4-860-01FA Railroad Design and Rehabilitation UFC 4-860-03 Railroad Track Maintenance and Safety Standards

ENGINEERING TECHNICAL LETTERS (ETL) (See www.wbdg.org for most recent version) 91-1 Fire Protection Engineering Criteria - Testing Halon Fire Suppression Systems 91-4 Site Selection Criteria for Fire Protection Training Areas 94-6 Fire Protection Engineering Criteria and Technical Guidance - Removal of Halogenated Agent

Fire Suppression Systems 95-1 Halon 1301 Management Planning Guidance 96-4 Temporary Joint Sealing Details and Procedures for Pavements 96-5 Hangar Concrete Floor Reflective Coating Criteria 97-2 Maintenance and Repair of Rigid Airfield Pavement Surfaces, Joints, and Cracks 97-3 Base Course Proof Rolling Requirements 97-5 Proportioning Concrete Mixtures with Graded Aggregates for Rigid Airfield Pavements 97-9 Criteria and Guidance for C-17 Contingency Operations on Semi-Prepared Airfields 97-16 Pavement Marking Systems for Low Temperature Applications 97-17 Paint and Rubber Removal from Roadway and Airfield Pavements 97-18 Guide Specification for Airfield and Roadway Marking 97-22 Competing Facility Keying Systems 98-1 Design Criteria for Aggregate Surfaced Helicopter Slide Areas and Heliports 98-4 Building Manager Energy Conservation Handbook 98-8 Fire Protection Engineering Criteria – Existing Aircraft Facilities 98-10 Installation and Operation Guide for the Stanley Hydraulic Power Unit 99-1 Treatment and Disposal of Aircraft Washwater Effluent 99-4 Fire Protection Engineering Criteria - Emergency Lighting and Marking of Exits 00-1 EPA Guideline Items in Construction and Other Engineering Specifications 00-2 Inspection and Testing of Trim Pad Anchoring Systems 00-7 Fire Protection Engineering Criteria — Correlation of US and Host Nation Codes and Criteria 00-9 Airblast Protection Retrofit for Unreinforced Concrete Masonry Walls 01-1 Reliability and Maintainability (R&M) Design Checklist 01-4 Fire Protection Engineering Criteria - Protective and Hardened Aircraft Shelters 01-7 Large Aggregate Asphalt Mixtures 01-8 Resin Modified Pavement Design and Application Criteria 01-9 Procedures to Retard Reflective Cracking 01-10 Design and Construction of High-Capacity Trim Pad Anchoring Systems 01-18 Fire Protection Engineering Criteria – Electronic Equipment Installations http://www.wbdg.org/

02-4 Airblast Protection Polymer Retrofit of Unreinforced Concrete Masonry Walls 02-7 Preventing Concrete Deterioration Under B-1 Aircraft 02-8 Silicone Joint Sealant Specification for Airfield Pavements 02-9 Construction Signs 02-10 Airblast Protection Retrofit of Lightweight Manufactured Structures 02-12 Communications and Information System Criteria for Air Force Facilities 02-15 Fire Protection Engineering Criteria – New Aircraft Facilities 02-16 Design, Construction, Maintenance, and Evaluation of the Pegasus Glacial Ice Runway for Heavy

Wheeled Aircraft Operations 02-19 Airfield Pavement Evaluation Standards and Procedures 03-1 Storm Water Construction Standards 03-4 Alternate Fuels E85 and B20 03-5 Converting Civil Engineering Radio Frequency Devices to Narrowband Technology 04-2 Standard Airfield Pavement Marking Schemes 04-3 Design Criteria for Prevention of Mold in Air Force Facilities 04-4 Trenchless Technology (TT) for Crossing Air Force Pavements 04-5 Design Recommendations for Potable Water System Security (FOUO) 04-6 Inspection of Drainage Systems 04-9 Pavement Engineering Assessment (EA) Standards 04-10 Determining the Need for Runway Rubber Removal 05-1 Use of Acrylic Diffusers with Metal Halide Fixtures 05-8 Use of Off-the-Shelf Concrete Admixtures as Cold Weather Admixture Systems (CWAS) 06-2 Alkali-Aggregate Reaction in Portland Cement Concrete (PCC) Airfield Pavements 06-4 Expedient Trim Pad Anchoring Systems 06-6 Interim Swaged End Inspection Criteria for Aircraft Arresting System (AAS) Pendants 07-1 Design Criteria for Underground Electrical Distribution Systems Using Directional Boring (DB)

Installation Methods for Installing High Density Polyethylene Electrical (HDPE) Conduit 07-2 Anchoring a Fiberglass Mat Assembly in Asphalt Concrete (AC) Pavement 07-3 Jet Engine Thrust Standoff Requirements for Airfield Asphalt Edge Pavements 07-4 Air Force Carpet Standard 07-6 Risk Assessment Procedure for Recycling Portland Cement Concrete (PCC) Suffering from

Alkali-Silica Reaction (ASR) in Airfield Pavement Structures 07-7 Compact Fluorescent Lamp (CFL) Applications (FOUO) 07-8 Spall Repair of Portland Cement Concrete (PCC) Airfield Pavements in Expeditionary

Environments 07-10 Evaluation and Restoration of Folded Fiberglass Mats (FFM) 07-12 Design, Construction, Maintenance, and Evaluation of the McMurdo Sound Sea Ice Runway for

Heavy Wheeled Aircraft Operations 08-1 Evaluation Criteria for Aged Asphalt Concrete (AC) Surfaces 08-2 Testing Protocol for Rigid Spall Repair Materials 08-3 Crater Repair Methods Using Rapid-Setting (RS) Materials (FOUO) 08-4 Testing Protocol for Polymeric Spall Repair Materials 08-6 Design of Surface Drainage Facilities 08-10 Alternative Water Sources - Use of Non- Potable Water 08-13 Incorporating Sustainable Design and Development (SDD) and Facility Energy Attributes in the

Air Force Construction Program 08-14 Structural Evaluation Procedure for Stabilized Soil-Surfaced Airfields 09-1 Airfield Planning and Design Criteria for Unmanned Aircraft Systems (UAS) 09-2 Contingency Airfield Pavement Specifications 09-3 Chemical Dust Control for Contingency Roads, Base Camps, Helipads, and Airfields 09-4 Fire Protection Engineering Criteria – Expeditionary and Force Projection Operational Theaters

09-6 C-130 and C-17 Landing Zone (LZ) Dimensional, Marking, and Lighting Criteria (FOUO) 09-10 Aurora Electrical System Vulnerability Assessment and Mitigation Actions (FOUO) 09-13 Irrigation of Installation Turfgrass and Landscaping 10-3 Procedures and Acceptance Criteria for Protective Materials Resistant to 155 mm and Smaller

Fragmenting Munitions 10-5 Self-Help Pest and Vegetation Management Program 10-6 External Foam Insulation of Temporary Structures 10-7 Connection Methods For Standby Generators - 600 Volts or Less 11-1 Civil Engineer Industrial Control System Information Assurance Compliance 11-3 Warm Mix Asphalt (WMA) 11-4 Airfield Pavement Drainage Layers 11-6 Utilities Reporting for Air Force Facilities 11-7 Nuclear Weapons-Capable Maintenance and Storage Facilities 11-8 Decision Criteria for Installing Vegetative Green Roofs at CONUS Installations 11-9 Electrical Manhole Entry and Work Procedures 11-10 Electrical Manhole Design Considerations 11-12 Grounding, Bonding, Testing, and Recordkeeping for Communications Facilities 11-15 Repairing and Backfilling Earthen Structures with Flowable Fill 11-18 Small Arms Range Design and Construction 11-21 Emergency and Standby Generator Design, Maintenance, and Testing Criteria 11-22 Water Distribution Lines Leak Detection 11-24 Energy Savings Performance Contracts (ESPC) 11-25 Implementation of Major and Area Source Rules as Applied to Boiler Tune-ups and Energy

Assessments for the Boiler MACT Rule 11-26 Using Asphalt Surface Treatments as Preventive Maintenance on Asphalt Airfield Pavements 11-27 Solar Lighting for Airfields 11-28 Mandatory Review and Update of Record Drawings for Nuclear-Capable Weapons and

Munitions Storage and Maintenance Facilities 11-29 Use of Light-Emitting Diode (LED) Fixtures in Airfield Lighting Systems on Air Force

Installations and Enduring/Contingency Locations 12-1 Recommendations for Incorporating Water System Emergency Response Plan Requirements 12-7 Repair of Cement-Stabilized Soil (CSS) Surfaces 12-8 Contingency Aircraft Mooring Points in Portland Cement Concrete Pavements 12-9 Personnel Certification Requirements for Inspection of Lightning Protection Systems (LPS) on

Nuclear Weapons Maintenance, Handling, and Storage Facilities 12-10 Utility Energy Service Contracts (UESC) 12-12 Solar-Powered Light-Emitting Diode (LED) Fixture Design and Installation Criteria for Exterior

Lighting Applications in Contingency Environments 12-15 LED Fixture Design and Installation Criteria for Interior and Exterior Lighting Applications 13-2 Design, Construction, Operations and Maintenance of Semi-perminant Wastewater Treatment Plants at Contingency Locations 13-2 Minimum Airfield Operating Surface Selection and Repair Quality Criteria 13-4 Standby Generator Design, Maintenance, and Testing Criteria 13-6 Energy-Efficient Motors and Adjustable Speed Drives 13-13 Energy Savings Performance Contracts (ESPC) 14-1 Construction and Operation and Maintenance Guidance for Storm Water Systems 14-2 Preventing and Repairing Concrete Deterioration Under MV-22 and CV-22 Aircraft 14-3 Preventative Maintenance Plan (PMP) for Airfield Pavements 14-4 Vertical Landing Zone (VLZ) and Other Airfield Pavement Design and Construction Using High Temperature Concrete

14-5 Requirements for Wear of Military Uniforms with Arc Thermal Performance Value- (ATPV-) Rated Personal Protective Equipment (PPE) 14-10 Sustainment Pavement Repair (SuPR) Kit

Energy Policy Act