10-Specification 18.pdf

P a g e 1 | 4

Ford F150 Light Truck 4WD Extended Cab

PCN: 157777

Specifications:

- 290 minimum horsepower V-6 engine with minimum of 265 lb.-ft of torque with Auto Start / Stop (equal to or greater)

- Regular unleaded fuel type & Flex fuel capability

- 10-Speed automatic transmission with overdrive & selectable drive modes (or equivalent)

- Part-time four-wheel drive

- 3.73 axle ratio with Electronic Locking (or equivalent)

- P265/70SR17 All-Terrain front and rear tires with 17” silver steel wheels (or equivalent)

- Front 40-20-40 Vinyl split bench seat

- Power windows

- Power door locks

- Power tailgate lock

- Keyless entry & Illuminated entry

- Perimeter alarm

- Manual folding power glass sideview mirrors

- Reverse Sensing

- Reverse Camera

- Daytime Running Lamps

- Backup Alarm

- Wireless phone connectivity (Bluetooth capable)

- Tough Spray-In bedliner

- Class IV Trailer hitch receiver & Trailer Tow Package (includes harness with 7-pin-to-4-pin adapter)

- Exterior Color: Oxford White (or equivalent)

- Interior Color: Black Medium Dark Slate (or equivalent)

- Deep tint film on all sides and rear windows

Required Upfit:

- Tow Pintle hitch combination with 2” Ball

- HD Aluminum bed toolbox with low profile lid and approx. 14” depth

- HAVIS Premium passenger side mounted computer mount stand (or equivalent)

- HAVIS DS-DELL-406 Docking Station for Dell Latitude 14 Notebook PC (or equivalent)

- 1500-Watt power inverter to power Dell Laptop. To be installed behind driver seat or under rear of seat, to include installation in full accordance with inverter manufacturer’s requirements. Inverter to be controlled by separate fused switch for on/off.

(continued next page)

Specification 18

P a g e 2 | 4

THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY

ASSOCIATED FEES

IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.

THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY

UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.

DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE

OF, OR EQUIVALENT TO BELOW DIAGRAM.

P a g e 3 | 4

4 Corner LED Requirements

4 Corner LED Lights / Formerly Called Strobes (VENDOR):

INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN

USING RED CIRCLES IN ATTACHED BELOW PICTURES.

Pictures are for reference use only

P a g e 4 | 4

Pictures are for reference use only

ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN OPERATION. THE COMPLETE CIRCUIT

SHALL BE FUSE PROTECTED.