22-Specification 10.pdf

P a g e 1 | 4

Ford F150 Light Truck 4WD Regular Cab 6.5' Box

PCN: 169745

Specifications:

- Classification: 2a light truck o (GVWR 6,001 – 8,500 lbs.)

- 3.5L V6 flex fuel engine or equivalent

- 6-spd auto transmission or equivalent

- 4x4 part time drive

- 6.5’ box

- Regular cab

- Vinyl 40/20/40 split bench

- 3:73 e-locking rear differential

- Manual-folding, Power Glass Sideview Mirrors

- Trailer tow pkg with trans oil cooler, class iv receiver, smart trailer tow connector 4/7 pin harness, engine oil cooler, front stabilizer bar

- Class iv trailer hitch receiver

- Pintle Combination with 2" ball

- Daytime running lamps (std)

- Wheels: 17" silver steel

- Tires: P265/70R17 All-Terrain

- Back up alarm

- Exterior Color: Oxford White (or equivalent)

- Interior Color: Black Medium Dark Slate (or equivalent)

- Deep tint film on all sides and rear windows

Required Upfit:

- 85 Gallon Fuel n Tool Combo with L-shaped fuel tank, toolbox, 13GPM fuel transfer pump, hose, nozzle, and GPI inline digital flow meter.

- Window tint on all door glass and rear windshield

- Heavy duty spray on bedliner

- Whelen vertex 4 corner hide away led strobes installed (2) inside headlamps or grille (2) installed inside tail lamps

- Remote power distribution point

(continued next page)

Specification 10

P a g e 2 | 4

THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY

ASSOCIATED FEES

IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.

THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY

UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.

DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE

OF, OR EQUIVALENT TO BELOW DIAGRAM.

P a g e 3 | 4

4 Corner LED Requirements

4 Corner LED Lights / Formerly Called Strobes (VENDOR):

INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN USING

RED CIRCLES IN ATTACHED PICTURES.

Pictures for strobes are for reference use only

P a g e 4 | 4

Pictures for strobes are for reference use only

ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN OPERATION.

THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.