083100 access doors and panels.doc
DOC document 36 KB Posted
- Attached to
- Construct Addition/Fire Suppression B104
- Solicitation number
- FA6656-09-R-0005
About this file
Specification Section 08 31 00 Access Doors and Panels
View the file
Other files
Show 40 more
Latest 50 of 145 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTION 08 31 00
ACCESS DOORS AND PANELS
PART 1 – GENERAL
1.01 Related Documents
A.
Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
1.02 sUMMARY
A.
This Section includes standard formed‑metal hinged access doors/panels and frames.
B.
Related Sections:
1.
Section 09 29 00 – Gypsum Board: Substrate and framing to receive access doors/panel and frame.
2.
Section 09 30 00 – Tiling: Preparation of adjacent work to receive access doors/panel and frame.
1.03
REFERENCES
A.
Definitions:
1.
Or approved equal = Products similar to those listed immediately above and equivalent in quality, function, durability, and longevity (as determined by the Contracting Officer).
Reference Standards: The publications listed below form a part of this Section to the extent referenced. The publications are referred to within the text by the basic designation only.
ASTM International:
a.
Standard Specification for Stainless and Heat‑Resisting Chromium‑Nickel‑Steel Plate, Sheet, and Strip (ASTM A‑167‑99).
b.
Standard Specification for Steel, Sheet, Cold‑Rolled, Carbon, Structural, High‑Strength Low‑Alloy, High‑Strength Low‑Alloy with Improved Formability, Solution Hardened, Baked Hardenable (ASTM A‑1008 / A‑1008‑05).
c.
Standard Specification for Steel, Sheet and Strip, Hot‑Rolled, Carbon, Structural, High‑Strength Low‑Alloy and High‑Strength Low‑Alloy with Improved Formability (ASTM A‑1011 / A‑1011M‑05).
d.
Standard Specification for Aluminum and Aluminum‑Alloy Sheet and Plate (ASTM B‑209‑00).
e.
Standard Specification for Aluminum and Aluminum‑Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (ASTM B‑221‑00).
1.04
ACTION SUBMITTALS
A.
General: Submit the following per the General Requirements.
B.
Action Submittals: Product Data.
PART 2 – PRODUCTS
2.01
MANUFACTURERS
A.
The design is based on the products of Milcor Incorporated, Gibraltar Company, Lima OH (Website: www.milcorinc.com, Voice: 800.528.1411). Subject to compliance with the requirements of this Section ‑ and the Buy America Act, provide either the named products or comparable products by one of the following Access Door Manufacturers:
Karp Associates, Incorporated, Maspeth NY (Website: www.karpinc.com, Voice: 800.888.4212).
Larsen's Manufacturing Company, Minneapolis MN (Website: www.larsensmfg.com, Voice: 800.527.7367).
3.
Nystrom Building Products, Minneapolis MN (Website: www.nystrom.com, Voice: 800.547.2635).
4.
Williams Brothers Corporation of America, Front Royal VA (Website: www.wbdoors.com, Voice: 800.255.5515).
5.
Or approved equal.
2.02
MATERIALS
Fabricate doors/panels from:
Stainless steel per ASTM A‑167.
2.03 Manufactured Units
Standard Type:
Access Panel Type:
In Gypsum Board Ceilings: DW by Milcor.
In Gypsum Wallboard Walls: MS by Milcor.
In Ceramic Tile Walls: MS by Milcor.
2.04 Fabrication
General: Access doors/panels and frames shall be the Access Door Manufacturer's standard unit consisting of door/panel, frame, hardware, accessory parts, anchors, and fasteners.
Fabricate frame from specified metal with:
Stiffened edges.
Welded joints ground smooth.
c.
Welded attachments for anchoring/securing to construction.
Fabricate door/panel hinged to frame. Provide the number of latches/locks recommended by the Access Door Manufacturer for the size furnished. Furnish plastic or metal grommet to protect holes made for access to latch/lock.
Type of Access Door/Panel:
Door/panel and frame shall be 16‑gauge stainless steel. Provide two steel hinges and the Access Door Manufacturer's standard flush cylinder lock(s).
2.05 FINISHes
Provide stainless steel in a brushed finish.
Exception for Ceilings: Provide factory‑finished white.
PART 3 – EXECUTION
3.01
INSTALLATION
A.
Install access door/panel and frame per the Access Door Manufacturer's recommendation. Install face flush with adjacent surfaces.
3.02 Adjusting
Adjust hardware and door for proper operation.
END OF SECTIOn 08 31 00 this page is iNtentionally blank.
08 31 00-4
ACCESS DOORS AND PANELS
12910-330
Revised 3/2/09
12910-330
ACCESS DOORS AND PANELS
08 31 00-3
Revised 3/2/09
File details come from the government source that posted it. Updated .