8-Specification 4.pdf

P a g e 1 | 4

Ford F150 Light Truck Ext Cab

PCNs: 163780, 163960, 163956, 163955, 163961, 167653,163959, 163958, & 169671

Specifications:

- Classification: 2A Light Truck (GVWR 6,001-8,500 lbs.)

- Extended Cab

- Standard bed (6.5’ Style side)

- 6-cylinder flex fuel engine, 3.3 L or equivalent with auto start/stop

- Automatic transmission

- 4x4

- Vinyl 40/20/40 front seat

- Class IV trailer hitch receiver

- Power windows, locks, sideview mirrors, power tailgate lock, keyless entry, alarm

- Rear view camera with dynamic hitch assist

- Reverse sensing system

- Blind spot warning system

- Wheels: 17" silver steel, tires: LT245/75RX17E BSW A/S

- Back up alarm

- SYNC voice recognition system

- Wireless cell phone charger on center console

- Exterior Color: Oxford White (or equivalent)

- Interior Color: Black Medium Dark Slate (or equivalent)

- Deep tint film on all sides and rear windows

Required Upfit:

- 12V power outlet on dash

- ARKON- TAB806 Slim-Grip Tablet Holder with Drill Base Mount and TCMKB-B Keyboard Tray

- 1500-Watt inverter installed behind driver seat or under rear of seat to include installation with

1/0 GPT insulated copper wire with rating that meets SAE code j1128 and temp rating of -400 C to 850 C, power/ground and ignition control solenoid

- Deep tint on 4 doors glass and back glass

- Spray in bedliner

- HD aluminum toolbox with low-profile lid and 14” depth

- Running boards

- Remote power distribution point (see below for details)

- Whelen Vertex 4 corner LED lights (see below for details)

Specification 4

P a g e 2 | 4

(continued next page)

THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY

ASSOCIATED FEES

IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.

THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY

UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.

DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE

OF, OR EQUIVALENT TO BELOW DIAGRAM.

P a g e 3 | 4

4 Corner LED Requirements

4 Corner LED Lights / Formerly Called Strobes (VENDOR):

INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN USING

RED CIRCLES IN ATTACHED PICTURES

Pictures for strobes are for reference use only

P a g e 4 | 4

Pictures for strobes are for reference use only

ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS’ GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN OPERATION. THE

COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.