5-Specification 2.pdf
PDF 969 KB Posted
- Solicitation number
- ITB-26-00040
- Issued by
- Hillsborough County, Florida
About this file
This document is a vehicle specification for Hillsborough County Fleet Management detailing the procurement of a Ford F150 Light Truck with specific equipment requirements. The specification outlines a 4WD Extended Cab Long Bed truck with an 8-cylinder gasoline engine, automatic transmission, and 4x4 capabilities, to be finished in Oxford White with a Black Medium Dark Slate interior. Required upfits include a cross body toolbox, brush guard, 12,000 lb. winch, and four corner LED lights in white.
The dealer is responsible for providing title, county tag, registration, and all associated documentation, including temporary tags. Additional requirements mandate quarterly updates on build/order status, proper power distribution point installation, and specific LED light placement and wiring guidelines. The dealer must not use OEM wiring for equipment add-ons and must follow manufacturer guidelines for mounting and controlling the LED lights, which should be activatable via a dashboard-mounted toggle switch independent of vehicle ignition.
View the file
Other files
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
P a g e 1 | 4
Ford F150 Light Truck 4WD Extended Cab Long Bed
PCN: 164304
Specifications:
- 8-cylinder gasoline engine
- Automatic transmission
- Long bed
- 4x4 with auto locking hubs and manual override
- Towing package
- Off-road tires
- Spray on bedliner
- Power mirrors
- Cruise control
- Exterior Color: Oxford White (or equivalent)
- Interior Color: Black Medium Dark Slate (or equivalent)
- Deep tint film on all sides and rear windows
Required Upfit:
- Cross body toolbox mounted in bed
- Brush guard
- 12,000 lb. winch
- Four corner LED lights
(continued next page)
Specification 2
P a g e 2 | 4
THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY
ASSOCIATED FEES
IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.
THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM
QUARTERLY UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.
DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND
BE OF, OR EQUIVALENT TO BELOW DIAGRAM.
P a g e 3 | 4
4 Corner LED Requirements
4 Corner LED Lights / Formerly Called Strobes (VENDOR):
INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN
USING RED CIRCLES IN ATTACHED BELOW PICTURES.
Pictures for strobes are for reference use only
P a g e 4 | 4
Pictures for strobes are for reference use only
ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN
OPERATION. THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.
File details come from the government source that posted it. Updated .