11-Specification 17.pdf
PDF 873 KB Posted
- Solicitation number
- ITB-26-00040
- Issued by
- Hillsborough County, Florida
About this file
This document is a vehicle specification for Hillsborough County Fleet Management detailing the procurement of a Ford F150 Light Truck Extended Cab with specific configuration and upfit requirements. The specification (PCN: 168587) outlines a standard F150 with part-time four-wheel drive, a 6.5-foot bed, and numerous standard features including power windows, keyless entry, backup camera, pre-collision assist, and blind spot monitoring. The truck will be finished in Oxford White with a Dark Slate interior and requires specific upfitting, including an ARKON tablet holder, keyboard tray, 1500-watt inverter, spray-in bedliner, and a Whelen Vertex 4 Corner LED Kit with white directional lights installed at each corner of the front grille and rear bumper.
The dealer is responsible for providing title, county tag, registration, and all associated documentation, including two-way overnight shipping. They must also arrange offload capabilities and provide quarterly updates on the build/order status to Hillsborough County Fleet Management. The specification includes detailed requirements for electrical modifications, mandating that the dealer not utilize OEM wiring for add-ons and install a remote power distribution point according to specified guidelines. The 4 Corner LED lights must be white, controlled by a dashboard-mounted toggle switch, and installed in compliance with manufacturer guidelines, with all wiring secured to prevent chafing or snagging and the complete circuit fuse-protected.
View the file
Other files
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
P a g e 1 | 4
Ford F150 Light Truck Extended Cab 6.5
PCN: 168587
Specifications:
- Standard gas engine
- Standard transmission
- Standard bed (6.5’)
- Part-time four-wheel drive
- Standard axle ratio
- Offroad / All-terrain tires: P265/70R17
- Front 40-20-40 Vinyl split bench seat
- Power windows
- Power door locks
- Keyless entry & Illuminated entry
- Manual folding power glass sideview mirrors
- Reverse Sensing
- Backup Alarm
- Standard AM/FM radio with wireless phone connectivity (Bluetooth capable)
- Spray-In bedliner
- Class IV Trailer hitch receiver & Trailer Tow Package (includes harness with 7-pin-to-4-pin adapter)
- Rearview camera with dynamic hitch assist
- Pre-collision assist with Automatic Emergency Braking and Forward Collision Warning
- Blind spot monitor with cross-traffic alert
- 180/360 degree camera
- 12v outlet on dash
- Wireless cell phone charger
- Exterior Color: Oxford White (or equivalent)
- Interior Color: Dark Slate (or equivalent)
- Deep tint film on all sides and rear windows
Required Upfit:
- ARKON TAB806 Slim-Grip Tablet Holder with Drill Base Mount
- ARKON TCMKB-B Keyboard Tray
- Spray-in bedliner
- 1500-Watt inverter – To be installed behind driver seat or under rear of seat, to include installation in full accordance with inverter manufacturer’s requirements. Inverter to be controlled by separate fused switch for on/off.
- Whelen Vertex 4 Corner LED Kit (see below for more information)
- New Yellow County Tag
(continued next page)
Specification 17
P a g e 2 | 4
THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY
ASSOCIATED FEES
IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.
THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY
UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.
DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE
OF, OR EQUIVALENT TO BELOW DIAGRAM.
P a g e 3 | 4
4 Corner LED Requirements
4 Corner LED Lights / Formerly Called Strobes (VENDOR):
INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN
USING RED CIRCLES IN ATTACHED PICTURES.
Pictures are for reference use only
P a g e 4 | 4
Pictures are for reference use only
ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN
OPERATION. THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.
File details come from the government source that posted it. Updated .